Bewerken

Share via


OpCodes.Bgt_Un_S Field

Definition

Transfers control to a target instruction (short form) if the first value is greater than the second value, when comparing unsigned integer values or unordered float values.

public: static initonly System::Reflection::Emit::OpCode Bgt_Un_S;
public static readonly System.Reflection.Emit.OpCode Bgt_Un_S;
 staticval mutable Bgt_Un_S : System.Reflection.Emit.OpCode
Public Shared ReadOnly Bgt_Un_S As OpCode 

Field Value

Remarks

The following table lists the instruction's hexadecimal and Microsoft Intermediate Language (MSIL) assembly format, along with a brief reference summary:

Format Assembly Format Description
35 < int8 > bgt.un.s target Branch to the target instruction at the specified offset if the first value is greater than the second value (unsigned values), short form.

The stack transitional behavior, in sequential order, is:

  1. value1 is pushed onto the stack.

  2. value2 is pushed onto the stack.

  3. value2 and value1 are popped from the stack; if value1 is greater than value2, the branch operation is performed.

The bgt.un.s instruction transfers control to the specified target instruction if value1 is greater than value2, when compared using unsigned integer or unordered float values. The effect is identical to performing a cgt.un instruction followed by a brtrue branch to the specific target instruction. The target instruction is represented as a 1-byte signed offset from the beginning of the instruction following the current instruction.

If the target instruction has one or more prefix codes, control can only be transferred to the first of these prefixes. Control transfers into and out of try, catch, filter, and finally blocks cannot be performed by this instruction.

The following Emit method overload can use the bgt.un.s opcode:

Applies to