Использование кэширования в модели автоматизации пользовательского интерфейса

Статья
04/08/2023

Примечание.

Эта документация предназначена для разработчиков .NET Framework, желающих использовать управляемые классы автоматизации пользовательского интерфейса, определенные в пространстве имен System.Windows.Automation. Последние сведения об автоматизации пользовательского интерфейса см. в статье API автоматизации Windows. Автоматизация пользовательского интерфейса.

В этом разделе показано, как реализовать кэширование шаблонов элементов управления и свойств AutomationElement .

Активация запроса кэша

Создайте CacheRequest.
Укажите свойства и шаблоны для кэширования с помощью Add.
Укажите область кэширования, установив свойство TreeScope .
Укажите представление поддерева, установив свойство TreeFilter .
Задайте для свойства AutomationElementMode значение None , если хотите повысить эффективность, не получая полную ссылку на объекты. (Это сделает невозможным получение текущих значений из этих объектов.)
Активируйте запрос с помощью Activateusing блока (Using в Microsoft Visual Basic .NET).

После получения объекта AutomationElement или подписки на события деактивируйте запрос с помощью Pop (если использовался Push ) или удалив объект, созданный Activate. (Используйте Activate блок using (Using в Microsoft Visual Basic .NET).

Кэширование свойств AutomationElement

Когда CacheRequest активен, получите объекты AutomationElement с помощью метода FindFirst или FindAll; или получите AutomationElement как источник события, для которого вы зарегистрировались, когда был активен CacheRequest . (Можно также создать кэш, передав CacheRequest в GetUpdatedCache или в один из методов TreeWalker .)
Используйте GetCachedPropertyValue или получите свойство из свойства Cached элемента AutomationElement.

Получение кэшированных шаблонов и их свойств

Когда CacheRequest активен, получите объекты AutomationElement с помощью метода FindFirst или FindAll; или получите AutomationElement как источник события, для которого вы зарегистрировались, когда был активен CacheRequest . (Можно также создать кэш, передав CacheRequest в GetUpdatedCache или в один из методов TreeWalker .)
Используйте метод GetCachedPattern или TryGetCachedPattern для получения кэшированного шаблона.
Получите значения свойства из свойства Cached шаблона элемента управления.

Пример 1

В следующем примере кода показаны различные аспекты кэширования при использовании метода Activate для активации CacheRequest.

/// <summary>
/// Caches and retrieves properties for a list item by using CacheRequest.Activate.
/// </summary>
/// <param name="elementList">Element from which to retrieve a child element.</param>
/// <remarks>
/// This code demonstrates various aspects of caching. It is not intended to be
/// an example of a useful method.
/// </remarks>
private void CachePropertiesByActivate(AutomationElement elementList)
{
    AutomationElement elementListItem;

    // Set up the request.
    CacheRequest cacheRequest = new CacheRequest();
    cacheRequest.Add(AutomationElement.NameProperty);
    cacheRequest.Add(AutomationElement.IsEnabledProperty);
    cacheRequest.Add(SelectionItemPattern.Pattern);
    cacheRequest.Add(SelectionItemPattern.SelectionContainerProperty);

    // Obtain an element and cache the requested items.
    using (cacheRequest.Activate())
    {
        Condition cond = new PropertyCondition(AutomationElement.IsSelectionItemPatternAvailableProperty, true);
        elementListItem = elementList.FindFirst(TreeScope.Children, cond);
    }
    // The CacheRequest is now inactive.

    // Retrieve the cached property and pattern.
    SelectionItemPattern pattern;
    String itemName;
    try
    {
        itemName = elementListItem.Cached.Name;
        pattern = elementListItem.GetCachedPattern(SelectionItemPattern.Pattern) as SelectionItemPattern;
    }
    catch (InvalidOperationException)
    {
        Console.WriteLine("Object was not in cache.");
        return;
    }
    // Alternatively, you can use TryGetCachedPattern to retrieve the cached pattern.
    object cachedPattern;
    if (true == elementListItem.TryGetCachedPattern(SelectionItemPattern.Pattern, out cachedPattern))
    {
        pattern = cachedPattern as SelectionItemPattern;
    }

    // Specified pattern properties are also in the cache.
    AutomationElement parentList = pattern.Cached.SelectionContainer;

    // The following line will raise an exception, because the HelpText property was not cached.
    /*** String itemHelp = elementListItem.Cached.HelpText; ***/

    // Similarly, pattern properties that were not specified in the CacheRequest cannot be
    // retrieved from the cache. This would raise an exception.
    /*** bool selected = pattern.Cached.IsSelected; ***/

    // This is still a valid call, even though the property is in the cache.
    // Of course, the cached value and the current value are not guaranteed to be the same.
    itemName = elementListItem.Current.Name;
}

''' <summary>
''' Caches and retrieves properties for a list item by using CacheRequest.Activate.
''' </summary>
''' <param name="elementList">Element from which to retrieve a child element.</param>
''' <remarks>
''' This code demonstrates various aspects of caching. It is not intended to be 
''' an example of a useful method.
''' </remarks>
Private Sub CachePropertiesByActivate(ByVal elementList As AutomationElement)

    ' Set up the request.
    Dim myCacheRequest As New CacheRequest()
    myCacheRequest.Add(AutomationElement.NameProperty)
    myCacheRequest.Add(AutomationElement.IsEnabledProperty)
    myCacheRequest.Add(SelectionItemPattern.Pattern)
    myCacheRequest.Add(SelectionItemPattern.SelectionContainerProperty)

    Dim elementListItem As AutomationElement

    ' Obtain an element and cache the requested items.
    Using myCacheRequest.Activate()
        Dim myCondition As New PropertyCondition( _
            AutomationElement.IsSelectionItemPatternAvailableProperty, True)
        elementListItem = elementList.FindFirst(TreeScope.Children, myCondition)
    End Using


    ' The CacheRequest is now inactive.
    ' Retrieve the cached property and pattern.
    Dim pattern As SelectionItemPattern
    Dim itemName As String
    Try
        itemName = elementListItem.Cached.Name
        pattern = DirectCast(elementListItem.GetCachedPattern(SelectionItemPattern.Pattern), _
            SelectionItemPattern)
    Catch ex As InvalidOperationException
        Console.WriteLine("Object was not in cache.")
        Return
    End Try
    ' Alternatively, you can use TryGetCachedPattern to retrieve the cached pattern.
    Dim cachedPattern As Object = Nothing
    If True = elementListItem.TryGetCachedPattern(SelectionItemPattern.Pattern, cachedPattern) Then
        pattern = DirectCast(cachedPattern, SelectionItemPattern)
    End If

    ' Specified pattern properties are also in the cache.
    Dim parentList As AutomationElement = pattern.Cached.SelectionContainer

    ' The following line will raise an exception, because the HelpText property was not cached.
    '** String itemHelp = elementListItem.Cached.HelpText; **

    ' Similarly, pattern properties that were not specified in the CacheRequest cannot be 
    ' retrieved from the cache. This would raise an exception.
    '** bool selected = pattern.Cached.IsSelected; **

    ' This is still a valid call, even though the property is in the cache.
    ' Of course, the cached value and the current value are not guaranteed to be the same.
    itemName = elementListItem.Current.Name
End Sub

Пример 2

В следующем примере кода показаны различные аспекты кэширования при использовании метода Push для активации CacheRequest. За исключением случая, когда вы хотите вкладывать запросы кэширования, предпочтительнее использовать метод Activate.

/// <summary>
/// Caches and retrieves properties for a list item by using CacheRequest.Push.
/// </summary>
/// <param name="autoElement">Element from which to retrieve a child element.</param>
/// <remarks>
/// This code demonstrates various aspects of caching. It is not intended to be
/// an example of a useful method.
/// </remarks>
private void CachePropertiesByPush(AutomationElement elementList)
{
    // Set up the request.
    CacheRequest cacheRequest = new CacheRequest();

    // Do not get a full reference to the cached objects, only to their cached properties and patterns.
    cacheRequest.AutomationElementMode = AutomationElementMode.None;

    // Cache all elements, regardless of whether they are control or content elements.
    cacheRequest.TreeFilter = Automation.RawViewCondition;

    // Property and pattern to cache.
    cacheRequest.Add(AutomationElement.NameProperty);
    cacheRequest.Add(SelectionItemPattern.Pattern);

    // Activate the request.
    cacheRequest.Push();

    // Obtain an element and cache the requested items.
    Condition cond = new PropertyCondition(AutomationElement.IsSelectionItemPatternAvailableProperty, true);
    AutomationElement elementListItem = elementList.FindFirst(TreeScope.Children, cond);

    // At this point, you could call another method that creates a CacheRequest and calls Push/Pop.
    // While that method was retrieving automation elements, the CacheRequest set in this method
    // would not be active.

    // Deactivate the request.
    cacheRequest.Pop();

    // Retrieve the cached property and pattern.
    String itemName = elementListItem.Cached.Name;
    SelectionItemPattern pattern = elementListItem.GetCachedPattern(SelectionItemPattern.Pattern) as SelectionItemPattern;

    // The following is an alternative way of retrieving the Name property.
    itemName = elementListItem.GetCachedPropertyValue(AutomationElement.NameProperty) as String;

    // This is yet another way, which returns AutomationElement.NotSupported if the element does
    // not supply a value. If the second parameter is false, a default name is returned.
    object objName = elementListItem.GetCachedPropertyValue(AutomationElement.NameProperty, true);
    if (objName == AutomationElement.NotSupported)
    {
        itemName = "Unknown";
    }
    else
    {
        itemName = objName as String;
    }

    // The following call raises an exception, because only the cached properties are available,
    //  as specified by cacheRequest.AutomationElementMode. If AutomationElementMode had its
    //  default value (Full), this call would be valid.
    /*** bool enabled = elementListItem.Current.IsEnabled; ***/
}

''' <summary>
''' Caches and retrieves properties for a list item by using CacheRequest.Push.
''' </summary>
''' <param name="elementList">Element from which to retrieve a child element.</param>
''' <remarks>
''' This code demonstrates various aspects of caching. It is not intended to be 
''' an example of a useful method.
''' </remarks>
Private Sub CachePropertiesByPush(ByVal elementList As AutomationElement)
    ' Set up the request.
    Dim cacheRequest As New CacheRequest()

    ' Do not get a full reference to the cached objects, only to their cached properties and patterns.
    cacheRequest.AutomationElementMode = AutomationElementMode.None

    ' Cache all elements, regardless of whether they are control or content elements.
    cacheRequest.TreeFilter = Automation.RawViewCondition

    ' Property and pattern to cache.
    cacheRequest.Add(AutomationElement.NameProperty)
    cacheRequest.Add(SelectionItemPattern.Pattern)

    ' Activate the request.
    cacheRequest.Push()

    ' Obtain an element and cache the requested items.
    Dim myCondition As New PropertyCondition(AutomationElement.IsSelectionItemPatternAvailableProperty, _
        True)
    Dim elementListItem As AutomationElement = elementList.FindFirst(TreeScope.Children, myCondition)

    ' At this point, you could call another method that creates a CacheRequest and calls Push/Pop.
    ' While that method was retrieving automation elements, the CacheRequest set in this method 
    ' would not be active. 
    ' Deactivate the request.
    cacheRequest.Pop()

    ' Retrieve the cached property and pattern.
    Dim itemName As String = elementListItem.Cached.Name
    Dim pattern As SelectionItemPattern = _
        DirectCast(elementListItem.GetCachedPattern(SelectionItemPattern.Pattern), SelectionItemPattern)

    ' The following is an alternative way of retrieving the Name property.
    itemName = CStr(elementListItem.GetCachedPropertyValue(AutomationElement.NameProperty))

    ' This is yet another way, which returns AutomationElement.NotSupported if the element does
    ' not supply a value. If the second parameter is false, a default name is returned.
    Dim objName As Object = elementListItem.GetCachedPropertyValue(AutomationElement.NameProperty, True)
    If objName Is AutomationElement.NotSupported Then
        itemName = "Unknown"
    Else
        itemName = CStr(objName)
    End If
    ' The following call raises an exception, because only the cached properties are available, 
    '  as specified by cacheRequest.AutomationElementMode. If AutomationElementMode had its
    '  default value (Full), this call would be valid.
    '** bool enabled = elementListItem.Current.IsEnabled; **

End Sub

См. также

Кэширование в клиентах автоматизации пользовательского интерфейса

Поделиться через