Rediger

Del via


Azure Stack HCI network deployment patterns

Applies to: Azure Stack HCI, versions 23H2 and 22H2

This article describes a set of network patterns references to architect, deploy, and configure Azure Stack HCI using either one, two or three physical hosts. Depending on your needs or scenarios, you can go directly to your pattern of interest. Each pattern is described as a standalone entity and includes all the network components for specific scenarios.

Choose a network reference pattern

Use the following table to directly go to a pattern and its content.

Single-server deployment pattern

Go to single server deployment

Diagram showing single-server deployment pattern.

Two-node deployment patterns

Go to storage switchless, single TOR switch Go to storage switchless, two TOR switches
Diagram showing two-node storage switchless with single TOR switch. Diagram showing two-node storage switchless with two TOR switches.
Go to storage switched, non-converged, two TOR switches Go to storage switched, fully converged, two TOR switches.
Diagram showing two-node storage switched, non-converged, two TOR switches Diagram showing two-node storage switched, fully converged, two TOR switches.

Go to Three-node switchless single link deployment

Diagram showing three-node switchless, two TOR, single link physical connectivity layout.

Go to Three-node switchless dual link deployment

Diagram showing three-node switchless, two TOR, two link physical connectivity layout.

Next steps