Editar

Compartilhar via


New-CsOnlinePSTNGateway

Creates a new Session Border Controller (SBC) Configuration that describes the settings for the peer entity. This cmdlet was introduced with Microsoft Phone System Direct Routing.

Syntax

New-CsOnlinePSTNGateway
   [-Identity] <string>
   -SipSignalingPort <int>
   [-BypassMode <string>]
   [-Description <string>]
   [-Enabled <boolean>]
   [-FailoverResponseCodes <string>]
   [-FailoverTimeSeconds <int>]
   [-ForwardCallHistory <boolean>]
   [-ForwardPai <boolean>]
   [-GatewayLbrEnabledUserOverride <boolean>]
   [-GatewaySiteId <string>]
   [-GatewaySiteLbrEnabled <boolean>]
   [-InboundPstnNumberTranslationRules <Object>]
   [-InboundTeamsNumberTranslationRules <Object>]
   [-MaxConcurrentSessions <int>]
   [-MediaBypass <boolean>]
   [-MediaRelayRoutingLocationOverride <string>]
   [-OutboundPstnNumberTranslationRules <Object>]
   [-OutboundTeamsNumberTranslationRules <Object>]
   [-PidfLoSupported <boolean>]
   [-ProxySbc <string>]
   [-SendSipOptions <boolean>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
New-CsOnlinePSTNGateway
   -SipSignalingPort <int>
   -Fqdn <string>
   [-BypassMode <string>]
   [-Description <string>]
   [-Enabled <boolean>]
   [-FailoverResponseCodes <string>]
   [-FailoverTimeSeconds <int>]
   [-ForwardCallHistory <boolean>]
   [-ForwardPai <boolean>]
   [-GatewayLbrEnabledUserOverride <boolean>]
   [-GatewaySiteId <string>]
   [-GatewaySiteLbrEnabled <boolean>]
   [-InboundPstnNumberTranslationRules <Object>]
   [-InboundTeamsNumberTranslationRules <Object>]
   [-MaxConcurrentSessions <int>]
   [-MediaBypass <boolean>]
   [-MediaRelayRoutingLocationOverride <string>]
   [-OutboundPstnNumberTranslationRules <Object>]
   [-OutboundTeamsNumberTranslationRules <Object>]
   [-PidfLoSupported <boolean>]
   [-ProxySbc <string>]
   [-SendSipOptions <boolean>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

Use this cmdlet to create a new Session Border Controller (SBC) configuration. Each configuration contains specific settings for an SBC. These settings configure such entities as the SIP signaling port, whether media bypass is enabled on this SBC, will the SBC send SIP Options, and specify the limit of maximum concurrent sessions. The cmdlet also lets the administrator drain the SBC by setting parameter -Enabled to $true or $false state. When the Enabled parameter is set to $false, the SBC will continue existing calls, but all new calls will be routed to another SBC in a route (if one exists).

Examples

Example 1

PS C:\> New-CsOnlinePSTNGateway -FQDN sbc.contoso.com -SIPSignalingPort 5061

This example creates an SBC with FQDN sbc.contoso.com and signaling port 5061. All others parameters will stay default. Note the SBC will be in the disabled state.

Example 2

PS C:\> New-CsOnlinePSTNGateway -FQDN sbc.contoso.com -SIPSignalingPort 5061 -ForwardPAI $true -Enabled $true

This example creates an SBC with FQDN sbc.contoso.com and signaling port 5061. For each outbound to SBC session, the Direct Routing interface will report in P-Asserted-Identity fields the TEL URI and SIP address of the user who made a call. This is useful when a tenant administrator sets the identity of the caller as "Anonymous" or a general number of the company, but for billing purposes the real identity of the user is required.

Parameters

-BypassMode

Possible values are "None", "Always" and "OnlyForLocalUsers". By setting "Always" mode you indicate that your network is fully routable. If a user usually in site "Seattle", travels to site "Tallinn" and tries to use SBC located in Seattle we will try to deliver the traffic to Seattle assuming that there is connection between Tallinn and Seattle offices. With "OnlyForLocaUsers" you indicate that there is no direct connection between sites. In example above, the traffic will not be send directly from Tallinn to Seattle.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Microsoft Teams

-Description

Free-format string to describe the gateway.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Microsoft Teams

-Enabled

Used to enable this SBC for outbound calls. Can be used to temporarily remove the SBC from service while it is being updated or during maintenance. Note if the parameter is not set the SBC will be created as disabled (default value -Enabled $false).

Type:Boolean
Position:Named
Default value:$false
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Microsoft Teams

-FailoverResponseCodes

If Direct Routing receives any 4xx or 6xx SIP error code in response to an outgoing Invite the call is considered completed by default. (Outgoing in this context is a call from a Teams client to the PSTN with traffic flow: Teams Client -> Direct Routing -> SBC -> Telephony network). Setting the SIP codes in this parameter forces Direct Routing on receiving the specified codes try another SBC (if another SBC exists in the voice routing policy of the user). Find more information in the "Reference" section of "Phone System Direct Routing" documentation.

Setting this parameter overwrites the default values, so if you want to include the default values, please add them to string.

Type:String
Position:Named
Default value:408, 503, 504
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Microsoft Teams

-FailoverTimeSeconds

When set to 10 (default value), outbound calls that are not answered by the gateway within 10 seconds are routed to the next available trunk; if there are no additional trunks, then the call is automatically dropped. In an organization with slow networks and slow gateway responses, that could potentially result in calls being dropped unnecessarily. The default value is 10.

Type:Int32
Position:Named
Default value:10
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Microsoft Teams

-ForwardCallHistory

Indicates whether call history information will be forwarded to the SBC. If enabled, the Office 365 PSTN Proxy sends two headers: History-info and Referred-By. The default value is False ($False).

Type:Boolean
Position:Named
Default value:$false
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Microsoft Teams

-ForwardPai

Indicates whether the P-Asserted-Identity (PAI) header will be forwarded along with the call. The PAI header provides a way to verify the identity of the caller. The default value is False ($False). Setting this parameter to $true will render the from header anonymous, in accordance of RFC5379 and RFC3325.

Type:Boolean
Position:Named
Default value:$false
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Microsoft Teams

-Fqdn

Limited to 63 characters, the FQDN registered for the SBC. Copied automatically to Identity of the SBC field.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Microsoft Teams

-GatewayLbrEnabledUserOverride

Allows an LBR enabled user working from a network site outside the corporate network or a network site on the corporate network not configured using a tenant network site to make outbound PSTN calls or receive inbound PSTN calls via an LBR enabled gateway. The default value is False.

Type:Boolean
Position:Named
Default value:$false
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Microsoft Teams

-GatewaySiteId

PSTN Gateway Site Id.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Microsoft Teams

-GatewaySiteLbrEnabled

Used to enable this SBC to report assigned site location. Site location is used for Location Based Routing. When this parameter is enabled ($True), the SBC will report the site name as defined by the tenant administrator. On an incoming call to a Teams user the value of the site assigned to the SBC is compared with the value of the site assigned to the user to make a routing decision. The parameter is mandatory for enabling Location Based Routing feature. The default value is False ($False).

Type:Boolean
Position:Named
Default value:$false
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Microsoft Teams

-Identity

When creating a new SBC, the identity must be identical to the -FQDN parameter, described above. If the parameter is not defined the Identity will be copied from the -FQDN parameter. The Identity parameter is not mandatory.

Type:String
Position:1
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Microsoft Teams

-InboundPSTNNumberTranslationRules

Creates an ordered list of Teams translation rules, that apply to PSTN number on inbound direction.

Type:Object
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-InboundTeamsNumberTranslationRules

This parameter assigns an ordered list of Teams translation rules, that apply to Teams numbers on inbound direction.

Type:Object
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-MaxConcurrentSessions

Used by the alerting system. When any value is set, the alerting system will generate an alert to the tenant administrator when the number of concurrent sessions is 90% or higher than this value. If the parameter is not set, alerts are not generated. However, the monitoring system will report the number of concurrent sessions every 24 hours.

Type:System.Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Microsoft Teams

-MediaBypass

Parameter indicates if the SBC supports Media Bypass and the administrator wants to use it for this SBC.

Type:Boolean
Position:Named
Default value:$false
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Microsoft Teams

-MediaRelayRoutingLocationOverride

Allows selecting path for media manually. Direct Routing assigns a datacenter for media path based on the public IP of the SBC. We always select closest to the SBC datacenter. However, in some cases a public IP from for example a US range can be assigned to an SBC located in Europe. In this case we will be using not optimal media path. We only recommend setting this parameter if the call logs clearly indicate that automatic assignment of the datacenter for media path does not assign the closest to the SBC datacenter.

Type:String
Position:Named
Default value:$false
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Microsoft Teams

-OutboundPSTNNumberTranslationRules

Assigns an ordered list of Teams translation rules, that apply to PSTN number on outbound direction.

Type:Object
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-OutbundTeamsNumberTranslationRules

Creates an ordered list of Teams translation rules, that apply to Teams Number on outbound direction.

Type:Object
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-PidfloSupported

Enables PIDF-LO support on the PSTN Gateway. If turned on the .xml body payload is sent to the SBC with the location details of the user.

Type:Boolean
Position:Named
Default value:$false
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Microsoft Teams

-ProxySbc

The FQDN of the proxy SBC. Used in Local Media Optimization configurations.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Microsoft Teams

-SendSipOptions

Defines if an SBC will or will not send SIP Options messages. If disabled, the SBC will be excluded from the Monitoring and Alerting system. We highly recommend that you enable SIP Options. The default value is True.

Type:Boolean
Position:Named
Default value:$true
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Microsoft Teams

-SipSignalingPort

Listening port used for communicating with Direct Routing services by using the Transport Layer Security (TLS) protocol. Must be value between 1 and 65535. Please note: Spelling of this parameter changed recently from SipSignallingPort to SipSignalingPort.

Type:Int32
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Microsoft Teams

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Microsoft Teams

Inputs

None

Outputs

System.Object