Bewerken

Share via

OLE DB Driver for SQL Server Support for High Availability, Disaster Recovery

  • Artikel

Applies to: SQL Server Azure SQL Database Azure SQL Managed Instance Azure Synapse Analytics Analytics Platform System (PDW)

Download OLE DB driver

This article discusses OLE DB Driver for SQL Server support for Always On availability groups. For more information about Always On availability groups, see Availability Group Listeners, Client Connectivity, and Application Failover (SQL Server), Creation and Configuration of Availability Groups (SQL Server), Failover Clustering and Always On Availability Groups (SQL Server), and Active Secondaries: Readable Secondary Replicas (Always On Availability Groups).

You can specify the availability group listener of a given availability group in the connection string. If an OLE DB Driver for SQL Server application is connected to a database in an availability group that fails over, the original connection is broken, and the application must open a new connection to continue work after the failover.

If you are not connecting to an availability group listener, and if multiple IP addresses are associated with a hostname, OLE DB Driver for SQL Server will iterate sequentially through all IP addresses associated with DNS entry. This can be time consuming if the first IP address returned by DNS server is not bound to any network interface card (NIC). When connecting to an availability group listener, OLE DB Driver for SQL Server attempts to establish connections to all IP addresses in parallel and if a connection attempt succeeds, the driver will discard any pending connection attempts.

Note

Increasing connection timeout and implementing connection retry logic will increase the probability that an application will connect to an availability group. Also, because a connection can fail because of an availability group failover, you should implement connection retry logic, retrying a failed connection until it reconnects.

Connecting With MultiSubnetFailover

Always specify MultiSubnetFailover=Yes when connecting to a SQL Server Always On Availability Group listener or SQL Server Failover Cluster Instance. MultiSubnetFailover enables faster failover for all Always On Availability Groups and Failover Cluster Instances in SQL Server, and will significantly reduce failover time for single and multi-subnet Always On topologies. During a multi-subnet failover, the client will attempt connections in parallel. During a subnet failover, OLE DB Driver for SQL Server will retry the TCP connection.

The MultiSubnetFailover connection property indicates that the application is being deployed in an availability group or Failover Cluster Instance, and that OLE DB Driver for SQL Server will try to connect to the database on the primary SQL Server instance by trying to connect to all the IP addresses. When MultiSubnetFailover=Yes is specified for a connection, the client retries TCP connection attempts faster than the operating system's default TCP retransmit intervals. This enables faster reconnection after failover of either an Always On Availability Group or a Failover Cluster Instance, and is applicable to both single- and multi-subnet Availability Groups and Failover Cluster Instances.

For more information about connection string keywords, see Using Connection String Keywords with OLE DB Driver for SQL Server.

Specifying MultiSubnetFailover=Yes when connecting to something other than an availability group listener or Failover Cluster Instance may result in a negative performance impact, and is not supported.

Use the following guidelines to connect to a server in an availability group or Failover Cluster Instance:

  • Use the MultiSubnetFailover connection property when connecting to a single subnet or multi-subnet; it will improve performance for both.

  • To connect to an availability group, specify the availability group listener of the availability group as the server in your connection string.

  • Connecting to a SQL Server instance configured with more than 64 IP addresses will cause a connection failure.

  • Behavior of an application that uses the MultiSubnetFailover connection property is not affected based on the type of authentication: SQL Server Authentication, Kerberos Authentication, or Windows Authentication.

  • You can increase the value of loginTimeout to accommodate for failover time and reduce application connection retry attempts.

  • Distributed transactions are not supported.

If read-only routing is not in effect, connecting to a secondary replica location in an availability group will fail in the following situations:

  1. If the secondary replica location is not configured to accept connections.

  2. If an application uses ApplicationIntent=ReadWrite (discussed below) and the secondary replica location is configured for read-only access.

A connection will fail if a primary replica is configured to reject read-only workloads and the connection string contains ApplicationIntent=ReadOnly.

Upgrading to Use Multi-Subnet Clusters from Database Mirroring

A connection error will occur if the MultiSubnetFailover and Failover_Partner connection keywords are present in the connection string. An error will also occur if MultiSubnetFailover is used and the SQL Server returns a failover partner response indicating it is part of a database mirroring pair.

If you upgrade an OLE DB Driver for SQL Server application that currently uses database mirroring to a multi-subnet scenario, you should remove the Failover_Partner connection property and replace it with MultiSubnetFailover set to Yes and replace the server name in the connection string with an availability group listener. If a connection string uses Failover_Partner and MultiSubnetFailover=Yes, the driver will generate an error. However, if a connection string uses Failover_Partner and MultiSubnetFailover=No (or ApplicationIntent=ReadWrite), the application will use database mirroring.

The driver will return an error if database mirroring is used on the primary database in the availability group, and if MultiSubnetFailover=Yes is used in the connection string that connects to a primary database instead of to an availability group listener.

Specify application intent

You can specify the keyword ApplicationIntent in your connection string. The assignable values are ReadWrite (the default) or ReadOnly.

When you set ApplicationIntent=ReadOnly, the client requests a read workload when connecting. The server enforces the intent at connection time, and during a USE database statement.

The ApplicationIntent keyword doesn't work with legacy read-only databases.

Targets of ReadOnly

When a connection chooses ReadOnly, the connection is assigned to any of the following special configurations that might exist for the database:

  • Always On. A database can allow or disallow read workloads on the targeted availability group database. This choice is controlled by using the ALLOW_CONNECTIONS clause of the PRIMARY_ROLE and SECONDARY_ROLE Transact-SQL statements.

  • Geo-replication

  • Read scale-out

If none of those special targets are available, the regular database is read from.

The ApplicationIntent keyword enables read-only routing.

Read-only routing

Read-only routing is a feature that can ensure the availability of a read-only replica of a database. To enable read-only routing, all of the following apply:

  • You must connect to an Always On availability group listener.

  • The ApplicationIntent connection string keyword must be set to ReadOnly.

  • The database administrator must configure the availability group to enable read-only routing.

Multiple connections that each use read-only routing might not all connect to the same read-only replica. Changes in database synchronization or changes in the server's routing configuration can result in client connections to different read-only replicas.

You can ensure that all read-only requests connect to the same read-only replica by not passing an availability group listener to the Server connection string keyword. Instead, specify the name of the read-only instance.

Read-only routing might take longer than connecting to the primary. This is because read-only routing first connects to the primary, and then looks for the best available readable secondary. Due to these multiple steps, you should increase your login timeout to at least 30 seconds.

OLE DB

The OLE DB Driver for SQL Server supports both the ApplicationIntent and the MultiSubnetFailover keywords.

The two OLE DB connection string keywords were added to support Always On availability groups in OLE DB Driver for SQL Server:

  • ApplicationIntent
  • MultiSubnetFailover

For more information about connection string keywords in OLE DB Driver for SQL Server, see Using Connection String Keywords with OLE DB Driver for SQL Server.

Application Intent

The equivalent connection properties are:

  • SSPROP_INIT_APPLICATIONINTENT

  • DBPROP_INIT_PROVIDERSTRING

An OLE DB Driver for SQL Server application can use one of the methods to specify application intent:

  • IDBInitialize::Initialize
    IDBInitialize::Initialize uses the previously configured set of properties to initialize the data source and create the data source object. Specify application intent as a provider property or as part of the extended properties string.

  • IDataInitialize::GetDataSource
    IDataInitialize::GetDataSource takes an input connection string that can contain the Application Intent keyword.

  • IDBProperties::SetProperties
    To set the ApplicationIntent property value, call IDBProperties::SetProperties passing in the SSPROP_INIT_APPLICATIONINTENT property with value "ReadWrite" or "ReadOnly" or DBPROP_INIT_PROVIDERSTRING property with value containing "ApplicationIntent=ReadOnly" or "ApplicationIntent=ReadWrite".

You can specify application intent in the Application Intent Properties field of the All tab in the Data Link Properties dialog box.

When implicit connections are established, the implicit connection will use the application intent setting of the parent connection. Similarly, multiple sessions created from the same data source will inherit the data source's application intent setting.

MultiSubnetFailover

The equivalent connection properties are:

  • SSPROP_INIT_MULTISUBNETFAILOVER

  • DBPROP_INIT_PROVIDERSTRING

An OLE DB Driver for SQL Server application can use one of the following methods to set the MultiSubnetFailover option:

  • IDBInitialize::Initialize
    IDBInitialize::Initialize uses the previously configured set of properties to initialize the data source and create the data source object. Specify application intent as a provider property or as part of the extended properties string.

  • IDataInitialize::GetDataSource
    IDataInitialize::GetDataSource takes an input connection string that can contain the MultiSubnetFailover keyword.

  • IDBProperties::SetProperties
    To set the MultiSubnetFailover property value, call IDBProperties::SetProperties passing in the SSPROP_INIT_MULTISUBNETFAILOVER property with value VARIANT_TRUE or VARIANT_FALSE or DBPROP_INIT_PROVIDERSTRING property with value containing "MultiSubnetFailover=Yes" or "MultiSubnetFailover=No".

Example

DBPROP rgPropMultisubnet;

rgPropMultisubnet.dwPropertyID = SSPROP_INIT_MULTISUBNETFAILOVER;
rgPropMultisubnet.dwOptions = DBPROPOPTIONS_REQUIRED;
rgPropMultisubnet.dwStatus = DBPROPSTATUS_OK;
rgPropMultisubnet.colid = DB_NULLID;
V_VT(&(rgPropMultisubnet.vValue)) = VT_BOOL;
V_BOOL(&(rgPropMultisubnet.vValue)) = VARIANT_TRUE;

DBPROPSET PropSet;

PropSet.rgProperties = &rgPropMultisubnet;
PropSet.cProperties = 1;
PropSet.guidPropertySet = DBPROPSET_SQLSERVERDBINIT;
IDBProperties* pIDBProperties = NULL;
hr = pIDBInitialize->QueryInterface(IID_IDBProperties, (void **)&pIDBProperties);
pIDBProperties->SetProperties(1, &PropSet);

See Also

OLE DB Driver for SQL Server Features
Using Connection String Keywords with OLE DB Driver for SQL Server