SocketPermission Classe

Definição

Namespace:

System.Net

Assembly:

System.Security.Permissions.dll

Pacote:

System.Security.Permissions v9.0.0-rc.2.24473.5

Origem:

SocketPermission.cs

Cuidado

Code Access Security is not supported or honored by the runtime.

Controla os direitos para estabelecer ou aceitar conexões em um endereço de transporte.

public ref class SocketPermission sealed : System::Security::CodeAccessPermission, System::Security::Permissions::IUnrestrictedPermission

[System.Obsolete("Code Access Security is not supported or honored by the runtime.", DiagnosticId="SYSLIB0003", UrlFormat="https://aka.ms/dotnet-warnings/{0}")]
public sealed class SocketPermission : System.Security.CodeAccessPermission, System.Security.Permissions.IUnrestrictedPermission

[<System.Obsolete("Code Access Security is not supported or honored by the runtime.", DiagnosticId="SYSLIB0003", UrlFormat="https://aka.ms/dotnet-warnings/{0}")>]
type SocketPermission = class
    inherit CodeAccessPermission
    interface IUnrestrictedPermission

Public NotInheritable Class SocketPermission
Inherits CodeAccessPermission
Implements IUnrestrictedPermission

Herança

Object

CodeAccessPermission

SocketPermission

Atributos

ObsoleteAttribute

Implementações

IUnrestrictedPermission

Exemplos

O exemplo a seguir demonstra como usar a SocketPermission classe para definir, alterar e impor várias restrições de acesso de soquete.

// Creates a SocketPermission restricting access to and from all URIs.
SocketPermission^ mySocketPermission1 = gcnew SocketPermission( PermissionState::None );

// The socket to which this permission will apply will allow connections from www.contoso.com.
mySocketPermission1->AddPermission( NetworkAccess::Accept, TransportType::Tcp,  "www.contoso.com", 11000 );

// Creates a SocketPermission which will allow the target Socket to connect with www.southridgevideo.com.
SocketPermission^ mySocketPermission2 = gcnew SocketPermission( NetworkAccess::Connect,TransportType::Tcp, "www.southridgevideo.com",11002 );

// Creates a SocketPermission from the union of two SocketPermissions.
SocketPermission^ mySocketPermissionUnion =
   (SocketPermission^)( mySocketPermission1->Union( mySocketPermission2 ) );

// Checks to see if the union was successfully created by using the IsSubsetOf method.
if ( mySocketPermission1->IsSubsetOf( mySocketPermissionUnion ) &&
   mySocketPermission2->IsSubsetOf( mySocketPermissionUnion ) )
{
   Console::WriteLine(  "This union contains permissions from both mySocketPermission1 and mySocketPermission2" );
   
   // Prints the allowable accept URIs to the console.
   Console::WriteLine(  "This union accepts connections on :" );

   IEnumerator^ myEnumerator = mySocketPermissionUnion->AcceptList;
   while ( myEnumerator->MoveNext() )
   {
      Console::WriteLine( safe_cast<EndpointPermission^>( myEnumerator->Current )->ToString() );
   }
   
   // Prints the allowable connect URIs to the console.
   Console::WriteLine(  "This union permits connections to :" );

   myEnumerator = mySocketPermissionUnion->ConnectList;
   while ( myEnumerator->MoveNext() )
   {
      Console::WriteLine( safe_cast<EndpointPermission^>( myEnumerator->Current )->ToString() );
   }
}

// Creates a SocketPermission from the intersect of two SocketPermissions.
SocketPermission^ mySocketPermissionIntersect =
   (SocketPermission^)( mySocketPermission1->Intersect( mySocketPermissionUnion ) );

// mySocketPermissionIntersect should now contain the permissions of mySocketPermission1.
if ( mySocketPermission1->IsSubsetOf( mySocketPermissionIntersect ) )
{
   Console::WriteLine(  "This is expected" );
}

// mySocketPermissionIntersect should not contain the permissios of mySocketPermission2.
if ( mySocketPermission2->IsSubsetOf( mySocketPermissionIntersect ) )
{
   Console::WriteLine(  "This should not print" );
}

// Creates a copy of the intersect SocketPermission.
SocketPermission^ mySocketPermissionIntersectCopy =
   (SocketPermission^)( mySocketPermissionIntersect->Copy() );
if ( mySocketPermissionIntersectCopy->Equals( mySocketPermissionIntersect ) )
{
   Console::WriteLine(  "Copy successfull" );
}

// Converts a SocketPermission to XML format and then immediately converts it back to a SocketPermission.
mySocketPermission1->FromXml( mySocketPermission1->ToXml() );

// Checks to see if permission for this socket resource is unrestricted.  If it is, then there is no need to
// demand that permissions be enforced.
if ( mySocketPermissionUnion->IsUnrestricted() )
{
   //Do nothing.  There are no restrictions.
}
else
{
   // Enforces the permissions found in mySocketPermissionUnion on any Socket Resources used below this statement. 
   mySocketPermissionUnion->Demand();
}

IPHostEntry^ myIpHostEntry = Dns::Resolve(  "www.contoso.com" );
IPEndPoint^ myLocalEndPoint = gcnew IPEndPoint( myIpHostEntry->AddressList[ 0 ], 11000 );

Socket^ s = gcnew Socket( myLocalEndPoint->Address->AddressFamily,
   SocketType::Stream,
   ProtocolType::Tcp );
try
{
   s->Connect( myLocalEndPoint );
}
catch ( Exception^ e ) 
{
   Console::Write(  "Exception Thrown: " );
   Console::WriteLine( e->ToString() );
}

// Perform all socket operations in here.
s->Close();

     // Creates a SocketPermission restricting access to and from all URIs.
     SocketPermission mySocketPermission1 = new SocketPermission(PermissionState.None);

     // The socket to which this permission will apply will allow connections from www.contoso.com.
     mySocketPermission1.AddPermission(NetworkAccess.Accept, TransportType.Tcp, "www.contoso.com", 11000);

     // Creates a SocketPermission which will allow the target Socket to connect with www.southridgevideo.com.
     SocketPermission mySocketPermission2 =
                                new SocketPermission(NetworkAccess.Connect, TransportType.Tcp, "www.southridgevideo.com", 11002);

     // Creates a SocketPermission from the union of two SocketPermissions.
     SocketPermission mySocketPermissionUnion =
                                (SocketPermission)mySocketPermission1.Union(mySocketPermission2);

     // Checks to see if the union was successfully created by using the IsSubsetOf method.
     if (mySocketPermission1.IsSubsetOf(mySocketPermissionUnion) &&
           mySocketPermission2.IsSubsetOf(mySocketPermissionUnion)){
          Console.WriteLine("This union contains permissions from both mySocketPermission1 and mySocketPermission2");

          // Prints the allowable accept URIs to the console.
          Console.WriteLine("This union accepts connections on :");

          IEnumerator myEnumerator = mySocketPermissionUnion.AcceptList;
       while (myEnumerator.MoveNext()) {
               Console.WriteLine(((EndpointPermission)myEnumerator.Current).ToString());
            }

             // Prints the allowable connect URIs to the console.
          Console.WriteLine("This union permits connections to :");

          myEnumerator = mySocketPermissionUnion.ConnectList;
       while (myEnumerator.MoveNext()) {
               Console.WriteLine(((EndpointPermission)myEnumerator.Current).ToString());
            }
           }


     // Creates a SocketPermission from the intersect of two SocketPermissions.
     SocketPermission mySocketPermissionIntersect =
                               (SocketPermission)mySocketPermission1.Intersect(mySocketPermissionUnion);

     // mySocketPermissionIntersect should now contain the permissions of mySocketPermission1.
     if (mySocketPermission1.IsSubsetOf(mySocketPermissionIntersect)){
          Console.WriteLine("This is expected");
     }
    // mySocketPermissionIntersect should not contain the permissios of mySocketPermission2.
     if (mySocketPermission2.IsSubsetOf(mySocketPermissionIntersect)){
          Console.WriteLine("This should not print");
     }


// Creates a copy of the intersect SocketPermission.
     SocketPermission mySocketPermissionIntersectCopy =
                               (SocketPermission)mySocketPermissionIntersect.Copy();

     if (mySocketPermissionIntersectCopy.Equals(mySocketPermissionIntersect)){
     Console.WriteLine("Copy successfull");
     }


     // Converts a SocketPermission to XML format and then immediately converts it back to a SocketPermission.
     mySocketPermission1.FromXml(mySocketPermission1.ToXml());

     // Checks to see if permission for this socket resource is unrestricted.  If it is, then there is no need to
     // demand that permissions be enforced.
     if (mySocketPermissionUnion.IsUnrestricted()){
        
          //Do nothing.  There are no restrictions.
     }
     else{
         // Enforces the permissions found in mySocketPermissionUnion on any Socket Resources used below this statement.
         mySocketPermissionUnion.Demand();
     }

    IPHostEntry myIpHostEntry = Dns.Resolve("www.contoso.com");
    IPEndPoint myLocalEndPoint = new IPEndPoint(myIpHostEntry.AddressList[0], 11000);

       Socket s = new Socket(myLocalEndPoint.Address.AddressFamily,
                                   SocketType.Stream,
                                         ProtocolType.Tcp);
       try{
            s.Connect(myLocalEndPoint);
       }
       catch (Exception e){
            Console.WriteLine("Exception Thrown: " + e.ToString());
       }

      // Perform all socket operations in here.

      s.Close();

   ' Creates a SocketPermission restricting access to and from all URIs.
   Dim mySocketPermission1 As New SocketPermission(PermissionState.None)
   
   ' The socket to which this permission will apply will allow connections from www.contoso.com.
   mySocketPermission1.AddPermission(NetworkAccess.Accept, TransportType.Tcp, "www.contoso.com", 11000)
   
   ' Creates a SocketPermission which will allow the target Socket to connect with www.southridgevideo.com.
   Dim mySocketPermission2 As New SocketPermission(NetworkAccess.Connect, TransportType.Tcp, "www.southridgevideo.com", 11002)
   
   ' Creates a SocketPermission from the union of two SocketPermissions.
   Dim mySocketPermissionUnion As SocketPermission = CType(mySocketPermission1.Union(mySocketPermission2), SocketPermission)
   
   ' Checks to see if the union was successfully created by using the IsSubsetOf method.
   If mySocketPermission1.IsSubsetOf(mySocketPermissionUnion) And mySocketPermission2.IsSubsetOf(mySocketPermissionUnion) Then
      Console.WriteLine("This union contains permissions from both mySocketPermission1 and mySocketPermission2")
      
      ' Prints the allowable accept URIs to the console.
      Console.WriteLine("This union accepts connections on :")
      
      Dim myEnumerator As IEnumerator = mySocketPermissionUnion.AcceptList
      While myEnumerator.MoveNext()
         Console.WriteLine(CType(myEnumerator.Current, EndpointPermission).ToString())
      End While
      
      Console.WriteLine("This union establishes connections on : ")
      
      ' Prints the allowable connect URIs to the console.
      Console.WriteLine("This union permits connections to :")
      
      myEnumerator = mySocketPermissionUnion.ConnectList
      While myEnumerator.MoveNext()
         Console.WriteLine(CType(myEnumerator.Current, EndpointPermission).ToString())
      End While
   End If 
   ' Creates a SocketPermission from the intersect of two SocketPermissions.
   Dim mySocketPermissionIntersect As SocketPermission = CType(mySocketPermission1.Intersect(mySocketPermissionUnion), SocketPermission)
   
   ' mySocketPermissionIntersect should now contain the permissions of mySocketPermission1.
   If mySocketPermission1.IsSubsetOf(mySocketPermissionIntersect) Then
      Console.WriteLine("This is expected")
   End If
   ' mySocketPermissionIntersect should not contain the permissios of mySocketPermission2.
   If mySocketPermission2.IsSubsetOf(mySocketPermissionIntersect) Then
      Console.WriteLine("This should not print")
   End If
   
   ' Creates a copy of the intersect SocketPermission.
   Dim mySocketPermissionIntersectCopy As SocketPermission = CType(mySocketPermissionIntersect.Copy(), SocketPermission)
   
   If mySocketPermissionIntersectCopy.Equals(mySocketPermissionIntersect) Then
      Console.WriteLine("Copy successfull")
   End If
   ' Converts a SocketPermission to XML format and then immediately converts it back to a SocketPermission.
   mySocketPermission1.FromXml(mySocketPermission1.ToXml())
   
   
   ' Checks to see if permission for this socket resource is unrestricted.  If it is, then there is no need to
   ' demand that permissions be enforced.
   If mySocketPermissionUnion.IsUnrestricted() Then
   
   'Do nothing.  There are no restrictions.
   Else
      ' Enforces the permissions found in mySocketPermissionUnion on any Socket Resources used below this statement. 
      mySocketPermissionUnion.Demand()
   End If
   
   Dim myIpHostEntry As IPHostEntry = Dns.Resolve("www.contoso.com")
   Dim myLocalEndPoint As New IPEndPoint(myIpHostEntry.AddressList(0), 11000)
   
   Dim s As New Socket(myLocalEndPoint.Address.AddressFamily, SocketType.Stream, ProtocolType.Tcp)
   Try
      s.Connect(myLocalEndPoint)
   Catch e As Exception
      Console.WriteLine(("Exception Thrown: " + e.ToString()))
   End Try
   
   ' Perform all socket operations in here.
   s.Close()
End Sub

Comentários

Cuidado

O CAS (Segurança de Acesso do Código) foi preterido em todas as versões do .NET Framework e do .NET. As versões recentes do .NET não aceitam anotações de CAS e produzem erros caso as APIs relacionadas ao CAS sejam usadas. Os desenvolvedores devem buscar meios alternativos de realizar tarefas de segurança.

SocketPermission as instâncias controlam a permissão para aceitar conexões ou iniciar Socket conexões. Uma Socket permissão pode ser estabelecida para um nome de host ou endereço IP, um número de porta e um protocolo de transporte.

Observação

Evite criar permissões de soquete usando nomes de host, pois esses nomes precisam ser resolvidos para endereços IP e isso pode bloquear a pilha.

Construtores

SocketPermission(NetworkAccess, TransportType, String, Int32)	Obsoleto. Inicializa uma nova instância da classe SocketPermission para o endereço de transporte determinado com a permissão especificada.
SocketPermission(PermissionState)	Obsoleto. Inicializa uma nova instância da classe SocketPermission que dá acesso irrestrito ao Socket ou impede o acesso ao Socket.

Campos

AllPorts

Obsoleto. Define uma constante que representa todas as portas.

Propriedades

AcceptList	Obsoleto. Obtém uma lista de instâncias EndpointPermission que identifica os pontos de extremidade que podem ser aceitos no âmbito dessa instância de permissão.
ConnectList	Obsoleto. Obtém uma lista de instâncias EndpointPermission que identifica os pontos de extremidade que podem ser conectados no âmbito dessa instância de permissão.

Métodos

AddPermission(NetworkAccess, TransportType, String, Int32)	Obsoleto. Adiciona uma permissão ao conjunto de permissões de um endereço de transporte.
Assert()	Obsoleto. Declara que o código de chamada pode acessar o recurso protegido por uma demanda de permissão através do código que chama este método, mesmo que os chamadores na pilha não tenham recebido permissão para acessar o recurso. Usar Assert() pode criar problemas de segurança. (Herdado de CodeAccessPermission)
Copy()	Obsoleto. Cria uma cópia de uma instância SocketPermission.
Demand()	Obsoleto. Força um SecurityException no tempo de execução se todos os chamadores no topo da pilha de chamadas não receberam as permissões especificadas pela instância atual. (Herdado de CodeAccessPermission)
Deny()	Obsoleto. Impede que os chamadores no nível superior da pilha de chamadas usem o código que chama esse método para acessar o recurso especificado pela instância atual. (Herdado de CodeAccessPermission)
Equals(Object)	Obsoleto. Determina se o objeto CodeAccessPermission especificado é igual ao CodeAccessPermission atual. (Herdado de CodeAccessPermission)
FromXml(SecurityElement)	Obsoleto. Reconstrói uma instância SocketPermission para uma codificação de XML.
GetHashCode()	Obsoleto. Obtém um código hash para o objeto CodeAccessPermission atual, adequado para algoritmos de hash e estruturas de dados, tais como uma tabela de hash. (Herdado de CodeAccessPermission)
GetType()	Obsoleto. Obtém o Type da instância atual. (Herdado de Object)
Intersect(IPermission)	Obsoleto. Retorna a interseção lógica entre duas instâncias SocketPermission.
IsSubsetOf(IPermission)	Obsoleto. Determina se a permissão atual é um subconjunto da permissão especificada.
IsUnrestricted()	Obsoleto. Verifica o estado de permissão geral do objeto.
MemberwiseClone()	Obsoleto. Cria uma cópia superficial do Object atual. (Herdado de Object)
PermitOnly()	Obsoleto. Impede que os chamadores no topo da pilha de chamadas usem o código que chama esse método para acessar todos os recursos, com exceção do recurso especificado pela instância atual. (Herdado de CodeAccessPermission)
ToString()	Obsoleto. Cria e retorna uma representação de cadeia de caracteres do objeto de permissão atual. (Herdado de CodeAccessPermission)
ToXml()	Obsoleto. Cria uma codificação de XML de uma instância SocketPermission e de seu estado atual.
Union(IPermission)	Obsoleto. Retorna a união lógica entre duas instâncias SocketPermission.