TaskScheduler.SetTaskReady(Guid [, DateTime]) Method
Version: Available or changed with runtime version 1.0.
Sets a task that runs a codeunit to the ready state. The task will not run unless it is in the ready state.
Syntax
[Ok := ] TaskScheduler.SetTaskReady(Task: Guid [, NotBefore: DateTime])
Parameters
Task
Type: Guid
[Optional] NotBefore
Type: DateTime
Return Value
[Optional] Ok
Type: Boolean
Remarks
Scheduled tasks are shown in the Scheduled Tasks page in the client.
If no task exists with the task GUID provided to TaskScheduler.SetTaskReady
, then the method will return false (no runtime error will occur).
For more information about the task scheduler, see Using the Task Scheduler.
Example
The following example creates a task, which isn't in IsReady
state, then it does some more work, and finally it uses the SetTaskReady
method to set the task to ready, but also to start at a later specified time (task ready time + 60 seconds + up to 3 seconds of random time).
var
TaskID: GUID;
begin
// Third parameter to TaskScheduler.CreateTask controls IsReady at task creation time
TaskID := TaskScheduler.CreateTask(CodeUnit::MyCodeUnit, CodeUnit::MyFailureCodeUnit, false);
// do something more work needed before starting the task
// set the task ready and to start after
TaskScheduler.SetTaskReady(TaskID, CurrentDateTime + 60*1000 + Random(3000));
end;
See also
TaskScheduler Data Type
Using the Task Scheduler
Get Started with AL
Developing Extensions
Feedback
https://aka.ms/ContentUserFeedback.
În curând: Pe parcursul anului 2024, vom elimina treptat Probleme legate de GitHub ca mecanism de feedback pentru conținut și îl vom înlocui cu un nou sistem de feedback. Pentru mai multe informații, consultați:Trimiteți și vizualizați feedback pentru