Compartilhar via


NDIS_GET_PACKET_MEDIA_SPECIFIC_INFO function

Note   NDIS 5. x has been deprecated and is superseded by NDIS 6. x. For new NDIS driver development, see Network Drivers Starting with Windows Vista. For information about porting NDIS 5. x drivers to NDIS 6. x, see Porting NDIS 5.x Drivers to NDIS 6.0.

NDIS_GET_PACKET_MEDIA_SPECIFIC_INFO returns the MediaSpecificInformation pointer and the SizeMediaSpecificInfo value from the out-of-band data block associated with a given packet descriptor.

Syntax

VOID NDIS_GET_PACKET_MEDIA_SPECIFIC_INFO(
  _In_ PNDIS_PACKET Packet,
  _In_ PPVOID       pMediaSpecificInfo,
  _In_ PUINT        pSizeMediaSpecificInfo
);

Parameters

  • Packet [in]
    Pointer to a packet descriptor.

  • pMediaSpecificInfo [in]
    Pointer to a caller supplied variable that this macro sets to the MediaSpecificInformation pointer. The returned address gives the caller access to any buffered out-of-band information, such as packet priority, associated with the specified net packet indicated or to be transmitted.

  • pSizeMediaSpecificInfo [in]
    Pointer to a caller-supplied variable that this macro sets to the SizeMediaSpecificInfo value, which specifies the size in bytes of the buffer at MediaSpecificInformation.

Return value

None

Remarks

NDIS_GET_PACKET_MEDIA_SPECIFIC_INFO returns a NULL pointer at pMediaSpecificInfo and zero at pSizeMediaSpecificInfo if there is no media-specific information in the NDIS_PACKET_OOB_DATA block associated with the given packet descriptor.

Depending on the medium, a miniport driver might set these members with NDIS_SET_PACKET_MEDIA_SPECIFIC_INFO in the out-of-band data blocks associated with the packet descriptors it allocates for receive indications.

Depending on the medium of the underlying driver to which it is bound, a protocol might set MediaSpecificInformation and SizeMediaSpecificInfo in the out-of-band blocks associated with the packet descriptors it allocates for sends.

In either case, while a higher-level protocol is consuming a receive indication or a lower-level miniport driver is processing a send, that driver must have exclusive access to the buffer at MediaSpecificInformation. This restriction implies the following:

  • A miniport driver cannot access the buffer it set up with media-specific information when NdisMIndicateReceivePacket returns control if NDIS_STATUS_PENDING is set in the Status member of the associated out-of-band block. The driver can use NDIS_GET_PACKET_STATUS to determine whether each packet in the packet array it just indicated has this status set or has been returned with NDIS_STATUS_SUCCESS.

  • A protocol driver cannot access the media-specific information buffer it set up for a send, nor anything else in the out-of-band data block associated with a packet descriptor it passes to NdisSendPackets or NdisSend, until the packet descriptor is returned to its ProtocolSendComplete function.

    Because NDIS queues send packets and resubmits them if the MiniportSend function returns NDIS_STATUS_RESOURCES or if the MiniportSendPackets function sets NDIS_STATUS_RESOURCES for the Status of a packet in a submitted array, the final status of each packet in a send (array) is volatile until that packet has been returned to ProtocolSendComplete.

A protocol driver can call NdisGetReceivedPacket followed by NDIS_GET_ORIGINAL_PACKET to obtain this information from the NDIS_PACKET_OOB_DATA block associated with a packet descriptor when its ProtocolReceive function is given an indication. However, these calls are superfluous if the protocol is bound to an underlying driver that does not supply out-of-band information with its indications.

Requirements

Target platform

Desktop

Header

Ndis.h (include Ndis.h)

IRQL

<= DISPATCH_LEVEL

See also

MiniportHandleInterrupt

MiniportSend

MiniportSendPackets

MiniportTimer

NdisAllocatePacket

NDIS_GET_ORIGINAL_PACKET

NdisGetReceivedPacket

NdisMIndicateReceivePacket

NDIS_OOB_DATA_FROM_PACKET

NDIS_PACKET_OOB_DATA

NdisSend

NdisSendPackets

NDIS_SET_PACKET_MEDIA_SPECIFIC_INFO

ProtocolReceive

ProtocolReceivePacket

ProtocolSendComplete

 

 

Send comments about this topic to Microsoft