ASP.NET Core Razor component virtualization
Note
This isn't the latest version of this article. For the current release, see the .NET 8 version of this article.
Warning
This version of ASP.NET Core is no longer supported. For more information, see .NET and .NET Core Support Policy. For the current release, see the .NET 8 version of this article.
Important
This information relates to a pre-release product that may be substantially modified before it's commercially released. Microsoft makes no warranties, express or implied, with respect to the information provided here.
For the current release, see the .NET 8 version of this article.
This article explains how to use component virtualization in ASP.NET Core Blazor apps.
Virtualization
Improve the perceived performance of component rendering using the Blazor framework's built-in virtualization support with the Virtualize<TItem> component. Virtualization is a technique for limiting UI rendering to just the parts that are currently visible. For example, virtualization is helpful when the app must render a long list of items and only a subset of items is required to be visible at any given time.
Use the Virtualize<TItem> component when:
- Rendering a set of data items in a loop.
- Most of the items aren't visible due to scrolling.
- The rendered items are the same size.
When the user scrolls to an arbitrary point in the Virtualize<TItem> component's list of items, the component calculates the visible items to show. Unseen items aren't rendered.
Without virtualization, a typical list might use a C# foreach
loop to render each item in a list. In the following example:
allFlights
is a collection of airplane flights.- The
FlightSummary
component displays details about each flight. - The
@key
directive attribute preserves the relationship of eachFlightSummary
component to its rendered flight by the flight'sFlightId
.
<div style="height:500px;overflow-y:scroll">
@foreach (var flight in allFlights)
{
<FlightSummary @key="flight.FlightId" Details="@flight.Summary" />
}
</div>
If the collection contains thousands of flights, rendering the flights takes a long time and users experience a noticeable UI lag. Most of the flights aren't seen because they fall outside of the height of the <div>
element.
Instead of rendering the entire list of flights at once, replace the foreach
loop in the preceding example with the Virtualize<TItem> component:
Specify
allFlights
as a fixed item source to Virtualize<TItem>.Items. Only the currently visible flights are rendered by the Virtualize<TItem> component.If a non-generic collection supplies the items, for example a collection of DataRow, follow the guidance in the Item provider delegate section to supply the items.
Specify a context for each flight with the
Context
parameter. In the following example,flight
is used as the context, which provides access to each flight's members.
<div style="height:500px;overflow-y:scroll">
<Virtualize Items="allFlights" Context="flight">
<FlightSummary @key="flight.FlightId" Details="@flight.Summary" />
</Virtualize>
</div>
If a context isn't specified with the Context
parameter, use the value of context
in the item content template to access each flight's members:
<div style="height:500px;overflow-y:scroll">
<Virtualize Items="allFlights">
<FlightSummary @key="context.FlightId" Details="@context.Summary" />
</Virtualize>
</div>
The Virtualize<TItem> component:
- Calculates the number of items to render based on the height of the container and the size of the rendered items.
- Recalculates and rerenders the items as the user scrolls.
- Only fetches the slice of records from an external API that correspond to the currently visible region, including overscan, when
ItemsProvider
is used instead ofItems
(see the Item provider delegate section).
The item content for the Virtualize<TItem> component can include:
- Plain HTML and Razor code, as the preceding example shows.
- One or more Razor components.
- A mix of HTML/Razor and Razor components.
Item provider delegate
If you don't want to load all of the items into memory or the collection isn't a generic ICollection<T>, you can specify an items provider delegate method to the component's Virtualize<TItem>.ItemsProvider parameter that asynchronously retrieves the requested items on demand. In the following example, the LoadEmployees
method provides the items to the Virtualize<TItem> component:
<Virtualize Context="employee" ItemsProvider="LoadEmployees">
<p>
@employee.FirstName @employee.LastName has the
job title of @employee.JobTitle.
</p>
</Virtualize>
The items provider receives an ItemsProviderRequest, which specifies the required number of items starting at a specific start index. The items provider then retrieves the requested items from a database or other service and returns them as an ItemsProviderResult<TItem> along with a count of the total items. The items provider can choose to retrieve the items with each request or cache them so that they're readily available.
A Virtualize<TItem> component can only accept one item source from its parameters, so don't attempt to simultaneously use an items provider and assign a collection to Items
. If both are assigned, an InvalidOperationException is thrown when the component's parameters are set at runtime.
The following example loads employees from an EmployeeService
(not shown):
private async ValueTask<ItemsProviderResult<Employee>> LoadEmployees(
ItemsProviderRequest request)
{
var numEmployees = Math.Min(request.Count, totalEmployees - request.StartIndex);
var employees = await EmployeesService.GetEmployeesAsync(request.StartIndex,
numEmployees, request.CancellationToken);
return new ItemsProviderResult<Employee>(employees, totalEmployees);
}
In the following example, a collection of DataRow is a non-generic collection, so an items provider delegate is used for virtualization:
<Virtualize Context="row" ItemsProvider="GetRows">
...
</Virtualize>
@code{
...
private ValueTask<ItemsProviderResult<DataRow>> GetRows(ItemsProviderRequest request)
{
return new(new ItemsProviderResult<DataRow>(
dataTable.Rows.OfType<DataRow>().Skip(request.StartIndex).Take(request.Count),
dataTable.Rows.Count));
}
}
Virtualize<TItem>.RefreshDataAsync instructs the component to rerequest data from its ItemsProvider. This is useful when external data changes. There's usually no need to call RefreshDataAsync when using Items.
RefreshDataAsync updates a Virtualize<TItem> component's data without causing a rerender. If RefreshDataAsync is invoked from a Blazor event handler or component lifecycle method, triggering a render isn't required because a render is automatically triggered at the end of the event handler or lifecycle method. If RefreshDataAsync is triggered separately from a background task or event, such as in the following ForecastUpdated
delegate, call StateHasChanged to update the UI at the end of the background task or event:
<Virtualize ... @ref="virtualizeComponent">
...
</Virtualize>
...
private Virtualize<FetchData>? virtualizeComponent;
protected override void OnInitialized()
{
WeatherForecastSource.ForecastUpdated += async () =>
{
await InvokeAsync(async () =>
{
await virtualizeComponent?.RefreshDataAsync();
StateHasChanged();
});
});
}
In the preceding example:
- RefreshDataAsync is called first to obtain new data for the Virtualize<TItem> component.
StateHasChanged
is called to rerender the component.
Placeholder
Because requesting items from a remote data source might take some time, you have the option to render a placeholder with item content:
- Use a Placeholder (
<Placeholder>...</Placeholder>
) to display content until the item data is available. - Use Virtualize<TItem>.ItemContent to set the item template for the list.
<Virtualize Context="employee" ItemsProvider="LoadEmployees">
<ItemContent>
<p>
@employee.FirstName @employee.LastName has the
job title of @employee.JobTitle.
</p>
</ItemContent>
<Placeholder>
<p>
Loading…
</p>
</Placeholder>
</Virtualize>
Empty content
Use the EmptyContent parameter to supply content when the component has loaded and either Items is empty or ItemsProviderResult<TItem>.TotalItemCount is zero.
EmptyContent.razor
:
@page "/empty-content"
<PageTitle>Empty Content</PageTitle>
<h1>Empty Content Example</h1>
<Virtualize Items="stringList">
<ItemContent>
<p>
@context
</p>
</ItemContent>
<EmptyContent>
<p>
There are no strings to display.
</p>
</EmptyContent>
</Virtualize>
@code {
private List<string>? stringList;
protected override void OnInitialized() => stringList ??= new();
}
Change the OnInitialized
method lambda to see the component display strings:
protected override void OnInitialized() =>
stringList ??= new() { "Here's a string!", "Here's another string!" };
Item size
The height of each item in pixels can be set with Virtualize<TItem>.ItemSize (default: 50). The following example changes the height of each item from the default of 50 pixels to 25 pixels:
<Virtualize Context="employee" Items="employees" ItemSize="25">
...
</Virtualize>
By default, the Virtualize<TItem> component measures the rendering size (height) of individual items after the initial render occurs. Use ItemSize to provide an exact item size in advance to assist with accurate initial render performance and to ensure the correct scroll position for page reloads. If the default ItemSize causes some items to render outside of the currently visible view, a second rerender is triggered. To correctly maintain the browser's scroll position in a virtualized list, the initial render must be correct. If not, users might view the wrong items.
Overscan count
Virtualize<TItem>.OverscanCount determines how many additional items are rendered before and after the visible region. This setting helps to reduce the frequency of rendering during scrolling. However, higher values result in more elements rendered in the page (default: 3). The following example changes the overscan count from the default of three items to four items:
<Virtualize Context="employee" Items="employees" OverscanCount="4">
...
</Virtualize>
State changes
When making changes to items rendered by the Virtualize<TItem> component, call StateHasChanged to enqueue re-evaluation and rerendering of the component. For more information, see ASP.NET Core Razor component rendering.
Keyboard scroll support
To allow users to scroll virtualized content using their keyboard, ensure that the virtualized elements or scroll container itself is focusable. If you fail to take this step, keyboard scrolling doesn't work in Chromium-based browsers.
For example, you can use a tabindex
attribute on the scroll container:
<div style="height:500px; overflow-y:scroll" tabindex="-1">
<Virtualize Items="allFlights">
<div class="flight-info">...</div>
</Virtualize>
</div>
To learn more about the meaning of tabindex
value -1
, 0
, or other values, see tabindex
(MDN documentation).
Advanced styles and scroll detection
The Virtualize<TItem> component is only designed to support specific element layout mechanisms. To understand which element layouts work correctly, the following explains how Virtualize
detects which elements should be visible for display in the correct place.
If your source code looks like the following:
<div style="height:500px; overflow-y:scroll" tabindex="-1">
<Virtualize Items="allFlights" ItemSize="100">
<div class="flight-info">Flight @context.Id</div>
</Virtualize>
</div>
At runtime, the Virtualize<TItem> component renders a DOM structure similar to the following:
<div style="height:500px; overflow-y:scroll" tabindex="-1">
<div style="height:1100px"></div>
<div class="flight-info">Flight 12</div>
<div class="flight-info">Flight 13</div>
<div class="flight-info">Flight 14</div>
<div class="flight-info">Flight 15</div>
<div class="flight-info">Flight 16</div>
<div style="height:3400px"></div>
</div>
The actual number of rows rendered and the size of the spacers vary according to your styling and Items
collection size. However, notice that there are spacer div
elements injected before and after your content. These serve two purposes:
- To provide an offset before and after your content, causing currently-visible items to appear at the correct location in the scroll range and the scroll range itself to represent the total size of all content.
- To detect when the user is scrolling beyond the current visible range, meaning that different content must be rendered.
Note
To learn how to control the spacer HTML element tag, see the Control the spacer element tag name section later in this article.
The spacer elements internally use an Intersection Observer to receive notification when they're becoming visible. Virtualize
depends on receiving these events.
Virtualize
works under the following conditions:
All rendered content items, including placeholder content, are of identical height. This makes it possible to calculate which content corresponds to a given scroll position without first fetching every data item and rendering the data into a DOM element.
Both the spacers and the content rows are rendered in a single vertical stack with every item filling the whole horizontal width. This is generally the default. In typical cases with
div
elements,Virtualize
works by default. If you're using CSS to create a more advanced layout, bear in mind the following requirements:- Scroll container styling requires a
display
with any of the following values:block
(the default for adiv
).table-row-group
(the default for atbody
).flex
withflex-direction
set tocolumn
. Ensure that immediate children of the Virtualize<TItem> component don't shrink under flex rules. For example, add.mycontainer > div { flex-shrink: 0 }
.
- Content row styling requires a
display
with either of the following values:block
(the default for adiv
).table-row
(the default for atr
).
- Don't use CSS to interfere with the layout for the spacer elements. By default, the spacer elements have a
display
value ofblock
, except if the parent is a table row group, in which case they default totable-row
. Don't try to influence spacer element width or height, including by causing them to have a border orcontent
pseudo-elements.
- Scroll container styling requires a
Any approach that stops the spacers and content elements from rendering as a single vertical stack, or causes the content items to vary in height, prevents correct functioning of the Virtualize<TItem> component.
Root-level virtualization
The Virtualize<TItem> component supports using the document itself as the scroll root, as an alternative to having some other element with overflow-y: scroll
. In the following example, the <html>
or <body>
elements are styled in a component with overflow-y: scroll
:
<HeadContent>
<style>
html, body { overflow-y: scroll }
</style>
</HeadContent>
The Virtualize<TItem> component supports using the document itself as the scroll root, as an alternative to having some other element with overflow-y: scroll
. When using the document as the scroll root, avoid styling the <html>
or <body>
elements with overflow-y: scroll
because it causes the intersection observer to treat the full scrollable height of the page as the visible region, instead of just the window viewport.
You can reproduce this problem by creating a large virtualized list (for example, 100,000 items) and attempt to use the document as the scroll root with html { overflow-y: scroll }
in the page CSS styles. Although it may work correctly at times, the browser attempts to render all 100,000 items at least once at the start of rendering, which may cause a browser tab lockup.
To work around this problem prior to the release of .NET 7, either avoid styling <html>
/<body>
elements with overflow-y: scroll
or adopt an alternative approach. In the following example, the height of the <html>
element is set to just over 100% of the viewport height:
<HeadContent>
<style>
html { min-height: calc(100vh + 0.3px) }
</style>
</HeadContent>
The Virtualize<TItem> component supports using the document itself as the scroll root, as an alternative to having some other element with overflow-y: scroll
. When using the document as the scroll root, avoid styling the <html>
or <body>
elements with overflow-y: scroll
because it cause the full scrollable height of the page to be treated as the visible region, instead of just the window viewport.
You can reproduce this problem by creating a large virtualized list (for example, 100,000 items) and attempt to use the document as the scroll root with html { overflow-y: scroll }
in the page CSS styles. Although it may work correctly at times, the browser attempts to render all 100,000 items at least once at the start of rendering, which may cause a browser tab lockup.
To work around this problem prior to the release of .NET 7, either avoid styling <html>
/<body>
elements with overflow-y: scroll
or adopt an alternative approach. In the following example, the height of the <html>
element is set to just over 100% of the viewport height:
<style>
html { min-height: calc(100vh + 0.3px) }
</style>
Control the spacer element tag name
If the Virtualize<TItem> component is placed inside an element that requires a specific child tag name, SpacerElement allows you to obtain or set the virtualization spacer tag name. The default value is div
. For the following example, the Virtualize<TItem> component renders inside a table body element (tbody
), so the appropriate child element for a table row (tr
) is set as the spacer.
VirtualizedTable.razor
:
@page "/virtualized-table"
<PageTitle>Virtualized Table</PageTitle>
<HeadContent>
<style>
html, body {
overflow-y: scroll
}
</style>
</HeadContent>
<h1>Virtualized Table Example</h1>
<table id="virtualized-table">
<thead style="position: sticky; top: 0; background-color: silver">
<tr>
<th>Item</th>
<th>Another column</th>
</tr>
</thead>
<tbody>
<Virtualize Items="fixedItems" ItemSize="30" SpacerElement="tr">
<tr @key="context" style="height: 30px;" id="row-@context">
<td>Item @context</td>
<td>Another value</td>
</tr>
</Virtualize>
</tbody>
</table>
@code {
private List<int> fixedItems = Enumerable.Range(0, 1000).ToList();
}
In the preceding example, the document root is used as the scroll container, so the html
and body
elements are styled with overflow-y: scroll
. For more information, see the following resources: