AssemblyBuilder.DefineVersionInfoResource Метод

Ссылка

Определение

Пространство имен:: System.Reflection.Emit

Сборка:: mscorlib.dll

Важно!

Некоторые сведения относятся к предварительной версии продукта, в которую до выпуска могут быть внесены существенные изменения. Майкрософт не предоставляет никаких гарантий, явных или подразумеваемых, относительно приведенных здесь сведений.

Определяет неуправляемую версию информационного ресурса для этой сборки.

Перегрузки

DefineVersionInfoResource()	Определяет неуправляемый ресурс сведений о версии с помощью сведений, указанных в объекте AssemblyName и настраиваемых атрибутах сборки.
DefineVersionInfoResource(String, String, String, String, String)	Определяет неуправляемую версию информационного ресурса для этой сборки с учетом заданных спецификаций.

DefineVersionInfoResource()

Определяет неуправляемый ресурс сведений о версии с помощью сведений, указанных в объекте AssemblyName и настраиваемых атрибутах сборки.

public:
 void DefineVersionInfoResource();

public void DefineVersionInfoResource ();

member this.DefineVersionInfoResource : unit -> unit

Public Sub DefineVersionInfoResource ()

Исключения

ArgumentException

Неуправляемая версия информационного ресурса была определена ранее.

-или-

Объем неуправляемых сведений о версии слишком велик для сохранения.

SecurityException

У вызывающего объекта отсутствует необходимое разрешение.

Примеры

В приведенном ниже примере показано использование DefineVersionInfoResource.

using namespace System;
using namespace System::Reflection;
using namespace System::Reflection::Emit;


/*
// Create the callee transient dynamic assembly.
static Type^ CreateAssembly( AppDomain^ myDomain )
{
   AssemblyName^ myAssemblyName = gcnew AssemblyName;
   myAssemblyName->Name = "MyEmittedAssembly";
   AssemblyBuilder^ myAssembly = myDomain->DefineDynamicAssembly( myAssemblyName, AssemblyBuilderAccess::Save );
   
   // Set Company Attribute to the assembly.
   Type^ companyAttribute = AssemblyCompanyAttribute::typeid;
   array<Type^>^types1 = {String::typeid};
   ConstructorInfo^ myConstructorInfo1 = companyAttribute->GetConstructor( types1 );
   array<Object^>^obj1 = {"Microsoft Corporation"};
   CustomAttributeBuilder^ attributeBuilder1 = gcnew CustomAttributeBuilder( myConstructorInfo1,obj1 );
   myAssembly->SetCustomAttribute( attributeBuilder1 );
   
   // Set Copyright Attribute to the assembly.
   Type^ copyrightAttribute = AssemblyCopyrightAttribute::typeid;
   array<Type^>^types2 = {String::typeid};
   ConstructorInfo^ myConstructorInfo2 = copyrightAttribute->GetConstructor( types2 );
   array<Object^>^obj2 = {"@Copyright Microsoft Corp. 1990-2001"};
   CustomAttributeBuilder^ attributeBuilder2 = gcnew CustomAttributeBuilder( myConstructorInfo2,obj2 );
   myAssembly->SetCustomAttribute( attributeBuilder2 );
   ModuleBuilder^ myModule = myAssembly->DefineDynamicModule( "EmittedModule", "EmittedModule.mod" );
   
   // Define a public class named S"HelloWorld" in the assembly.
   TypeBuilder^ helloWorldClass = myModule->DefineType( "HelloWorld", TypeAttributes::Public );
   
   // Define the Display method.
   MethodBuilder^ myMethod = helloWorldClass->DefineMethod( "Display", MethodAttributes::Public, String::typeid, nullptr );
   
   // Generate IL for GetGreeting.
   ILGenerator^ methodIL = myMethod->GetILGenerator();
   methodIL->Emit( OpCodes::Ldstr, "Display method get called." );
   methodIL->Emit( OpCodes::Ret );
   
   // Returns the type HelloWorld.
   return (helloWorldClass->CreateType());
}
*/

int main()
{
   AssemblyName^ assemName = gcnew AssemblyName();
   assemName->Name = "EmittedAssembly";

   // Create a dynamic assembly in the current application domain,
   // specifying that the assembly is to be saved.
   //
   AssemblyBuilder^ myAssembly = 
      AppDomain::CurrentDomain->DefineDynamicAssembly(assemName, 
         AssemblyBuilderAccess::Save);


   // To apply an attribute to a dynamic assembly, first get the 
   // attribute type. The AssemblyFileVersionAttribute sets the 
   // File Version field on the Version tab of the Windows file
   // properties dialog.
   //
   Type^ attributeType = AssemblyFileVersionAttribute::typeid;

   // To identify the constructor, use an array of types representing
   // the constructor's parameter types. This ctor takes a string.
   //
   array<Type^>^ ctorParameters = { String::typeid };

   // Get the constructor for the attribute.
   //
   ConstructorInfo^ ctor = attributeType->GetConstructor(ctorParameters);

   // Pass the constructor and an array of arguments (in this case,
   // an array containing a single string) to the 
   // CustomAttributeBuilder constructor.
   //
   array<Object^>^ ctorArgs = { "2.0.3033.0" };
   CustomAttributeBuilder^ attribute = 
      gcnew CustomAttributeBuilder(ctor, ctorArgs);

   // Finally, apply the attribute to the assembly.
   //
   myAssembly->SetCustomAttribute(attribute);


   // The pattern described above is used to create and apply
   // several more attributes. As it happens, all these attributes
   // have a constructor that takes a string, so the same ctorArgs
   // variable works for all of them.
    

   // The AssemblyTitleAttribute sets the Description field on
   // the General tab and the Version tab of the Windows file 
   // properties dialog.
   //
   attributeType = AssemblyTitleAttribute::typeid;
   ctor = attributeType->GetConstructor(ctorParameters);
   ctorArgs = gcnew array<Object^> { "The Application Title" };
   attribute = gcnew CustomAttributeBuilder(ctor, ctorArgs);
   myAssembly->SetCustomAttribute(attribute);

   // The AssemblyCopyrightAttribute sets the Copyright field on
   // the Version tab.
   //
   attributeType = AssemblyCopyrightAttribute::typeid;
   ctor = attributeType->GetConstructor(ctorParameters);
   ctorArgs = gcnew array<Object^> { "� My Example Company 1991-2005" };
   attribute = gcnew CustomAttributeBuilder(ctor, ctorArgs);
   myAssembly->SetCustomAttribute(attribute);

   // The AssemblyDescriptionAttribute sets the Comment item.
   //
   attributeType = AssemblyDescriptionAttribute::typeid;
   ctor = attributeType->GetConstructor(ctorParameters);
   attribute = gcnew CustomAttributeBuilder(ctor, 
      gcnew array<Object^> { "This is a comment." });
   myAssembly->SetCustomAttribute(attribute);

   // The AssemblyCompanyAttribute sets the Company item.
   //
   attributeType = AssemblyCompanyAttribute::typeid;
   ctor = attributeType->GetConstructor(ctorParameters);
   attribute = gcnew CustomAttributeBuilder(ctor, 
      gcnew array<Object^> { "My Example Company" });
   myAssembly->SetCustomAttribute(attribute);

   // The AssemblyProductAttribute sets the Product Name item.
   //
   attributeType = AssemblyProductAttribute::typeid;
   ctor = attributeType->GetConstructor(ctorParameters);
   attribute = gcnew CustomAttributeBuilder(ctor, 
      gcnew array<Object^> { "My Product Name" });
   myAssembly->SetCustomAttribute(attribute);


   // Define the assembly's only module. For a single-file assembly,
   // the module name is the assembly name.
   //
   ModuleBuilder^ myModule = 
      myAssembly->DefineDynamicModule(assemName->Name, 
         assemName->Name + ".exe");

   // No types or methods are created for this example.


   // Define the unmanaged version information resource, which
   // contains the attribute informaion applied earlier, and save
   // the assembly. Use the Windows Explorer to examine the properties
   // of the .exe file.
   //
   myAssembly->DefineVersionInfoResource();
   myAssembly->Save(assemName->Name + ".exe");
}

using System;
using System.Reflection;
using System.Reflection.Emit;

class Example
{
   public static void Main()
   {
      AssemblyName assemName = new AssemblyName();
      assemName.Name = "EmittedAssembly";

      // Create a dynamic assembly in the current application domain,
      // specifying that the assembly is to be saved.
      //
      AssemblyBuilder myAssembly =
         AppDomain.CurrentDomain.DefineDynamicAssembly(assemName,
            AssemblyBuilderAccess.Save);

      // To apply an attribute to a dynamic assembly, first get the
      // attribute type. The AssemblyFileVersionAttribute sets the
      // File Version field on the Version tab of the Windows file
      // properties dialog.
      //
      Type attributeType = typeof(AssemblyFileVersionAttribute);

      // To identify the constructor, use an array of types representing
      // the constructor's parameter types. This ctor takes a string.
      //
      Type[] ctorParameters = { typeof(string) };

      // Get the constructor for the attribute.
      //
      ConstructorInfo ctor = attributeType.GetConstructor(ctorParameters);

      // Pass the constructor and an array of arguments (in this case,
      // an array containing a single string) to the
      // CustomAttributeBuilder constructor.
      //
      object[] ctorArgs = { "2.0.3033.0" };
      CustomAttributeBuilder attribute =
         new CustomAttributeBuilder(ctor, ctorArgs);

      // Finally, apply the attribute to the assembly.
      //
      myAssembly.SetCustomAttribute(attribute);

      // The pattern described above is used to create and apply
      // several more attributes. As it happens, all these attributes
      // have a constructor that takes a string, so the same ctorArgs
      // variable works for all of them.

      // The AssemblyTitleAttribute sets the Description field on
      // the General tab and the Version tab of the Windows file
      // properties dialog.
      //
      attributeType = typeof(AssemblyTitleAttribute);
      ctor = attributeType.GetConstructor(ctorParameters);
      ctorArgs = new object[] { "The Application Title" };
      attribute = new CustomAttributeBuilder(ctor, ctorArgs);
      myAssembly.SetCustomAttribute(attribute);

      // The AssemblyCopyrightAttribute sets the Copyright field on
      // the Version tab.
      //
      attributeType = typeof(AssemblyCopyrightAttribute);
      ctor = attributeType.GetConstructor(ctorParameters);
      ctorArgs = new object[] { "© My Example Company 1991-2005" };
      attribute = new CustomAttributeBuilder(ctor, ctorArgs);
      myAssembly.SetCustomAttribute(attribute);

      // The AssemblyDescriptionAttribute sets the Comment item.
      //
      attributeType = typeof(AssemblyDescriptionAttribute);
      ctor = attributeType.GetConstructor(ctorParameters);
      attribute = new CustomAttributeBuilder(ctor,
         new object[] { "This is a comment." });
      myAssembly.SetCustomAttribute(attribute);

      // The AssemblyCompanyAttribute sets the Company item.
      //
      attributeType = typeof(AssemblyCompanyAttribute);
      ctor = attributeType.GetConstructor(ctorParameters);
      attribute = new CustomAttributeBuilder(ctor,
         new object[] { "My Example Company" });
      myAssembly.SetCustomAttribute(attribute);

      // The AssemblyProductAttribute sets the Product Name item.
      //
      attributeType = typeof(AssemblyProductAttribute);
      ctor = attributeType.GetConstructor(ctorParameters);
      attribute = new CustomAttributeBuilder(ctor,
         new object[] { "My Product Name" });
      myAssembly.SetCustomAttribute(attribute);

      // Define the assembly's only module. For a single-file assembly,
      // the module name is the assembly name.
      //
      ModuleBuilder myModule =
         myAssembly.DefineDynamicModule(assemName.Name,
            assemName.Name + ".exe");

      // No types or methods are created for this example.

      // Define the unmanaged version information resource, which
      // contains the attribute informaion applied earlier, and save
      // the assembly. Use the Windows Explorer to examine the properties
      // of the .exe file.
      //
      myAssembly.DefineVersionInfoResource();
      myAssembly.Save(assemName.Name + ".exe");
   }
}

Imports System.Reflection
Imports System.Reflection.Emit

Module Example

   Sub Main()

      Dim assemName As New AssemblyName()
      assemName.Name = "EmittedAssembly"

      ' Create a dynamic assembly in the current application domain,
      ' specifying that the assembly is to be saved.
      '
      Dim myAssembly As AssemblyBuilder = _
         AppDomain.CurrentDomain.DefineDynamicAssembly(assemName, _
            AssemblyBuilderAccess.Save)


      ' To apply an attribute to a dynamic assembly, first get the 
      ' attribute type. The AssemblyFileVersionAttribute sets the 
      ' File Version field on the Version tab of the Windows file
      ' properties dialog.
      '
      Dim attributeType As Type = GetType(AssemblyFileVersionAttribute)

      ' To identify the constructor, use an array of types representing
      ' the constructor's parameter types. This ctor takes a string.
      '
      Dim ctorParameters() As Type = { GetType(String) }

      ' Get the constructor for the attribute.
      '
      Dim ctor As ConstructorInfo = _
                         attributeType.GetConstructor(ctorParameters)

      ' Pass the constructor and an array of arguments (in this case,
      ' an array containing a single string) to the 
      ' CustomAttributeBuilder constructor.
      '
      Dim ctorArgs() As Object = { "2.0.3033.0" }
      Dim attribute As New CustomAttributeBuilder(ctor, ctorArgs)

      ' Finally, apply the attribute to the assembly.
      '
      myAssembly.SetCustomAttribute(attribute)


      ' The pattern described above is used to create and apply
      ' several more attributes. As it happens, all these attributes
      ' have a constructor that takes a string, so the same ctorArgs
      ' variable works for all of them.
      

      ' The AssemblyTitleAttribute sets the Description field on
      ' the General tab and the Version tab of the Windows file 
      ' properties dialog.
      '
      attributeType = GetType(AssemblyTitleAttribute)
      ctor = attributeType.GetConstructor(ctorParameters)
      ctorArgs = New Object() { "The Application Title" }
      attribute = New CustomAttributeBuilder(ctor, ctorArgs)
      myAssembly.SetCustomAttribute(attribute)

      ' The AssemblyCopyrightAttribute sets the Copyright field on
      ' the Version tab.
      '
      attributeType = GetType(AssemblyCopyrightAttribute)
      ctor = attributeType.GetConstructor(ctorParameters)
      ctorArgs = New Object() { "© My Example Company 1991-2005" }
      attribute = New CustomAttributeBuilder(ctor, ctorArgs)
      myAssembly.SetCustomAttribute(attribute)

      ' The AssemblyDescriptionAttribute sets the Comment item.
      '
      attributeType = GetType(AssemblyDescriptionAttribute)
      ctor = attributeType.GetConstructor(ctorParameters)
      attribute = New CustomAttributeBuilder(ctor, _
         New Object() { "This is a comment." })
      myAssembly.SetCustomAttribute(attribute)

      ' The AssemblyCompanyAttribute sets the Company item.
      '
      attributeType = GetType(AssemblyCompanyAttribute)
      ctor = attributeType.GetConstructor(ctorParameters)
      attribute = New CustomAttributeBuilder(ctor, _
         New Object() { "My Example Company" })
      myAssembly.SetCustomAttribute(attribute)

      ' The AssemblyProductAttribute sets the Product Name item.
      '
      attributeType = GetType(AssemblyProductAttribute)
      ctor = attributeType.GetConstructor(ctorParameters)
      attribute = New CustomAttributeBuilder(ctor, _
         New Object() { "My Product Name" })
      myAssembly.SetCustomAttribute(attribute)


      ' Define the assembly's only module. For a single-file assembly,
      ' the module name is the assembly name.
      '
      Dim myModule As ModuleBuilder = _
         myAssembly.DefineDynamicModule(assemName.Name, _
            assemName.Name & ".exe")

      ' No types or methods are created for this example.


      ' Define the unmanaged version information resource, which
      ' contains the attribute informaion applied earlier, and save
      ' the assembly. Use the Windows Explorer to examine the properties
      ' of the .exe file.
      '
      myAssembly.DefineVersionInfoResource()
      myAssembly.Save(assemName.Name & ".exe")

   End Sub 
End Module

Сборка может быть связана только с одним неуправляемым ресурсом. Это означает, что вызов DefineVersionInfoResource или DefineUnmanagedResource после любого из методов, который был вызван ранее, вызовет исключение System.ArgumentException. Несколько неуправляемых ресурсов необходимо объединить с таким средством, как служебная программа Microsoft ResMerge (не поставляется с пакетом SDK среды CLR).

Пустые строки аргументов записываются в виде одного пробела. Пробелы заменяются пустыми символами в строках аргументов.

Информация выводится из объекта , используемого AssemblyName для определения этой динамической сборки. Настраиваемые атрибуты этой сборки переопределяют сведения, указанные в объекте AssemblyName .

Примечание

Начиная с платформа .NET Framework 2.0 с пакетом обновления 1 (SP1), этому члену ReflectionPermissionFlag.ReflectionEmit больше не нужен ReflectionPermission флаг . (См. раздел Проблемы безопасности при отображении отражения.) Чтобы использовать эту функцию, приложение должно быть предназначено для платформа .NET Framework 3.5 или более поздней версии.

Применяется к

DefineVersionInfoResource(String, String, String, String, String)

Определяет неуправляемую версию информационного ресурса для этой сборки с учетом заданных спецификаций.

public:
 void DefineVersionInfoResource(System::String ^ product, System::String ^ productVersion, System::String ^ company, System::String ^ copyright, System::String ^ trademark);

public void DefineVersionInfoResource (string product, string productVersion, string company, string copyright, string trademark);

member this.DefineVersionInfoResource : string * string * string * string * string -> unit

Public Sub DefineVersionInfoResource (product As String, productVersion As String, company As String, copyright As String, trademark As String)

Параметры

product: String

Имя продукта, с которым поставляется данная сборка.

productVersion: String

Версия продукта, с которым поставляется данная сборка.

company: String

Название организации, которая является создателем сборки.

copyright: String

Описывает все уведомления об авторских правах, товарные знаки и охраняемые товарные знаки, применимые к этой сборке. Это должен быть полный текст всех уведомлений, допустимых символов, сроки действия прав, номера товарных знаков и так далее. На русском языке эта строка должна быть в формате "© Корпорация Майкрософт (Microsoft Corporation) 1990-2001".

trademark: String

Описывает товарные знаки и охраняемые товарные знаки, применимые к этой сборке. Это должен быть полный текст всех уведомлений, допустимых символов, номера товарных знаков и так далее. На русском языке эта строка должна быть в формате "Windows является товарным знаком корпорации Майкрософт".

Исключения

ArgumentException

Неуправляемая версия информационного ресурса была определена ранее.

-или-

Объем неуправляемых сведений о версии слишком велик для сохранения.

SecurityException

У вызывающего объекта отсутствует необходимое разрешение.

Примеры

В приведенном ниже примере показано использование DefineVersionInfoResource.

using namespace System;
using namespace System::Reflection;
using namespace System::Reflection::Emit;


/*
// Create the callee transient dynamic assembly.
static Type^ CreateAssembly( AppDomain^ myDomain )
{
   AssemblyName^ myAssemblyName = gcnew AssemblyName;
   myAssemblyName->Name = "MyEmittedAssembly";
   AssemblyBuilder^ myAssembly = myDomain->DefineDynamicAssembly( myAssemblyName, AssemblyBuilderAccess::Save );
   
   // Set Company Attribute to the assembly.
   Type^ companyAttribute = AssemblyCompanyAttribute::typeid;
   array<Type^>^types1 = {String::typeid};
   ConstructorInfo^ myConstructorInfo1 = companyAttribute->GetConstructor( types1 );
   array<Object^>^obj1 = {"Microsoft Corporation"};
   CustomAttributeBuilder^ attributeBuilder1 = gcnew CustomAttributeBuilder( myConstructorInfo1,obj1 );
   myAssembly->SetCustomAttribute( attributeBuilder1 );
   
   // Set Copyright Attribute to the assembly.
   Type^ copyrightAttribute = AssemblyCopyrightAttribute::typeid;
   array<Type^>^types2 = {String::typeid};
   ConstructorInfo^ myConstructorInfo2 = copyrightAttribute->GetConstructor( types2 );
   array<Object^>^obj2 = {"@Copyright Microsoft Corp. 1990-2001"};
   CustomAttributeBuilder^ attributeBuilder2 = gcnew CustomAttributeBuilder( myConstructorInfo2,obj2 );
   myAssembly->SetCustomAttribute( attributeBuilder2 );
   ModuleBuilder^ myModule = myAssembly->DefineDynamicModule( "EmittedModule", "EmittedModule.mod" );
   
   // Define a public class named S"HelloWorld" in the assembly.
   TypeBuilder^ helloWorldClass = myModule->DefineType( "HelloWorld", TypeAttributes::Public );
   
   // Define the Display method.
   MethodBuilder^ myMethod = helloWorldClass->DefineMethod( "Display", MethodAttributes::Public, String::typeid, nullptr );
   
   // Generate IL for GetGreeting.
   ILGenerator^ methodIL = myMethod->GetILGenerator();
   methodIL->Emit( OpCodes::Ldstr, "Display method get called." );
   methodIL->Emit( OpCodes::Ret );
   
   // Returns the type HelloWorld.
   return (helloWorldClass->CreateType());
}
*/

int main()
{
   AssemblyName^ assemName = gcnew AssemblyName();
   assemName->Name = "EmittedAssembly";

   // Create a dynamic assembly in the current application domain,
   // specifying that the assembly is to be saved.
   //
   AssemblyBuilder^ myAssembly = 
      AppDomain::CurrentDomain->DefineDynamicAssembly(assemName, 
         AssemblyBuilderAccess::Save);


   // To apply an attribute to a dynamic assembly, first get the 
   // attribute type. The AssemblyFileVersionAttribute sets the 
   // File Version field on the Version tab of the Windows file
   // properties dialog.
   //
   Type^ attributeType = AssemblyFileVersionAttribute::typeid;

   // To identify the constructor, use an array of types representing
   // the constructor's parameter types. This ctor takes a string.
   //
   array<Type^>^ ctorParameters = { String::typeid };

   // Get the constructor for the attribute.
   //
   ConstructorInfo^ ctor = attributeType->GetConstructor(ctorParameters);

   // Pass the constructor and an array of arguments (in this case,
   // an array containing a single string) to the 
   // CustomAttributeBuilder constructor.
   //
   array<Object^>^ ctorArgs = { "2.0.3033.0" };
   CustomAttributeBuilder^ attribute = 
      gcnew CustomAttributeBuilder(ctor, ctorArgs);

   // Finally, apply the attribute to the assembly.
   //
   myAssembly->SetCustomAttribute(attribute);


   // The pattern described above is used to create and apply
   // several more attributes. As it happens, all these attributes
   // have a constructor that takes a string, so the same ctorArgs
   // variable works for all of them.
    

   // The AssemblyTitleAttribute sets the Description field on
   // the General tab and the Version tab of the Windows file 
   // properties dialog.
   //
   attributeType = AssemblyTitleAttribute::typeid;
   ctor = attributeType->GetConstructor(ctorParameters);
   ctorArgs = gcnew array<Object^> { "The Application Title" };
   attribute = gcnew CustomAttributeBuilder(ctor, ctorArgs);
   myAssembly->SetCustomAttribute(attribute);

   // The AssemblyCopyrightAttribute sets the Copyright field on
   // the Version tab.
   //
   attributeType = AssemblyCopyrightAttribute::typeid;
   ctor = attributeType->GetConstructor(ctorParameters);
   ctorArgs = gcnew array<Object^> { "� My Example Company 1991-2005" };
   attribute = gcnew CustomAttributeBuilder(ctor, ctorArgs);
   myAssembly->SetCustomAttribute(attribute);

   // The AssemblyDescriptionAttribute sets the Comment item.
   //
   attributeType = AssemblyDescriptionAttribute::typeid;
   ctor = attributeType->GetConstructor(ctorParameters);
   attribute = gcnew CustomAttributeBuilder(ctor, 
      gcnew array<Object^> { "This is a comment." });
   myAssembly->SetCustomAttribute(attribute);

   // The AssemblyCompanyAttribute sets the Company item.
   //
   attributeType = AssemblyCompanyAttribute::typeid;
   ctor = attributeType->GetConstructor(ctorParameters);
   attribute = gcnew CustomAttributeBuilder(ctor, 
      gcnew array<Object^> { "My Example Company" });
   myAssembly->SetCustomAttribute(attribute);

   // The AssemblyProductAttribute sets the Product Name item.
   //
   attributeType = AssemblyProductAttribute::typeid;
   ctor = attributeType->GetConstructor(ctorParameters);
   attribute = gcnew CustomAttributeBuilder(ctor, 
      gcnew array<Object^> { "My Product Name" });
   myAssembly->SetCustomAttribute(attribute);


   // Define the assembly's only module. For a single-file assembly,
   // the module name is the assembly name.
   //
   ModuleBuilder^ myModule = 
      myAssembly->DefineDynamicModule(assemName->Name, 
         assemName->Name + ".exe");

   // No types or methods are created for this example.


   // Define the unmanaged version information resource, which
   // contains the attribute informaion applied earlier, and save
   // the assembly. Use the Windows Explorer to examine the properties
   // of the .exe file.
   //
   myAssembly->DefineVersionInfoResource();
   myAssembly->Save(assemName->Name + ".exe");
}

using System;
using System.Reflection;
using System.Reflection.Emit;

class Example
{
   public static void Main()
   {
      AssemblyName assemName = new AssemblyName();
      assemName.Name = "EmittedAssembly";

      // Create a dynamic assembly in the current application domain,
      // specifying that the assembly is to be saved.
      //
      AssemblyBuilder myAssembly =
         AppDomain.CurrentDomain.DefineDynamicAssembly(assemName,
            AssemblyBuilderAccess.Save);

      // To apply an attribute to a dynamic assembly, first get the
      // attribute type. The AssemblyFileVersionAttribute sets the
      // File Version field on the Version tab of the Windows file
      // properties dialog.
      //
      Type attributeType = typeof(AssemblyFileVersionAttribute);

      // To identify the constructor, use an array of types representing
      // the constructor's parameter types. This ctor takes a string.
      //
      Type[] ctorParameters = { typeof(string) };

      // Get the constructor for the attribute.
      //
      ConstructorInfo ctor = attributeType.GetConstructor(ctorParameters);

      // Pass the constructor and an array of arguments (in this case,
      // an array containing a single string) to the
      // CustomAttributeBuilder constructor.
      //
      object[] ctorArgs = { "2.0.3033.0" };
      CustomAttributeBuilder attribute =
         new CustomAttributeBuilder(ctor, ctorArgs);

      // Finally, apply the attribute to the assembly.
      //
      myAssembly.SetCustomAttribute(attribute);

      // The pattern described above is used to create and apply
      // several more attributes. As it happens, all these attributes
      // have a constructor that takes a string, so the same ctorArgs
      // variable works for all of them.

      // The AssemblyTitleAttribute sets the Description field on
      // the General tab and the Version tab of the Windows file
      // properties dialog.
      //
      attributeType = typeof(AssemblyTitleAttribute);
      ctor = attributeType.GetConstructor(ctorParameters);
      ctorArgs = new object[] { "The Application Title" };
      attribute = new CustomAttributeBuilder(ctor, ctorArgs);
      myAssembly.SetCustomAttribute(attribute);

      // The AssemblyCopyrightAttribute sets the Copyright field on
      // the Version tab.
      //
      attributeType = typeof(AssemblyCopyrightAttribute);
      ctor = attributeType.GetConstructor(ctorParameters);
      ctorArgs = new object[] { "© My Example Company 1991-2005" };
      attribute = new CustomAttributeBuilder(ctor, ctorArgs);
      myAssembly.SetCustomAttribute(attribute);

      // The AssemblyDescriptionAttribute sets the Comment item.
      //
      attributeType = typeof(AssemblyDescriptionAttribute);
      ctor = attributeType.GetConstructor(ctorParameters);
      attribute = new CustomAttributeBuilder(ctor,
         new object[] { "This is a comment." });
      myAssembly.SetCustomAttribute(attribute);

      // The AssemblyCompanyAttribute sets the Company item.
      //
      attributeType = typeof(AssemblyCompanyAttribute);
      ctor = attributeType.GetConstructor(ctorParameters);
      attribute = new CustomAttributeBuilder(ctor,
         new object[] { "My Example Company" });
      myAssembly.SetCustomAttribute(attribute);

      // The AssemblyProductAttribute sets the Product Name item.
      //
      attributeType = typeof(AssemblyProductAttribute);
      ctor = attributeType.GetConstructor(ctorParameters);
      attribute = new CustomAttributeBuilder(ctor,
         new object[] { "My Product Name" });
      myAssembly.SetCustomAttribute(attribute);

      // Define the assembly's only module. For a single-file assembly,
      // the module name is the assembly name.
      //
      ModuleBuilder myModule =
         myAssembly.DefineDynamicModule(assemName.Name,
            assemName.Name + ".exe");

      // No types or methods are created for this example.

      // Define the unmanaged version information resource, which
      // contains the attribute informaion applied earlier, and save
      // the assembly. Use the Windows Explorer to examine the properties
      // of the .exe file.
      //
      myAssembly.DefineVersionInfoResource();
      myAssembly.Save(assemName.Name + ".exe");
   }
}

Imports System.Reflection
Imports System.Reflection.Emit

Module Example

   Sub Main()

      Dim assemName As New AssemblyName()
      assemName.Name = "EmittedAssembly"

      ' Create a dynamic assembly in the current application domain,
      ' specifying that the assembly is to be saved.
      '
      Dim myAssembly As AssemblyBuilder = _
         AppDomain.CurrentDomain.DefineDynamicAssembly(assemName, _
            AssemblyBuilderAccess.Save)


      ' To apply an attribute to a dynamic assembly, first get the 
      ' attribute type. The AssemblyFileVersionAttribute sets the 
      ' File Version field on the Version tab of the Windows file
      ' properties dialog.
      '
      Dim attributeType As Type = GetType(AssemblyFileVersionAttribute)

      ' To identify the constructor, use an array of types representing
      ' the constructor's parameter types. This ctor takes a string.
      '
      Dim ctorParameters() As Type = { GetType(String) }

      ' Get the constructor for the attribute.
      '
      Dim ctor As ConstructorInfo = _
                         attributeType.GetConstructor(ctorParameters)

      ' Pass the constructor and an array of arguments (in this case,
      ' an array containing a single string) to the 
      ' CustomAttributeBuilder constructor.
      '
      Dim ctorArgs() As Object = { "2.0.3033.0" }
      Dim attribute As New CustomAttributeBuilder(ctor, ctorArgs)

      ' Finally, apply the attribute to the assembly.
      '
      myAssembly.SetCustomAttribute(attribute)


      ' The pattern described above is used to create and apply
      ' several more attributes. As it happens, all these attributes
      ' have a constructor that takes a string, so the same ctorArgs
      ' variable works for all of them.
      

      ' The AssemblyTitleAttribute sets the Description field on
      ' the General tab and the Version tab of the Windows file 
      ' properties dialog.
      '
      attributeType = GetType(AssemblyTitleAttribute)
      ctor = attributeType.GetConstructor(ctorParameters)
      ctorArgs = New Object() { "The Application Title" }
      attribute = New CustomAttributeBuilder(ctor, ctorArgs)
      myAssembly.SetCustomAttribute(attribute)

      ' The AssemblyCopyrightAttribute sets the Copyright field on
      ' the Version tab.
      '
      attributeType = GetType(AssemblyCopyrightAttribute)
      ctor = attributeType.GetConstructor(ctorParameters)
      ctorArgs = New Object() { "© My Example Company 1991-2005" }
      attribute = New CustomAttributeBuilder(ctor, ctorArgs)
      myAssembly.SetCustomAttribute(attribute)

      ' The AssemblyDescriptionAttribute sets the Comment item.
      '
      attributeType = GetType(AssemblyDescriptionAttribute)
      ctor = attributeType.GetConstructor(ctorParameters)
      attribute = New CustomAttributeBuilder(ctor, _
         New Object() { "This is a comment." })
      myAssembly.SetCustomAttribute(attribute)

      ' The AssemblyCompanyAttribute sets the Company item.
      '
      attributeType = GetType(AssemblyCompanyAttribute)
      ctor = attributeType.GetConstructor(ctorParameters)
      attribute = New CustomAttributeBuilder(ctor, _
         New Object() { "My Example Company" })
      myAssembly.SetCustomAttribute(attribute)

      ' The AssemblyProductAttribute sets the Product Name item.
      '
      attributeType = GetType(AssemblyProductAttribute)
      ctor = attributeType.GetConstructor(ctorParameters)
      attribute = New CustomAttributeBuilder(ctor, _
         New Object() { "My Product Name" })
      myAssembly.SetCustomAttribute(attribute)


      ' Define the assembly's only module. For a single-file assembly,
      ' the module name is the assembly name.
      '
      Dim myModule As ModuleBuilder = _
         myAssembly.DefineDynamicModule(assemName.Name, _
            assemName.Name & ".exe")

      ' No types or methods are created for this example.


      ' Define the unmanaged version information resource, which
      ' contains the attribute informaion applied earlier, and save
      ' the assembly. Use the Windows Explorer to examine the properties
      ' of the .exe file.
      '
      myAssembly.DefineVersionInfoResource()
      myAssembly.Save(assemName.Name & ".exe")

   End Sub 
End Module

Сборка может быть связана только с одним неуправляемым ресурсом. Это означает, что вызов DefineVersionInfoResource или DefineUnmanagedResource после любого из методов, который был вызван ранее, вызовет исключение System.ArgumentException. Несколько неуправляемых ресурсов необходимо объединить с таким средством, как служебная программа Майкрософт ResMerge (не поставляется с пакетом SDK среды CLR).

Структура ресурса версии включает данные, определяющие версию, язык и распространение файла. Программы установки используют функции в библиотеке установки файлов (VER.DLL) для получения ресурса сведений о версии из файла и для извлечения блоков сведений о версии из ресурса.

Примечание

Применяется к

Поделиться через

AssemblyBuilder.DefineVersionInfoResource Метод

Определение

Перегрузки

DefineVersionInfoResource()

Исключения

Примеры

Комментарии

Применяется к

DefineVersionInfoResource(String, String, String, String, String)

Параметры

Исключения

Примеры

Комментарии

Применяется к

Дополнительные ресурсы