Attribute.GetCustomAttributes Метод

Ссылка

Определение

Пространство имен:: System

Сборка:: System.Runtime.dll

Сборка:: mscorlib.dll

Сборка:: netstandard.dll

Важно!

Некоторые сведения относятся к предварительной версии продукта, в которую до выпуска могут быть внесены существенные изменения. Майкрософт не предоставляет никаких гарантий, явных или подразумеваемых, относительно приведенных здесь сведений.

Извлекает массив настраиваемых атрибутов, применяемых к сборке, модулю, элементу типа или параметру метода.

Перегрузки

GetCustomAttributes(ParameterInfo, Boolean)	Извлекает массив настраиваемых атрибутов, применяемых к параметру метода. Параметры указывают параметр метода и следует ли выполнять поиск предков параметра метода.
GetCustomAttributes(MemberInfo, Type, Boolean)	Извлекает массив настраиваемых атрибутов, применяемых к элементу типа. Параметры указывают элемент, тип настраиваемого атрибута для поиска и поиск предков элемента.
GetCustomAttributes(ParameterInfo, Type, Boolean)	Извлекает массив настраиваемых атрибутов, применяемых к параметру метода. Параметры указывают параметр метода, тип настраиваемого атрибута для поиска и поиск предков параметра метода.
GetCustomAttributes(Module, Type, Boolean)	Извлекает массив настраиваемых атрибутов, применяемых к модулю. Параметры указывают модуль, тип настраиваемого атрибута для поиска и игнорируемый параметр поиска.
GetCustomAttributes(MemberInfo, Type)	Извлекает массив настраиваемых атрибутов, применяемых к элементу типа. Параметры указывают элемент и тип настраиваемого атрибута для поиска.
GetCustomAttributes(Assembly, Type, Boolean)	Извлекает массив настраиваемых атрибутов, применяемых к сборке. Параметры указывают сборку, тип настраиваемого атрибута для поиска и игнорируемый параметр поиска.
GetCustomAttributes(Module, Type)	Извлекает массив настраиваемых атрибутов, применяемых к модулю. Параметры указывают модуль и тип настраиваемого атрибута для поиска.
GetCustomAttributes(ParameterInfo, Type)	Извлекает массив настраиваемых атрибутов, применяемых к параметру метода. Параметры указывают параметр метода и тип настраиваемого атрибута для поиска.
GetCustomAttributes(MemberInfo, Boolean)	Извлекает массив настраиваемых атрибутов, применяемых к элементу типа. Параметры указывают элемент, тип настраиваемого атрибута для поиска и поиск предков элемента.
GetCustomAttributes(Assembly, Type)	Извлекает массив настраиваемых атрибутов, применяемых к сборке. Параметры указывают сборку и тип пользовательского атрибута для поиска.
GetCustomAttributes(Assembly, Boolean)	Извлекает массив настраиваемых атрибутов, применяемых к сборке. Параметры указывают сборку и игнорируемый параметр поиска.
GetCustomAttributes(ParameterInfo)	Извлекает массив настраиваемых атрибутов, применяемых к параметру метода. Параметр задает параметр метода.
GetCustomAttributes(Module)	Извлекает массив настраиваемых атрибутов, применяемых к модулю. Параметр задает модуль.
GetCustomAttributes(MemberInfo)	Извлекает массив настраиваемых атрибутов, применяемых к элементу типа. Параметр задает элемент.
GetCustomAttributes(Assembly)	Извлекает массив настраиваемых атрибутов, применяемых к сборке. Параметр задает сборку.
GetCustomAttributes(Module, Boolean)	Извлекает массив настраиваемых атрибутов, применяемых к модулю. Параметры указывают модуль и игнорируемый параметр поиска.

GetCustomAttributes(ParameterInfo, Boolean)

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Извлекает массив настраиваемых атрибутов, применяемых к параметру метода. Параметры указывают параметр метода и следует ли выполнять поиск предков параметра метода.

public:
 static cli::array <Attribute ^> ^ GetCustomAttributes(System::Reflection::ParameterInfo ^ element, bool inherit);

public static Attribute[] GetCustomAttributes (System.Reflection.ParameterInfo element, bool inherit);

static member GetCustomAttributes : System.Reflection.ParameterInfo * bool -> Attribute[]

Public Shared Function GetCustomAttributes (element As ParameterInfo, inherit As Boolean) As Attribute()

Параметры

element: ParameterInfo

Объект, производный от класса ParameterInfo, описывающего параметр члена класса.

inherit: Boolean

Если true, то указывает также поиск предков element для пользовательских атрибутов.

Возвращаемое значение

Attribute[]

Массив Attribute, содержащий настраиваемые атрибуты, применяемые к element, или пустой массив, если такие настраиваемые атрибуты отсутствуют.

Исключения

ArgumentException

Свойство Memberelement равно null.

ArgumentNullException

element null.

TypeLoadException

Не удается загрузить пользовательский тип атрибута.

Примеры

В следующем примере кода показано использование GetCustomAttributes, принимая ParameterInfo в качестве параметра.

using namespace System;
using namespace System::Reflection;
using namespace System::ComponentModel;

namespace CustAttrs5CS
{
   public ref class AClass
   {
   public:
      void ParamArrayAndDesc(
         // Add ParamArray and Description attributes.
         [Description("This argument is a ParamArray")]
         array<Int32>^args )
      {}
   };

   ref class DemoClass
   {
   public:
      static void Main()
      {
         // Get the Class type to access its metadata.
         Type^ clsType = AClass::typeid;

         // Get the type information for the method.
         MethodInfo^ mInfo = clsType->GetMethod( "ParamArrayAndDesc" );
         if ( mInfo != nullptr )
         {
            // Get the parameter information.
            array<ParameterInfo^>^pInfo = mInfo->GetParameters();
            if ( pInfo != nullptr )
            {
               // Iterate through all the attributes for the parameter.
               System::Collections::IEnumerator^ myEnum4 = Attribute::GetCustomAttributes( pInfo[ 0 ] )->GetEnumerator();
               while ( myEnum4->MoveNext() )
               {
                  Attribute^ attr = safe_cast<Attribute^>(myEnum4->Current);

                  // Check for the ParamArray attribute.
                  if ( attr->GetType() == ParamArrayAttribute::typeid )
                                    Console::WriteLine( "Parameter {0} for method {1} "
                  "has the ParamArray attribute.", pInfo[ 0 ]->Name, mInfo->Name );
                  // Check for the Description attribute.
                  else

                  // Check for the Description attribute.
                  if ( attr->GetType() == DescriptionAttribute::typeid )
                  {
                     Console::WriteLine( "Parameter {0} for method {1} "
                     "has a description attribute.", pInfo[ 0 ]->Name, mInfo->Name );
                     Console::WriteLine( "The description is: \"{0}\"", (dynamic_cast<DescriptionAttribute^>(attr))->Description );
                  }
               }
            }
         }
      }
   };
}

/*
 * Output:
 * Parameter args for method ParamArrayAndDesc has the ParamArray attribute.
 * Parameter args for method ParamArrayAndDesc has a description attribute.
 * The description is: "This argument is a ParamArray"
 */

using System;
using System.Reflection;
using System.ComponentModel;

namespace CustAttrs5CS {
    public class AClass {
        public void ParamArrayAndDesc(
            // Add ParamArray (with the keyword) and Description attributes.
            [Description("This argument is a ParamArray")]
            params int[] args)
        {}
    }

    class DemoClass {
        static void Main(string[] args) {
            // Get the Class type to access its metadata.
            Type clsType = typeof(AClass);
            // Get the type information for the method.
            MethodInfo mInfo = clsType.GetMethod("ParamArrayAndDesc");
            if (mInfo != null) {
                // Get the parameter information.
                ParameterInfo[] pInfo = mInfo.GetParameters();
                if (pInfo != null) {
                    // Iterate through all the attributes for the parameter.
                    foreach(Attribute attr in
                        Attribute.GetCustomAttributes(pInfo[0])) {
                        // Check for the ParamArray attribute.
                        if (attr.GetType() == typeof(ParamArrayAttribute))
                            Console.WriteLine("Parameter {0} for method {1} " +
                                "has the ParamArray attribute.",
                                pInfo[0].Name, mInfo.Name);
                        // Check for the Description attribute.
                        else if (attr.GetType() ==
                            typeof(DescriptionAttribute)) {
                            Console.WriteLine("Parameter {0} for method {1} " +
                                "has a description attribute.",
                                pInfo[0].Name, mInfo.Name);
                            Console.WriteLine("The description is: \"{0}\"",
                                ((DescriptionAttribute)attr).Description);
                        }
                    }
                }
            }
        }
    }
}

/*
 * Output:
 * Parameter args for method ParamArrayAndDesc has the ParamArray attribute.
 * Parameter args for method ParamArrayAndDesc has a description attribute.
 * The description is: "This argument is a ParamArray"
 */

open System
open System.Reflection
open System.ComponentModel

type AClass() =
    member _.ParamArrayAndDesc(
        // Add ParamArray and Description attributes.
        [<Description "This argument is a ParamArray">]
        [<ParamArray>]
        args: int[]) = ()

// Get the Class type to access its metadata.
let clsType = typeof<AClass>

// Get the type information for the method.
let mInfo = clsType.GetMethod "ParamArrayAndDesc"
if mInfo <> null then
    // Get the parameter information.
    let pInfo = mInfo.GetParameters()
    if pInfo <> null then
        // Iterate through all the attributes for the parameter.
        for attr in Attribute.GetCustomAttributes pInfo[0] do
            match attr with 
            // Check for the ParamArray attribute.
            | :? ParamArrayAttribute ->
                printfn $"Parameter {pInfo[0].Name} for method {mInfo.Name} has the ParamArray attribute."
                                
            // Check for the Description attribute.
            | :? DescriptionAttribute as attr ->
                printfn $"Parameter {pInfo[0].Name} for method {mInfo.Name} has a description attribute."
                printfn $"The description is: \"{attr.Description}\""
            | _ -> ()

// Output:
// Parameter args for method ParamArrayAndDesc has a description attribute.
// The description is: "This argument is a ParamArray"
// Parameter args for method ParamArrayAndDesc has the ParamArray attribute.

Imports System.Reflection
Imports System.ComponentModel

Module DemoModule
    Public Class AClass
        ' Add Description and ParamArray (with the keyword) attributes.
        Public Sub ParamArrayAndDesc( _
            <Description("This argument is a ParamArray")> _
            ByVal ParamArray args() As Integer)
        End Sub
    End Class

    Sub Main()
        ' Get the Class type to access its metadata.
        Dim clsType As Type = GetType(AClass)
        ' Get the type information for the method.
        Dim mInfo As MethodInfo = clsType.GetMethod("ParamArrayAndDesc")
        ' Get the Parameter information for the method.
        Dim pInfo() As ParameterInfo = mInfo.GetParameters()
        Dim attr As Attribute
        ' Iterate through each attribute of the parameter.
        For Each attr In Attribute.GetCustomAttributes(pInfo(0))
            ' Check for the ParamArray attribute.
            If TypeOf attr Is ParamArrayAttribute Then
                ' Convert the attribute to access its data.
                Dim paAttr As ParamArrayAttribute = _
                    CType(attr, ParamArrayAttribute)
                Console.WriteLine("Parameter {0} for method {1} has the " + _
                    "ParamArray attribute.", pInfo(0).Name, mInfo.Name)
            ' Check for the Description attribute.
            ElseIf TypeOf attr Is DescriptionAttribute Then
                ' Convert the attribute to access its data.
                Dim descAttr As DescriptionAttribute = _
                    CType(attr, DescriptionAttribute)
                Console.WriteLine("Parameter {0} for method {1} has a description " + _
                    "attribute. The description is:", pInfo(0).Name, mInfo.Name)
                Console.WriteLine(descAttr.Description)
            End If
        Next
    End Sub
End Module

' Output:
' Parameter args for method ParamArrayAndDesc has the ParamArray attribute.
' Parameter args for method ParamArrayAndDesc has a description attribute. The description is:
' This argument is a ParamArray

Если element представляет параметр в методе производного типа, возвращаемое значение включает наследуемые настраиваемые атрибуты, применяемые к тому же параметру в переопределенных базовых методах.

Применяется к

GetCustomAttributes(MemberInfo, Type, Boolean)

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Извлекает массив настраиваемых атрибутов, применяемых к элементу типа. Параметры указывают элемент, тип настраиваемого атрибута для поиска и поиск предков элемента.

public:
 static cli::array <Attribute ^> ^ GetCustomAttributes(System::Reflection::MemberInfo ^ element, Type ^ type, bool inherit);

public:
 static cli::array <Attribute ^> ^ GetCustomAttributes(System::Reflection::MemberInfo ^ element, Type ^ attributeType, bool inherit);

public static Attribute[] GetCustomAttributes (System.Reflection.MemberInfo element, Type type, bool inherit);

public static Attribute[] GetCustomAttributes (System.Reflection.MemberInfo element, Type attributeType, bool inherit);

static member GetCustomAttributes : System.Reflection.MemberInfo * Type * bool -> Attribute[]

static member GetCustomAttributes : System.Reflection.MemberInfo * Type * bool -> Attribute[]

Public Shared Function GetCustomAttributes (element As MemberInfo, type As Type, inherit As Boolean) As Attribute()

Public Shared Function GetCustomAttributes (element As MemberInfo, attributeType As Type, inherit As Boolean) As Attribute()

Параметры

element: MemberInfo

Объект, производный от класса MemberInfo, описывающего конструктор, событие, поле, метод или элемент свойства класса.

typeattributeType: Type

Тип или базовый тип настраиваемого атрибута для поиска.

inherit: Boolean

Если true, то указывает также поиск предков element для пользовательских атрибутов.

Возвращаемое значение

Attribute[]

Массив Attribute, содержащий настраиваемые атрибуты типа type применены к element, или пустой массив, если такие настраиваемые атрибуты отсутствуют.

Исключения

ArgumentNullException

element или typenull.

ArgumentException

type не является производным от Attribute.

NotSupportedException

element не является конструктором, методом, свойством, событием, типом или полем.

TypeLoadException

Не удается загрузить пользовательский тип атрибута.

Примеры

В следующем примере кода показано использование GetCustomAttributes, принимая MemberInfo в качестве параметра.

using namespace System;
using namespace System::Reflection;
using namespace System::Security;
using namespace System::Runtime::InteropServices;

namespace CustAttrs4CS
{
   // Create a class for Win32 imported unmanaged functions.
   public ref class Win32
   {
   public:

      [DllImport("user32.dll", CharSet = CharSet::Unicode)]
      static int MessageBox( int hWnd, String^ text, String^ caption, UInt32 type );
   };

   public ref class AClass
   {
   public:

      // Add some attributes to the Win32CallMethod.

      [Obsolete("This method is obsolete. Use managed MsgBox instead.")]
      void Win32CallMethod()
      {
         Win32::MessageBox( 0, "This is an unmanaged call.", "Be Careful!", 0 );
      }

   };

   ref class DemoClass
   {
   public:
      static void Main()
      {
         // Get the Class type to access its metadata.
         Type^ clsType = AClass::typeid;

         // Get the type information for the Win32CallMethod.
         MethodInfo^ mInfo = clsType->GetMethod( "Win32CallMethod" );
         if ( mInfo != nullptr )
         {
            // Iterate through all the attributes for the method.
            System::Collections::IEnumerator^ myEnum3 = Attribute::GetCustomAttributes( mInfo )->GetEnumerator();
            while ( myEnum3->MoveNext() )
            {
               Attribute^ attr = safe_cast<Attribute^>(myEnum3->Current);

               // Check for the Obsolete attribute.
               if ( attr->GetType() == ObsoleteAttribute::typeid )
               {
                  Console::WriteLine( "Method {0} is obsolete. "
                  "The message is:", mInfo->Name );
                  Console::WriteLine( (dynamic_cast<ObsoleteAttribute^>(attr))->Message );
               }
               // Check for the SuppressUnmanagedCodeSecurity attribute.
               else

               // Check for the SuppressUnmanagedCodeSecurity attribute.
               if ( attr->GetType() == SuppressUnmanagedCodeSecurityAttribute::typeid )
               {
                  Console::WriteLine( "This method calls unmanaged code "
                  "with no security check." );
                  Console::WriteLine( "Please do not use unless absolutely necessary." );
                  AClass^ myCls = gcnew AClass;
                  myCls->Win32CallMethod();
               }
            }
         }
      }
   };
}


/*
 * Output:
 * Method Win32CallMethod is obsolete. The message is:
 * This method is obsolete. Use managed MsgBox instead.
 * This method calls unmanaged code with no security check.
 * Please do not use unless absolutely necessary.
 */

using System;
using System.Reflection;
using System.Security;
using System.Runtime.InteropServices;

namespace CustAttrs4CS
{

    // Define an enumeration of Win32 unmanaged types
    public enum UnmanagedType
    {
        User,
        GDI,
        Kernel,
        Shell,
        Networking,
        Multimedia
    }

    // Define the Unmanaged attribute.
    public class UnmanagedAttribute : Attribute
    {
        // Storage for the UnmanagedType value.
        protected UnmanagedType thisType;

        // Set the unmanaged type in the constructor.
        public UnmanagedAttribute(UnmanagedType type)
        {
            thisType = type;
        }

        // Define a property to get and set the UnmanagedType value.
        public UnmanagedType Win32Type
        {
            get { return thisType; }
            set { thisType = Win32Type; }
        }
    }

    // Create a class for an imported Win32 unmanaged function.
    public class Win32 {
        [DllImport("user32.dll", CharSet = CharSet.Unicode)]
        public static extern int MessageBox(int hWnd, String text,
            String caption, uint type);
    }

    public class AClass {
        // Add some attributes to Win32CallMethod.
        [Obsolete("This method is obsolete. Use managed MsgBox instead.")]
        [Unmanaged(UnmanagedType.User)]
        public void Win32CallMethod()
        {
            Win32.MessageBox(0, "This is an unmanaged call.", "Caution!", 0);
        }
    }

    class DemoClass {
        static void Main(string[] args)
            {
            // Get the AClass type to access its metadata.
            Type clsType = typeof(AClass);
            // Get the type information for Win32CallMethod.
            MethodInfo mInfo = clsType.GetMethod("Win32CallMethod");
            if (mInfo != null)
            {
                // Iterate through all the attributes of the method.
                foreach(Attribute attr in
                    Attribute.GetCustomAttributes(mInfo)) {
                    // Check for the Obsolete attribute.
                    if (attr.GetType() == typeof(ObsoleteAttribute))
                    {
                        Console.WriteLine("Method {0} is obsolete. " +
                            "The message is:",
                            mInfo.Name);
                        Console.WriteLine("  \"{0}\"",
                            ((ObsoleteAttribute)attr).Message);
                    }

                    // Check for the Unmanaged attribute.
                    else if (attr.GetType() == typeof(UnmanagedAttribute))
                    {
                        Console.WriteLine(
                            "This method calls unmanaged code.");
                        Console.WriteLine(
                            String.Format("The Unmanaged attribute type is {0}.",
                                          ((UnmanagedAttribute)attr).Win32Type));
                        AClass myCls = new AClass();
                        myCls.Win32CallMethod();
                    }
                }
            }
        }
    }
}

/*

This code example produces the following results.

First, the compilation yields the warning, "... This method is
obsolete. Use managed MsgBox instead."
Second, execution yields a message box with a title of "Caution!"
and message text of "This is an unmanaged call."
Third, the following text is displayed in the console window:

Method Win32CallMethod is obsolete. The message is:
  "This method is obsolete. Use managed MsgBox instead."
This method calls unmanaged code.
The Unmanaged attribute type is User.

*/

open System
open System.Runtime.InteropServices

// Define an enumeration of Win32 unmanaged types
type UnmanagedType =
    | User = 0
    | GDI = 1
    | Kernel = 2
    | Shell = 3
    | Networking = 4
    | Multimedia = 5

// Define the Unmanaged attribute.
type UnmanagedAttribute(unmanagedType) =
    inherit Attribute()
    
    // Define a property to get and set the UnmanagedType value.
    member val Win32Type = unmanagedType with get, set

// Create a module for an imported Win32 unmanaged function.
module Win32 =
    [<DllImport("user32.dll", CharSet = CharSet.Unicode)>]
    extern int MessageBox(IntPtr hWnd, String text, String caption, uint ``type``)

type AClass() =
    // Add some attributes to Win32CallMethod.
    [<Obsolete "This method is obsolete. Use managed MsgBox instead.">]
    [<Unmanaged(UnmanagedType.User)>]
    member _.Win32CallMethod () =
        Win32.MessageBox(0, "This is an unmanaged call.", "Caution!", 0u)

// Get the AClass type to access its metadata.
let clsType = typeof<AClass>
// Get the type information for Win32CallMethod.
let mInfo = clsType.GetMethod "Win32CallMethod"
if mInfo <> null then
    // Iterate through all the attributes of the method.
    for attr in Attribute.GetCustomAttributes mInfo do
        match attr with 
        // Check for the Obsolete attribute.
        | :? ObsoleteAttribute as attr ->
            printfn $"Method {mInfo.Name} is obsolete. The message is:"
            printfn $"  \"{attr.Message}\""

        // Check for the Unmanaged attribute.
        | :? UnmanagedAttribute as attr ->
            printfn "This method calls unmanaged code."
            printfn $"The Unmanaged attribute type is {attr.Win32Type}."
            let myCls = AClass()
            myCls.Win32CallMethod() |> ignore
        | _ -> ()

// This code example produces the following results.
//
// First, the compilation yields the warning, "... This method is
// obsolete. Use managed MsgBox instead."
// Second, execution yields a message box with a title of "Caution!"
// and message text of "This is an unmanaged call."
// Third, the following text is displayed in the console window:

// Method Win32CallMethod is obsolete. The message is:
//   "This method is obsolete. Use managed MsgBox instead."
// This method calls unmanaged code.
// The Unmanaged attribute type is User.

Imports System.Reflection
Imports System.Security
Imports System.Runtime.InteropServices

' Define an enumeration of Win32 unmanaged types
Public Enum UnmanagedType
    User
    GDI
    Kernel
    Shell
    Networking
    Multimedia
End Enum 'UnmanagedType

' Define the Unmanaged attribute.
Public Class UnmanagedAttribute 
             Inherits Attribute

    ' Storage for the UnmanagedType value.
    Protected thisType As UnmanagedType
    
    ' Set the unmanaged type in the constructor.
    Public Sub New(ByVal type As UnmanagedType) 
        thisType = type
    End Sub
    
    ' Define a property to get and set the UnmanagedType value.
    Public Property Win32Type() As UnmanagedType 
        Get
            Return thisType
        End Get
        Set
            thisType = Win32Type
        End Set
    End Property
End Class

' Create a class for an imported Win32 unmanaged function.
Public Class Win32
    <DllImport("user32.dll", CharSet:=CharSet.Unicode)> _
    Public Shared Function MessageBox(ByVal hWnd As Integer, _
                                      ByVal Text As String, _
                                      ByVal caption As String, _
                                      ByVal type As Integer) As Integer
    End Function 'MessageBox
End Class

Public Class AClass
    ' Add some attributes to Win32CallMethod.
    <Obsolete("This method is obsolete. Use managed MsgBox instead."), _
     Unmanaged(UnmanagedType.User)>  _
    Public Sub Win32CallMethod() 
        Win32.MessageBox(0, "This is an unmanaged call.", "Caution!", 0)    
    End Sub
End Class

Class DemoClass
    Shared Sub Main(ByVal args() As String) 
        ' Get the AClass type to access its metadata.
        Dim clsType As Type = GetType(AClass)
        ' Get the type information for Win32CallMethod.
        Dim mInfo As MethodInfo = clsType.GetMethod("Win32CallMethod")
        If Not (mInfo Is Nothing) Then
            ' Iterate through all the attributes of the method.
            Dim attr As Attribute
            For Each attr In  Attribute.GetCustomAttributes(mInfo)
                ' Check for the Obsolete attribute.
                If attr.GetType().Equals(GetType(ObsoleteAttribute)) Then
                    Console.WriteLine("Method {0} is obsolete. The message is:", mInfo.Name)
                    Console.WriteLine("  ""{0}""", CType(attr, ObsoleteAttribute).Message)
                ' Check for the Unmanaged attribute.
                ElseIf attr.GetType().Equals(GetType(UnmanagedAttribute)) Then
                    Console.WriteLine("This method calls unmanaged code.")
                    Console.WriteLine( _
                            String.Format("The Unmanaged attribute type is {0}.", _
                            CType(attr, UnmanagedAttribute).Win32Type))
                    Dim myCls As New AClass()
                    myCls.Win32CallMethod()
                End If
            Next attr
        End If
    End Sub
End Class

'
'This code example produces the following results. 
'
'First, the compilation yields the warning, "... This method is 
'obsolete. Use managed MsgBox instead."
'Second, execution yields a message box with a title of "Caution!" 
'and message text of "This is an unmanaged call." 
'Third, the following text is displayed in the console window:
'
'Method Win32CallMethod is obsolete. The message is:
'  "This method is obsolete. Use managed MsgBox instead."
'This method calls unmanaged code.
'The Unmanaged attribute type is User.
'

Начиная с .NET Framework версии 2.0 этот метод возвращает атрибуты безопасности для методов, конструкторов и типов, если атрибуты хранятся в новом формате метаданных. Сборки, скомпилированные с версией 2.0 или более поздней, используют новый формат. Динамические сборки и сборки, скомпилированные с более ранними версиями .NET Framework, используют старый формат XML. См. раздел выдачи декларативных атрибутов безопасности.

Применяется к

GetCustomAttributes(ParameterInfo, Type, Boolean)

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Извлекает массив настраиваемых атрибутов, применяемых к параметру метода. Параметры указывают параметр метода, тип настраиваемого атрибута для поиска и поиск предков параметра метода.

public:
 static cli::array <Attribute ^> ^ GetCustomAttributes(System::Reflection::ParameterInfo ^ element, Type ^ attributeType, bool inherit);

public static Attribute[] GetCustomAttributes (System.Reflection.ParameterInfo element, Type attributeType, bool inherit);

static member GetCustomAttributes : System.Reflection.ParameterInfo * Type * bool -> Attribute[]

Public Shared Function GetCustomAttributes (element As ParameterInfo, attributeType As Type, inherit As Boolean) As Attribute()

Параметры

element: ParameterInfo

Объект, производный от класса ParameterInfo, описывающего параметр члена класса.

attributeType: Type

Тип или базовый тип настраиваемого атрибута для поиска.

inherit: Boolean

Если true, то указывает также поиск предков element для пользовательских атрибутов.

Возвращаемое значение

Attribute[]

Массив Attribute, содержащий настраиваемые атрибуты типа attributeType применены к element, или пустой массив, если такие настраиваемые атрибуты отсутствуют.

Исключения

ArgumentNullException

element или attributeTypenull.

ArgumentException

attributeType не является производным от Attribute.

TypeLoadException

Не удается загрузить пользовательский тип атрибута.

Примеры

В следующем примере кода показано использование GetCustomAttributes, принимая ParameterInfo в качестве параметра.

using namespace System;
using namespace System::Reflection;
using namespace System::ComponentModel;

namespace CustAttrs5CS
{
   public ref class AClass
   {
   public:
      void ParamArrayAndDesc(
         // Add ParamArray and Description attributes.
         [Description("This argument is a ParamArray")]
         array<Int32>^args )
      {}
   };

   ref class DemoClass
   {
   public:
      static void Main()
      {
         // Get the Class type to access its metadata.
         Type^ clsType = AClass::typeid;

         // Get the type information for the method.
         MethodInfo^ mInfo = clsType->GetMethod( "ParamArrayAndDesc" );
         if ( mInfo != nullptr )
         {
            // Get the parameter information.
            array<ParameterInfo^>^pInfo = mInfo->GetParameters();
            if ( pInfo != nullptr )
            {
               // Iterate through all the attributes for the parameter.
               System::Collections::IEnumerator^ myEnum4 = Attribute::GetCustomAttributes( pInfo[ 0 ] )->GetEnumerator();
               while ( myEnum4->MoveNext() )
               {
                  Attribute^ attr = safe_cast<Attribute^>(myEnum4->Current);

                  // Check for the ParamArray attribute.
                  if ( attr->GetType() == ParamArrayAttribute::typeid )
                                    Console::WriteLine( "Parameter {0} for method {1} "
                  "has the ParamArray attribute.", pInfo[ 0 ]->Name, mInfo->Name );
                  // Check for the Description attribute.
                  else

                  // Check for the Description attribute.
                  if ( attr->GetType() == DescriptionAttribute::typeid )
                  {
                     Console::WriteLine( "Parameter {0} for method {1} "
                     "has a description attribute.", pInfo[ 0 ]->Name, mInfo->Name );
                     Console::WriteLine( "The description is: \"{0}\"", (dynamic_cast<DescriptionAttribute^>(attr))->Description );
                  }
               }
            }
         }
      }
   };
}

/*
 * Output:
 * Parameter args for method ParamArrayAndDesc has the ParamArray attribute.
 * Parameter args for method ParamArrayAndDesc has a description attribute.
 * The description is: "This argument is a ParamArray"
 */

using System;
using System.Reflection;
using System.ComponentModel;

namespace CustAttrs5CS {
    public class AClass {
        public void ParamArrayAndDesc(
            // Add ParamArray (with the keyword) and Description attributes.
            [Description("This argument is a ParamArray")]
            params int[] args)
        {}
    }

    class DemoClass {
        static void Main(string[] args) {
            // Get the Class type to access its metadata.
            Type clsType = typeof(AClass);
            // Get the type information for the method.
            MethodInfo mInfo = clsType.GetMethod("ParamArrayAndDesc");
            if (mInfo != null) {
                // Get the parameter information.
                ParameterInfo[] pInfo = mInfo.GetParameters();
                if (pInfo != null) {
                    // Iterate through all the attributes for the parameter.
                    foreach(Attribute attr in
                        Attribute.GetCustomAttributes(pInfo[0])) {
                        // Check for the ParamArray attribute.
                        if (attr.GetType() == typeof(ParamArrayAttribute))
                            Console.WriteLine("Parameter {0} for method {1} " +
                                "has the ParamArray attribute.",
                                pInfo[0].Name, mInfo.Name);
                        // Check for the Description attribute.
                        else if (attr.GetType() ==
                            typeof(DescriptionAttribute)) {
                            Console.WriteLine("Parameter {0} for method {1} " +
                                "has a description attribute.",
                                pInfo[0].Name, mInfo.Name);
                            Console.WriteLine("The description is: \"{0}\"",
                                ((DescriptionAttribute)attr).Description);
                        }
                    }
                }
            }
        }
    }
}

/*
 * Output:
 * Parameter args for method ParamArrayAndDesc has the ParamArray attribute.
 * Parameter args for method ParamArrayAndDesc has a description attribute.
 * The description is: "This argument is a ParamArray"
 */

open System
open System.Reflection
open System.ComponentModel

type AClass() =
    member _.ParamArrayAndDesc(
        // Add ParamArray and Description attributes.
        [<Description "This argument is a ParamArray">]
        [<ParamArray>]
        args: int[]) = ()

// Get the Class type to access its metadata.
let clsType = typeof<AClass>

// Get the type information for the method.
let mInfo = clsType.GetMethod "ParamArrayAndDesc"
if mInfo <> null then
    // Get the parameter information.
    let pInfo = mInfo.GetParameters()
    if pInfo <> null then
        // Iterate through all the attributes for the parameter.
        for attr in Attribute.GetCustomAttributes pInfo[0] do
            match attr with 
            // Check for the ParamArray attribute.
            | :? ParamArrayAttribute ->
                printfn $"Parameter {pInfo[0].Name} for method {mInfo.Name} has the ParamArray attribute."
                                
            // Check for the Description attribute.
            | :? DescriptionAttribute as attr ->
                printfn $"Parameter {pInfo[0].Name} for method {mInfo.Name} has a description attribute."
                printfn $"The description is: \"{attr.Description}\""
            | _ -> ()

// Output:
// Parameter args for method ParamArrayAndDesc has a description attribute.
// The description is: "This argument is a ParamArray"
// Parameter args for method ParamArrayAndDesc has the ParamArray attribute.

Imports System.Reflection
Imports System.ComponentModel

Module DemoModule
    Public Class AClass
        ' Add Description and ParamArray (with the keyword) attributes.
        Public Sub ParamArrayAndDesc( _
            <Description("This argument is a ParamArray")> _
            ByVal ParamArray args() As Integer)
        End Sub
    End Class

    Sub Main()
        ' Get the Class type to access its metadata.
        Dim clsType As Type = GetType(AClass)
        ' Get the type information for the method.
        Dim mInfo As MethodInfo = clsType.GetMethod("ParamArrayAndDesc")
        ' Get the Parameter information for the method.
        Dim pInfo() As ParameterInfo = mInfo.GetParameters()
        Dim attr As Attribute
        ' Iterate through each attribute of the parameter.
        For Each attr In Attribute.GetCustomAttributes(pInfo(0))
            ' Check for the ParamArray attribute.
            If TypeOf attr Is ParamArrayAttribute Then
                ' Convert the attribute to access its data.
                Dim paAttr As ParamArrayAttribute = _
                    CType(attr, ParamArrayAttribute)
                Console.WriteLine("Parameter {0} for method {1} has the " + _
                    "ParamArray attribute.", pInfo(0).Name, mInfo.Name)
            ' Check for the Description attribute.
            ElseIf TypeOf attr Is DescriptionAttribute Then
                ' Convert the attribute to access its data.
                Dim descAttr As DescriptionAttribute = _
                    CType(attr, DescriptionAttribute)
                Console.WriteLine("Parameter {0} for method {1} has a description " + _
                    "attribute. The description is:", pInfo(0).Name, mInfo.Name)
                Console.WriteLine(descAttr.Description)
            End If
        Next
    End Sub
End Module

' Output:
' Parameter args for method ParamArrayAndDesc has the ParamArray attribute.
' Parameter args for method ParamArrayAndDesc has a description attribute. The description is:
' This argument is a ParamArray

Применяется к

GetCustomAttributes(Module, Type, Boolean)

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Извлекает массив настраиваемых атрибутов, применяемых к модулю. Параметры указывают модуль, тип настраиваемого атрибута для поиска и игнорируемый параметр поиска.

public:
 static cli::array <Attribute ^> ^ GetCustomAttributes(System::Reflection::Module ^ element, Type ^ attributeType, bool inherit);

public static Attribute[] GetCustomAttributes (System.Reflection.Module element, Type attributeType, bool inherit);

static member GetCustomAttributes : System.Reflection.Module * Type * bool -> Attribute[]

Public Shared Function GetCustomAttributes (element As Module, attributeType As Type, inherit As Boolean) As Attribute()

Параметры

element: Module

Объект, производный от класса Module, описывающего переносимый исполняемый файл.

attributeType: Type

Тип или базовый тип настраиваемого атрибута для поиска.

inherit: Boolean

Этот параметр игнорируется и не влияет на работу этого метода.

Возвращаемое значение

Attribute[]

Исключения

ArgumentNullException

element или attributeTypenull.

ArgumentException

attributeType не является производным от Attribute.

Примеры

В следующем примере кода показано использование GetCustomAttributes, принимая Module в качестве параметра.

using namespace System;
using namespace System::Reflection;
using namespace System::ComponentModel;

// Assign some attributes to the module.
// Set the module's CLSCompliant attribute to false
// The CLSCompliant attribute is applicable for /target:module.
[module:Description("A sample description")];
[module:CLSCompliant(false)];
namespace CustAttrs2CS
{
   ref class DemoClass
   {
   public:
      static void Main()
      {
         Type^ clsType = DemoClass::typeid;

         // Get the Module type to access its metadata.
         Module^ module = clsType->Module;

         // Iterate through all the attributes for the module.
         System::Collections::IEnumerator^ myEnum1 = Attribute::GetCustomAttributes( module )->GetEnumerator();
         while ( myEnum1->MoveNext() )
         {
            Attribute^ attr = safe_cast<Attribute^>(myEnum1->Current);

            // Check for the Description attribute.
            if ( attr->GetType() == DescriptionAttribute::typeid )
                        Console::WriteLine( "Module {0} has the description \"{1}\".", module->Name, (dynamic_cast<DescriptionAttribute^>(attr))->Description );
            // Check for the CLSCompliant attribute.
            else

            // Check for the CLSCompliant attribute.
            if ( attr->GetType() == CLSCompliantAttribute::typeid )
                        Console::WriteLine( "Module {0} {1} CLSCompliant.", module->Name, (dynamic_cast<CLSCompliantAttribute^>(attr))->IsCompliant ? (String^)"is" : "is not" );
         }
      }
   };
}


/*
 * Output:
 * Module CustAttrs2CS.exe is not CLSCompliant.
 * Module CustAttrs2CS.exe has the description "A sample description".
 */

using System;
using System.Reflection;
using System.ComponentModel;

// Assign some attributes to the module.
[module:Description("A sample description")]

// Set the module's CLSCompliant attribute to false
// The CLSCompliant attribute is applicable for /target:module.
[module:CLSCompliant(false)]

namespace CustAttrs2CS {
    class DemoClass {
        static void Main(string[] args) {
            Type clsType = typeof(DemoClass);
            // Get the Module type to access its metadata.
            Module module = clsType.Module;

            // Iterate through all the attributes for the module.
            foreach(Attribute attr in Attribute.GetCustomAttributes(module)) {
                // Check for the Description attribute.
                if (attr.GetType() == typeof(DescriptionAttribute))
                    Console.WriteLine("Module {0} has the description " +
                        "\"{1}\".", module.Name,
                        ((DescriptionAttribute)attr).Description);
                // Check for the CLSCompliant attribute.
                else if (attr.GetType() == typeof(CLSCompliantAttribute))
                    Console.WriteLine("Module {0} {1} CLSCompliant.",
                        module.Name,
                        ((CLSCompliantAttribute)attr).IsCompliant ?
                            "is" : "is not");
            }
        }
    }
}

/*
 * Output:
 * Module CustAttrs2CS.exe is not CLSCompliant.
 * Module CustAttrs2CS.exe has the description "A sample description".
 */

open System
open System.ComponentModel

// Assign some attributes to the module.
[<``module``: Description "A sample description">]

// Set the module's CLSCompliant attribute to false
// The CLSCompliant attribute is applicable for /target:module.
[<``module``: CLSCompliant false>]
do ()

type DemoClass = class end

// Get the Module type to access its metadata.
let ilmodule = typeof<DemoClass>.Module

// Iterate through all the attributes for the module.
for attr in Attribute.GetCustomAttributes ilmodule do
    match attr with
    // Check for the Description attribute.
    | :? DescriptionAttribute as attr ->
        printfn $"Module {ilmodule.Name} has the description \"{attr.Description}\"."
                
    // Check for the CLSCompliant attribute.
    | :? CLSCompliantAttribute as attr ->
        printfn $"""Module {ilmodule.Name} {if attr.IsCompliant then "is" else "is not"} CLSCompliant."""
    | _ -> ()
    
// Output:
// Module CustAttrs2CS.exe is not CLSCompliant.
// Module CustAttrs2CS.exe has the description "A sample description".

Imports System.Reflection
Imports System.ComponentModel

' Give the Module some attributes.
<Module: Description("A sample description")> 

' Make the CLSCompliant attribute False.
' The CLSCompliant attribute is applicable for /target:module.
<Module: CLSCompliant(False)> 

Module DemoModule

    Sub Main()
        ' Get the Module type to access its metadata.
        Dim modType As Reflection.Module = GetType(DemoModule).Module
        Dim attr As Attribute
        ' Iterate through all the attributes for the module.
        For Each attr In Attribute.GetCustomAttributes(modType)
            ' Check for the Description attribute.
            If TypeOf attr Is DescriptionAttribute Then
                ' Convert the attribute to access its data.
                Dim descAttr As DescriptionAttribute = _
                    CType(attr, DescriptionAttribute)
                Console.WriteLine("Module {0} has the description ""{1}"".", _
                    modType.Name, descAttr.Description)

            ' Check for the CLSCompliant attribute.
            ElseIf TypeOf attr Is CLSCompliantAttribute Then
                ' Convert the attribute to access its data.
                Dim CLSCompAttr As CLSCompliantAttribute = _
                    CType(attr, CLSCompliantAttribute)
                Dim strCompliant As String
                If CLSCompAttr.IsCompliant Then
                    strCompliant = "is"
                Else
                    strCompliant = "is not"
                End If
                Console.WriteLine("Module {0} {1} CLSCompliant.", _
                    modType.Name, strCompliant)
            End If
        Next
    End Sub
End Module

' Output:
' Module CustAttrs2VB.exe has the description "A sample description".
' Module CustAttrs2VB.exe is not CLSCompliant.

Применяется к

GetCustomAttributes(MemberInfo, Type)

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Извлекает массив настраиваемых атрибутов, применяемых к элементу типа. Параметры указывают элемент и тип настраиваемого атрибута для поиска.

public:
 static cli::array <Attribute ^> ^ GetCustomAttributes(System::Reflection::MemberInfo ^ element, Type ^ type);

public:
 static cli::array <Attribute ^> ^ GetCustomAttributes(System::Reflection::MemberInfo ^ element, Type ^ attributeType);

public static Attribute[] GetCustomAttributes (System.Reflection.MemberInfo element, Type type);

public static Attribute[] GetCustomAttributes (System.Reflection.MemberInfo element, Type attributeType);

static member GetCustomAttributes : System.Reflection.MemberInfo * Type -> Attribute[]

static member GetCustomAttributes : System.Reflection.MemberInfo * Type -> Attribute[]

Public Shared Function GetCustomAttributes (element As MemberInfo, type As Type) As Attribute()

Public Shared Function GetCustomAttributes (element As MemberInfo, attributeType As Type) As Attribute()

Параметры

element: MemberInfo

typeattributeType: Type

Тип или базовый тип настраиваемого атрибута для поиска.

Возвращаемое значение

Attribute[]

Исключения

ArgumentNullException

element или typenull.

ArgumentException

type не является производным от Attribute.

NotSupportedException

element не является конструктором, методом, свойством, событием, типом или полем.

TypeLoadException

Не удается загрузить пользовательский тип атрибута.

Примеры

В следующем примере кода показано использование GetCustomAttribute, принимая MemberInfo в качестве параметра.

using namespace System;
using namespace System::Reflection;
using namespace System::Security;
using namespace System::Runtime::InteropServices;

namespace CustAttrs4CS
{
   // Create a class for Win32 imported unmanaged functions.
   public ref class Win32
   {
   public:

      [DllImport("user32.dll", CharSet = CharSet::Unicode)]
      static int MessageBox( int hWnd, String^ text, String^ caption, UInt32 type );
   };

   public ref class AClass
   {
   public:

      // Add some attributes to the Win32CallMethod.

      [Obsolete("This method is obsolete. Use managed MsgBox instead.")]
      void Win32CallMethod()
      {
         Win32::MessageBox( 0, "This is an unmanaged call.", "Be Careful!", 0 );
      }

   };

   ref class DemoClass
   {
   public:
      static void Main()
      {
         // Get the Class type to access its metadata.
         Type^ clsType = AClass::typeid;

         // Get the type information for the Win32CallMethod.
         MethodInfo^ mInfo = clsType->GetMethod( "Win32CallMethod" );
         if ( mInfo != nullptr )
         {
            // Iterate through all the attributes for the method.
            System::Collections::IEnumerator^ myEnum3 = Attribute::GetCustomAttributes( mInfo )->GetEnumerator();
            while ( myEnum3->MoveNext() )
            {
               Attribute^ attr = safe_cast<Attribute^>(myEnum3->Current);

               // Check for the Obsolete attribute.
               if ( attr->GetType() == ObsoleteAttribute::typeid )
               {
                  Console::WriteLine( "Method {0} is obsolete. "
                  "The message is:", mInfo->Name );
                  Console::WriteLine( (dynamic_cast<ObsoleteAttribute^>(attr))->Message );
               }
               // Check for the SuppressUnmanagedCodeSecurity attribute.
               else

               // Check for the SuppressUnmanagedCodeSecurity attribute.
               if ( attr->GetType() == SuppressUnmanagedCodeSecurityAttribute::typeid )
               {
                  Console::WriteLine( "This method calls unmanaged code "
                  "with no security check." );
                  Console::WriteLine( "Please do not use unless absolutely necessary." );
                  AClass^ myCls = gcnew AClass;
                  myCls->Win32CallMethod();
               }
            }
         }
      }
   };
}


/*
 * Output:
 * Method Win32CallMethod is obsolete. The message is:
 * This method is obsolete. Use managed MsgBox instead.
 * This method calls unmanaged code with no security check.
 * Please do not use unless absolutely necessary.
 */

using System;
using System.Reflection;
using System.Security;
using System.Runtime.InteropServices;

namespace CustAttrs4CS
{

    // Define an enumeration of Win32 unmanaged types
    public enum UnmanagedType
    {
        User,
        GDI,
        Kernel,
        Shell,
        Networking,
        Multimedia
    }

    // Define the Unmanaged attribute.
    public class UnmanagedAttribute : Attribute
    {
        // Storage for the UnmanagedType value.
        protected UnmanagedType thisType;

        // Set the unmanaged type in the constructor.
        public UnmanagedAttribute(UnmanagedType type)
        {
            thisType = type;
        }

        // Define a property to get and set the UnmanagedType value.
        public UnmanagedType Win32Type
        {
            get { return thisType; }
            set { thisType = Win32Type; }
        }
    }

    // Create a class for an imported Win32 unmanaged function.
    public class Win32 {
        [DllImport("user32.dll", CharSet = CharSet.Unicode)]
        public static extern int MessageBox(int hWnd, String text,
            String caption, uint type);
    }

    public class AClass {
        // Add some attributes to Win32CallMethod.
        [Obsolete("This method is obsolete. Use managed MsgBox instead.")]
        [Unmanaged(UnmanagedType.User)]
        public void Win32CallMethod()
        {
            Win32.MessageBox(0, "This is an unmanaged call.", "Caution!", 0);
        }
    }

    class DemoClass {
        static void Main(string[] args)
            {
            // Get the AClass type to access its metadata.
            Type clsType = typeof(AClass);
            // Get the type information for Win32CallMethod.
            MethodInfo mInfo = clsType.GetMethod("Win32CallMethod");
            if (mInfo != null)
            {
                // Iterate through all the attributes of the method.
                foreach(Attribute attr in
                    Attribute.GetCustomAttributes(mInfo)) {
                    // Check for the Obsolete attribute.
                    if (attr.GetType() == typeof(ObsoleteAttribute))
                    {
                        Console.WriteLine("Method {0} is obsolete. " +
                            "The message is:",
                            mInfo.Name);
                        Console.WriteLine("  \"{0}\"",
                            ((ObsoleteAttribute)attr).Message);
                    }

                    // Check for the Unmanaged attribute.
                    else if (attr.GetType() == typeof(UnmanagedAttribute))
                    {
                        Console.WriteLine(
                            "This method calls unmanaged code.");
                        Console.WriteLine(
                            String.Format("The Unmanaged attribute type is {0}.",
                                          ((UnmanagedAttribute)attr).Win32Type));
                        AClass myCls = new AClass();
                        myCls.Win32CallMethod();
                    }
                }
            }
        }
    }
}

/*

This code example produces the following results.

First, the compilation yields the warning, "... This method is
obsolete. Use managed MsgBox instead."
Second, execution yields a message box with a title of "Caution!"
and message text of "This is an unmanaged call."
Third, the following text is displayed in the console window:

Method Win32CallMethod is obsolete. The message is:
  "This method is obsolete. Use managed MsgBox instead."
This method calls unmanaged code.
The Unmanaged attribute type is User.

*/

open System
open System.Runtime.InteropServices

// Define an enumeration of Win32 unmanaged types
type UnmanagedType =
    | User = 0
    | GDI = 1
    | Kernel = 2
    | Shell = 3
    | Networking = 4
    | Multimedia = 5

// Define the Unmanaged attribute.
type UnmanagedAttribute(unmanagedType) =
    inherit Attribute()
    
    // Define a property to get and set the UnmanagedType value.
    member val Win32Type = unmanagedType with get, set

// Create a module for an imported Win32 unmanaged function.
module Win32 =
    [<DllImport("user32.dll", CharSet = CharSet.Unicode)>]
    extern int MessageBox(IntPtr hWnd, String text, String caption, uint ``type``)

type AClass() =
    // Add some attributes to Win32CallMethod.
    [<Obsolete "This method is obsolete. Use managed MsgBox instead.">]
    [<Unmanaged(UnmanagedType.User)>]
    member _.Win32CallMethod () =
        Win32.MessageBox(0, "This is an unmanaged call.", "Caution!", 0u)

// Get the AClass type to access its metadata.
let clsType = typeof<AClass>
// Get the type information for Win32CallMethod.
let mInfo = clsType.GetMethod "Win32CallMethod"
if mInfo <> null then
    // Iterate through all the attributes of the method.
    for attr in Attribute.GetCustomAttributes mInfo do
        match attr with 
        // Check for the Obsolete attribute.
        | :? ObsoleteAttribute as attr ->
            printfn $"Method {mInfo.Name} is obsolete. The message is:"
            printfn $"  \"{attr.Message}\""

        // Check for the Unmanaged attribute.
        | :? UnmanagedAttribute as attr ->
            printfn "This method calls unmanaged code."
            printfn $"The Unmanaged attribute type is {attr.Win32Type}."
            let myCls = AClass()
            myCls.Win32CallMethod() |> ignore
        | _ -> ()

// This code example produces the following results.
//
// First, the compilation yields the warning, "... This method is
// obsolete. Use managed MsgBox instead."
// Second, execution yields a message box with a title of "Caution!"
// and message text of "This is an unmanaged call."
// Third, the following text is displayed in the console window:

// Method Win32CallMethod is obsolete. The message is:
//   "This method is obsolete. Use managed MsgBox instead."
// This method calls unmanaged code.
// The Unmanaged attribute type is User.

Imports System.Reflection
Imports System.Security
Imports System.Runtime.InteropServices

' Define an enumeration of Win32 unmanaged types
Public Enum UnmanagedType
    User
    GDI
    Kernel
    Shell
    Networking
    Multimedia
End Enum 'UnmanagedType

' Define the Unmanaged attribute.
Public Class UnmanagedAttribute 
             Inherits Attribute

    ' Storage for the UnmanagedType value.
    Protected thisType As UnmanagedType
    
    ' Set the unmanaged type in the constructor.
    Public Sub New(ByVal type As UnmanagedType) 
        thisType = type
    End Sub
    
    ' Define a property to get and set the UnmanagedType value.
    Public Property Win32Type() As UnmanagedType 
        Get
            Return thisType
        End Get
        Set
            thisType = Win32Type
        End Set
    End Property
End Class

' Create a class for an imported Win32 unmanaged function.
Public Class Win32
    <DllImport("user32.dll", CharSet:=CharSet.Unicode)> _
    Public Shared Function MessageBox(ByVal hWnd As Integer, _
                                      ByVal Text As String, _
                                      ByVal caption As String, _
                                      ByVal type As Integer) As Integer
    End Function 'MessageBox
End Class

Public Class AClass
    ' Add some attributes to Win32CallMethod.
    <Obsolete("This method is obsolete. Use managed MsgBox instead."), _
     Unmanaged(UnmanagedType.User)>  _
    Public Sub Win32CallMethod() 
        Win32.MessageBox(0, "This is an unmanaged call.", "Caution!", 0)    
    End Sub
End Class

Class DemoClass
    Shared Sub Main(ByVal args() As String) 
        ' Get the AClass type to access its metadata.
        Dim clsType As Type = GetType(AClass)
        ' Get the type information for Win32CallMethod.
        Dim mInfo As MethodInfo = clsType.GetMethod("Win32CallMethod")
        If Not (mInfo Is Nothing) Then
            ' Iterate through all the attributes of the method.
            Dim attr As Attribute
            For Each attr In  Attribute.GetCustomAttributes(mInfo)
                ' Check for the Obsolete attribute.
                If attr.GetType().Equals(GetType(ObsoleteAttribute)) Then
                    Console.WriteLine("Method {0} is obsolete. The message is:", mInfo.Name)
                    Console.WriteLine("  ""{0}""", CType(attr, ObsoleteAttribute).Message)
                ' Check for the Unmanaged attribute.
                ElseIf attr.GetType().Equals(GetType(UnmanagedAttribute)) Then
                    Console.WriteLine("This method calls unmanaged code.")
                    Console.WriteLine( _
                            String.Format("The Unmanaged attribute type is {0}.", _
                            CType(attr, UnmanagedAttribute).Win32Type))
                    Dim myCls As New AClass()
                    myCls.Win32CallMethod()
                End If
            Next attr
        End If
    End Sub
End Class

'
'This code example produces the following results. 
'
'First, the compilation yields the warning, "... This method is 
'obsolete. Use managed MsgBox instead."
'Second, execution yields a message box with a title of "Caution!" 
'and message text of "This is an unmanaged call." 
'Third, the following text is displayed in the console window:
'
'Method Win32CallMethod is obsolete. The message is:
'  "This method is obsolete. Use managed MsgBox instead."
'This method calls unmanaged code.
'The Unmanaged attribute type is User.
'

Применяется к

GetCustomAttributes(Assembly, Type, Boolean)

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Извлекает массив настраиваемых атрибутов, применяемых к сборке. Параметры указывают сборку, тип настраиваемого атрибута для поиска и игнорируемый параметр поиска.

public:
 static cli::array <Attribute ^> ^ GetCustomAttributes(System::Reflection::Assembly ^ element, Type ^ attributeType, bool inherit);

public static Attribute[] GetCustomAttributes (System.Reflection.Assembly element, Type attributeType, bool inherit);

static member GetCustomAttributes : System.Reflection.Assembly * Type * bool -> Attribute[]

Public Shared Function GetCustomAttributes (element As Assembly, attributeType As Type, inherit As Boolean) As Attribute()

Параметры

element: Assembly

Объект, производный от класса Assembly, описывающего повторно используемый набор модулей.

attributeType: Type

Тип или базовый тип настраиваемого атрибута для поиска.

inherit: Boolean

Этот параметр игнорируется и не влияет на работу этого метода.

Возвращаемое значение

Attribute[]

Исключения

ArgumentNullException

element или attributeTypenull.

ArgumentException

attributeType не является производным от Attribute.

Примеры

В следующем примере кода показано использование GetCustomAttributes, принимая Assembly в качестве параметра.

using namespace System;
using namespace System::Reflection;

[assembly:AssemblyTitle("CustAttrs1CPP")];
[assembly:AssemblyDescription("GetCustomAttributes() Demo")];
[assembly:AssemblyCompany("Microsoft")];

ref class Example
{};

static void main()
{
    Type^ clsType = Example::typeid;

    // Get the Assembly type to access its metadata.
    Assembly^ assy = clsType->Assembly;

    // Iterate through the attributes for the assembly.
    System::Collections::IEnumerator^ myEnum = Attribute::GetCustomAttributes( assy )->GetEnumerator();
    while ( myEnum->MoveNext() )
    {
       Attribute^ attr = safe_cast<Attribute^>(myEnum->Current);

       // Check for the AssemblyTitle attribute.
       if ( attr->GetType() == AssemblyTitleAttribute::typeid )
          Console::WriteLine( "Assembly title is \"{0}\".", (dynamic_cast<AssemblyTitleAttribute^>(attr))->Title );
          // Check for the AssemblyDescription attribute.
       else
          // Check for the AssemblyDescription attribute.
          if ( attr->GetType() == AssemblyDescriptionAttribute::typeid )
             Console::WriteLine( "Assembly description is \"{0}\".", (dynamic_cast<AssemblyDescriptionAttribute^>(attr))->Description );
          // Check for the AssemblyCompany attribute.
          else if ( attr->GetType() == AssemblyCompanyAttribute::typeid )
             Console::WriteLine( "Assembly company is {0}.", (dynamic_cast<AssemblyCompanyAttribute^>(attr))->Company );
    }
}
// The example displays the following output:
//     Assembly description is "GetCustomAttributes() Demo".
//     Assembly company is Microsoft.
//     Assembly title is "CustAttrs1CPP".

using System;
using System.Reflection;

[assembly: AssemblyTitle("CustAttrs1CS")]
[assembly: AssemblyDescription("GetCustomAttributes() Demo")]
[assembly: AssemblyCompany("Microsoft")]

class Example {
    static void Main() {
        // Get the Assembly object to access its metadata.
        Assembly assy = typeof(Example).Assembly;

        // Iterate through the attributes for the assembly.
        foreach(Attribute attr in Attribute.GetCustomAttributes(assy)) {
            // Check for the AssemblyTitle attribute.
            if (attr.GetType() == typeof(AssemblyTitleAttribute))
                Console.WriteLine("Assembly title is \"{0}\".",
                    ((AssemblyTitleAttribute)attr).Title);

            // Check for the AssemblyDescription attribute.
            else if (attr.GetType() ==
                typeof(AssemblyDescriptionAttribute))
                Console.WriteLine("Assembly description is \"{0}\".",
                    ((AssemblyDescriptionAttribute)attr).Description);

            // Check for the AssemblyCompany attribute.
            else if (attr.GetType() == typeof(AssemblyCompanyAttribute))
                Console.WriteLine("Assembly company is {0}.",
                    ((AssemblyCompanyAttribute)attr).Company);
        }
   }
}
// The example displays the following output:
//     Assembly title is "CustAttrs1CS".
//     Assembly description is "GetCustomAttributes() Demo".
//     Assembly company is Microsoft.

open System
open System.Reflection

[<assembly: AssemblyTitle "CustAttrs1CS">]
[<assembly: AssemblyDescription "GetCustomAttributes() Demo">]
[<assembly: AssemblyCompany"Microsoft">]
do ()

type Example = class end

// Get the Assembly object to access its metadata.
let assembly = typeof<Example>.Assembly

// Iterate through the attributes for the assembly.
for attr in Attribute.GetCustomAttributes assembly do
    match attr with
    // Check for the AssemblyTitle attribute.
    | :? AssemblyTitleAttribute as attr ->    
        printfn $"Assembly title is \"{attr.Title}\"."
    // Check for the AssemblyDescription attribute.
    | :? AssemblyDescriptionAttribute as attr ->
        printfn $"Assembly description is \"{attr.Description}\"."
    // Check for the AssemblyCompany attribute.
    | :? AssemblyCompanyAttribute as attr ->
        printfn $"Assembly company is {attr.Company}."
    | _ -> ()
    
// The example displays the following output:
//     Assembly title is "CustAttrs1CS".
//     Assembly description is "GetCustomAttributes() Demo".
//     Assembly company is Microsoft.

Imports System.Reflection

<Assembly: AssemblyTitle("CustAttrs1VB")> 
<Assembly: AssemblyDescription("GetCustomAttributes() Demo")> 
<Assembly: AssemblyCompany("Microsoft")> 

Module Example
    Sub Main()
        ' Get the Assembly type to access its metadata.
        Dim assy As Reflection.Assembly = GetType(Example).Assembly

        ' Iterate through all the attributes for the assembly.
        For Each attr As Attribute In Attribute.GetCustomAttributes(assy)
            ' Check for the AssemblyTitle attribute.
            If TypeOf attr Is AssemblyTitleAttribute Then
                ' Convert the attribute to access its data.
                Dim attrTitle As AssemblyTitleAttribute = _
                    CType(attr, AssemblyTitleAttribute)
                Console.WriteLine("Assembly title is ""{0}"".", _
                    attrTitle.Title)

            ' Check for the AssemblyDescription attribute.
            ElseIf TypeOf attr Is AssemblyDescriptionAttribute Then
                ' Convert the attribute to access its data.
                Dim attrDesc As AssemblyDescriptionAttribute = _
                    CType(attr, AssemblyDescriptionAttribute)
                Console.WriteLine("Assembly description is ""{0}"".", _
                    attrDesc.Description)

            ' Check for the AssemblyCompany attribute.
            ElseIf TypeOf attr Is AssemblyCompanyAttribute Then
                ' Convert the attribute to access its data.
                Dim attrComp As AssemblyCompanyAttribute = _
                    CType(attr, AssemblyCompanyAttribute)
                Console.WriteLine("Assembly company is {0}.", _
                    attrComp.Company)
            End If
        Next
    End Sub
End Module
' The example displays the following output:
'     Assembly company is Microsoft.
'     Assembly description is "GetCustomAttributes() Demo".
'     Assembly title is "CustAttrs1VB".

Начиная с .NET Framework версии 2.0 этот метод возвращает атрибуты безопасности, если атрибуты хранятся в новом формате метаданных. Сборки, скомпилированные с версией 2.0 или более поздней, используют новый формат. Динамические сборки и сборки, скомпилированные с более ранними версиями .NET Framework, используют старый формат XML. См. раздел выдачи декларативных атрибутов безопасности.

Применяется к

GetCustomAttributes(Module, Type)

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Извлекает массив настраиваемых атрибутов, применяемых к модулю. Параметры указывают модуль и тип настраиваемого атрибута для поиска.

public:
 static cli::array <Attribute ^> ^ GetCustomAttributes(System::Reflection::Module ^ element, Type ^ attributeType);

public static Attribute[] GetCustomAttributes (System.Reflection.Module element, Type attributeType);

static member GetCustomAttributes : System.Reflection.Module * Type -> Attribute[]

Public Shared Function GetCustomAttributes (element As Module, attributeType As Type) As Attribute()

Параметры

element: Module

Объект, производный от класса Module, описывающего переносимый исполняемый файл.

attributeType: Type

Тип или базовый тип настраиваемого атрибута для поиска.

Возвращаемое значение

Attribute[]

Исключения

ArgumentNullException

element или attributeTypenull.

ArgumentException

attributeType не является производным от Attribute.

Примеры

В следующем примере кода показано использование GetCustomAttributes, принимая Module в качестве параметра.

using namespace System;
using namespace System::Reflection;
using namespace System::ComponentModel;

// Assign some attributes to the module.
// Set the module's CLSCompliant attribute to false
// The CLSCompliant attribute is applicable for /target:module.
[module:Description("A sample description")];
[module:CLSCompliant(false)];
namespace CustAttrs2CS
{
   ref class DemoClass
   {
   public:
      static void Main()
      {
         Type^ clsType = DemoClass::typeid;

         // Get the Module type to access its metadata.
         Module^ module = clsType->Module;

         // Iterate through all the attributes for the module.
         System::Collections::IEnumerator^ myEnum1 = Attribute::GetCustomAttributes( module )->GetEnumerator();
         while ( myEnum1->MoveNext() )
         {
            Attribute^ attr = safe_cast<Attribute^>(myEnum1->Current);

            // Check for the Description attribute.
            if ( attr->GetType() == DescriptionAttribute::typeid )
                        Console::WriteLine( "Module {0} has the description \"{1}\".", module->Name, (dynamic_cast<DescriptionAttribute^>(attr))->Description );
            // Check for the CLSCompliant attribute.
            else

            // Check for the CLSCompliant attribute.
            if ( attr->GetType() == CLSCompliantAttribute::typeid )
                        Console::WriteLine( "Module {0} {1} CLSCompliant.", module->Name, (dynamic_cast<CLSCompliantAttribute^>(attr))->IsCompliant ? (String^)"is" : "is not" );
         }
      }
   };
}


/*
 * Output:
 * Module CustAttrs2CS.exe is not CLSCompliant.
 * Module CustAttrs2CS.exe has the description "A sample description".
 */

using System;
using System.Reflection;
using System.ComponentModel;

// Assign some attributes to the module.
[module:Description("A sample description")]

// Set the module's CLSCompliant attribute to false
// The CLSCompliant attribute is applicable for /target:module.
[module:CLSCompliant(false)]

namespace CustAttrs2CS {
    class DemoClass {
        static void Main(string[] args) {
            Type clsType = typeof(DemoClass);
            // Get the Module type to access its metadata.
            Module module = clsType.Module;

            // Iterate through all the attributes for the module.
            foreach(Attribute attr in Attribute.GetCustomAttributes(module)) {
                // Check for the Description attribute.
                if (attr.GetType() == typeof(DescriptionAttribute))
                    Console.WriteLine("Module {0} has the description " +
                        "\"{1}\".", module.Name,
                        ((DescriptionAttribute)attr).Description);
                // Check for the CLSCompliant attribute.
                else if (attr.GetType() == typeof(CLSCompliantAttribute))
                    Console.WriteLine("Module {0} {1} CLSCompliant.",
                        module.Name,
                        ((CLSCompliantAttribute)attr).IsCompliant ?
                            "is" : "is not");
            }
        }
    }
}

/*
 * Output:
 * Module CustAttrs2CS.exe is not CLSCompliant.
 * Module CustAttrs2CS.exe has the description "A sample description".
 */

open System
open System.ComponentModel

// Assign some attributes to the module.
[<``module``: Description "A sample description">]

// Set the module's CLSCompliant attribute to false
// The CLSCompliant attribute is applicable for /target:module.
[<``module``: CLSCompliant false>]
do ()

type DemoClass = class end

// Get the Module type to access its metadata.
let ilmodule = typeof<DemoClass>.Module

// Iterate through all the attributes for the module.
for attr in Attribute.GetCustomAttributes ilmodule do
    match attr with
    // Check for the Description attribute.
    | :? DescriptionAttribute as attr ->
        printfn $"Module {ilmodule.Name} has the description \"{attr.Description}\"."
                
    // Check for the CLSCompliant attribute.
    | :? CLSCompliantAttribute as attr ->
        printfn $"""Module {ilmodule.Name} {if attr.IsCompliant then "is" else "is not"} CLSCompliant."""
    | _ -> ()
    
// Output:
// Module CustAttrs2CS.exe is not CLSCompliant.
// Module CustAttrs2CS.exe has the description "A sample description".

Imports System.Reflection
Imports System.ComponentModel

' Give the Module some attributes.
<Module: Description("A sample description")> 

' Make the CLSCompliant attribute False.
' The CLSCompliant attribute is applicable for /target:module.
<Module: CLSCompliant(False)> 

Module DemoModule

    Sub Main()
        ' Get the Module type to access its metadata.
        Dim modType As Reflection.Module = GetType(DemoModule).Module
        Dim attr As Attribute
        ' Iterate through all the attributes for the module.
        For Each attr In Attribute.GetCustomAttributes(modType)
            ' Check for the Description attribute.
            If TypeOf attr Is DescriptionAttribute Then
                ' Convert the attribute to access its data.
                Dim descAttr As DescriptionAttribute = _
                    CType(attr, DescriptionAttribute)
                Console.WriteLine("Module {0} has the description ""{1}"".", _
                    modType.Name, descAttr.Description)

            ' Check for the CLSCompliant attribute.
            ElseIf TypeOf attr Is CLSCompliantAttribute Then
                ' Convert the attribute to access its data.
                Dim CLSCompAttr As CLSCompliantAttribute = _
                    CType(attr, CLSCompliantAttribute)
                Dim strCompliant As String
                If CLSCompAttr.IsCompliant Then
                    strCompliant = "is"
                Else
                    strCompliant = "is not"
                End If
                Console.WriteLine("Module {0} {1} CLSCompliant.", _
                    modType.Name, strCompliant)
            End If
        Next
    End Sub
End Module

' Output:
' Module CustAttrs2VB.exe has the description "A sample description".
' Module CustAttrs2VB.exe is not CLSCompliant.

Применяется к

GetCustomAttributes(ParameterInfo, Type)

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Извлекает массив настраиваемых атрибутов, применяемых к параметру метода. Параметры указывают параметр метода и тип настраиваемого атрибута для поиска.

public:
 static cli::array <Attribute ^> ^ GetCustomAttributes(System::Reflection::ParameterInfo ^ element, Type ^ attributeType);

public static Attribute[] GetCustomAttributes (System.Reflection.ParameterInfo element, Type attributeType);

static member GetCustomAttributes : System.Reflection.ParameterInfo * Type -> Attribute[]

Public Shared Function GetCustomAttributes (element As ParameterInfo, attributeType As Type) As Attribute()

Параметры

element: ParameterInfo

Объект, производный от класса ParameterInfo, описывающего параметр члена класса.

attributeType: Type

Тип или базовый тип настраиваемого атрибута для поиска.

Возвращаемое значение

Attribute[]

Исключения

ArgumentNullException

element или attributeTypenull.

ArgumentException

attributeType не является производным от Attribute.

TypeLoadException

Не удается загрузить пользовательский тип атрибута.

Примеры

В следующем примере кода показано использование GetCustomAttributes, принимая ParameterInfo в качестве параметра.

using namespace System;
using namespace System::Reflection;
using namespace System::ComponentModel;

namespace CustAttrs5CS
{
   public ref class AClass
   {
   public:
      void ParamArrayAndDesc(
         // Add ParamArray and Description attributes.
         [Description("This argument is a ParamArray")]
         array<Int32>^args )
      {}
   };

   ref class DemoClass
   {
   public:
      static void Main()
      {
         // Get the Class type to access its metadata.
         Type^ clsType = AClass::typeid;

         // Get the type information for the method.
         MethodInfo^ mInfo = clsType->GetMethod( "ParamArrayAndDesc" );
         if ( mInfo != nullptr )
         {
            // Get the parameter information.
            array<ParameterInfo^>^pInfo = mInfo->GetParameters();
            if ( pInfo != nullptr )
            {
               // Iterate through all the attributes for the parameter.
               System::Collections::IEnumerator^ myEnum4 = Attribute::GetCustomAttributes( pInfo[ 0 ] )->GetEnumerator();
               while ( myEnum4->MoveNext() )
               {
                  Attribute^ attr = safe_cast<Attribute^>(myEnum4->Current);

                  // Check for the ParamArray attribute.
                  if ( attr->GetType() == ParamArrayAttribute::typeid )
                                    Console::WriteLine( "Parameter {0} for method {1} "
                  "has the ParamArray attribute.", pInfo[ 0 ]->Name, mInfo->Name );
                  // Check for the Description attribute.
                  else

                  // Check for the Description attribute.
                  if ( attr->GetType() == DescriptionAttribute::typeid )
                  {
                     Console::WriteLine( "Parameter {0} for method {1} "
                     "has a description attribute.", pInfo[ 0 ]->Name, mInfo->Name );
                     Console::WriteLine( "The description is: \"{0}\"", (dynamic_cast<DescriptionAttribute^>(attr))->Description );
                  }
               }
            }
         }
      }
   };
}

/*
 * Output:
 * Parameter args for method ParamArrayAndDesc has the ParamArray attribute.
 * Parameter args for method ParamArrayAndDesc has a description attribute.
 * The description is: "This argument is a ParamArray"
 */

using System;
using System.Reflection;
using System.ComponentModel;

namespace CustAttrs5CS {
    public class AClass {
        public void ParamArrayAndDesc(
            // Add ParamArray (with the keyword) and Description attributes.
            [Description("This argument is a ParamArray")]
            params int[] args)
        {}
    }

    class DemoClass {
        static void Main(string[] args) {
            // Get the Class type to access its metadata.
            Type clsType = typeof(AClass);
            // Get the type information for the method.
            MethodInfo mInfo = clsType.GetMethod("ParamArrayAndDesc");
            if (mInfo != null) {
                // Get the parameter information.
                ParameterInfo[] pInfo = mInfo.GetParameters();
                if (pInfo != null) {
                    // Iterate through all the attributes for the parameter.
                    foreach(Attribute attr in
                        Attribute.GetCustomAttributes(pInfo[0])) {
                        // Check for the ParamArray attribute.
                        if (attr.GetType() == typeof(ParamArrayAttribute))
                            Console.WriteLine("Parameter {0} for method {1} " +
                                "has the ParamArray attribute.",
                                pInfo[0].Name, mInfo.Name);
                        // Check for the Description attribute.
                        else if (attr.GetType() ==
                            typeof(DescriptionAttribute)) {
                            Console.WriteLine("Parameter {0} for method {1} " +
                                "has a description attribute.",
                                pInfo[0].Name, mInfo.Name);
                            Console.WriteLine("The description is: \"{0}\"",
                                ((DescriptionAttribute)attr).Description);
                        }
                    }
                }
            }
        }
    }
}

/*
 * Output:
 * Parameter args for method ParamArrayAndDesc has the ParamArray attribute.
 * Parameter args for method ParamArrayAndDesc has a description attribute.
 * The description is: "This argument is a ParamArray"
 */

open System
open System.Reflection
open System.ComponentModel

type AClass() =
    member _.ParamArrayAndDesc(
        // Add ParamArray and Description attributes.
        [<Description "This argument is a ParamArray">]
        [<ParamArray>]
        args: int[]) = ()

// Get the Class type to access its metadata.
let clsType = typeof<AClass>

// Get the type information for the method.
let mInfo = clsType.GetMethod "ParamArrayAndDesc"
if mInfo <> null then
    // Get the parameter information.
    let pInfo = mInfo.GetParameters()
    if pInfo <> null then
        // Iterate through all the attributes for the parameter.
        for attr in Attribute.GetCustomAttributes pInfo[0] do
            match attr with 
            // Check for the ParamArray attribute.
            | :? ParamArrayAttribute ->
                printfn $"Parameter {pInfo[0].Name} for method {mInfo.Name} has the ParamArray attribute."
                                
            // Check for the Description attribute.
            | :? DescriptionAttribute as attr ->
                printfn $"Parameter {pInfo[0].Name} for method {mInfo.Name} has a description attribute."
                printfn $"The description is: \"{attr.Description}\""
            | _ -> ()

// Output:
// Parameter args for method ParamArrayAndDesc has a description attribute.
// The description is: "This argument is a ParamArray"
// Parameter args for method ParamArrayAndDesc has the ParamArray attribute.

Imports System.Reflection
Imports System.ComponentModel

Module DemoModule
    Public Class AClass
        ' Add Description and ParamArray (with the keyword) attributes.
        Public Sub ParamArrayAndDesc( _
            <Description("This argument is a ParamArray")> _
            ByVal ParamArray args() As Integer)
        End Sub
    End Class

    Sub Main()
        ' Get the Class type to access its metadata.
        Dim clsType As Type = GetType(AClass)
        ' Get the type information for the method.
        Dim mInfo As MethodInfo = clsType.GetMethod("ParamArrayAndDesc")
        ' Get the Parameter information for the method.
        Dim pInfo() As ParameterInfo = mInfo.GetParameters()
        Dim attr As Attribute
        ' Iterate through each attribute of the parameter.
        For Each attr In Attribute.GetCustomAttributes(pInfo(0))
            ' Check for the ParamArray attribute.
            If TypeOf attr Is ParamArrayAttribute Then
                ' Convert the attribute to access its data.
                Dim paAttr As ParamArrayAttribute = _
                    CType(attr, ParamArrayAttribute)
                Console.WriteLine("Parameter {0} for method {1} has the " + _
                    "ParamArray attribute.", pInfo(0).Name, mInfo.Name)
            ' Check for the Description attribute.
            ElseIf TypeOf attr Is DescriptionAttribute Then
                ' Convert the attribute to access its data.
                Dim descAttr As DescriptionAttribute = _
                    CType(attr, DescriptionAttribute)
                Console.WriteLine("Parameter {0} for method {1} has a description " + _
                    "attribute. The description is:", pInfo(0).Name, mInfo.Name)
                Console.WriteLine(descAttr.Description)
            End If
        Next
    End Sub
End Module

' Output:
' Parameter args for method ParamArrayAndDesc has the ParamArray attribute.
' Parameter args for method ParamArrayAndDesc has a description attribute. The description is:
' This argument is a ParamArray

Применяется к

GetCustomAttributes(MemberInfo, Boolean)

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

public:
 static cli::array <Attribute ^> ^ GetCustomAttributes(System::Reflection::MemberInfo ^ element, bool inherit);

public static Attribute[] GetCustomAttributes (System.Reflection.MemberInfo element, bool inherit);

static member GetCustomAttributes : System.Reflection.MemberInfo * bool -> Attribute[]

Public Shared Function GetCustomAttributes (element As MemberInfo, inherit As Boolean) As Attribute()

Параметры

element: MemberInfo

inherit: Boolean

Если true, то указывает также поиск предков element для пользовательских атрибутов.

Возвращаемое значение

Attribute[]

Исключения

ArgumentNullException

element null.

NotSupportedException

element не является конструктором, методом, свойством, событием, типом или полем.

TypeLoadException

Не удается загрузить пользовательский тип атрибута.

Примеры

В следующем примере кода показано использование GetCustomAttributes, принимая MemberInfo в качестве параметра.

using namespace System;
using namespace System::Reflection;
using namespace System::Security;
using namespace System::Runtime::InteropServices;

namespace CustAttrs4CS
{
   // Create a class for Win32 imported unmanaged functions.
   public ref class Win32
   {
   public:

      [DllImport("user32.dll", CharSet = CharSet::Unicode)]
      static int MessageBox( int hWnd, String^ text, String^ caption, UInt32 type );
   };

   public ref class AClass
   {
   public:

      // Add some attributes to the Win32CallMethod.

      [Obsolete("This method is obsolete. Use managed MsgBox instead.")]
      void Win32CallMethod()
      {
         Win32::MessageBox( 0, "This is an unmanaged call.", "Be Careful!", 0 );
      }

   };

   ref class DemoClass
   {
   public:
      static void Main()
      {
         // Get the Class type to access its metadata.
         Type^ clsType = AClass::typeid;

         // Get the type information for the Win32CallMethod.
         MethodInfo^ mInfo = clsType->GetMethod( "Win32CallMethod" );
         if ( mInfo != nullptr )
         {
            // Iterate through all the attributes for the method.
            System::Collections::IEnumerator^ myEnum3 = Attribute::GetCustomAttributes( mInfo )->GetEnumerator();
            while ( myEnum3->MoveNext() )
            {
               Attribute^ attr = safe_cast<Attribute^>(myEnum3->Current);

               // Check for the Obsolete attribute.
               if ( attr->GetType() == ObsoleteAttribute::typeid )
               {
                  Console::WriteLine( "Method {0} is obsolete. "
                  "The message is:", mInfo->Name );
                  Console::WriteLine( (dynamic_cast<ObsoleteAttribute^>(attr))->Message );
               }
               // Check for the SuppressUnmanagedCodeSecurity attribute.
               else

               // Check for the SuppressUnmanagedCodeSecurity attribute.
               if ( attr->GetType() == SuppressUnmanagedCodeSecurityAttribute::typeid )
               {
                  Console::WriteLine( "This method calls unmanaged code "
                  "with no security check." );
                  Console::WriteLine( "Please do not use unless absolutely necessary." );
                  AClass^ myCls = gcnew AClass;
                  myCls->Win32CallMethod();
               }
            }
         }
      }
   };
}


/*
 * Output:
 * Method Win32CallMethod is obsolete. The message is:
 * This method is obsolete. Use managed MsgBox instead.
 * This method calls unmanaged code with no security check.
 * Please do not use unless absolutely necessary.
 */

using System;
using System.Reflection;
using System.Security;
using System.Runtime.InteropServices;

namespace CustAttrs4CS
{

    // Define an enumeration of Win32 unmanaged types
    public enum UnmanagedType
    {
        User,
        GDI,
        Kernel,
        Shell,
        Networking,
        Multimedia
    }

    // Define the Unmanaged attribute.
    public class UnmanagedAttribute : Attribute
    {
        // Storage for the UnmanagedType value.
        protected UnmanagedType thisType;

        // Set the unmanaged type in the constructor.
        public UnmanagedAttribute(UnmanagedType type)
        {
            thisType = type;
        }

        // Define a property to get and set the UnmanagedType value.
        public UnmanagedType Win32Type
        {
            get { return thisType; }
            set { thisType = Win32Type; }
        }
    }

    // Create a class for an imported Win32 unmanaged function.
    public class Win32 {
        [DllImport("user32.dll", CharSet = CharSet.Unicode)]
        public static extern int MessageBox(int hWnd, String text,
            String caption, uint type);
    }

    public class AClass {
        // Add some attributes to Win32CallMethod.
        [Obsolete("This method is obsolete. Use managed MsgBox instead.")]
        [Unmanaged(UnmanagedType.User)]
        public void Win32CallMethod()
        {
            Win32.MessageBox(0, "This is an unmanaged call.", "Caution!", 0);
        }
    }

    class DemoClass {
        static void Main(string[] args)
            {
            // Get the AClass type to access its metadata.
            Type clsType = typeof(AClass);
            // Get the type information for Win32CallMethod.
            MethodInfo mInfo = clsType.GetMethod("Win32CallMethod");
            if (mInfo != null)
            {
                // Iterate through all the attributes of the method.
                foreach(Attribute attr in
                    Attribute.GetCustomAttributes(mInfo)) {
                    // Check for the Obsolete attribute.
                    if (attr.GetType() == typeof(ObsoleteAttribute))
                    {
                        Console.WriteLine("Method {0} is obsolete. " +
                            "The message is:",
                            mInfo.Name);
                        Console.WriteLine("  \"{0}\"",
                            ((ObsoleteAttribute)attr).Message);
                    }

                    // Check for the Unmanaged attribute.
                    else if (attr.GetType() == typeof(UnmanagedAttribute))
                    {
                        Console.WriteLine(
                            "This method calls unmanaged code.");
                        Console.WriteLine(
                            String.Format("The Unmanaged attribute type is {0}.",
                                          ((UnmanagedAttribute)attr).Win32Type));
                        AClass myCls = new AClass();
                        myCls.Win32CallMethod();
                    }
                }
            }
        }
    }
}

/*

This code example produces the following results.

First, the compilation yields the warning, "... This method is
obsolete. Use managed MsgBox instead."
Second, execution yields a message box with a title of "Caution!"
and message text of "This is an unmanaged call."
Third, the following text is displayed in the console window:

Method Win32CallMethod is obsolete. The message is:
  "This method is obsolete. Use managed MsgBox instead."
This method calls unmanaged code.
The Unmanaged attribute type is User.

*/

open System
open System.Runtime.InteropServices

// Define an enumeration of Win32 unmanaged types
type UnmanagedType =
    | User = 0
    | GDI = 1
    | Kernel = 2
    | Shell = 3
    | Networking = 4
    | Multimedia = 5

// Define the Unmanaged attribute.
type UnmanagedAttribute(unmanagedType) =
    inherit Attribute()
    
    // Define a property to get and set the UnmanagedType value.
    member val Win32Type = unmanagedType with get, set

// Create a module for an imported Win32 unmanaged function.
module Win32 =
    [<DllImport("user32.dll", CharSet = CharSet.Unicode)>]
    extern int MessageBox(IntPtr hWnd, String text, String caption, uint ``type``)

type AClass() =
    // Add some attributes to Win32CallMethod.
    [<Obsolete "This method is obsolete. Use managed MsgBox instead.">]
    [<Unmanaged(UnmanagedType.User)>]
    member _.Win32CallMethod () =
        Win32.MessageBox(0, "This is an unmanaged call.", "Caution!", 0u)

// Get the AClass type to access its metadata.
let clsType = typeof<AClass>
// Get the type information for Win32CallMethod.
let mInfo = clsType.GetMethod "Win32CallMethod"
if mInfo <> null then
    // Iterate through all the attributes of the method.
    for attr in Attribute.GetCustomAttributes mInfo do
        match attr with 
        // Check for the Obsolete attribute.
        | :? ObsoleteAttribute as attr ->
            printfn $"Method {mInfo.Name} is obsolete. The message is:"
            printfn $"  \"{attr.Message}\""

        // Check for the Unmanaged attribute.
        | :? UnmanagedAttribute as attr ->
            printfn "This method calls unmanaged code."
            printfn $"The Unmanaged attribute type is {attr.Win32Type}."
            let myCls = AClass()
            myCls.Win32CallMethod() |> ignore
        | _ -> ()

// This code example produces the following results.
//
// First, the compilation yields the warning, "... This method is
// obsolete. Use managed MsgBox instead."
// Second, execution yields a message box with a title of "Caution!"
// and message text of "This is an unmanaged call."
// Third, the following text is displayed in the console window:

// Method Win32CallMethod is obsolete. The message is:
//   "This method is obsolete. Use managed MsgBox instead."
// This method calls unmanaged code.
// The Unmanaged attribute type is User.

Imports System.Reflection
Imports System.Security
Imports System.Runtime.InteropServices

' Define an enumeration of Win32 unmanaged types
Public Enum UnmanagedType
    User
    GDI
    Kernel
    Shell
    Networking
    Multimedia
End Enum 'UnmanagedType

' Define the Unmanaged attribute.
Public Class UnmanagedAttribute 
             Inherits Attribute

    ' Storage for the UnmanagedType value.
    Protected thisType As UnmanagedType
    
    ' Set the unmanaged type in the constructor.
    Public Sub New(ByVal type As UnmanagedType) 
        thisType = type
    End Sub
    
    ' Define a property to get and set the UnmanagedType value.
    Public Property Win32Type() As UnmanagedType 
        Get
            Return thisType
        End Get
        Set
            thisType = Win32Type
        End Set
    End Property
End Class

' Create a class for an imported Win32 unmanaged function.
Public Class Win32
    <DllImport("user32.dll", CharSet:=CharSet.Unicode)> _
    Public Shared Function MessageBox(ByVal hWnd As Integer, _
                                      ByVal Text As String, _
                                      ByVal caption As String, _
                                      ByVal type As Integer) As Integer
    End Function 'MessageBox
End Class

Public Class AClass
    ' Add some attributes to Win32CallMethod.
    <Obsolete("This method is obsolete. Use managed MsgBox instead."), _
     Unmanaged(UnmanagedType.User)>  _
    Public Sub Win32CallMethod() 
        Win32.MessageBox(0, "This is an unmanaged call.", "Caution!", 0)    
    End Sub
End Class

Class DemoClass
    Shared Sub Main(ByVal args() As String) 
        ' Get the AClass type to access its metadata.
        Dim clsType As Type = GetType(AClass)
        ' Get the type information for Win32CallMethod.
        Dim mInfo As MethodInfo = clsType.GetMethod("Win32CallMethod")
        If Not (mInfo Is Nothing) Then
            ' Iterate through all the attributes of the method.
            Dim attr As Attribute
            For Each attr In  Attribute.GetCustomAttributes(mInfo)
                ' Check for the Obsolete attribute.
                If attr.GetType().Equals(GetType(ObsoleteAttribute)) Then
                    Console.WriteLine("Method {0} is obsolete. The message is:", mInfo.Name)
                    Console.WriteLine("  ""{0}""", CType(attr, ObsoleteAttribute).Message)
                ' Check for the Unmanaged attribute.
                ElseIf attr.GetType().Equals(GetType(UnmanagedAttribute)) Then
                    Console.WriteLine("This method calls unmanaged code.")
                    Console.WriteLine( _
                            String.Format("The Unmanaged attribute type is {0}.", _
                            CType(attr, UnmanagedAttribute).Win32Type))
                    Dim myCls As New AClass()
                    myCls.Win32CallMethod()
                End If
            Next attr
        End If
    End Sub
End Class

'
'This code example produces the following results. 
'
'First, the compilation yields the warning, "... This method is 
'obsolete. Use managed MsgBox instead."
'Second, execution yields a message box with a title of "Caution!" 
'and message text of "This is an unmanaged call." 
'Third, the following text is displayed in the console window:
'
'Method Win32CallMethod is obsolete. The message is:
'  "This method is obsolete. Use managed MsgBox instead."
'This method calls unmanaged code.
'The Unmanaged attribute type is User.
'

Применяется к

GetCustomAttributes(Assembly, Type)

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Извлекает массив настраиваемых атрибутов, применяемых к сборке. Параметры указывают сборку и тип пользовательского атрибута для поиска.

public:
 static cli::array <Attribute ^> ^ GetCustomAttributes(System::Reflection::Assembly ^ element, Type ^ attributeType);

public static Attribute[] GetCustomAttributes (System.Reflection.Assembly element, Type attributeType);

static member GetCustomAttributes : System.Reflection.Assembly * Type -> Attribute[]

Public Shared Function GetCustomAttributes (element As Assembly, attributeType As Type) As Attribute()

Параметры

element: Assembly

Объект, производный от класса Assembly, описывающего повторно используемый набор модулей.

attributeType: Type

Тип или базовый тип настраиваемого атрибута для поиска.

Возвращаемое значение

Attribute[]

Исключения

ArgumentNullException

element или attributeTypenull.

ArgumentException

attributeType не является производным от Attribute.

Примеры

В следующем примере кода показано использование GetCustomAttributes, принимая Assembly в качестве параметра.

using namespace System;
using namespace System::Reflection;

[assembly:AssemblyTitle("CustAttrs1CPP")];
[assembly:AssemblyDescription("GetCustomAttributes() Demo")];
[assembly:AssemblyCompany("Microsoft")];

ref class Example
{};

static void main()
{
    Type^ clsType = Example::typeid;

    // Get the Assembly type to access its metadata.
    Assembly^ assy = clsType->Assembly;

    // Iterate through the attributes for the assembly.
    System::Collections::IEnumerator^ myEnum = Attribute::GetCustomAttributes( assy )->GetEnumerator();
    while ( myEnum->MoveNext() )
    {
       Attribute^ attr = safe_cast<Attribute^>(myEnum->Current);

       // Check for the AssemblyTitle attribute.
       if ( attr->GetType() == AssemblyTitleAttribute::typeid )
          Console::WriteLine( "Assembly title is \"{0}\".", (dynamic_cast<AssemblyTitleAttribute^>(attr))->Title );
          // Check for the AssemblyDescription attribute.
       else
          // Check for the AssemblyDescription attribute.
          if ( attr->GetType() == AssemblyDescriptionAttribute::typeid )
             Console::WriteLine( "Assembly description is \"{0}\".", (dynamic_cast<AssemblyDescriptionAttribute^>(attr))->Description );
          // Check for the AssemblyCompany attribute.
          else if ( attr->GetType() == AssemblyCompanyAttribute::typeid )
             Console::WriteLine( "Assembly company is {0}.", (dynamic_cast<AssemblyCompanyAttribute^>(attr))->Company );
    }
}
// The example displays the following output:
//     Assembly description is "GetCustomAttributes() Demo".
//     Assembly company is Microsoft.
//     Assembly title is "CustAttrs1CPP".

using System;
using System.Reflection;

[assembly: AssemblyTitle("CustAttrs1CS")]
[assembly: AssemblyDescription("GetCustomAttributes() Demo")]
[assembly: AssemblyCompany("Microsoft")]

class Example {
    static void Main() {
        // Get the Assembly object to access its metadata.
        Assembly assy = typeof(Example).Assembly;

        // Iterate through the attributes for the assembly.
        foreach(Attribute attr in Attribute.GetCustomAttributes(assy)) {
            // Check for the AssemblyTitle attribute.
            if (attr.GetType() == typeof(AssemblyTitleAttribute))
                Console.WriteLine("Assembly title is \"{0}\".",
                    ((AssemblyTitleAttribute)attr).Title);

            // Check for the AssemblyDescription attribute.
            else if (attr.GetType() ==
                typeof(AssemblyDescriptionAttribute))
                Console.WriteLine("Assembly description is \"{0}\".",
                    ((AssemblyDescriptionAttribute)attr).Description);

            // Check for the AssemblyCompany attribute.
            else if (attr.GetType() == typeof(AssemblyCompanyAttribute))
                Console.WriteLine("Assembly company is {0}.",
                    ((AssemblyCompanyAttribute)attr).Company);
        }
   }
}
// The example displays the following output:
//     Assembly title is "CustAttrs1CS".
//     Assembly description is "GetCustomAttributes() Demo".
//     Assembly company is Microsoft.

open System
open System.Reflection

[<assembly: AssemblyTitle "CustAttrs1CS">]
[<assembly: AssemblyDescription "GetCustomAttributes() Demo">]
[<assembly: AssemblyCompany"Microsoft">]
do ()

type Example = class end

// Get the Assembly object to access its metadata.
let assembly = typeof<Example>.Assembly

// Iterate through the attributes for the assembly.
for attr in Attribute.GetCustomAttributes assembly do
    match attr with
    // Check for the AssemblyTitle attribute.
    | :? AssemblyTitleAttribute as attr ->    
        printfn $"Assembly title is \"{attr.Title}\"."
    // Check for the AssemblyDescription attribute.
    | :? AssemblyDescriptionAttribute as attr ->
        printfn $"Assembly description is \"{attr.Description}\"."
    // Check for the AssemblyCompany attribute.
    | :? AssemblyCompanyAttribute as attr ->
        printfn $"Assembly company is {attr.Company}."
    | _ -> ()
    
// The example displays the following output:
//     Assembly title is "CustAttrs1CS".
//     Assembly description is "GetCustomAttributes() Demo".
//     Assembly company is Microsoft.

Imports System.Reflection

<Assembly: AssemblyTitle("CustAttrs1VB")> 
<Assembly: AssemblyDescription("GetCustomAttributes() Demo")> 
<Assembly: AssemblyCompany("Microsoft")> 

Module Example
    Sub Main()
        ' Get the Assembly type to access its metadata.
        Dim assy As Reflection.Assembly = GetType(Example).Assembly

        ' Iterate through all the attributes for the assembly.
        For Each attr As Attribute In Attribute.GetCustomAttributes(assy)
            ' Check for the AssemblyTitle attribute.
            If TypeOf attr Is AssemblyTitleAttribute Then
                ' Convert the attribute to access its data.
                Dim attrTitle As AssemblyTitleAttribute = _
                    CType(attr, AssemblyTitleAttribute)
                Console.WriteLine("Assembly title is ""{0}"".", _
                    attrTitle.Title)

            ' Check for the AssemblyDescription attribute.
            ElseIf TypeOf attr Is AssemblyDescriptionAttribute Then
                ' Convert the attribute to access its data.
                Dim attrDesc As AssemblyDescriptionAttribute = _
                    CType(attr, AssemblyDescriptionAttribute)
                Console.WriteLine("Assembly description is ""{0}"".", _
                    attrDesc.Description)

            ' Check for the AssemblyCompany attribute.
            ElseIf TypeOf attr Is AssemblyCompanyAttribute Then
                ' Convert the attribute to access its data.
                Dim attrComp As AssemblyCompanyAttribute = _
                    CType(attr, AssemblyCompanyAttribute)
                Console.WriteLine("Assembly company is {0}.", _
                    attrComp.Company)
            End If
        Next
    End Sub
End Module
' The example displays the following output:
'     Assembly company is Microsoft.
'     Assembly description is "GetCustomAttributes() Demo".
'     Assembly title is "CustAttrs1VB".

Применяется к

GetCustomAttributes(Assembly, Boolean)

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Извлекает массив настраиваемых атрибутов, применяемых к сборке. Параметры указывают сборку и игнорируемый параметр поиска.

public:
 static cli::array <Attribute ^> ^ GetCustomAttributes(System::Reflection::Assembly ^ element, bool inherit);

public static Attribute[] GetCustomAttributes (System.Reflection.Assembly element, bool inherit);

static member GetCustomAttributes : System.Reflection.Assembly * bool -> Attribute[]

Public Shared Function GetCustomAttributes (element As Assembly, inherit As Boolean) As Attribute()

Параметры

element: Assembly

Объект, производный от класса Assembly, описывающего повторно используемый набор модулей.

inherit: Boolean

Этот параметр игнорируется и не влияет на работу этого метода.

Возвращаемое значение

Attribute[]

Исключения

ArgumentNullException

element null.

Примеры

В следующем примере кода показано использование GetCustomAttributes, принимая Assembly в качестве параметра.

using namespace System;
using namespace System::Reflection;

[assembly:AssemblyTitle("CustAttrs1CPP")];
[assembly:AssemblyDescription("GetCustomAttributes() Demo")];
[assembly:AssemblyCompany("Microsoft")];

ref class Example
{};

static void main()
{
    Type^ clsType = Example::typeid;

    // Get the Assembly type to access its metadata.
    Assembly^ assy = clsType->Assembly;

    // Iterate through the attributes for the assembly.
    System::Collections::IEnumerator^ myEnum = Attribute::GetCustomAttributes( assy )->GetEnumerator();
    while ( myEnum->MoveNext() )
    {
       Attribute^ attr = safe_cast<Attribute^>(myEnum->Current);

       // Check for the AssemblyTitle attribute.
       if ( attr->GetType() == AssemblyTitleAttribute::typeid )
          Console::WriteLine( "Assembly title is \"{0}\".", (dynamic_cast<AssemblyTitleAttribute^>(attr))->Title );
          // Check for the AssemblyDescription attribute.
       else
          // Check for the AssemblyDescription attribute.
          if ( attr->GetType() == AssemblyDescriptionAttribute::typeid )
             Console::WriteLine( "Assembly description is \"{0}\".", (dynamic_cast<AssemblyDescriptionAttribute^>(attr))->Description );
          // Check for the AssemblyCompany attribute.
          else if ( attr->GetType() == AssemblyCompanyAttribute::typeid )
             Console::WriteLine( "Assembly company is {0}.", (dynamic_cast<AssemblyCompanyAttribute^>(attr))->Company );
    }
}
// The example displays the following output:
//     Assembly description is "GetCustomAttributes() Demo".
//     Assembly company is Microsoft.
//     Assembly title is "CustAttrs1CPP".

using System;
using System.Reflection;

[assembly: AssemblyTitle("CustAttrs1CS")]
[assembly: AssemblyDescription("GetCustomAttributes() Demo")]
[assembly: AssemblyCompany("Microsoft")]

class Example {
    static void Main() {
        // Get the Assembly object to access its metadata.
        Assembly assy = typeof(Example).Assembly;

        // Iterate through the attributes for the assembly.
        foreach(Attribute attr in Attribute.GetCustomAttributes(assy)) {
            // Check for the AssemblyTitle attribute.
            if (attr.GetType() == typeof(AssemblyTitleAttribute))
                Console.WriteLine("Assembly title is \"{0}\".",
                    ((AssemblyTitleAttribute)attr).Title);

            // Check for the AssemblyDescription attribute.
            else if (attr.GetType() ==
                typeof(AssemblyDescriptionAttribute))
                Console.WriteLine("Assembly description is \"{0}\".",
                    ((AssemblyDescriptionAttribute)attr).Description);

            // Check for the AssemblyCompany attribute.
            else if (attr.GetType() == typeof(AssemblyCompanyAttribute))
                Console.WriteLine("Assembly company is {0}.",
                    ((AssemblyCompanyAttribute)attr).Company);
        }
   }
}
// The example displays the following output:
//     Assembly title is "CustAttrs1CS".
//     Assembly description is "GetCustomAttributes() Demo".
//     Assembly company is Microsoft.

open System
open System.Reflection

[<assembly: AssemblyTitle "CustAttrs1CS">]
[<assembly: AssemblyDescription "GetCustomAttributes() Demo">]
[<assembly: AssemblyCompany"Microsoft">]
do ()

type Example = class end

// Get the Assembly object to access its metadata.
let assembly = typeof<Example>.Assembly

// Iterate through the attributes for the assembly.
for attr in Attribute.GetCustomAttributes assembly do
    match attr with
    // Check for the AssemblyTitle attribute.
    | :? AssemblyTitleAttribute as attr ->    
        printfn $"Assembly title is \"{attr.Title}\"."
    // Check for the AssemblyDescription attribute.
    | :? AssemblyDescriptionAttribute as attr ->
        printfn $"Assembly description is \"{attr.Description}\"."
    // Check for the AssemblyCompany attribute.
    | :? AssemblyCompanyAttribute as attr ->
        printfn $"Assembly company is {attr.Company}."
    | _ -> ()
    
// The example displays the following output:
//     Assembly title is "CustAttrs1CS".
//     Assembly description is "GetCustomAttributes() Demo".
//     Assembly company is Microsoft.

Imports System.Reflection

<Assembly: AssemblyTitle("CustAttrs1VB")> 
<Assembly: AssemblyDescription("GetCustomAttributes() Demo")> 
<Assembly: AssemblyCompany("Microsoft")> 

Module Example
    Sub Main()
        ' Get the Assembly type to access its metadata.
        Dim assy As Reflection.Assembly = GetType(Example).Assembly

        ' Iterate through all the attributes for the assembly.
        For Each attr As Attribute In Attribute.GetCustomAttributes(assy)
            ' Check for the AssemblyTitle attribute.
            If TypeOf attr Is AssemblyTitleAttribute Then
                ' Convert the attribute to access its data.
                Dim attrTitle As AssemblyTitleAttribute = _
                    CType(attr, AssemblyTitleAttribute)
                Console.WriteLine("Assembly title is ""{0}"".", _
                    attrTitle.Title)

            ' Check for the AssemblyDescription attribute.
            ElseIf TypeOf attr Is AssemblyDescriptionAttribute Then
                ' Convert the attribute to access its data.
                Dim attrDesc As AssemblyDescriptionAttribute = _
                    CType(attr, AssemblyDescriptionAttribute)
                Console.WriteLine("Assembly description is ""{0}"".", _
                    attrDesc.Description)

            ' Check for the AssemblyCompany attribute.
            ElseIf TypeOf attr Is AssemblyCompanyAttribute Then
                ' Convert the attribute to access its data.
                Dim attrComp As AssemblyCompanyAttribute = _
                    CType(attr, AssemblyCompanyAttribute)
                Console.WriteLine("Assembly company is {0}.", _
                    attrComp.Company)
            End If
        Next
    End Sub
End Module
' The example displays the following output:
'     Assembly company is Microsoft.
'     Assembly description is "GetCustomAttributes() Demo".
'     Assembly title is "CustAttrs1VB".

Применяется к

GetCustomAttributes(ParameterInfo)

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Извлекает массив настраиваемых атрибутов, применяемых к параметру метода. Параметр задает параметр метода.

public:
 static cli::array <Attribute ^> ^ GetCustomAttributes(System::Reflection::ParameterInfo ^ element);

public static Attribute[] GetCustomAttributes (System.Reflection.ParameterInfo element);

static member GetCustomAttributes : System.Reflection.ParameterInfo -> Attribute[]

Public Shared Function GetCustomAttributes (element As ParameterInfo) As Attribute()

Параметры

element: ParameterInfo

Объект, производный от класса ParameterInfo, описывающего параметр члена класса.

Возвращаемое значение

Attribute[]

Исключения

ArgumentNullException

element null.

TypeLoadException

Не удается загрузить пользовательский тип атрибута.

Примеры

В следующем примере кода показано использование GetCustomAttributes, принимая ParameterInfo в качестве параметра.

using namespace System;
using namespace System::Reflection;
using namespace System::ComponentModel;

namespace CustAttrs5CS
{
   public ref class AClass
   {
   public:
      void ParamArrayAndDesc(
         // Add ParamArray and Description attributes.
         [Description("This argument is a ParamArray")]
         array<Int32>^args )
      {}
   };

   ref class DemoClass
   {
   public:
      static void Main()
      {
         // Get the Class type to access its metadata.
         Type^ clsType = AClass::typeid;

         // Get the type information for the method.
         MethodInfo^ mInfo = clsType->GetMethod( "ParamArrayAndDesc" );
         if ( mInfo != nullptr )
         {
            // Get the parameter information.
            array<ParameterInfo^>^pInfo = mInfo->GetParameters();
            if ( pInfo != nullptr )
            {
               // Iterate through all the attributes for the parameter.
               System::Collections::IEnumerator^ myEnum4 = Attribute::GetCustomAttributes( pInfo[ 0 ] )->GetEnumerator();
               while ( myEnum4->MoveNext() )
               {
                  Attribute^ attr = safe_cast<Attribute^>(myEnum4->Current);

                  // Check for the ParamArray attribute.
                  if ( attr->GetType() == ParamArrayAttribute::typeid )
                                    Console::WriteLine( "Parameter {0} for method {1} "
                  "has the ParamArray attribute.", pInfo[ 0 ]->Name, mInfo->Name );
                  // Check for the Description attribute.
                  else

                  // Check for the Description attribute.
                  if ( attr->GetType() == DescriptionAttribute::typeid )
                  {
                     Console::WriteLine( "Parameter {0} for method {1} "
                     "has a description attribute.", pInfo[ 0 ]->Name, mInfo->Name );
                     Console::WriteLine( "The description is: \"{0}\"", (dynamic_cast<DescriptionAttribute^>(attr))->Description );
                  }
               }
            }
         }
      }
   };
}

/*
 * Output:
 * Parameter args for method ParamArrayAndDesc has the ParamArray attribute.
 * Parameter args for method ParamArrayAndDesc has a description attribute.
 * The description is: "This argument is a ParamArray"
 */

using System;
using System.Reflection;
using System.ComponentModel;

namespace CustAttrs5CS {
    public class AClass {
        public void ParamArrayAndDesc(
            // Add ParamArray (with the keyword) and Description attributes.
            [Description("This argument is a ParamArray")]
            params int[] args)
        {}
    }

    class DemoClass {
        static void Main(string[] args) {
            // Get the Class type to access its metadata.
            Type clsType = typeof(AClass);
            // Get the type information for the method.
            MethodInfo mInfo = clsType.GetMethod("ParamArrayAndDesc");
            if (mInfo != null) {
                // Get the parameter information.
                ParameterInfo[] pInfo = mInfo.GetParameters();
                if (pInfo != null) {
                    // Iterate through all the attributes for the parameter.
                    foreach(Attribute attr in
                        Attribute.GetCustomAttributes(pInfo[0])) {
                        // Check for the ParamArray attribute.
                        if (attr.GetType() == typeof(ParamArrayAttribute))
                            Console.WriteLine("Parameter {0} for method {1} " +
                                "has the ParamArray attribute.",
                                pInfo[0].Name, mInfo.Name);
                        // Check for the Description attribute.
                        else if (attr.GetType() ==
                            typeof(DescriptionAttribute)) {
                            Console.WriteLine("Parameter {0} for method {1} " +
                                "has a description attribute.",
                                pInfo[0].Name, mInfo.Name);
                            Console.WriteLine("The description is: \"{0}\"",
                                ((DescriptionAttribute)attr).Description);
                        }
                    }
                }
            }
        }
    }
}

/*
 * Output:
 * Parameter args for method ParamArrayAndDesc has the ParamArray attribute.
 * Parameter args for method ParamArrayAndDesc has a description attribute.
 * The description is: "This argument is a ParamArray"
 */

open System
open System.Reflection
open System.ComponentModel

type AClass() =
    member _.ParamArrayAndDesc(
        // Add ParamArray and Description attributes.
        [<Description "This argument is a ParamArray">]
        [<ParamArray>]
        args: int[]) = ()

// Get the Class type to access its metadata.
let clsType = typeof<AClass>

// Get the type information for the method.
let mInfo = clsType.GetMethod "ParamArrayAndDesc"
if mInfo <> null then
    // Get the parameter information.
    let pInfo = mInfo.GetParameters()
    if pInfo <> null then
        // Iterate through all the attributes for the parameter.
        for attr in Attribute.GetCustomAttributes pInfo[0] do
            match attr with 
            // Check for the ParamArray attribute.
            | :? ParamArrayAttribute ->
                printfn $"Parameter {pInfo[0].Name} for method {mInfo.Name} has the ParamArray attribute."
                                
            // Check for the Description attribute.
            | :? DescriptionAttribute as attr ->
                printfn $"Parameter {pInfo[0].Name} for method {mInfo.Name} has a description attribute."
                printfn $"The description is: \"{attr.Description}\""
            | _ -> ()

// Output:
// Parameter args for method ParamArrayAndDesc has a description attribute.
// The description is: "This argument is a ParamArray"
// Parameter args for method ParamArrayAndDesc has the ParamArray attribute.

Imports System.Reflection
Imports System.ComponentModel

Module DemoModule
    Public Class AClass
        ' Add Description and ParamArray (with the keyword) attributes.
        Public Sub ParamArrayAndDesc( _
            <Description("This argument is a ParamArray")> _
            ByVal ParamArray args() As Integer)
        End Sub
    End Class

    Sub Main()
        ' Get the Class type to access its metadata.
        Dim clsType As Type = GetType(AClass)
        ' Get the type information for the method.
        Dim mInfo As MethodInfo = clsType.GetMethod("ParamArrayAndDesc")
        ' Get the Parameter information for the method.
        Dim pInfo() As ParameterInfo = mInfo.GetParameters()
        Dim attr As Attribute
        ' Iterate through each attribute of the parameter.
        For Each attr In Attribute.GetCustomAttributes(pInfo(0))
            ' Check for the ParamArray attribute.
            If TypeOf attr Is ParamArrayAttribute Then
                ' Convert the attribute to access its data.
                Dim paAttr As ParamArrayAttribute = _
                    CType(attr, ParamArrayAttribute)
                Console.WriteLine("Parameter {0} for method {1} has the " + _
                    "ParamArray attribute.", pInfo(0).Name, mInfo.Name)
            ' Check for the Description attribute.
            ElseIf TypeOf attr Is DescriptionAttribute Then
                ' Convert the attribute to access its data.
                Dim descAttr As DescriptionAttribute = _
                    CType(attr, DescriptionAttribute)
                Console.WriteLine("Parameter {0} for method {1} has a description " + _
                    "attribute. The description is:", pInfo(0).Name, mInfo.Name)
                Console.WriteLine(descAttr.Description)
            End If
        Next
    End Sub
End Module

' Output:
' Parameter args for method ParamArrayAndDesc has the ParamArray attribute.
' Parameter args for method ParamArrayAndDesc has a description attribute. The description is:
' This argument is a ParamArray

Применяется к

GetCustomAttributes(Module)

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Извлекает массив настраиваемых атрибутов, применяемых к модулю. Параметр задает модуль.

public:
 static cli::array <Attribute ^> ^ GetCustomAttributes(System::Reflection::Module ^ element);

public static Attribute[] GetCustomAttributes (System.Reflection.Module element);

static member GetCustomAttributes : System.Reflection.Module -> Attribute[]

Public Shared Function GetCustomAttributes (element As Module) As Attribute()

Параметры

element: Module

Объект, производный от класса Module, описывающего переносимый исполняемый файл.

Возвращаемое значение

Attribute[]

Исключения

ArgumentNullException

element null.

Примеры

В следующем примере кода показано использование GetCustomAttributes, принимая Module в качестве параметра.

using namespace System;
using namespace System::Reflection;
using namespace System::ComponentModel;

// Assign some attributes to the module.
// Set the module's CLSCompliant attribute to false
// The CLSCompliant attribute is applicable for /target:module.
[module:Description("A sample description")];
[module:CLSCompliant(false)];
namespace CustAttrs2CS
{
   ref class DemoClass
   {
   public:
      static void Main()
      {
         Type^ clsType = DemoClass::typeid;

         // Get the Module type to access its metadata.
         Module^ module = clsType->Module;

         // Iterate through all the attributes for the module.
         System::Collections::IEnumerator^ myEnum1 = Attribute::GetCustomAttributes( module )->GetEnumerator();
         while ( myEnum1->MoveNext() )
         {
            Attribute^ attr = safe_cast<Attribute^>(myEnum1->Current);

            // Check for the Description attribute.
            if ( attr->GetType() == DescriptionAttribute::typeid )
                        Console::WriteLine( "Module {0} has the description \"{1}\".", module->Name, (dynamic_cast<DescriptionAttribute^>(attr))->Description );
            // Check for the CLSCompliant attribute.
            else

            // Check for the CLSCompliant attribute.
            if ( attr->GetType() == CLSCompliantAttribute::typeid )
                        Console::WriteLine( "Module {0} {1} CLSCompliant.", module->Name, (dynamic_cast<CLSCompliantAttribute^>(attr))->IsCompliant ? (String^)"is" : "is not" );
         }
      }
   };
}


/*
 * Output:
 * Module CustAttrs2CS.exe is not CLSCompliant.
 * Module CustAttrs2CS.exe has the description "A sample description".
 */

using System;
using System.Reflection;
using System.ComponentModel;

// Assign some attributes to the module.
[module:Description("A sample description")]

// Set the module's CLSCompliant attribute to false
// The CLSCompliant attribute is applicable for /target:module.
[module:CLSCompliant(false)]

namespace CustAttrs2CS {
    class DemoClass {
        static void Main(string[] args) {
            Type clsType = typeof(DemoClass);
            // Get the Module type to access its metadata.
            Module module = clsType.Module;

            // Iterate through all the attributes for the module.
            foreach(Attribute attr in Attribute.GetCustomAttributes(module)) {
                // Check for the Description attribute.
                if (attr.GetType() == typeof(DescriptionAttribute))
                    Console.WriteLine("Module {0} has the description " +
                        "\"{1}\".", module.Name,
                        ((DescriptionAttribute)attr).Description);
                // Check for the CLSCompliant attribute.
                else if (attr.GetType() == typeof(CLSCompliantAttribute))
                    Console.WriteLine("Module {0} {1} CLSCompliant.",
                        module.Name,
                        ((CLSCompliantAttribute)attr).IsCompliant ?
                            "is" : "is not");
            }
        }
    }
}

/*
 * Output:
 * Module CustAttrs2CS.exe is not CLSCompliant.
 * Module CustAttrs2CS.exe has the description "A sample description".
 */

open System
open System.ComponentModel

// Assign some attributes to the module.
[<``module``: Description "A sample description">]

// Set the module's CLSCompliant attribute to false
// The CLSCompliant attribute is applicable for /target:module.
[<``module``: CLSCompliant false>]
do ()

type DemoClass = class end

// Get the Module type to access its metadata.
let ilmodule = typeof<DemoClass>.Module

// Iterate through all the attributes for the module.
for attr in Attribute.GetCustomAttributes ilmodule do
    match attr with
    // Check for the Description attribute.
    | :? DescriptionAttribute as attr ->
        printfn $"Module {ilmodule.Name} has the description \"{attr.Description}\"."
                
    // Check for the CLSCompliant attribute.
    | :? CLSCompliantAttribute as attr ->
        printfn $"""Module {ilmodule.Name} {if attr.IsCompliant then "is" else "is not"} CLSCompliant."""
    | _ -> ()
    
// Output:
// Module CustAttrs2CS.exe is not CLSCompliant.
// Module CustAttrs2CS.exe has the description "A sample description".

Imports System.Reflection
Imports System.ComponentModel

' Give the Module some attributes.
<Module: Description("A sample description")> 

' Make the CLSCompliant attribute False.
' The CLSCompliant attribute is applicable for /target:module.
<Module: CLSCompliant(False)> 

Module DemoModule

    Sub Main()
        ' Get the Module type to access its metadata.
        Dim modType As Reflection.Module = GetType(DemoModule).Module
        Dim attr As Attribute
        ' Iterate through all the attributes for the module.
        For Each attr In Attribute.GetCustomAttributes(modType)
            ' Check for the Description attribute.
            If TypeOf attr Is DescriptionAttribute Then
                ' Convert the attribute to access its data.
                Dim descAttr As DescriptionAttribute = _
                    CType(attr, DescriptionAttribute)
                Console.WriteLine("Module {0} has the description ""{1}"".", _
                    modType.Name, descAttr.Description)

            ' Check for the CLSCompliant attribute.
            ElseIf TypeOf attr Is CLSCompliantAttribute Then
                ' Convert the attribute to access its data.
                Dim CLSCompAttr As CLSCompliantAttribute = _
                    CType(attr, CLSCompliantAttribute)
                Dim strCompliant As String
                If CLSCompAttr.IsCompliant Then
                    strCompliant = "is"
                Else
                    strCompliant = "is not"
                End If
                Console.WriteLine("Module {0} {1} CLSCompliant.", _
                    modType.Name, strCompliant)
            End If
        Next
    End Sub
End Module

' Output:
' Module CustAttrs2VB.exe has the description "A sample description".
' Module CustAttrs2VB.exe is not CLSCompliant.

Применяется к

GetCustomAttributes(MemberInfo)

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Извлекает массив настраиваемых атрибутов, применяемых к элементу типа. Параметр задает элемент.

public:
 static cli::array <Attribute ^> ^ GetCustomAttributes(System::Reflection::MemberInfo ^ element);

public static Attribute[] GetCustomAttributes (System.Reflection.MemberInfo element);

static member GetCustomAttributes : System.Reflection.MemberInfo -> Attribute[]

Public Shared Function GetCustomAttributes (element As MemberInfo) As Attribute()

Параметры

element: MemberInfo

Возвращаемое значение

Attribute[]

Исключения

ArgumentNullException

element null.

NotSupportedException

element не является конструктором, методом, свойством, событием, типом или полем.

TypeLoadException

Не удается загрузить пользовательский тип атрибута.

Примеры

В следующем примере кода показано использование GetCustomAttribute, принимая MemberInfo в качестве параметра.

using namespace System;
using namespace System::Reflection;
using namespace System::Security;
using namespace System::Runtime::InteropServices;

namespace CustAttrs4CS
{
   // Create a class for Win32 imported unmanaged functions.
   public ref class Win32
   {
   public:

      [DllImport("user32.dll", CharSet = CharSet::Unicode)]
      static int MessageBox( int hWnd, String^ text, String^ caption, UInt32 type );
   };

   public ref class AClass
   {
   public:

      // Add some attributes to the Win32CallMethod.

      [Obsolete("This method is obsolete. Use managed MsgBox instead.")]
      void Win32CallMethod()
      {
         Win32::MessageBox( 0, "This is an unmanaged call.", "Be Careful!", 0 );
      }

   };

   ref class DemoClass
   {
   public:
      static void Main()
      {
         // Get the Class type to access its metadata.
         Type^ clsType = AClass::typeid;

         // Get the type information for the Win32CallMethod.
         MethodInfo^ mInfo = clsType->GetMethod( "Win32CallMethod" );
         if ( mInfo != nullptr )
         {
            // Iterate through all the attributes for the method.
            System::Collections::IEnumerator^ myEnum3 = Attribute::GetCustomAttributes( mInfo )->GetEnumerator();
            while ( myEnum3->MoveNext() )
            {
               Attribute^ attr = safe_cast<Attribute^>(myEnum3->Current);

               // Check for the Obsolete attribute.
               if ( attr->GetType() == ObsoleteAttribute::typeid )
               {
                  Console::WriteLine( "Method {0} is obsolete. "
                  "The message is:", mInfo->Name );
                  Console::WriteLine( (dynamic_cast<ObsoleteAttribute^>(attr))->Message );
               }
               // Check for the SuppressUnmanagedCodeSecurity attribute.
               else

               // Check for the SuppressUnmanagedCodeSecurity attribute.
               if ( attr->GetType() == SuppressUnmanagedCodeSecurityAttribute::typeid )
               {
                  Console::WriteLine( "This method calls unmanaged code "
                  "with no security check." );
                  Console::WriteLine( "Please do not use unless absolutely necessary." );
                  AClass^ myCls = gcnew AClass;
                  myCls->Win32CallMethod();
               }
            }
         }
      }
   };
}


/*
 * Output:
 * Method Win32CallMethod is obsolete. The message is:
 * This method is obsolete. Use managed MsgBox instead.
 * This method calls unmanaged code with no security check.
 * Please do not use unless absolutely necessary.
 */

using System;
using System.Reflection;
using System.Security;
using System.Runtime.InteropServices;

namespace CustAttrs4CS
{

    // Define an enumeration of Win32 unmanaged types
    public enum UnmanagedType
    {
        User,
        GDI,
        Kernel,
        Shell,
        Networking,
        Multimedia
    }

    // Define the Unmanaged attribute.
    public class UnmanagedAttribute : Attribute
    {
        // Storage for the UnmanagedType value.
        protected UnmanagedType thisType;

        // Set the unmanaged type in the constructor.
        public UnmanagedAttribute(UnmanagedType type)
        {
            thisType = type;
        }

        // Define a property to get and set the UnmanagedType value.
        public UnmanagedType Win32Type
        {
            get { return thisType; }
            set { thisType = Win32Type; }
        }
    }

    // Create a class for an imported Win32 unmanaged function.
    public class Win32 {
        [DllImport("user32.dll", CharSet = CharSet.Unicode)]
        public static extern int MessageBox(int hWnd, String text,
            String caption, uint type);
    }

    public class AClass {
        // Add some attributes to Win32CallMethod.
        [Obsolete("This method is obsolete. Use managed MsgBox instead.")]
        [Unmanaged(UnmanagedType.User)]
        public void Win32CallMethod()
        {
            Win32.MessageBox(0, "This is an unmanaged call.", "Caution!", 0);
        }
    }

    class DemoClass {
        static void Main(string[] args)
            {
            // Get the AClass type to access its metadata.
            Type clsType = typeof(AClass);
            // Get the type information for Win32CallMethod.
            MethodInfo mInfo = clsType.GetMethod("Win32CallMethod");
            if (mInfo != null)
            {
                // Iterate through all the attributes of the method.
                foreach(Attribute attr in
                    Attribute.GetCustomAttributes(mInfo)) {
                    // Check for the Obsolete attribute.
                    if (attr.GetType() == typeof(ObsoleteAttribute))
                    {
                        Console.WriteLine("Method {0} is obsolete. " +
                            "The message is:",
                            mInfo.Name);
                        Console.WriteLine("  \"{0}\"",
                            ((ObsoleteAttribute)attr).Message);
                    }

                    // Check for the Unmanaged attribute.
                    else if (attr.GetType() == typeof(UnmanagedAttribute))
                    {
                        Console.WriteLine(
                            "This method calls unmanaged code.");
                        Console.WriteLine(
                            String.Format("The Unmanaged attribute type is {0}.",
                                          ((UnmanagedAttribute)attr).Win32Type));
                        AClass myCls = new AClass();
                        myCls.Win32CallMethod();
                    }
                }
            }
        }
    }
}

/*

This code example produces the following results.

First, the compilation yields the warning, "... This method is
obsolete. Use managed MsgBox instead."
Second, execution yields a message box with a title of "Caution!"
and message text of "This is an unmanaged call."
Third, the following text is displayed in the console window:

Method Win32CallMethod is obsolete. The message is:
  "This method is obsolete. Use managed MsgBox instead."
This method calls unmanaged code.
The Unmanaged attribute type is User.

*/

open System
open System.Runtime.InteropServices

// Define an enumeration of Win32 unmanaged types
type UnmanagedType =
    | User = 0
    | GDI = 1
    | Kernel = 2
    | Shell = 3
    | Networking = 4
    | Multimedia = 5

// Define the Unmanaged attribute.
type UnmanagedAttribute(unmanagedType) =
    inherit Attribute()
    
    // Define a property to get and set the UnmanagedType value.
    member val Win32Type = unmanagedType with get, set

// Create a module for an imported Win32 unmanaged function.
module Win32 =
    [<DllImport("user32.dll", CharSet = CharSet.Unicode)>]
    extern int MessageBox(IntPtr hWnd, String text, String caption, uint ``type``)

type AClass() =
    // Add some attributes to Win32CallMethod.
    [<Obsolete "This method is obsolete. Use managed MsgBox instead.">]
    [<Unmanaged(UnmanagedType.User)>]
    member _.Win32CallMethod () =
        Win32.MessageBox(0, "This is an unmanaged call.", "Caution!", 0u)

// Get the AClass type to access its metadata.
let clsType = typeof<AClass>
// Get the type information for Win32CallMethod.
let mInfo = clsType.GetMethod "Win32CallMethod"
if mInfo <> null then
    // Iterate through all the attributes of the method.
    for attr in Attribute.GetCustomAttributes mInfo do
        match attr with 
        // Check for the Obsolete attribute.
        | :? ObsoleteAttribute as attr ->
            printfn $"Method {mInfo.Name} is obsolete. The message is:"
            printfn $"  \"{attr.Message}\""

        // Check for the Unmanaged attribute.
        | :? UnmanagedAttribute as attr ->
            printfn "This method calls unmanaged code."
            printfn $"The Unmanaged attribute type is {attr.Win32Type}."
            let myCls = AClass()
            myCls.Win32CallMethod() |> ignore
        | _ -> ()

// This code example produces the following results.
//
// First, the compilation yields the warning, "... This method is
// obsolete. Use managed MsgBox instead."
// Second, execution yields a message box with a title of "Caution!"
// and message text of "This is an unmanaged call."
// Third, the following text is displayed in the console window:

// Method Win32CallMethod is obsolete. The message is:
//   "This method is obsolete. Use managed MsgBox instead."
// This method calls unmanaged code.
// The Unmanaged attribute type is User.

Imports System.Reflection
Imports System.Security
Imports System.Runtime.InteropServices

' Define an enumeration of Win32 unmanaged types
Public Enum UnmanagedType
    User
    GDI
    Kernel
    Shell
    Networking
    Multimedia
End Enum 'UnmanagedType

' Define the Unmanaged attribute.
Public Class UnmanagedAttribute 
             Inherits Attribute

    ' Storage for the UnmanagedType value.
    Protected thisType As UnmanagedType
    
    ' Set the unmanaged type in the constructor.
    Public Sub New(ByVal type As UnmanagedType) 
        thisType = type
    End Sub
    
    ' Define a property to get and set the UnmanagedType value.
    Public Property Win32Type() As UnmanagedType 
        Get
            Return thisType
        End Get
        Set
            thisType = Win32Type
        End Set
    End Property
End Class

' Create a class for an imported Win32 unmanaged function.
Public Class Win32
    <DllImport("user32.dll", CharSet:=CharSet.Unicode)> _
    Public Shared Function MessageBox(ByVal hWnd As Integer, _
                                      ByVal Text As String, _
                                      ByVal caption As String, _
                                      ByVal type As Integer) As Integer
    End Function 'MessageBox
End Class

Public Class AClass
    ' Add some attributes to Win32CallMethod.
    <Obsolete("This method is obsolete. Use managed MsgBox instead."), _
     Unmanaged(UnmanagedType.User)>  _
    Public Sub Win32CallMethod() 
        Win32.MessageBox(0, "This is an unmanaged call.", "Caution!", 0)    
    End Sub
End Class

Class DemoClass
    Shared Sub Main(ByVal args() As String) 
        ' Get the AClass type to access its metadata.
        Dim clsType As Type = GetType(AClass)
        ' Get the type information for Win32CallMethod.
        Dim mInfo As MethodInfo = clsType.GetMethod("Win32CallMethod")
        If Not (mInfo Is Nothing) Then
            ' Iterate through all the attributes of the method.
            Dim attr As Attribute
            For Each attr In  Attribute.GetCustomAttributes(mInfo)
                ' Check for the Obsolete attribute.
                If attr.GetType().Equals(GetType(ObsoleteAttribute)) Then
                    Console.WriteLine("Method {0} is obsolete. The message is:", mInfo.Name)
                    Console.WriteLine("  ""{0}""", CType(attr, ObsoleteAttribute).Message)
                ' Check for the Unmanaged attribute.
                ElseIf attr.GetType().Equals(GetType(UnmanagedAttribute)) Then
                    Console.WriteLine("This method calls unmanaged code.")
                    Console.WriteLine( _
                            String.Format("The Unmanaged attribute type is {0}.", _
                            CType(attr, UnmanagedAttribute).Win32Type))
                    Dim myCls As New AClass()
                    myCls.Win32CallMethod()
                End If
            Next attr
        End If
    End Sub
End Class

'
'This code example produces the following results. 
'
'First, the compilation yields the warning, "... This method is 
'obsolete. Use managed MsgBox instead."
'Second, execution yields a message box with a title of "Caution!" 
'and message text of "This is an unmanaged call." 
'Third, the following text is displayed in the console window:
'
'Method Win32CallMethod is obsolete. The message is:
'  "This method is obsolete. Use managed MsgBox instead."
'This method calls unmanaged code.
'The Unmanaged attribute type is User.
'

Применяется к

GetCustomAttributes(Assembly)

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Извлекает массив настраиваемых атрибутов, применяемых к сборке. Параметр задает сборку.

public:
 static cli::array <Attribute ^> ^ GetCustomAttributes(System::Reflection::Assembly ^ element);

public static Attribute[] GetCustomAttributes (System.Reflection.Assembly element);

static member GetCustomAttributes : System.Reflection.Assembly -> Attribute[]

Public Shared Function GetCustomAttributes (element As Assembly) As Attribute()

Параметры

element: Assembly

Объект, производный от класса Assembly, описывающего повторно используемый набор модулей.

Возвращаемое значение

Attribute[]

Исключения

ArgumentNullException

element null.

Примеры

В следующем примере извлекаются настраиваемые атрибуты, найденные в текущей сборке.

using namespace System;
using namespace System::Reflection;

[assembly:AssemblyTitle("CustAttrs1CPP")];
[assembly:AssemblyDescription("GetCustomAttributes() Demo")];
[assembly:AssemblyCompany("Microsoft")];

ref class Example
{};

static void main()
{
    Type^ clsType = Example::typeid;

    // Get the Assembly type to access its metadata.
    Assembly^ assy = clsType->Assembly;

    // Iterate through the attributes for the assembly.
    System::Collections::IEnumerator^ myEnum = Attribute::GetCustomAttributes( assy )->GetEnumerator();
    while ( myEnum->MoveNext() )
    {
       Attribute^ attr = safe_cast<Attribute^>(myEnum->Current);

       // Check for the AssemblyTitle attribute.
       if ( attr->GetType() == AssemblyTitleAttribute::typeid )
          Console::WriteLine( "Assembly title is \"{0}\".", (dynamic_cast<AssemblyTitleAttribute^>(attr))->Title );
          // Check for the AssemblyDescription attribute.
       else
          // Check for the AssemblyDescription attribute.
          if ( attr->GetType() == AssemblyDescriptionAttribute::typeid )
             Console::WriteLine( "Assembly description is \"{0}\".", (dynamic_cast<AssemblyDescriptionAttribute^>(attr))->Description );
          // Check for the AssemblyCompany attribute.
          else if ( attr->GetType() == AssemblyCompanyAttribute::typeid )
             Console::WriteLine( "Assembly company is {0}.", (dynamic_cast<AssemblyCompanyAttribute^>(attr))->Company );
    }
}
// The example displays the following output:
//     Assembly description is "GetCustomAttributes() Demo".
//     Assembly company is Microsoft.
//     Assembly title is "CustAttrs1CPP".

using System;
using System.Reflection;

[assembly: AssemblyTitle("CustAttrs1CS")]
[assembly: AssemblyDescription("GetCustomAttributes() Demo")]
[assembly: AssemblyCompany("Microsoft")]

class Example {
    static void Main() {
        // Get the Assembly object to access its metadata.
        Assembly assy = typeof(Example).Assembly;

        // Iterate through the attributes for the assembly.
        foreach(Attribute attr in Attribute.GetCustomAttributes(assy)) {
            // Check for the AssemblyTitle attribute.
            if (attr.GetType() == typeof(AssemblyTitleAttribute))
                Console.WriteLine("Assembly title is \"{0}\".",
                    ((AssemblyTitleAttribute)attr).Title);

            // Check for the AssemblyDescription attribute.
            else if (attr.GetType() ==
                typeof(AssemblyDescriptionAttribute))
                Console.WriteLine("Assembly description is \"{0}\".",
                    ((AssemblyDescriptionAttribute)attr).Description);

            // Check for the AssemblyCompany attribute.
            else if (attr.GetType() == typeof(AssemblyCompanyAttribute))
                Console.WriteLine("Assembly company is {0}.",
                    ((AssemblyCompanyAttribute)attr).Company);
        }
   }
}
// The example displays the following output:
//     Assembly title is "CustAttrs1CS".
//     Assembly description is "GetCustomAttributes() Demo".
//     Assembly company is Microsoft.

open System
open System.Reflection

[<assembly: AssemblyTitle "CustAttrs1CS">]
[<assembly: AssemblyDescription "GetCustomAttributes() Demo">]
[<assembly: AssemblyCompany"Microsoft">]
do ()

type Example = class end

// Get the Assembly object to access its metadata.
let assembly = typeof<Example>.Assembly

// Iterate through the attributes for the assembly.
for attr in Attribute.GetCustomAttributes assembly do
    match attr with
    // Check for the AssemblyTitle attribute.
    | :? AssemblyTitleAttribute as attr ->    
        printfn $"Assembly title is \"{attr.Title}\"."
    // Check for the AssemblyDescription attribute.
    | :? AssemblyDescriptionAttribute as attr ->
        printfn $"Assembly description is \"{attr.Description}\"."
    // Check for the AssemblyCompany attribute.
    | :? AssemblyCompanyAttribute as attr ->
        printfn $"Assembly company is {attr.Company}."
    | _ -> ()
    
// The example displays the following output:
//     Assembly title is "CustAttrs1CS".
//     Assembly description is "GetCustomAttributes() Demo".
//     Assembly company is Microsoft.

Imports System.Reflection

<Assembly: AssemblyTitle("CustAttrs1VB")> 
<Assembly: AssemblyDescription("GetCustomAttributes() Demo")> 
<Assembly: AssemblyCompany("Microsoft")> 

Module Example
    Sub Main()
        ' Get the Assembly type to access its metadata.
        Dim assy As Reflection.Assembly = GetType(Example).Assembly

        ' Iterate through all the attributes for the assembly.
        For Each attr As Attribute In Attribute.GetCustomAttributes(assy)
            ' Check for the AssemblyTitle attribute.
            If TypeOf attr Is AssemblyTitleAttribute Then
                ' Convert the attribute to access its data.
                Dim attrTitle As AssemblyTitleAttribute = _
                    CType(attr, AssemblyTitleAttribute)
                Console.WriteLine("Assembly title is ""{0}"".", _
                    attrTitle.Title)

            ' Check for the AssemblyDescription attribute.
            ElseIf TypeOf attr Is AssemblyDescriptionAttribute Then
                ' Convert the attribute to access its data.
                Dim attrDesc As AssemblyDescriptionAttribute = _
                    CType(attr, AssemblyDescriptionAttribute)
                Console.WriteLine("Assembly description is ""{0}"".", _
                    attrDesc.Description)

            ' Check for the AssemblyCompany attribute.
            ElseIf TypeOf attr Is AssemblyCompanyAttribute Then
                ' Convert the attribute to access its data.
                Dim attrComp As AssemblyCompanyAttribute = _
                    CType(attr, AssemblyCompanyAttribute)
                Console.WriteLine("Assembly company is {0}.", _
                    attrComp.Company)
            End If
        Next
    End Sub
End Module
' The example displays the following output:
'     Assembly company is Microsoft.
'     Assembly description is "GetCustomAttributes() Demo".
'     Assembly title is "CustAttrs1VB".

Применяется к

GetCustomAttributes(Module, Boolean)

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Исходный код:: Attribute.CoreCLR.cs

Извлекает массив настраиваемых атрибутов, применяемых к модулю. Параметры указывают модуль и игнорируемый параметр поиска.

public:
 static cli::array <Attribute ^> ^ GetCustomAttributes(System::Reflection::Module ^ element, bool inherit);

public static Attribute[] GetCustomAttributes (System.Reflection.Module element, bool inherit);

static member GetCustomAttributes : System.Reflection.Module * bool -> Attribute[]

Public Shared Function GetCustomAttributes (element As Module, inherit As Boolean) As Attribute()

Параметры

element: Module

Объект, производный от класса Module, описывающего переносимый исполняемый файл.

inherit: Boolean

Этот параметр игнорируется и не влияет на работу этого метода.

Возвращаемое значение

Attribute[]

Исключения

ArgumentNullException

element null.

Примеры

В следующем примере кода показано использование GetCustomAttributes, принимая Module в качестве параметра.

using namespace System;
using namespace System::Reflection;
using namespace System::ComponentModel;

// Assign some attributes to the module.
// Set the module's CLSCompliant attribute to false
// The CLSCompliant attribute is applicable for /target:module.
[module:Description("A sample description")];
[module:CLSCompliant(false)];
namespace CustAttrs2CS
{
   ref class DemoClass
   {
   public:
      static void Main()
      {
         Type^ clsType = DemoClass::typeid;

         // Get the Module type to access its metadata.
         Module^ module = clsType->Module;

         // Iterate through all the attributes for the module.
         System::Collections::IEnumerator^ myEnum1 = Attribute::GetCustomAttributes( module )->GetEnumerator();
         while ( myEnum1->MoveNext() )
         {
            Attribute^ attr = safe_cast<Attribute^>(myEnum1->Current);

            // Check for the Description attribute.
            if ( attr->GetType() == DescriptionAttribute::typeid )
                        Console::WriteLine( "Module {0} has the description \"{1}\".", module->Name, (dynamic_cast<DescriptionAttribute^>(attr))->Description );
            // Check for the CLSCompliant attribute.
            else

            // Check for the CLSCompliant attribute.
            if ( attr->GetType() == CLSCompliantAttribute::typeid )
                        Console::WriteLine( "Module {0} {1} CLSCompliant.", module->Name, (dynamic_cast<CLSCompliantAttribute^>(attr))->IsCompliant ? (String^)"is" : "is not" );
         }
      }
   };
}


/*
 * Output:
 * Module CustAttrs2CS.exe is not CLSCompliant.
 * Module CustAttrs2CS.exe has the description "A sample description".
 */

using System;
using System.Reflection;
using System.ComponentModel;

// Assign some attributes to the module.
[module:Description("A sample description")]

// Set the module's CLSCompliant attribute to false
// The CLSCompliant attribute is applicable for /target:module.
[module:CLSCompliant(false)]

namespace CustAttrs2CS {
    class DemoClass {
        static void Main(string[] args) {
            Type clsType = typeof(DemoClass);
            // Get the Module type to access its metadata.
            Module module = clsType.Module;

            // Iterate through all the attributes for the module.
            foreach(Attribute attr in Attribute.GetCustomAttributes(module)) {
                // Check for the Description attribute.
                if (attr.GetType() == typeof(DescriptionAttribute))
                    Console.WriteLine("Module {0} has the description " +
                        "\"{1}\".", module.Name,
                        ((DescriptionAttribute)attr).Description);
                // Check for the CLSCompliant attribute.
                else if (attr.GetType() == typeof(CLSCompliantAttribute))
                    Console.WriteLine("Module {0} {1} CLSCompliant.",
                        module.Name,
                        ((CLSCompliantAttribute)attr).IsCompliant ?
                            "is" : "is not");
            }
        }
    }
}

/*
 * Output:
 * Module CustAttrs2CS.exe is not CLSCompliant.
 * Module CustAttrs2CS.exe has the description "A sample description".
 */

open System
open System.ComponentModel

// Assign some attributes to the module.
[<``module``: Description "A sample description">]

// Set the module's CLSCompliant attribute to false
// The CLSCompliant attribute is applicable for /target:module.
[<``module``: CLSCompliant false>]
do ()

type DemoClass = class end

// Get the Module type to access its metadata.
let ilmodule = typeof<DemoClass>.Module

// Iterate through all the attributes for the module.
for attr in Attribute.GetCustomAttributes ilmodule do
    match attr with
    // Check for the Description attribute.
    | :? DescriptionAttribute as attr ->
        printfn $"Module {ilmodule.Name} has the description \"{attr.Description}\"."
                
    // Check for the CLSCompliant attribute.
    | :? CLSCompliantAttribute as attr ->
        printfn $"""Module {ilmodule.Name} {if attr.IsCompliant then "is" else "is not"} CLSCompliant."""
    | _ -> ()
    
// Output:
// Module CustAttrs2CS.exe is not CLSCompliant.
// Module CustAttrs2CS.exe has the description "A sample description".

Imports System.Reflection
Imports System.ComponentModel

' Give the Module some attributes.
<Module: Description("A sample description")> 

' Make the CLSCompliant attribute False.
' The CLSCompliant attribute is applicable for /target:module.
<Module: CLSCompliant(False)> 

Module DemoModule

    Sub Main()
        ' Get the Module type to access its metadata.
        Dim modType As Reflection.Module = GetType(DemoModule).Module
        Dim attr As Attribute
        ' Iterate through all the attributes for the module.
        For Each attr In Attribute.GetCustomAttributes(modType)
            ' Check for the Description attribute.
            If TypeOf attr Is DescriptionAttribute Then
                ' Convert the attribute to access its data.
                Dim descAttr As DescriptionAttribute = _
                    CType(attr, DescriptionAttribute)
                Console.WriteLine("Module {0} has the description ""{1}"".", _
                    modType.Name, descAttr.Description)

            ' Check for the CLSCompliant attribute.
            ElseIf TypeOf attr Is CLSCompliantAttribute Then
                ' Convert the attribute to access its data.
                Dim CLSCompAttr As CLSCompliantAttribute = _
                    CType(attr, CLSCompliantAttribute)
                Dim strCompliant As String
                If CLSCompAttr.IsCompliant Then
                    strCompliant = "is"
                Else
                    strCompliant = "is not"
                End If
                Console.WriteLine("Module {0} {1} CLSCompliant.", _
                    modType.Name, strCompliant)
            End If
        Next
    End Sub
End Module

' Output:
' Module CustAttrs2VB.exe has the description "A sample description".
' Module CustAttrs2VB.exe is not CLSCompliant.

Применяется к

Поделиться через

Attribute.GetCustomAttributes Метод

Определение

Перегрузки

GetCustomAttributes(ParameterInfo, Boolean)

Параметры

Возвращаемое значение

Исключения

Примеры

Комментарии

Применяется к

GetCustomAttributes(MemberInfo, Type, Boolean)

Параметры

Возвращаемое значение

Исключения

Примеры

Комментарии

Применяется к

GetCustomAttributes(ParameterInfo, Type, Boolean)

Параметры

Возвращаемое значение

Исключения

Примеры

Комментарии

Применяется к

GetCustomAttributes(Module, Type, Boolean)

Параметры

Возвращаемое значение

Исключения

Примеры

Комментарии

Применяется к

GetCustomAttributes(MemberInfo, Type)

Параметры

Возвращаемое значение

Исключения

Примеры

Комментарии

Применяется к

GetCustomAttributes(Assembly, Type, Boolean)

Параметры

Возвращаемое значение

Исключения

Примеры

Комментарии

Применяется к

GetCustomAttributes(Module, Type)

Параметры

Возвращаемое значение

Исключения

Примеры

Применяется к

GetCustomAttributes(ParameterInfo, Type)

Параметры

Возвращаемое значение

Исключения

Примеры

Комментарии

Применяется к

GetCustomAttributes(MemberInfo, Boolean)

Параметры

Возвращаемое значение

Исключения

Примеры

Комментарии

Применяется к

GetCustomAttributes(Assembly, Type)

Параметры

Возвращаемое значение

Исключения

Примеры

Комментарии

Применяется к

GetCustomAttributes(Assembly, Boolean)

Параметры

Возвращаемое значение

Исключения

Примеры

Применяется к

GetCustomAttributes(ParameterInfo)