Rediger

Del via

Options for registering a SAML application in Azure AD B2C

  • Artikkel

This article describes the configuration options that are available when you're connecting Azure Active Directory B2C (Azure AD B2C) with your Security Assertion Markup Language (SAML) application.

Before you begin, use the Choose a policy type selector at the top of this page to choose the type of policy you’re setting up. Azure Active Directory B2C offers two methods to define how users interact with your applications: through predefined user flows or through fully configurable custom policies. The steps required in this article are different for each method.

This feature is available only for custom policies. For setup steps, select Custom policy in the preceding selector.

Specify a SAML response signature

You can specify a certificate to be used to sign the SAML messages. The message is the <samlp:Response> element within the SAML response sent to the application.

If you don't already have a policy key, create one. Then configure the SamlMessageSigning metadata item in the SAML Token Issuer technical profile. StorageReferenceId must reference the policy key name.

<ClaimsProvider>
  <DisplayName>Token Issuer</DisplayName>
  <TechnicalProfiles>
    <!-- SAML Token Issuer technical profile -->
    <TechnicalProfile Id="Saml2AssertionIssuer">
      <DisplayName>Token Issuer</DisplayName>
      <Protocol Name="SAML2"/>
      <OutputTokenFormat>SAML2</OutputTokenFormat>
        ...
      <CryptographicKeys>
        <Key Id="SamlMessageSigning" StorageReferenceId="B2C_1A_SamlMessageCert"/>
        ...
      </CryptographicKeys>
    ...
    </TechnicalProfile>

Signature algorithm

You can configure the signature algorithm that's used to sign the SAML assertion. Possible values are Sha256, Sha384, Sha512, or Sha1. Make sure the technical profile and application use the same signature algorithm. Use only the algorithm that your certificate supports.

Configure the signature algorithm by using the XmlSignatureAlgorithm metadata key within the relying party Metadata element.

<RelyingParty>
  <DefaultUserJourney ReferenceId="SignUpOrSignIn" />
  <TechnicalProfile Id="PolicyProfile">
    <DisplayName>PolicyProfile</DisplayName>
    <Protocol Name="SAML2"/>
    <Metadata>
      <Item Key="XmlSignatureAlgorithm">Sha256</Item>
    </Metadata>
   ..
  </TechnicalProfile>
</RelyingParty>

Check the SAML assertion signature

When your application expects the SAML assertion section to be signed, make sure the SAML service provider set the WantAssertionsSigned to true. If it's set to false or doesn't exist, the assertion section won't be signed.

The following example shows metadata for a SAML service provider, with WantAssertionsSigned set to true.

<EntityDescriptor ID="id123456789" entityID="https://samltestapp2.azurewebsites.net" validUntil="2099-12-31T23:59:59Z" xmlns="urn:oasis:names:tc:SAML:2.0:metadata">
  <SPSSODescriptor WantAssertionsSigned="true" AuthnRequestsSigned="false" protocolSupportEnumeration="urn:oasis:names:tc:SAML:2.0:protocol">
  ...
  </SPSSODescriptor>
</EntityDescriptor>

Signature certificate

Your policy must specify a certificate to be used to sign the SAML assertions section of the SAML response. If you don't already have a policy key, create one. Then configure the SamlAssertionSigning metadata item in the SAML Token Issuer technical profile. StorageReferenceId must reference the policy key name.

<ClaimsProvider>
  <DisplayName>Token Issuer</DisplayName>
  <TechnicalProfiles>
    <!-- SAML Token Issuer technical profile -->
    <TechnicalProfile Id="Saml2AssertionIssuer">
      <DisplayName>Token Issuer</DisplayName>
      <Protocol Name="SAML2"/>
      <OutputTokenFormat>SAML2</OutputTokenFormat>
        ...
      <CryptographicKeys>
        <Key Id="SamlAssertionSigning" StorageReferenceId="B2C_1A_SamlMessageCert"/>
        ...
      </CryptographicKeys>
    ...
    </TechnicalProfile>

Enable encryption in SAML assertions

When your application expects SAML assertions to be in an encrypted format, make sure that encryption is enabled in the Azure AD B2C policy.

Azure AD B2C uses the service provider's public key certificate to encrypt the SAML assertion. The public key must exist in the SAML application's metadata endpoint with the KeyDescriptor use value set to Encryption, as shown in the following example:

<KeyDescriptor use="encryption">
  <KeyInfo xmlns="https://www.w3.org/2000/09/xmldsig#">
    <X509Data>
      <X509Certificate>valid certificate</X509Certificate>
    </X509Data>
  </KeyInfo>
</KeyDescriptor>

To enable Azure AD B2C to send encrypted assertions, set the WantsEncryptedAssertion metadata item to true in the relying party technical profile. You can also configure the algorithm that's used to encrypt the SAML assertion.

<RelyingParty>
  <DefaultUserJourney ReferenceId="SignUpOrSignIn" />
  <TechnicalProfile Id="PolicyProfile">
    <DisplayName>PolicyProfile</DisplayName>
    <Protocol Name="SAML2"/>
    <Metadata>
      <Item Key="WantsEncryptedAssertions">true</Item>
    </Metadata>
   ..
  </TechnicalProfile>
</RelyingParty>

Encryption method

To configure the encryption method that's used to encrypt the SAML assertion data, set the DataEncryptionMethod metadata key within the relying party. Possible values are Aes256 (default), Aes192, Sha512, or Aes128. The metadata controls the value of the <EncryptedData> element in the SAML response.

To configure the encryption method for encrypting the copy of the key that was used to encrypt the SAML assertion data, set the KeyEncryptionMethod metadata key within the relying party. Possible values are:

  • Rsa15 (default): RSA Public Key Cryptography Standard (PKCS) Version 1.5 algorithm.
  • RsaOaep: RSA Optimal Asymmetric Encryption Padding (OAEP) encryption algorithm.

The metadata controls the value of the <EncryptedKey> element in the SAML response.

The following example shows the EncryptedAssertion section of a SAML assertion. The encrypted data method is Aes128, and the encrypted key method is Rsa15.

<saml:EncryptedAssertion>
  <xenc:EncryptedData xmlns:xenc="http://www.w3.org/2001/04/xmlenc#"
    xmlns:dsig="http://www.w3.org/2000/09/xmldsig#" Type="http://www.w3.org/2001/04/xmlenc#Element">
    <xenc:EncryptionMethod Algorithm="http://www.w3.org/2001/04/xmlenc#aes128-cbc" />
    <dsig:KeyInfo>
      <xenc:EncryptedKey>
        <xenc:EncryptionMethod Algorithm="http://www.w3.org/2001/04/xmlenc#rsa-1_5" />
        <xenc:CipherData>
          <xenc:CipherValue>...</xenc:CipherValue>
        </xenc:CipherData>
      </xenc:EncryptedKey>
    </dsig:KeyInfo>
    <xenc:CipherData>
      <xenc:CipherValue>...</xenc:CipherValue>
    </xenc:CipherData>
  </xenc:EncryptedData>
</saml:EncryptedAssertion>

You can change the format of the encrypted assertions. To configure the encryption format, set the UseDetachedKeys metadata key within the relying party. Possible values: true or false (default). When the value is set to true, the detached keys add the encrypted assertion as a child of EncryptedAssertion instead of EncryptedData.

Configure the encryption method and format by using the metadata keys within the relying party technical profile:

<RelyingParty>
  <DefaultUserJourney ReferenceId="SignUpOrSignIn" />
  <TechnicalProfile Id="PolicyProfile">
    <DisplayName>PolicyProfile</DisplayName>
    <Protocol Name="SAML2"/>
    <Metadata>
      <Item Key="DataEncryptionMethod">Aes128</Item>
      <Item Key="KeyEncryptionMethod">Rsa15</Item>
      <Item Key="UseDetachedKeys">false</Item>
    </Metadata>
   ..
  </TechnicalProfile>
</RelyingParty>

Configure IdP-initiated flow

When your application expects to receive a SAML assertion without first sending a SAML AuthN request to the identity provider (IdP), you must configure Azure AD B2C for IdP-initiated flow.

In IdP-initiated flow, the identity provider (Azure AD B2C) starts the sign-in process. The identity provider sends an unsolicited SAML response to the service provider (your relying party application).

We don't currently support scenarios where the initiating identity provider is an external identity provider federated with Azure AD B2C, such as Active Directory Federation Services or Salesforce. IdP-initiated flow is supported only for local account authentication in Azure AD B2C.

To enable IdP-initiated flow, set the IdpInitiatedProfileEnabled metadata item to true in the relying party technical profile.

<RelyingParty>
  <DefaultUserJourney ReferenceId="SignUpOrSignIn" />
  <TechnicalProfile Id="PolicyProfile">
    <DisplayName>PolicyProfile</DisplayName>
    <Protocol Name="SAML2"/>
    <Metadata>
      <Item Key="IdpInitiatedProfileEnabled">true</Item>
    </Metadata>
   ..
  </TechnicalProfile>
</RelyingParty>

To sign in or sign up a user through IdP-initiated flow, use the following URL:

https://<tenant-name>.b2clogin.com/<tenant-name>.onmicrosoft.com/<policy-name>/generic/login?EntityId=<app-identifier-uri>&RelayState=<relay-state>

Replace the following values:

  • Replace <tenant-name> with your tenant name.
  • Replace <policy-name> with the name of your SAML relying party policy.
  • Replace <app-identifier-uri> with the identifierUris value in the metadata file, such as https://contoso.onmicrosoft.com/app-name.
  • [Optional] replace <relay-state> with a value included in the authorization request that also is returned in the token response. The relay-state parameter is used to encode information about the user's state in the app before the authentication request occurred, such as the page they were on.

Sample policy

You can use a complete sample policy for testing with the SAML test app:

  1. Download the SAML-SP-initiated login sample policy.
  2. Update TenantId to match your tenant name. This article uses the example contoso.b2clogin.com.
  3. Keep the policy name B2C_1A_signup_signin_saml.

Configure the SAML response lifetime

You can configure the length of time that the SAML response remains valid. Set the lifetime by using the TokenLifeTimeInSeconds metadata item within the SAML Token Issuer technical profile. This value is the number of seconds that can elapse from the NotBefore time stamp, calculated at the token issuance time. The default lifetime is 300 seconds (five minutes).

<ClaimsProvider>
  <DisplayName>Token Issuer</DisplayName>
  <TechnicalProfiles>
    <TechnicalProfile Id="Saml2AssertionIssuer">
      <DisplayName>Token Issuer</DisplayName>
      <Protocol Name="SAML2"/>
      <OutputTokenFormat>SAML2</OutputTokenFormat>
      <Metadata>
        <Item Key="TokenLifeTimeInSeconds">400</Item>
      </Metadata>
      ...
    </TechnicalProfile>

Configure the time skew of a SAML response

You can configure the time skew applied to the SAML response NotBefore time stamp. This configuration ensures that if the times between two platforms aren't in sync, the SAML assertion will still be deemed valid when it's within this time skew.

Set the time skew by using the TokenNotBeforeSkewInSeconds metadata item within the SAML Token Issuer technical profile. The skew value is given in seconds, with a default value of 0. The maximum value is 3600 (one hour).

For example, when TokenNotBeforeSkewInSeconds is set to 120 seconds:

  • The token is issued at 13:05:10 UTC.
  • The token is valid from 13:03:10 UTC.
<ClaimsProvider>
  <DisplayName>Token Issuer</DisplayName>
  <TechnicalProfiles>
    <TechnicalProfile Id="Saml2AssertionIssuer">
      <DisplayName>Token Issuer</DisplayName>
      <Protocol Name="SAML2"/>
      <OutputTokenFormat>SAML2</OutputTokenFormat>
      <Metadata>
        <Item Key="TokenNotBeforeSkewInSeconds">120</Item>
      </Metadata>
      ...
    </TechnicalProfile>

Remove milliseconds from the date and time

You can specify whether milliseconds will be removed from date and time values within the SAML response. (These values include IssueInstant, NotBefore, NotOnOrAfter, and AuthnInstant.) To remove the milliseconds, set the RemoveMillisecondsFromDateTime metadata key within the relying party. Possible values: false (default) or true.

  <RelyingParty>
    <DefaultUserJourney ReferenceId="SignUpOrSignIn" />
    <TechnicalProfile Id="PolicyProfile">
      <DisplayName>PolicyProfile</DisplayName>
      <Protocol Name="SAML2" />
      <Metadata>
        <Item Key="RemoveMillisecondsFromDateTime">true</Item>
      </Metadata>
      <OutputClaims>
             ...
      </OutputClaims>
      <SubjectNamingInfo ClaimType="objectId" ExcludeAsClaim="true" />
    </TechnicalProfile>
  </RelyingParty>

Use an issuer ID to override an issuer URI

If you have multiple SAML applications that depend on different entityID values, you can override the IssuerUri value in your relying party file. To override the issuer URI, copy the technical profile with the Saml2AssertionIssuer ID from the base file and override the IssuerUri value.

Tip

Copy the <ClaimsProviders> section from the base and preserve these elements within the claims provider: <DisplayName>Token Issuer</DisplayName>, <TechnicalProfile Id="Saml2AssertionIssuer">, and <DisplayName>Token Issuer</DisplayName>.

Example:

   <ClaimsProviders>   
    <ClaimsProvider>
      <DisplayName>Token Issuer</DisplayName>
      <TechnicalProfiles>
        <TechnicalProfile Id="Saml2AssertionIssuer">
          <DisplayName>Token Issuer</DisplayName>
          <Metadata>
            <Item Key="IssuerUri">customURI</Item>
          </Metadata>
        </TechnicalProfile>
      </TechnicalProfiles>
    </ClaimsProvider>
  </ClaimsProviders>
  <RelyingParty>
    <DefaultUserJourney ReferenceId="SignUpInSAML" />
    <TechnicalProfile Id="PolicyProfile">
      <DisplayName>PolicyProfile</DisplayName>
      <Protocol Name="SAML2" />
      <Metadata>
     …

Manage a session

You can manage the session between Azure AD B2C and the SAML relying party application by using the UseTechnicalProfileForSessionManagement element and the SamlSSOSessionProvider.

Force users to reauthenticate

To force users to reauthenticate, the application can include the ForceAuthn attribute in the SAML authentication request. The ForceAuthn attribute is a Boolean value. When it's set to true, the user's session will be invalidated at Azure AD B2C, and the user is forced to reauthenticate.

The following SAML authentication request demonstrates how to set the ForceAuthn attribute to true.

<samlp:AuthnRequest 
       Destination="https://contoso.b2clogin.com/contoso.onmicrosoft.com/B2C_1A_SAML2_signup_signin/samlp/sso/login"
       ForceAuthn="true" ...>
    ...
</samlp:AuthnRequest>

Sign the Azure AD B2C IdP SAML metadata

You can instruct Azure AD B2C to sign its metadata document for the SAML identity provider, if the application requires it. If you don't already have a policy key, create one. Then configure the MetadataSigning metadata item in the SAML Token Issuer technical profile. StorageReferenceId must reference the policy key name.

<ClaimsProvider>
  <DisplayName>Token Issuer</DisplayName>
  <TechnicalProfiles>
    <!-- SAML Token Issuer technical profile -->
    <TechnicalProfile Id="Saml2AssertionIssuer">
      <DisplayName>Token Issuer</DisplayName>
      <Protocol Name="SAML2"/>
      <OutputTokenFormat>SAML2</OutputTokenFormat>
        ...
      <CryptographicKeys>
        <Key Id="MetadataSigning" StorageReferenceId="B2C_1A_SamlMetadataCert"/>
        ...
      </CryptographicKeys>
    ...
    </TechnicalProfile>

Debug the SAML protocol

To help configure and debug the integration with your service provider, you can use a browser extension for the SAML protocol. Browser extensions include the SAML DevTools extension for Chrome, SAML-tracer for Firefox, and Developer tools for Edge or Internet Explorer.

By using these tools, you can check the integration between your application and Azure AD B2C. For example:

  • Check whether the SAML request contains a signature and determine what algorithm is used to sign in the authorization request.
  • Check if Azure AD B2C returns an error message.
  • Check if the assertion section is encrypted.

Next steps