Rediger

Del via


Upgrade a Data-tier Application

Applies to: SQL Server Azure SQL Database Azure SQL Managed Instance

Use either the Upgrade Data-tier Application Wizard or a Windows PowerShell script to change the schema and properties of a currently deployed data-tier application (DAC) to match the schema and properties defined in a new version of the DAC.

Before You Begin

A DAC upgrade is an in-place process that alters the schema of the existing database to match the schema defined in a new version of the DAC. The new version of the DAC is supplied in a DAC package file. For more information about creating a DAC package, see Data-tier Applications.

Choose DAC Upgrade Options

There are four upgrade options for an in-place upgrade:

  • Ignore Data Loss - If True, the upgrade proceeds even if some operations result in data loss. If False, these operations terminate the upgrade. For example, if a table in the current database isn't present in the schema of the new DAC, the table is dropped if True is specified. The default setting is True.

  • Block on Changes - If True, the upgrade is terminated if the database schema differs from that defined in the previous DAC. If False, the upgrade continues even if changes are detected. The default setting is False.

  • Rollback on Failure - If True, the upgrade is enclosed in a transaction; if errors are encountered, a rollback is attempted. If False, all changes are committed as they're made, and if errors occur, you may have to restore a previous database backup. The default setting is False.

  • Skip Policy Validation - If True, the DAC server selection policy isn't evaluated. If False, the policy is evaluated, and the upgrade terminates if there's a validation error. The default setting is False.

Limitations and Restrictions

DAC upgrades can only be performed in SQL Database, or SQL Server 2005 (9.x) Service Pack 4 (SP4) or later.

Prerequisites

It's prudent to take a full database backup before starting the upgrade. You may need to restore the backup if an upgrade encounters an error and can't roll back all of its changes.

Before starting the upgrade, there are several actions that you should take to validate the DAC package, and the upgrade actions. For more information about how to perform these checks, see Validate a DAC Package.

  • We recommend that you refrain from upgrading using a DAC package from unknown or untrusted sources. Such packages could contain malicious code that might execute unintended Transact-SQL code or cause errors by modifying the schema. Before you use a package from an unknown or untrusted source, unpack the DAC and examine the code, such as stored procedures or other user-defined code.

  • If changes have been made to the current database after the last version of the DAC was deployed, some of the changes may prevent the successful completion of the upgrade or be removed by the upgrade. You should first generate and review a report of any such changes made in the database.

  • It's prudent to generate a list of the schema changes the upgrade will perform and review the list for any problems.

The application name in the DAC package must match the application name of the currently deployed DAC. For example, if the current DAC has an application name of GeneralLedger, you can only upgrade by using a DAC package with an application name of GeneralLedger.

Ensure enough transaction log space is available to log all of the modifications.

Security

To improve security, SQL Server Authentication logins are stored in a DAC package without a password. When the package is deployed or upgraded, the login is created as a disabled login with a generated password. To enable the logins, log in using a log in with ALTER ANY LOGIN permission and use ALTER LOGIN to enable the login and assign a new password to be communicated to the user. This isn't needed for Windows Authentication logins because SQL Server doesn't manage their passwords.

Permissions

A DAC can only be upgraded by members of the sysadmin or serveradmin fixed server roles, or by logins that are in the dbcreator fixed server role and have ALTER ANY LOGIN permissions. The login must be the owner of the existing database. The built-in SQL Server system administrator account named sa can also upgrade a DAC.

Use the Upgrade Data-tier Application Wizard

To Upgrade a DAC Using a Wizard

  1. In Object Explorer, right-click the database containing the DAC to be upgraded.

  2. Expand the Tasks option, and then select the Upgrade Data-tier Applications option.

  3. Complete the wizard dialogs:

    1. Introduction Page

    2. Select Package Page

    3. Detect Change Page

    4. Options Page

    5. Review Upgrade Plan

    6. Summary Page

    7. Upgrade DAC Page

Introduction Page

This page describes the steps for upgrading a data-tier application.

Do not show this page again. - Select the check box to stop the page from being displayed in the future.

Next > - Proceeds to the Select Package page.

Cancel - Terminates the wizard without upgrading the DAC.

Select Package Page

Use this page to specify the DAC package containing the new data-tier application version. The page transitions through two states.

Select the DAC Package

Use the initial state of the page to choose the DAC package to deploy. The DAC package must be a valid DAC package file and must have a .dacpac extension. The DAC application name in the DAC package must be the same as the application name of the current DAC.

DAC Package - Specify the path and file name of the DAC package that contains the new version of the data-tier application. You can select the Browse button at the right of the box to browse to the location of the DAC package.

Application Name - A read-only box that displays the DAC application name assigned when the DAC was authored or extracted from a database.

Version - A read-only box that displays the version assigned when the DAC was authored or extracted from a database.

Description - A read-only box that displays the description written when the DAC was authored or extracted from a database.

< Previous - Returns to the Introduction page.

Next > - Displays a progress bar as the wizard confirms that the selected file is a valid DAC package.

Cancel - Terminates the wizard without upgrading the DAC.

Validate the DAC Package

Displays a progress bar as the wizard confirms that the selected file is a valid DAC package. The wizard proceeds to the Review Policy page if the DAC package is validated. If the file isn't a valid DAC package, the wizard remains on the Select DAC Package page. Either select another valid DAC package or cancel the wizard and generate a new DAC package.

Validating the contents of the DAC - The progress bar that reports the current status of the validation process.

< Previous - Returns to the initial state of the Select Package page.

Next > - Proceeds to the final version of the Select Package page.

Cancel - Terminates the wizard without deploying the DAC.

Detect Change Page

Use this page to report the results of the wizard's check for changes made to the database that make its schema different than the schema definition stored in the DAC metadata in msdb. For example, if CREATE, ALTER, or DROP statements have been used to add, change, or remove objects from the database after the DAC was originally deployed. The page first displays a progress bar, then reports the analysis results.

Detecting change, this may take a few minutes - Displays a progress bar as the wizard checks for differences between the current schema of the database and the objects in the DAC definition.

Change detection results: - Indicates that the analysis has been completed and the results are reported below.

The database DatabaseName has not changed - The wizard detected no differences in the objects defined in the database and their counterparts in the DAC definition.

The database DatabaseName has changed - The wizard detected changes between the objects in the database and their counterparts in the DAC definition.

Proceed despite possible loss of changes - Specifies that you understand some of the objects or data in the current database won't be present in the new database and that you're willing to proceed with the upgrade. You should select this button only if you have analyzed the change report and understand the steps you must perform to manually transfer any objects or data required in the new database. If you aren't sure, select the Save Report button to save the change report, then select Cancel. Analyze the report, plan how to transfer any required objects and data after the upgrade completes, then restart the wizard.

Save Report - Select the button to save a report of the changes the wizard detected between the objects in the database and their counterparts in the DAC definition. You can then review the report to determine if you need to take action after the upgrade completes incorporating some or all of the objects listed in the report into the new database.

< Previous - Returns to the Select DAC Package page.

Next > - Proceeds to the Options page.

Cancel - Terminates the wizard without deploying the DAC.

Options Page

Use this page to select the rollback on failure option for the upgrade.

Rollback on failure - Select this option to enclose the upgrade in a transaction, which the wizard can attempt to roll back if errors occur. For more information about the option, see Choosing DAC Upgrade Options.

Restore Defaults - Returns the option to its default setting of false.

< Previous - Returns to the Detect Change page.

Next > - Proceeds to the Review the Upgrade Plan page.

Cancel - Terminates the wizard without deploying the DAC.

Review the Upgrade Plan Page

Use this page to review the actions the upgrade process takes. Only proceed when you're confident the upgrade won't create problems.

The following actions will be used to upgrade the DAC. - Review the information displayed to ensure the actions taken will be correct. The Action column displays the actions, such as Transact-SQL statements, that will be run to perform the upgrade. The Data Loss column will contain a warning if the associated action could delete data.

Refresh - refreshes the action list.

Save Action Report - saves the contents of the action window to an HTML file.

Proceed despite possible loss of changes - Specifies that you understand some of the objects or data in the current database won't be present in the new database and that you're willing to proceed with the upgrade. You should select this button only if you have analyzed the change report and understand the steps you must perform to manually transfer any objects or data required in the new database. If unsure, select the Save Action Report button to save the change report and the Save Scripts button to save the Transact-SQL script, then select Cancel. Analyze the report and script, plan how to transfer any required objects and data after the upgrade completes, then restart the wizard.

Save Scripts - saves the Transact-SQL statements that will be used to perform the upgrade to a text file.

Restore Defaults - Returns the option to its default setting of false.

< Previous - Returns to the Detect Change page.

Next > - Proceeds to the Summary page.

Cancel - Terminates the wizard without deploying the DAC.

Summary Page

Use this page to review the actions the wizard takes when upgrading the DAC.

The following settings will be used to upgrade your DAC. - Review the information displayed to ensure the actions taken will be correct. The window displays the DAC you selected to be upgraded, and the DAC package containing the new version of the DAC. The window also displays whether the current database version is the same as the current DAC definition or if the database has changed.

< Previous - Returns you to the Review the Upgrade Plan page.

Next > - Deploys the DAC and displays the results in the Upgrade DAC page.

Cancel - Terminates the wizard without deploying the DAC.

Upgrade DAC Page

This page reports the success or failure of the upgrade operation.

Upgrading the DAC - Reports the success or failure of each action taken to upgrade the DAC. Review the information to determine the success or failure of each action. Any action that encountered an error has a link in the Result column. Select the link to view a report of the error for that action.

Save Report - Select this button to save the upgrade report to an HTML file. The file reports the status of each action, including all errors generated by any of the actions. The default folder is a SQL Server Management Studio\DAC Packages folder in the Documents folder of your Windows account.

Finish - Terminates the wizard.

Use PowerShell

To upgrade a DAC using the IncrementalUpgrade() method in a PowerShell script

  1. Create an SMO Server object and set it to the instance that contains the DAC to be upgraded.

  2. Open a ServerConnection object and connect to the same instance.

  3. Use System.IO.File to load the DAC package file.

  4. Use add_DacActionStarted and add_DacActionFinished to subscribe to the DAC upgrade events.

  5. Set the DacUpgradeOptions.

  6. Use the IncrementalUpgrade method to upgrade the DAC.

  7. Close the file stream used to read the DAC package file.

Example (PowerShell)

The following example upgrades a DAC named MyApplication on a default instance of the Database Engine, using a new DAC version in a MyApplication2017.dacpac package.

## Set an SMO Server object to the default instance on the local computer.
CD SQLSERVER:\SQL\localhost\DEFAULT
$srv = get-item .
  
## Open a Common.ServerConnection to the same instance.
$serverconnection = New-Object Microsoft.SqlServer.Management.Common.ServerConnection($srv.ConnectionContext.SqlConnectionObject)
$serverconnection.Connect()
$dacstore = New-Object Microsoft.SqlServer.Management.Dac.DacStore($serverconnection)
  
## Load the DAC package file.
$dacpacPath = "C:\MyDACs\MyApplication2017.dacpac"
$fileStream = [System.IO.File]::Open($dacpacPath,[System.IO.FileMode]::OpenOrCreate)
$dacType = [Microsoft.SqlServer.Management.Dac.DacType]::Load($fileStream)
  
## Subscribe to the DAC upgrade events.
$dacstore.add_DacActionStarted({Write-Host `n`nStarting at $(get-date) :: $_.Description})
$dacstore.add_DacActionFinished({Write-Host Completed at $(get-date) :: $_.Description})
  
## Upgrade the DAC and close the package.
$dacName  = "MyApplication"
  
## Set the upgrade options.
$upgradeProperties = New-Object Microsoft.SqlServer.Management.Dac.DacUpgradeOptions
$upgradeProperties.blockonchanges = $true
$upgradeProperties.ignoredataloss = $false
$upgradeProperties.rollbackonfailure = $true
$ upgradeProperties.skippolicyvalidation = $false
  
## Upgrade the DAC
$dacstore.IncrementalUpgrade($dacName, $dacType, $upgradeProperties)
## Close the package file.
$fileStream.Close()

See also