Exemplo de comentários de documentação XML

Este artigo contém três exemplos para adicionar comentários de documentação XML à maioria dos elementos da linguagem C#. O primeiro exemplo mostra como você documenta uma classe com membros diferentes. O segundo exemplo mostra como você pode reutilizar explicações para uma hierarquia de classes ou interfaces. O terceiro exemplo mostra marcas a serem usadas para classes e membros genéricos. O segundo e o terceiro exemplos usam conceitos que o primeiro exemplo aborda.

A linguagem C# faz referência a documentos da versão mais recentemente lançada da linguagem C#. Ele também contém a documentação inicial para funcionalidades em pré-visualizações públicas para o próximo lançamento do idioma.

A documentação identifica qualquer recurso introduzido pela primeira vez nas três últimas versões do idioma ou nas versões prévias públicas atuais.

Dica

Para descobrir quando um recurso foi introduzido pela primeira vez em C#, consulte o artigo sobre o histórico de versão da linguagem C#.

Documentar uma classe, struct ou interface

O exemplo a seguir mostra elementos de linguagem comum e as marcas que você provavelmente usará para descrever esses elementos. Os comentários de documentação descrevem o uso das marcas, em vez da classe propriamente dita.

/// <summary>
/// Every class and member should have a one sentence
/// summary describing its purpose.
/// </summary>
/// <remarks>
/// You can expand on that one sentence summary to
/// provide more information for readers. In this case,
/// the <c>ExampleClass</c> provides different C#
/// elements to show how you would add documentation
///comments for most elements in a typical class.
/// <para>
/// The remarks can add multiple paragraphs, so you can
/// write detailed information for developers that use
/// your work. You should add everything needed for
/// readers to be successful. This class contains
/// examples for the following:
/// </para>
/// <list type="table">
/// <item>
/// <term>Summary</term>
/// <description>
/// This should provide a one sentence summary of the class or member.
/// </description>
/// </item>
/// <item>
/// <term>Remarks</term>
/// <description>
/// This is typically a more detailed description of the class or member
/// </description>
/// </item>
/// <item>
/// <term>para</term>
/// <description>
/// The para tag separates a section into multiple paragraphs
/// </description>
/// </item>
/// <item>
/// <term>list</term>
/// <description>
/// Provides a list of terms or elements
/// </description>
/// </item>
/// <item>
/// <term>returns, param</term>
/// <description>
/// Used to describe parameters and return values
/// </description>
/// </item>
/// <item>
/// <term>value</term>
/// <description>Used to describe properties</description>
/// </item>
/// <item>
/// <term>exception</term>
/// <description>
/// Used to describe exceptions that may be thrown
/// </description>
/// </item>
/// <item>
/// <term>c, cref, see, seealso</term>
/// <description>
/// These provide code style and links to other
/// documentation elements
/// </description>
/// </item>
/// <item>
/// <term>example, code</term>
/// <description>
/// These are used for code examples
/// </description>
/// </item>
/// </list>
/// <para>
/// The list above uses the "table" style. You could
/// also use the "bullet" or "number" style. Neither
/// would typically use the "term" element.
/// <br/>
/// Note: paragraphs are double spaced. Use the *br*
/// tag for single spaced lines.
/// </para>
/// </remarks>
public class ExampleClass
{
    /// <value>
    /// The <c>Label</c> property represents a label
    /// for this instance.
    /// </value>
    /// <remarks>
    /// The <see cref="Label"/> is a <see langword="string"/>
    /// that you use for a label.
    /// <para>
    /// Note that there isn't a way to provide a "cref" to
    /// each accessor, only to the property itself.
    /// </para>
    /// </remarks>
    public string? Label
    {
        get;
        set;
    }

    /// <summary>
    /// Adds two integers and returns the result.
    /// </summary>
    /// <returns>
    /// The sum of two integers.
    /// </returns>
    /// <param name="left">
    /// The left operand of the addition.
    /// </param>
    /// <param name="right">
    /// The right operand of the addition.
    /// </param>
    /// <example>
    /// <code>
    /// int c = Math.Add(4, 5);
    /// if (c > 10)
    /// {
    ///     Console.WriteLine(c);
    /// }
    /// </code>
    /// </example>
    /// <exception cref="System.OverflowException">
    /// Thrown when one parameter is
    /// <see cref="Int32.MaxValue">MaxValue</see> and the other is
    /// greater than 0.
    /// Note that here you can also use
    /// <see href="https://learn.microsoft.com/dotnet/api/system.int32.maxvalue"/>
    ///  to point a web page instead.
    /// </exception>
    /// <see cref="ExampleClass"/> for a list of all
    /// the tags in these examples.
    /// <seealso cref="ExampleClass.Label"/>
    public static int Add(int left, int right)
    {
        if ((left == int.MaxValue && right > 0) || (right == int.MaxValue && left > 0))
            throw new System.OverflowException();

        return left + right;
    }
}

/// <summary>
/// This is an example of a positional record.
/// </summary>
/// <remarks>
/// There isn't a way to add XML comments for properties
/// created for positional records, yet. The language
/// design team is still considering what tags should
/// be supported, and where. Currently, you can use
/// the "param" tag to describe the parameters to the
/// primary constructor.
/// </remarks>
/// <param name="FirstName">
/// This tag will apply to the primary constructor parameter.
/// </param>
/// <param name="LastName">
/// This tag will apply to the primary constructor parameter.
/// </param>
public record Person(string FirstName, string LastName);

Adicionar documentação pode poluir o código-fonte com grandes conjuntos de comentários destinados aos usuários da sua biblioteca. Use a <Include> marca para separar seus comentários XML de sua origem. O código-fonte faz referência a um arquivo XML usando a <Include> marca:

/// <include file='xml_include_tag.xml' path='MyDocs/MyMembers[@name="test"]/*' />
class Test
{
    static void Main()
    {
    }
}

/// <include file='xml_include_tag.xml' path='MyDocs/MyMembers[@name="test2"]/*' />
class Test2
{
    public void Test()
    {
    }
}

O segundo arquivo, xml_include_tag.xml, contém os comentários da documentação.

<MyDocs>
    <MyMembers name="test">
        <summary>
        The summary for this type.
        </summary>
    </MyMembers>
    <MyMembers name="test2">
        <summary>
        The summary for this other type.
        </summary>
    </MyMembers>
</MyDocs>

Documentar uma hierarquia de classes e interfaces

O <inheritdoc> elemento significa que um tipo ou membro herda comentários de documentação de uma classe base ou interface. Você também pode usar o <inheritdoc> elemento com o cref atributo para herdar comentários de um membro do mesmo tipo. O exemplo a seguir mostra maneiras de usar esse tag. Quando você adiciona o inheritdoc atributo a um tipo, os comentários de membro são herdados. Você pode impedir o uso de comentários herdados escrevendo comentários sobre os membros no tipo derivado. O compilador escolhe esses comentários em vez dos comentários herdados.

/// <summary>
/// A summary about this class.
/// </summary>
/// <remarks>
/// These remarks would explain more about this class.
/// In this example, these comments also explain the
/// general information about the derived class.
/// </remarks>
public class MainClass
{
}

///<inheritdoc/>
public class DerivedClass : MainClass
{
}

/// <summary>
/// This interface would describe all the methods in
/// its contract.
/// </summary>
/// <remarks>
/// While elided for brevity, each method or property
/// in this interface would contain docs that you want
/// to duplicate in each implementing class.
/// </remarks>
public interface ITestInterface
{
    /// <summary>
    /// This method is part of the test interface.
    /// </summary>
    /// <remarks>
    /// This content would be inherited by classes
    /// that implement this interface when the
    /// implementing class uses "inheritdoc"
    /// </remarks>
    /// <returns>The value of <paramref name="arg" /> </returns>
    /// <param name="arg">The argument to the method</param>
    int Method(int arg);
}

///<inheritdoc cref="ITestInterface"/>
public class ImplementingClass : ITestInterface
{
    // doc comments are inherited here.
    public int Method(int arg) => arg;
}

/// <summary>
/// This class shows hows you can "inherit" the doc
/// comments from one method in another method.
/// </summary>
/// <remarks>
/// You can inherit all comments, or only a specific tag,
/// represented by an xpath expression.
/// </remarks>
public class InheritOnlyReturns
{
    /// <summary>
    /// In this example, this summary is only visible for this method.
    /// </summary>
    /// <returns>A boolean</returns>
    public static bool MyParentMethod(bool x) { return x; }

    /// <inheritdoc cref="MyParentMethod" path="/returns"/>
    public static bool MyChildMethod() { return false; }
}

/// <Summary>
/// This class shows an example ofsharing comments across methods.
/// </Summary>
public class InheritAllButRemarks
{
    /// <summary>
    /// In this example, this summary is visible on all the methods.
    /// </summary>
    /// <remarks>
    /// The remarks can be inherited by other methods
    /// using the xpath expression.
    /// </remarks>
    /// <returns>A boolean</returns>
    public static bool MyParentMethod(bool x) { return x; }

    /// <inheritdoc cref="MyParentMethod" path="//*[not(self::remarks)]"/>
    public static bool MyChildMethod() { return false; }
}

Tipos genéricos

Use a <typeparam> marca para descrever parâmetros de tipo em tipos e métodos genéricos. O valor do cref atributo requer uma nova sintaxe para fazer referência a um método ou classe genérico:

/// <summary>
/// This is a generic class.
/// </summary>
/// <remarks>
/// This example shows how to specify the <see cref="GenericClass{T}"/>
/// type as a cref attribute.
/// In generic classes and methods, you'll often want to reference the
/// generic type, or the type parameter.
/// </remarks>
class GenericClass<T>
{
    // Fields and members.
}

/// <Summary>
/// This shows examples of typeparamref and typeparam tags
/// </Summary>
public class ParamsAndParamRefs
{
    /// <summary>
    /// The GetGenericValue method.
    /// </summary>
    /// <remarks>
    /// This sample shows how to specify the <see cref="GetGenericValue"/>
    /// method as a cref attribute.
    /// The parameter and return value are both of an arbitrary type,
    /// <typeparamref name="T"/>
    /// </remarks>
    public static T GetGenericValue<T>(T para)
    {
        return para;
    }
}

Membros de extensão

Adicione comentários XML para <summary>, <param>, e, se necessário, <typeparam> para descrever o parâmetro de receptor nos membros de extensão:

/// <summary>
/// This is an example of extension methods documentation.
/// </summary>
public static class Extensions
{
    /// <summary>
    /// Defines extensions for generic enumerable sequences.
    /// </summary>
    /// <param name="sequence">The receiver sequence</param>
    /// <typeparam name="TSequence">The type of the items in the sequence.</typeparam>
    extension<TSequence>(IEnumerable<TSequence> sequence)
    {
        /// <summary>
        /// Returns an enumerable collection containing the elements of the sequence in reverse order.
        /// </summary>
        /// <remarks>
        /// The returned sequence is evaluated lazily. Enumerating the result will consume all
        /// elements of the original sequence before yielding any items in reverse order.
        /// </remarks>
        /// <returns>
        /// An <see cref="IEnumerable{TSequence}"/> that enumerates the elements of the sequence from last to first.
        /// </returns>
        public IEnumerable<TSequence> ReverseSequence()
        {
            var stack = new Stack<TSequence>();
            foreach (var item in sequence)
            {
                stack.Push(item);
            }
            while (stack.Count > 0)
            {
                yield return stack.Pop();
            }
        }

        /// <summary>
        /// Generates a sequence of items using a generator function.
        /// </summary>
        /// <param name="count">The number of items.</param>
        /// <param name="generator">The generator function.</param>
        /// <returns>A new sequence of <paramref name="count"/> items.</returns>
        public static IEnumerable<TSequence> Generate(int count, Func<TSequence> generator)
        {
            for (int i = 0; i < count; i++)
            {
                yield return generator();
            }
        }
    }
}

O compilador C# copia os nós XML do extension bloco para todos os membros declarados nesse bloco.

Exemplo de classe matemática

O código a seguir mostra um exemplo realista de adição de comentários de documentos a uma biblioteca de matemática.

namespace TaggedLibrary
{
    /*
        The main Math class
        Contains all methods for performing basic math functions
    */
    /// <summary>
    /// The main <c>Math</c> class.
    /// Contains all methods for performing basic math functions.
    /// <list type="bullet">
    /// <item>
    /// <term>Add</term>
    /// <description>Addition Operation</description>
    /// </item>
    /// <item>
    /// <term>Subtract</term>
    /// <description>Subtraction Operation</description>
    /// </item>
    /// <item>
    /// <term>Multiply</term>
    /// <description>Multiplication Operation</description>
    /// </item>
    /// <item>
    /// <term>Divide</term>
    /// <description>Division Operation</description>
    /// </item>
    /// </list>
    /// </summary>
    /// <remarks>
    /// <para>
    /// This class can add, subtract, multiply and divide.
    /// </para>
    /// <para>
    /// These operations can be performed on both
    /// integers and doubles.
    /// </para>
    /// </remarks>
    public class Math
    {
        // Adds two integers and returns the result
        /// <summary>
        /// Adds two integers <paramref name="a"/> and <paramref name="b"/>
        ///  and returns the result.
        /// </summary>
        /// <returns>
        /// The sum of two integers.
        /// </returns>
        /// <example>
        /// <code>
        /// int c = Math.Add(4, 5);
        /// if (c > 10)
        /// {
        ///     Console.WriteLine(c);
        /// }
        /// </code>
        /// </example>
        /// <exception cref="System.OverflowException">
        /// Thrown when one parameter is <see cref="Int32.MaxValue"/> and the other
        /// is greater than 0.
        /// </exception>
        /// See <see cref="Math.Add(double, double)"/> to add doubles.
        /// <seealso cref="Math.Subtract(int, int)"/>
        /// <seealso cref="Math.Multiply(int, int)"/>
        /// <seealso cref="Math.Divide(int, int)"/>
        /// <param name="a">An integer.</param>
        /// <param name="b">An integer.</param>
        public static int Add(int a, int b)
        {
            // If any parameter is equal to the max value of an integer
            // and the other is greater than zero
            if ((a == int.MaxValue && b > 0) || 
                (b == int.MaxValue && a > 0))
            {
                throw new System.OverflowException();
            }
            return a + b;
        }

        // Adds two doubles and returns the result
        /// <summary>
        /// Adds two doubles <paramref name="a"/> and <paramref name="b"/>
        /// and returns the result.
        /// </summary>
        /// <returns>
        /// The sum of two doubles.
        /// </returns>
        /// <example>
        /// <code>
        /// double c = Math.Add(4.5, 5.4);
        /// if (c > 10)
        /// {
        ///     Console.WriteLine(c);
        /// }
        /// </code>
        /// </example>
        /// <exception cref="System.OverflowException">
        /// Thrown when one parameter is max and the other
        /// is greater than 0.</exception>
        /// See <see cref="Math.Add(int, int)"/> to add integers.
        /// <seealso cref="Math.Subtract(double, double)"/>
        /// <seealso cref="Math.Multiply(double, double)"/>
        /// <seealso cref="Math.Divide(double, double)"/>
        /// <param name="a">A double precision number.</param>
        /// <param name="b">A double precision number.</param>
        public static double Add(double a, double b)
        {
            // If any parameter is equal to the max value of an integer
            // and the other is greater than zero
            if ((a == double.MaxValue && b > 0) 
                || (b == double.MaxValue && a > 0))
            {
                throw new System.OverflowException();
            }

            return a + b;
        }

        // Subtracts an integer from another and returns the result
        /// <summary>
        /// Subtracts <paramref name="b"/> from <paramref name="a"/>
        /// and returns the result.
        /// </summary>
        /// <returns>
        /// The difference between two integers.
        /// </returns>
        /// <example>
        /// <code>
        /// int c = Math.Subtract(4, 5);
        /// if (c > 1)
        /// {
        ///     Console.WriteLine(c);
        /// }
        /// </code>
        /// </example>
        /// See <see cref="Math.Subtract(double, double)"/> to subtract doubles.
        /// <seealso cref="Math.Add(int, int)"/>
        /// <seealso cref="Math.Multiply(int, int)"/>
        /// <seealso cref="Math.Divide(int, int)"/>
        /// <param name="a">An integer.</param>
        /// <param name="b">An integer.</param>
        public static int Subtract(int a, int b)
        {
            return a - b;
        }

        // Subtracts a double from another and returns the result
        /// <summary>
        /// Subtracts a double <paramref name="b"/> from another 
        /// double <paramref name="a"/> and returns the result.
        /// </summary>
        /// <returns>
        /// The difference between two doubles.
        /// </returns>
        /// <example>
        /// <code>
        /// double c = Math.Subtract(4.5, 5.4);
        /// if (c > 1)
        /// {
        ///     Console.WriteLine(c);
        /// }
        /// </code>
        /// </example>
        /// See <see cref="Math.Subtract(int, int)"/> to subtract integers.
        /// <seealso cref="Math.Add(double, double)"/>
        /// <seealso cref="Math.Multiply(double, double)"/>
        /// <seealso cref="Math.Divide(double, double)"/>
        /// <param name="a">A double precision number.</param>
        /// <param name="b">A double precision number.</param>
        public static double Subtract(double a, double b)
        {
            return a - b;
        }

        // Multiplies two integers and returns the result
        /// <summary>
        /// Multiplies two integers <paramref name="a"/> 
        /// and <paramref name="b"/> and returns the result.
        /// </summary>
        /// <returns>
        /// The product of two integers.
        /// </returns>
        /// <example>
        /// <code>
        /// int c = Math.Multiply(4, 5);
        /// if (c > 100)
        /// {
        ///     Console.WriteLine(c);
        /// }
        /// </code>
        /// </example>
        /// See <see cref="Math.Multiply(double, double)"/> to multiply doubles.
        /// <seealso cref="Math.Add(int, int)"/>
        /// <seealso cref="Math.Subtract(int, int)"/>
        /// <seealso cref="Math.Divide(int, int)"/>
        /// <param name="a">An integer.</param>
        /// <param name="b">An integer.</param>
        public static int Multiply(int a, int b)
        {
            return a * b;
        }

        // Multiplies two doubles and returns the result
        /// <summary>
        /// Multiplies two doubles <paramref name="a"/> and
        /// <paramref name="b"/> and returns the result.
        /// </summary>
        /// <returns>
        /// The product of two doubles.
        /// </returns>
        /// <example>
        /// <code>
        /// double c = Math.Multiply(4.5, 5.4);
        /// if (c > 100.0)
        /// {
        ///     Console.WriteLine(c);
        /// }
        /// </code>
        /// </example>
        /// See <see cref="Math.Multiply(int, int)"/> to multiply integers.
        /// <seealso cref="Math.Add(double, double)"/>
        /// <seealso cref="Math.Subtract(double, double)"/>
        /// <seealso cref="Math.Divide(double, double)"/>
        /// <param name="a">A double precision number.</param>
        /// <param name="b">A double precision number.</param>
        public static double Multiply(double a, double b)
        {
            return a * b;
        }

        // Divides an integer by another and returns the result
        /// <summary>
        /// Divides an integer <paramref name="a"/> by another
        /// integer <paramref name="b"/> and returns the result.
        /// </summary>
        /// <returns>
        /// The quotient of two integers.
        /// </returns>
        /// <example>
        /// <code>
        /// int c = Math.Divide(4, 5);
        /// if (c > 1)
        /// {
        ///     Console.WriteLine(c);
        /// }
        /// </code>
        /// </example>
        /// <exception cref="System.DivideByZeroException">
        /// Thrown when <paramref name="b"/> is equal to 0.
        /// </exception>
        /// See <see cref="Math.Divide(double, double)"/> to divide doubles.
        /// <seealso cref="Math.Add(int, int)"/>
        /// <seealso cref="Math.Subtract(int, int)"/>
        /// <seealso cref="Math.Multiply(int, int)"/>
        /// <param name="a">An integer dividend.</param>
        /// <param name="b">An integer divisor.</param>
        public static int Divide(int a, int b)
        {
            return a / b;
        }

        // Divides a double by another and returns the result
        /// <summary>
        /// Divides a double <paramref name="a"/> by another double
        /// <paramref name="b"/> and returns the result.
        /// </summary>
        /// <returns>
        /// The quotient of two doubles.
        /// </returns>
        /// <example>
        /// <code>
        /// double c = Math.Divide(4.5, 5.4);
        /// if (c > 1.0)
        /// {
        ///     Console.WriteLine(c);
        /// }
        /// </code>
        /// </example>
        /// <exception cref="System.DivideByZeroException">
        /// Thrown when <paramref name="b"/> is equal to 0.
        /// </exception>
        /// See <see cref="Math.Divide(int, int)"/> to divide integers.
        /// <seealso cref="Math.Add(double, double)"/>
        /// <seealso cref="Math.Subtract(double, double)"/>
        /// <seealso cref="Math.Multiply(double, double)"/>
        /// <param name="a">A double precision dividend.</param>
        /// <param name="b">A double precision divisor.</param>
        public static double Divide(double a, double b)
        {
            return a / b;
        }
    }
}

Você pode descobrir que o código está obscurecido por todos os comentários. O exemplo final mostra como você adapta essa biblioteca para usar a include marca. Você move toda a documentação para um arquivo XML:

<docs>
  <members name="math">
   <Math>
    <summary>
      The main <c>Math</c> class.
      Contains all methods for performing basic math functions.
      </summary>
      <remarks>
      <para>This class can add, subtract, multiply and divide.</para>
      <para>These operations can be performed on both integers and doubles.</para>
      </remarks>
    </Math>
    <AddInt>
      <summary>
      Adds two integers <paramref name="a"/> and <paramref name="b"/>
      and returns the result.
      </summary>
      <returns>
      The sum of two integers.
      </returns>
      <example>
      <code>
      int c = Math.Add(4, 5);
      if (c > 10)
      {
        Console.WriteLine(c);
      }
      </code>
      </example>
      <exception cref="System.OverflowException">Thrown when one
      parameter is max 
      and the other is greater than 0.</exception>
      See <see cref="Math.Add(double, double)"/> to add doubles.
      <seealso cref="Math.Subtract(int, int)"/>
      <seealso cref="Math.Multiply(int, int)"/>
      <seealso cref="Math.Divide(int, int)"/>
      <param name="a">An integer.</param>
      <param name="b">An integer.</param>
    </AddInt>
    <AddDouble>
      <summary>
      Adds two doubles <paramref name="a"/> and <paramref name="b"/>
      and returns the result.
      </summary>
      <returns>
      The sum of two doubles.
      </returns>
      <example>
      <code>
      double c = Math.Add(4.5, 5.4);
      if (c > 10)
      {
        Console.WriteLine(c);
      }
      </code>
      </example>
      <exception cref="System.OverflowException">Thrown when one parameter is max 
      and the other is greater than 0.</exception>
      See <see cref="Math.Add(int, int)"/> to add integers.
      <seealso cref="Math.Subtract(double, double)"/>
      <seealso cref="Math.Multiply(double, double)"/>
      <seealso cref="Math.Divide(double, double)"/>
      <param name="a">A double precision number.</param>
      <param name="b">A double precision number.</param>
    </AddDouble>
    <SubtractInt>
      <summary>
      Subtracts <paramref name="b"/> from <paramref name="a"/> and
      returns the result.
      </summary>
      <returns>
      The difference between two integers.
      </returns>
      <example>
      <code>
      int c = Math.Subtract(4, 5);
      if (c > 1)
      {
        Console.WriteLine(c);
      }
      </code>
      </example>
      See <see cref="Math.Subtract(double, double)"/> to subtract doubles.
      <seealso cref="Math.Add(int, int)"/>
      <seealso cref="Math.Multiply(int, int)"/>
      <seealso cref="Math.Divide(int, int)"/>
      <param name="a">An integer.</param>
      <param name="b">An integer.</param>
    </SubtractInt>
    <SubtractDouble>
      <summary>
      Subtracts a double <paramref name="b"/> from another
      double <paramref name="a"/> and returns the result.
      </summary>
      <returns>
      The difference between two doubles.
      </returns>
      <example>
      <code>
      double c = Math.Subtract(4.5, 5.4);
      if (c > 1)
      {
        Console.WriteLine(c);
      }
      </code>
      </example>
      See <see cref="Math.Subtract(int, int)"/> to subtract integers.
      <seealso cref="Math.Add(double, double)"/>
      <seealso cref="Math.Multiply(double, double)"/>
      <seealso cref="Math.Divide(double, double)"/>
      <param name="a">A double precision number.</param>
      <param name="b">A double precision number.</param>
    </SubtractDouble>
    <MultiplyInt>
      <summary>
      Multiplies two integers <paramref name="a"/> and
      <paramref name="b"/> and returns the result.
      </summary>
      <returns>
      The product of two integers.
      </returns>
      <example>
      <code>
      int c = Math.Multiply(4, 5);
      if (c > 100)
      {
        Console.WriteLine(c);
      }
      </code>
      </example>
      See <see cref="Math.Multiply(double, double)"/> to multiply doubles.
      <seealso cref="Math.Add(int, int)"/>
      <seealso cref="Math.Subtract(int, int)"/>
      <seealso cref="Math.Divide(int, int)"/>
      <param name="a">An integer.</param>
      <param name="b">An integer.</param>
    </MultiplyInt>
    <MultiplyDouble>
      <summary>
      Multiplies two doubles <paramref name="a"/> and
      <paramref name="b"/> and returns the result.
      </summary>
      <returns>
      The product of two doubles.
      </returns>
      <example>
      <code>
      double c = Math.Multiply(4.5, 5.4);
      if (c > 100.0)
      {
        Console.WriteLine(c);
      }
      </code>
      </example>
      See <see cref="Math.Multiply(int, int)"/> to multiply integers.
      <seealso cref="Math.Add(double, double)"/>
      <seealso cref="Math.Subtract(double, double)"/>
      <seealso cref="Math.Divide(double, double)"/>
      <param name="a">A double precision number.</param>
      <param name="b">A double precision number.</param>
    </MultiplyDouble>
    <DivideInt>
      <summary>
      Divides an integer <paramref name="a"/> by another integer
      <paramref name="b"/> and returns the result.
      </summary>
      <returns>
      The quotient of two integers.
      </returns>
      <example>
      <code>
      int c = Math.Divide(4, 5);
      if (c > 1)
      {
        Console.WriteLine(c);
      }
      </code>
      </example>
      <exception cref="System.DivideByZeroException">
      Thrown when <paramref name="b"/> is equal to 0.
      </exception>
      See <see cref="Math.Divide(double, double)"/> to divide doubles.
      <seealso cref="Math.Add(int, int)"/>
      <seealso cref="Math.Subtract(int, int)"/>
      <seealso cref="Math.Multiply(int, int)"/>
      <param name="a">An integer dividend.</param>
      <param name="b">An integer divisor.</param>
    </DivideInt>
    <DivideDouble>
      <summary>
      Divides a double <paramref name="a"/> by another
      double <paramref name="b"/> and returns the result.
      </summary>
      <returns>
      The quotient of two doubles.
      </returns>
      <example>
      <code>
      double c = Math.Divide(4.5, 5.4);
      if (c > 1.0)
      {
        Console.WriteLine(c);
      }
      </code>
      </example>
      <exception cref="System.DivideByZeroException">Thrown when <paramref name="b"/> is equal to 0.</exception>
      See <see cref="Math.Divide(int, int)"/> to divide integers.
      <seealso cref="Math.Add(double, double)"/>
      <seealso cref="Math.Subtract(double, double)"/>
      <seealso cref="Math.Multiply(double, double)"/>
      <param name="a">A double precision dividend.</param>
      <param name="b">A double precision divisor.</param>
    </DivideDouble>
  </members>
</docs>

No XML anterior, os comentários da documentação de cada membro aparecem diretamente dentro de uma tag nomeada de acordo com o que eles fazem. Você pode escolher sua própria estratégia. O código usa a <include> marca para fazer referência ao elemento apropriado no arquivo XML:

namespace IncludeTag
{

    /*
        The main Math class
        Contains all methods for performing basic math functions
    */
    /// <include file='include.xml' path='docs/members[@name="math"]/Math/*'/>
    public class Math
    {
        // Adds two integers and returns the result
        /// <include file='include.xml' path='docs/members[@name="math"]/AddInt/*'/>
        public static int Add(int a, int b)
        {
            // If any parameter is equal to the max value of an integer
            // and the other is greater than zero
            if ((a == int.MaxValue && b > 0) || (b == int.MaxValue && a > 0))
                throw new System.OverflowException();

            return a + b;
        }

        // Adds two doubles and returns the result
        /// <include file='include.xml' path='docs/members[@name="math"]/AddDouble/*'/>
        public static double Add(double a, double b)
        {
            // If any parameter is equal to the max value of an integer
            // and the other is greater than zero
            if ((a == double.MaxValue && b > 0) || (b == double.MaxValue && a > 0))
                throw new System.OverflowException();

            return a + b;
        }

        // Subtracts an integer from another and returns the result
        /// <include file='include.xml' path='docs/members[@name="math"]/SubtractInt/*'/>
        public static int Subtract(int a, int b)
        {
            return a - b;
        }

        // Subtracts a double from another and returns the result
        /// <include file='include.xml' path='docs/members[@name="math"]/SubtractDouble/*'/>
        public static double Subtract(double a, double b)
        {
            return a - b;
        }

        // Multiplies two integers and returns the result
        /// <include file='include.xml' path='docs/members[@name="math"]/MultiplyInt/*'/>
        public static int Multiply(int a, int b)
        {
            return a * b;
        }

        // Multiplies two doubles and returns the result
        /// <include file='include.xml' path='docs/members[@name="math"]/MultiplyDouble/*'/>
        public static double Multiply(double a, double b)
        {
            return a * b;
        }

        // Divides an integer by another and returns the result
        /// <include file='include.xml' path='docs/members[@name="math"]/DivideInt/*'/>
        public static int Divide(int a, int b)
        {
            return a / b;
        }

        // Divides a double by another and returns the result
        /// <include file='include.xml' path='docs/members[@name="math"]/DivideDouble/*'/>
        public static double Divide(double a, double b)
        {
            return a / b;
        }
    }
}

• O file atributo é o nome do arquivo XML que contém a documentação.
• O path atributo é uma consulta XPath para o nome da tag presente no arquivo especificado.
• O atributo name é o especificador de nome na tag que precede os comentários.
• O atributo id, que você pode usar no lugar de name, é o identificador da tag que precede os comentários.