Уведомления о сборке мусора
В некоторых случаях полная сборка мусора (сборка объектов поколения 2) средой CLR может отрицательно сказаться на производительности. Это может быть проблема, особенно с серверами, обрабатывающими большие объемы запросов; В этом случае длинная сборка мусора может вызвать время ожидания запроса. Чтобы предотвратить полную коллекцию в критический период, можно получить уведомление о том, что полная сборка мусора приближается, а затем принять меры для перенаправления рабочей нагрузки на другой экземпляр сервера. Также вы можете самостоятельно запустить сборку мусора на экземплярах сервера, которые в текущий момент не применяются для обработки запросов.
Метод RegisterForFullGCNotification позволяет зарегистрироваться для получения уведомлений о приближении полной сборки мусора. Вы получите два уведомления: при приближении полной сборки мусора и по ее завершении.
Предупреждение
<Если элемент конфигурации gcConcurrent> включен, может вернутьсяNotApplicableGCNotificationStatus, WaitForFullGCComplete если полная сборка GC была выполнена в фоновом режиме.
Чтобы определить, когда было создано уведомление, используйте методы WaitForFullGCApproach и WaitForFullGCComplete. Как правило, они вызываются в цикле while, чтобы постоянно получать перечисление GCNotificationStatus с информацией о состоянии уведомления. Если вы получите значение Succeeded, можете выполнить следующие действия:
В ответ на уведомление, полученное с помощью метода WaitForFullGCApproach, перераспределите рабочую нагрузку и при необходимости самостоятельно запустите сборку мусора.
В ответ на уведомление, полученное с помощью метода WaitForFullGCComplete, восстановите доступность текущего экземпляра сервера для обработки запросов. Вы также можете собирать сведения. Например, метод CollectionCount позволяет зафиксировать количество сборок мусора.
Методы WaitForFullGCApproach и WaitForFullGCComplete следует использовать совместно. Вызов только одного из них может привести к непредсказуемым результатам.
Полная сборка мусора
Среда выполнения инициирует полную сборку мусора в одной из следующих ситуаций:
В состояние поколения 2 переведен достаточный объем памяти, чтобы выполнить очередную сборку мусора поколения 2.
В состояние кучи для массивных объектов переведен достаточный объем памяти, чтобы выполнить очередную сборку мусора поколения 2.
Уровень сборки мусора поколения 1 повышен до поколения 2 в силу других факторов.
Пороговые значения, указанные в методе RegisterForFullGCNotification, применяются к двум первым ситуациям. Но в первом случае вы не обязательно будете получать уведомление в момент, который точно соответствует заданному пропорциональному значению пороговых уровней. Для этого есть две причины:
в среде выполнения не проверяется каждое выделение небольших объектов (чтобы не снижать производительность);
перевод памяти в состояние поколения 2 выполняется только при сборке мусора поколения 1.
В третьем сценарии также нельзя точно определить время получения уведомлений. Этот подход не дает гарантий, он очень полезен для устранения негативных последствий несвоевременной полной сборки мусора, так как позволяет перенаправить запросы на время сборки или вызвать ее самостоятельно в более удобное время.
Параметры порогов уведомлений
Метод RegisterForFullGCNotification имеет два параметра, которые позволяют задать пороговые значения для объектов поколения 2 и кучи больших объектов. При достижении этих значений будет создаваться уведомление о сборке мусора. Эти параметры описаны в приведенной ниже таблице.
| Параметр | Описание |
|---|---|
maxGenerationThreshold |
Число от 1 до 99, которое указывает условия для создания уведомления в зависимости от объектов, переведенных в состояние поколения 2. |
largeObjectHeapThreshold |
Число от 1 до 99, которое указывает условия для создания уведомления в зависимости от объема объектов, помещенных в кучу больших объектов. |
Если вы укажете очень большое значение, вероятность получить уведомление повышается. Но вам придется довольно долго ждать, пока в среде выполнения будет вызвана сборка мусора. Если вы запустите сборку мусора самостоятельно, будет освобождено больше объектов, чем при сборке мусора, запущенной в среде выполнения.
Если вы укажете очень низкое значение, сборку мусора может запуститься в среде выполнения раньше, чем вы получите и (или) обработаете уведомление.
Пример
Description
В приведенном ниже примере группа серверов обрабатывает входящие веб-запросы. Для имитации рабочей нагрузки по обработке запросов в коллекцию List<T> добавляются массивы байтов. Каждый сервер регистрируется для получения уведомлений о сборке мусора и запускает поток с пользовательским методом WaitForFullGCProc для постоянного наблюдения за перечислением GCNotificationStatus, которое возвращают методы WaitForFullGCApproach и WaitForFullGCComplete.
Методы WaitForFullGCApproach и WaitForFullGCComplete при получении уведомлений вызывают соответствующие пользовательские методы для обработки событий.
OnFullGCApproachNotifyЭтот метод вызывает пользовательский метод
RedirectRequests, который передает на сервер очереди команду прекратить отправку запросов на свой сервер. Для имитации этого поведения переменнойbAllocateуровня класса присваивается значениеfalse. После этого выделение новых объектов прекращается.Теперь вызывается пользовательский метод
FinishExistingRequests, чтобы завершить обработку текущих запросов на сервере. Для имитации этого действия коллекция List<T> очищается.И, наконец, в период низкой нагрузки вызывается сборка мусора.
OnFullGCCompleteNotifyЭтот метод вызывает пользовательский метод
AcceptRequests, чтобы возобновить прием запросов, так как теперь серверу не угрожает полная сборка мусора. Для имитации этого поведения переменнойbAllocateуровня класса присваивается значениеtrue, чтобы новые объекты снова добавлялись в коллекцию List<T>.
Следующий код содержит метод Main для нашего примера:
using namespace System;
using namespace System::Collections::Generic;
using namespace System::Threading;
namespace GCNotify
{
ref class Program
{
private:
// Variable for continual checking in the
// While loop in the WaitForFullGCProc method.
static bool checkForNotify = false;
// Variable for suspending work
// (such servicing allocated server requests)
// after a notification is received and then
// resuming allocation after inducing a garbage collection.
static bool bAllocate = false;
// Variable for ending the example.
static bool finalExit = false;
// Collection for objects that
// simulate the server request workload.
static List<array<Byte>^>^ load = gcnew List<array<Byte>^>();
public:
static void Main()
{
try
{
// Register for a notification.
GC::RegisterForFullGCNotification(10, 10);
Console::WriteLine("Registered for GC notification.");
checkForNotify = true;
bAllocate = true;
// Start a thread using WaitForFullGCProc.
Thread^ thWaitForFullGC = gcnew Thread(gcnew ThreadStart(&WaitForFullGCProc));
thWaitForFullGC->Start();
// While the thread is checking for notifications in
// WaitForFullGCProc, create objects to simulate a server workload.
try
{
int lastCollCount = 0;
int newCollCount = 0;
while (true)
{
if (bAllocate)
{
load->Add(gcnew array<Byte>(1000));
newCollCount = GC::CollectionCount(2);
if (newCollCount != lastCollCount)
{
// Show collection count when it increases:
Console::WriteLine("Gen 2 collection count: {0}", GC::CollectionCount(2).ToString());
lastCollCount = newCollCount;
}
// For ending the example (arbitrary).
if (newCollCount == 500)
{
finalExit = true;
checkForNotify = false;
break;
}
}
}
}
catch (OutOfMemoryException^)
{
Console::WriteLine("Out of memory.");
}
finalExit = true;
checkForNotify = false;
GC::CancelFullGCNotification();
}
catch (InvalidOperationException^ invalidOp)
{
Console::WriteLine("GC Notifications are not supported while concurrent GC is enabled.\n"
+ invalidOp->Message);
}
}
public:
static void OnFullGCApproachNotify()
{
Console::WriteLine("Redirecting requests.");
// Method that tells the request queuing
// server to not direct requests to this server.
RedirectRequests();
// Method that provides time to
// finish processing pending requests.
FinishExistingRequests();
// This is a good time to induce a GC collection
// because the runtime will induce a full GC soon.
// To be very careful, you can check precede with a
// check of the GC.GCCollectionCount to make sure
// a full GC did not already occur since last notified.
GC::Collect();
Console::WriteLine("Induced a collection.");
}
public:
static void OnFullGCCompleteEndNotify()
{
// Method that informs the request queuing server
// that this server is ready to accept requests again.
AcceptRequests();
Console::WriteLine("Accepting requests again.");
}
public:
static void WaitForFullGCProc()
{
while (true)
{
// CheckForNotify is set to true and false in Main.
while (checkForNotify)
{
// Check for a notification of an approaching collection.
GCNotificationStatus s = GC::WaitForFullGCApproach();
if (s == GCNotificationStatus::Succeeded)
{
Console::WriteLine("GC Notification raised.");
OnFullGCApproachNotify();
}
else if (s == GCNotificationStatus::Canceled)
{
Console::WriteLine("GC Notification cancelled.");
break;
}
else
{
// This can occur if a timeout period
// is specified for WaitForFullGCApproach(Timeout)
// or WaitForFullGCComplete(Timeout)
// and the time out period has elapsed.
Console::WriteLine("GC Notification not applicable.");
break;
}
// Check for a notification of a completed collection.
s = GC::WaitForFullGCComplete();
if (s == GCNotificationStatus::Succeeded)
{
Console::WriteLine("GC Notification raised.");
OnFullGCCompleteEndNotify();
}
else if (s == GCNotificationStatus::Canceled)
{
Console::WriteLine("GC Notification cancelled.");
break;
}
else
{
// Could be a time out.
Console::WriteLine("GC Notification not applicable.");
break;
}
}
Thread::Sleep(500);
// FinalExit is set to true right before
// the main thread cancelled notification.
if (finalExit)
{
break;
}
}
}
private:
static void RedirectRequests()
{
// Code that sends requests
// to other servers.
// Suspend work.
bAllocate = false;
}
static void FinishExistingRequests()
{
// Code that waits a period of time
// for pending requests to finish.
// Clear the simulated workload.
load->Clear();
}
static void AcceptRequests()
{
// Code that resumes processing
// requests on this server.
// Resume work.
bAllocate = true;
}
};
}
int main()
{
GCNotify::Program::Main();
}
public static void Main(string[] args)
{
try
{
// Register for a notification.
GC.RegisterForFullGCNotification(10, 10);
Console.WriteLine("Registered for GC notification.");
checkForNotify = true;
bAllocate = true;
// Start a thread using WaitForFullGCProc.
Thread thWaitForFullGC = new Thread(new ThreadStart(WaitForFullGCProc));
thWaitForFullGC.Start();
// While the thread is checking for notifications in
// WaitForFullGCProc, create objects to simulate a server workload.
try
{
int lastCollCount = 0;
int newCollCount = 0;
while (true)
{
if (bAllocate)
{
load.Add(new byte[1000]);
newCollCount = GC.CollectionCount(2);
if (newCollCount != lastCollCount)
{
// Show collection count when it increases:
Console.WriteLine("Gen 2 collection count: {0}", GC.CollectionCount(2).ToString());
lastCollCount = newCollCount;
}
// For ending the example (arbitrary).
if (newCollCount == 500)
{
finalExit = true;
checkForNotify = false;
break;
}
}
}
}
catch (OutOfMemoryException)
{
Console.WriteLine("Out of memory.");
}
finalExit = true;
checkForNotify = false;
GC.CancelFullGCNotification();
}
catch (InvalidOperationException invalidOp)
{
Console.WriteLine("GC Notifications are not supported while concurrent GC is enabled.\n"
+ invalidOp.Message);
}
}
Imports System.Collections.Generic
Imports System.Threading
Class Program
' Variables for continual checking in the
' While loop in the WaitForFullGcProc method.
Private Shared checkForNotify As Boolean = False
' Variable for suspending work
' (such as servicing allocated server requests)
' after a notification is received and then
' resuming allocation after inducing a garbage collection.
Private Shared bAllocate As Boolean = False
' Variable for ending the example.
Private Shared finalExit As Boolean = False
' Collection for objects that
' simulate the server request workload.
Private Shared load As New List(Of Byte())
Public Shared Sub Main(ByVal args() As String)
Try
' Register for a notification.
GC.RegisterForFullGCNotification(10, 10)
Console.WriteLine("Registered for GC notification.")
bAllocate = True
checkForNotify = True
' Start a thread using WaitForFullGCProc.
Dim thWaitForFullGC As Thread = _
New Thread(New ThreadStart(AddressOf WaitForFullGCProc))
thWaitForFullGC.Start()
' While the thread is checking for notifications in
' WaitForFullGCProc, create objects to simulate a server workload.
Try
Dim lastCollCount As Integer = 0
Dim newCollCount As Integer = 0
While (True)
If bAllocate = True Then
load.Add(New Byte(1000) {})
newCollCount = GC.CollectionCount(2)
If (newCollCount <> lastCollCount) Then
' Show collection count when it increases:
Console.WriteLine("Gen 2 collection count: {0}", _
GC.CollectionCount(2).ToString)
lastCollCount = newCollCount
End If
' For ending the example (arbitrary).
If newCollCount = 500 Then
finalExit = True
checkForNotify = False
bAllocate = False
Exit While
End If
End If
End While
Catch outofMem As OutOfMemoryException
Console.WriteLine("Out of memory.")
End Try
finalExit = True
checkForNotify = False
GC.CancelFullGCNotification()
Catch invalidOp As InvalidOperationException
Console.WriteLine("GC Notifications are not supported while concurrent GC is enabled." _
& vbLf & invalidOp.Message)
End Try
End Sub
Public Shared Sub OnFullGCApproachNotify()
Console.WriteLine("Redirecting requests.")
' Method that tells the request queuing
' server to not direct requests to this server.
RedirectRequests()
' Method that provides time to
' finish processing pending requests.
FinishExistingRequests()
' This is a good time to induce a GC collection
' because the runtime will induce a ful GC soon.
' To be very careful, you can check precede with a
' check of the GC.GCCollectionCount to make sure
' a full GC did not already occur since last notified.
GC.Collect()
Console.WriteLine("Induced a collection.")
End Sub
Public Shared Sub OnFullGCCompleteEndNotify()
' Method that informs the request queuing server
' that this server is ready to accept requests again.
AcceptRequests()
Console.WriteLine("Accepting requests again.")
End Sub
Public Shared Sub WaitForFullGCProc()
While True
' CheckForNotify is set to true and false in Main.
While checkForNotify
' Check for a notification of an approaching collection.
Dim s As GCNotificationStatus = GC.WaitForFullGCApproach
If (s = GCNotificationStatus.Succeeded) Then
Console.WriteLine("GC Notification raised.")
OnFullGCApproachNotify()
ElseIf (s = GCNotificationStatus.Canceled) Then
Console.WriteLine("GC Notification cancelled.")
Exit While
Else
' This can occur if a timeout period
' is specified for WaitForFullGCApproach(Timeout)
' or WaitForFullGCComplete(Timeout)
' and the time out period has elapsed.
Console.WriteLine("GC Notification not applicable.")
Exit While
End If
' Check for a notification of a completed collection.
s = GC.WaitForFullGCComplete
If (s = GCNotificationStatus.Succeeded) Then
Console.WriteLine("GC Notification raised.")
OnFullGCCompleteEndNotify()
ElseIf (s = GCNotificationStatus.Canceled) Then
Console.WriteLine("GC Notification cancelled.")
Exit While
Else
' Could be a time out.
Console.WriteLine("GC Notification not applicable.")
Exit While
End If
End While
Thread.Sleep(500)
' FinalExit is set to true right before
' the main thread cancelled notification.
If finalExit Then
Exit While
End If
End While
End Sub
Private Shared Sub RedirectRequests()
' Code that sends requests
' to other servers.
' Suspend work.
bAllocate = False
End Sub
Private Shared Sub FinishExistingRequests()
' Code that waits a period of time
' for pending requests to finish.
' Clear the simulated workload.
load.Clear()
End Sub
Private Shared Sub AcceptRequests()
' Code that resumes processing
' requests on this server.
' Resume work.
bAllocate = True
End Sub
End Class
Следующий код содержит пользовательский метод WaitForFullGCProc, при помощи которого выполняется непрерывный цикл проверки уведомлений о сборке мусора:
public:
static void WaitForFullGCProc()
{
while (true)
{
// CheckForNotify is set to true and false in Main.
while (checkForNotify)
{
// Check for a notification of an approaching collection.
GCNotificationStatus s = GC::WaitForFullGCApproach();
if (s == GCNotificationStatus::Succeeded)
{
Console::WriteLine("GC Notification raised.");
OnFullGCApproachNotify();
}
else if (s == GCNotificationStatus::Canceled)
{
Console::WriteLine("GC Notification cancelled.");
break;
}
else
{
// This can occur if a timeout period
// is specified for WaitForFullGCApproach(Timeout)
// or WaitForFullGCComplete(Timeout)
// and the time out period has elapsed.
Console::WriteLine("GC Notification not applicable.");
break;
}
// Check for a notification of a completed collection.
s = GC::WaitForFullGCComplete();
if (s == GCNotificationStatus::Succeeded)
{
Console::WriteLine("GC Notification raised.");
OnFullGCCompleteEndNotify();
}
else if (s == GCNotificationStatus::Canceled)
{
Console::WriteLine("GC Notification cancelled.");
break;
}
else
{
// Could be a time out.
Console::WriteLine("GC Notification not applicable.");
break;
}
}
Thread::Sleep(500);
// FinalExit is set to true right before
// the main thread cancelled notification.
if (finalExit)
{
break;
}
}
}
public static void WaitForFullGCProc()
{
while (true)
{
// CheckForNotify is set to true and false in Main.
while (checkForNotify)
{
// Check for a notification of an approaching collection.
GCNotificationStatus s = GC.WaitForFullGCApproach();
if (s == GCNotificationStatus.Succeeded)
{
Console.WriteLine("GC Notification raised.");
OnFullGCApproachNotify();
}
else if (s == GCNotificationStatus.Canceled)
{
Console.WriteLine("GC Notification cancelled.");
break;
}
else
{
// This can occur if a timeout period
// is specified for WaitForFullGCApproach(Timeout)
// or WaitForFullGCComplete(Timeout)
// and the time out period has elapsed.
Console.WriteLine("GC Notification not applicable.");
break;
}
// Check for a notification of a completed collection.
GCNotificationStatus status = GC.WaitForFullGCComplete();
if (status == GCNotificationStatus.Succeeded)
{
Console.WriteLine("GC Notification raised.");
OnFullGCCompleteEndNotify();
}
else if (status == GCNotificationStatus.Canceled)
{
Console.WriteLine("GC Notification cancelled.");
break;
}
else
{
// Could be a time out.
Console.WriteLine("GC Notification not applicable.");
break;
}
}
Thread.Sleep(500);
// FinalExit is set to true right before
// the main thread cancelled notification.
if (finalExit)
{
break;
}
}
}
Public Shared Sub WaitForFullGCProc()
While True
' CheckForNotify is set to true and false in Main.
While checkForNotify
' Check for a notification of an approaching collection.
Dim s As GCNotificationStatus = GC.WaitForFullGCApproach
If (s = GCNotificationStatus.Succeeded) Then
Console.WriteLine("GC Notification raised.")
OnFullGCApproachNotify()
ElseIf (s = GCNotificationStatus.Canceled) Then
Console.WriteLine("GC Notification cancelled.")
Exit While
Else
' This can occur if a timeout period
' is specified for WaitForFullGCApproach(Timeout)
' or WaitForFullGCComplete(Timeout)
' and the time out period has elapsed.
Console.WriteLine("GC Notification not applicable.")
Exit While
End If
' Check for a notification of a completed collection.
s = GC.WaitForFullGCComplete
If (s = GCNotificationStatus.Succeeded) Then
Console.WriteLine("GC Notification raised.")
OnFullGCCompleteEndNotify()
ElseIf (s = GCNotificationStatus.Canceled) Then
Console.WriteLine("GC Notification cancelled.")
Exit While
Else
' Could be a time out.
Console.WriteLine("GC Notification not applicable.")
Exit While
End If
End While
Thread.Sleep(500)
' FinalExit is set to true right before
' the main thread cancelled notification.
If finalExit Then
Exit While
End If
End While
End Sub
Следующий код содержит метод OnFullGCApproachNotify, вызываемый из
Метод WaitForFullGCProc.
public:
static void OnFullGCApproachNotify()
{
Console::WriteLine("Redirecting requests.");
// Method that tells the request queuing
// server to not direct requests to this server.
RedirectRequests();
// Method that provides time to
// finish processing pending requests.
FinishExistingRequests();
// This is a good time to induce a GC collection
// because the runtime will induce a full GC soon.
// To be very careful, you can check precede with a
// check of the GC.GCCollectionCount to make sure
// a full GC did not already occur since last notified.
GC::Collect();
Console::WriteLine("Induced a collection.");
}
public static void OnFullGCApproachNotify()
{
Console.WriteLine("Redirecting requests.");
// Method that tells the request queuing
// server to not direct requests to this server.
RedirectRequests();
// Method that provides time to
// finish processing pending requests.
FinishExistingRequests();
// This is a good time to induce a GC collection
// because the runtime will induce a full GC soon.
// To be very careful, you can check precede with a
// check of the GC.GCCollectionCount to make sure
// a full GC did not already occur since last notified.
GC.Collect();
Console.WriteLine("Induced a collection.");
}
Public Shared Sub OnFullGCApproachNotify()
Console.WriteLine("Redirecting requests.")
' Method that tells the request queuing
' server to not direct requests to this server.
RedirectRequests()
' Method that provides time to
' finish processing pending requests.
FinishExistingRequests()
' This is a good time to induce a GC collection
' because the runtime will induce a ful GC soon.
' To be very careful, you can check precede with a
' check of the GC.GCCollectionCount to make sure
' a full GC did not already occur since last notified.
GC.Collect()
Console.WriteLine("Induced a collection.")
End Sub
Следующий код содержит метод OnFullGCApproachComplete, вызываемый из
Метод WaitForFullGCProc.
public:
static void OnFullGCCompleteEndNotify()
{
// Method that informs the request queuing server
// that this server is ready to accept requests again.
AcceptRequests();
Console::WriteLine("Accepting requests again.");
}
public static void OnFullGCCompleteEndNotify()
{
// Method that informs the request queuing server
// that this server is ready to accept requests again.
AcceptRequests();
Console.WriteLine("Accepting requests again.");
}
Public Shared Sub OnFullGCCompleteEndNotify()
' Method that informs the request queuing server
' that this server is ready to accept requests again.
AcceptRequests()
Console.WriteLine("Accepting requests again.")
End Sub
Приведенный ниже код содержит пользовательские методы, которые вызываются из методов OnFullGCApproachNotify и OnFullGCCompleteNotify. Пользовательские методы позволяют перенаправить запросы, завершить обработку существующих запросов и возобновить прием запросов после полной сборки мусора.
private:
static void RedirectRequests()
{
// Code that sends requests
// to other servers.
// Suspend work.
bAllocate = false;
}
static void FinishExistingRequests()
{
// Code that waits a period of time
// for pending requests to finish.
// Clear the simulated workload.
load->Clear();
}
static void AcceptRequests()
{
// Code that resumes processing
// requests on this server.
// Resume work.
bAllocate = true;
}
private static void RedirectRequests()
{
// Code that sends requests
// to other servers.
// Suspend work.
bAllocate = false;
}
private static void FinishExistingRequests()
{
// Code that waits a period of time
// for pending requests to finish.
// Clear the simulated workload.
load.Clear();
}
private static void AcceptRequests()
{
// Code that resumes processing
// requests on this server.
// Resume work.
bAllocate = true;
}
Private Shared Sub RedirectRequests()
' Code that sends requests
' to other servers.
' Suspend work.
bAllocate = False
End Sub
Private Shared Sub FinishExistingRequests()
' Code that waits a period of time
' for pending requests to finish.
' Clear the simulated workload.
load.Clear()
End Sub
Private Shared Sub AcceptRequests()
' Code that resumes processing
' requests on this server.
' Resume work.
bAllocate = True
End Sub
Полный пример кода выглядит следующим образом:
using namespace System;
using namespace System::Collections::Generic;
using namespace System::Threading;
namespace GCNotify
{
ref class Program
{
private:
// Variable for continual checking in the
// While loop in the WaitForFullGCProc method.
static bool checkForNotify = false;
// Variable for suspending work
// (such servicing allocated server requests)
// after a notification is received and then
// resuming allocation after inducing a garbage collection.
static bool bAllocate = false;
// Variable for ending the example.
static bool finalExit = false;
// Collection for objects that
// simulate the server request workload.
static List<array<Byte>^>^ load = gcnew List<array<Byte>^>();
public:
static void Main()
{
try
{
// Register for a notification.
GC::RegisterForFullGCNotification(10, 10);
Console::WriteLine("Registered for GC notification.");
checkForNotify = true;
bAllocate = true;
// Start a thread using WaitForFullGCProc.
Thread^ thWaitForFullGC = gcnew Thread(gcnew ThreadStart(&WaitForFullGCProc));
thWaitForFullGC->Start();
// While the thread is checking for notifications in
// WaitForFullGCProc, create objects to simulate a server workload.
try
{
int lastCollCount = 0;
int newCollCount = 0;
while (true)
{
if (bAllocate)
{
load->Add(gcnew array<Byte>(1000));
newCollCount = GC::CollectionCount(2);
if (newCollCount != lastCollCount)
{
// Show collection count when it increases:
Console::WriteLine("Gen 2 collection count: {0}", GC::CollectionCount(2).ToString());
lastCollCount = newCollCount;
}
// For ending the example (arbitrary).
if (newCollCount == 500)
{
finalExit = true;
checkForNotify = false;
break;
}
}
}
}
catch (OutOfMemoryException^)
{
Console::WriteLine("Out of memory.");
}
finalExit = true;
checkForNotify = false;
GC::CancelFullGCNotification();
}
catch (InvalidOperationException^ invalidOp)
{
Console::WriteLine("GC Notifications are not supported while concurrent GC is enabled.\n"
+ invalidOp->Message);
}
}
public:
static void OnFullGCApproachNotify()
{
Console::WriteLine("Redirecting requests.");
// Method that tells the request queuing
// server to not direct requests to this server.
RedirectRequests();
// Method that provides time to
// finish processing pending requests.
FinishExistingRequests();
// This is a good time to induce a GC collection
// because the runtime will induce a full GC soon.
// To be very careful, you can check precede with a
// check of the GC.GCCollectionCount to make sure
// a full GC did not already occur since last notified.
GC::Collect();
Console::WriteLine("Induced a collection.");
}
public:
static void OnFullGCCompleteEndNotify()
{
// Method that informs the request queuing server
// that this server is ready to accept requests again.
AcceptRequests();
Console::WriteLine("Accepting requests again.");
}
public:
static void WaitForFullGCProc()
{
while (true)
{
// CheckForNotify is set to true and false in Main.
while (checkForNotify)
{
// Check for a notification of an approaching collection.
GCNotificationStatus s = GC::WaitForFullGCApproach();
if (s == GCNotificationStatus::Succeeded)
{
Console::WriteLine("GC Notification raised.");
OnFullGCApproachNotify();
}
else if (s == GCNotificationStatus::Canceled)
{
Console::WriteLine("GC Notification cancelled.");
break;
}
else
{
// This can occur if a timeout period
// is specified for WaitForFullGCApproach(Timeout)
// or WaitForFullGCComplete(Timeout)
// and the time out period has elapsed.
Console::WriteLine("GC Notification not applicable.");
break;
}
// Check for a notification of a completed collection.
s = GC::WaitForFullGCComplete();
if (s == GCNotificationStatus::Succeeded)
{
Console::WriteLine("GC Notification raised.");
OnFullGCCompleteEndNotify();
}
else if (s == GCNotificationStatus::Canceled)
{
Console::WriteLine("GC Notification cancelled.");
break;
}
else
{
// Could be a time out.
Console::WriteLine("GC Notification not applicable.");
break;
}
}
Thread::Sleep(500);
// FinalExit is set to true right before
// the main thread cancelled notification.
if (finalExit)
{
break;
}
}
}
private:
static void RedirectRequests()
{
// Code that sends requests
// to other servers.
// Suspend work.
bAllocate = false;
}
static void FinishExistingRequests()
{
// Code that waits a period of time
// for pending requests to finish.
// Clear the simulated workload.
load->Clear();
}
static void AcceptRequests()
{
// Code that resumes processing
// requests on this server.
// Resume work.
bAllocate = true;
}
};
}
int main()
{
GCNotify::Program::Main();
}
using System;
using System.Collections.Generic;
using System.Threading;
namespace GCNotify
{
class Program
{
// Variable for continual checking in the
// While loop in the WaitForFullGCProc method.
static bool checkForNotify = false;
// Variable for suspending work
// (such servicing allocated server requests)
// after a notification is received and then
// resuming allocation after inducing a garbage collection.
static bool bAllocate = false;
// Variable for ending the example.
static bool finalExit = false;
// Collection for objects that
// simulate the server request workload.
static List<byte[]> load = new List<byte[]>();
public static void Main(string[] args)
{
try
{
// Register for a notification.
GC.RegisterForFullGCNotification(10, 10);
Console.WriteLine("Registered for GC notification.");
checkForNotify = true;
bAllocate = true;
// Start a thread using WaitForFullGCProc.
Thread thWaitForFullGC = new Thread(new ThreadStart(WaitForFullGCProc));
thWaitForFullGC.Start();
// While the thread is checking for notifications in
// WaitForFullGCProc, create objects to simulate a server workload.
try
{
int lastCollCount = 0;
int newCollCount = 0;
while (true)
{
if (bAllocate)
{
load.Add(new byte[1000]);
newCollCount = GC.CollectionCount(2);
if (newCollCount != lastCollCount)
{
// Show collection count when it increases:
Console.WriteLine("Gen 2 collection count: {0}", GC.CollectionCount(2).ToString());
lastCollCount = newCollCount;
}
// For ending the example (arbitrary).
if (newCollCount == 500)
{
finalExit = true;
checkForNotify = false;
break;
}
}
}
}
catch (OutOfMemoryException)
{
Console.WriteLine("Out of memory.");
}
finalExit = true;
checkForNotify = false;
GC.CancelFullGCNotification();
}
catch (InvalidOperationException invalidOp)
{
Console.WriteLine("GC Notifications are not supported while concurrent GC is enabled.\n"
+ invalidOp.Message);
}
}
public static void OnFullGCApproachNotify()
{
Console.WriteLine("Redirecting requests.");
// Method that tells the request queuing
// server to not direct requests to this server.
RedirectRequests();
// Method that provides time to
// finish processing pending requests.
FinishExistingRequests();
// This is a good time to induce a GC collection
// because the runtime will induce a full GC soon.
// To be very careful, you can check precede with a
// check of the GC.GCCollectionCount to make sure
// a full GC did not already occur since last notified.
GC.Collect();
Console.WriteLine("Induced a collection.");
}
public static void OnFullGCCompleteEndNotify()
{
// Method that informs the request queuing server
// that this server is ready to accept requests again.
AcceptRequests();
Console.WriteLine("Accepting requests again.");
}
public static void WaitForFullGCProc()
{
while (true)
{
// CheckForNotify is set to true and false in Main.
while (checkForNotify)
{
// Check for a notification of an approaching collection.
GCNotificationStatus s = GC.WaitForFullGCApproach();
if (s == GCNotificationStatus.Succeeded)
{
Console.WriteLine("GC Notification raised.");
OnFullGCApproachNotify();
}
else if (s == GCNotificationStatus.Canceled)
{
Console.WriteLine("GC Notification cancelled.");
break;
}
else
{
// This can occur if a timeout period
// is specified for WaitForFullGCApproach(Timeout)
// or WaitForFullGCComplete(Timeout)
// and the time out period has elapsed.
Console.WriteLine("GC Notification not applicable.");
break;
}
// Check for a notification of a completed collection.
GCNotificationStatus status = GC.WaitForFullGCComplete();
if (status == GCNotificationStatus.Succeeded)
{
Console.WriteLine("GC Notification raised.");
OnFullGCCompleteEndNotify();
}
else if (status == GCNotificationStatus.Canceled)
{
Console.WriteLine("GC Notification cancelled.");
break;
}
else
{
// Could be a time out.
Console.WriteLine("GC Notification not applicable.");
break;
}
}
Thread.Sleep(500);
// FinalExit is set to true right before
// the main thread cancelled notification.
if (finalExit)
{
break;
}
}
}
private static void RedirectRequests()
{
// Code that sends requests
// to other servers.
// Suspend work.
bAllocate = false;
}
private static void FinishExistingRequests()
{
// Code that waits a period of time
// for pending requests to finish.
// Clear the simulated workload.
load.Clear();
}
private static void AcceptRequests()
{
// Code that resumes processing
// requests on this server.
// Resume work.
bAllocate = true;
}
}
}
Imports System.Collections.Generic
Imports System.Threading
Class Program
' Variables for continual checking in the
' While loop in the WaitForFullGcProc method.
Private Shared checkForNotify As Boolean = False
' Variable for suspending work
' (such as servicing allocated server requests)
' after a notification is received and then
' resuming allocation after inducing a garbage collection.
Private Shared bAllocate As Boolean = False
' Variable for ending the example.
Private Shared finalExit As Boolean = False
' Collection for objects that
' simulate the server request workload.
Private Shared load As New List(Of Byte())
Public Shared Sub Main(ByVal args() As String)
Try
' Register for a notification.
GC.RegisterForFullGCNotification(10, 10)
Console.WriteLine("Registered for GC notification.")
bAllocate = True
checkForNotify = True
' Start a thread using WaitForFullGCProc.
Dim thWaitForFullGC As Thread = _
New Thread(New ThreadStart(AddressOf WaitForFullGCProc))
thWaitForFullGC.Start()
' While the thread is checking for notifications in
' WaitForFullGCProc, create objects to simulate a server workload.
Try
Dim lastCollCount As Integer = 0
Dim newCollCount As Integer = 0
While (True)
If bAllocate = True Then
load.Add(New Byte(1000) {})
newCollCount = GC.CollectionCount(2)
If (newCollCount <> lastCollCount) Then
' Show collection count when it increases:
Console.WriteLine("Gen 2 collection count: {0}", _
GC.CollectionCount(2).ToString)
lastCollCount = newCollCount
End If
' For ending the example (arbitrary).
If newCollCount = 500 Then
finalExit = True
checkForNotify = False
bAllocate = False
Exit While
End If
End If
End While
Catch outofMem As OutOfMemoryException
Console.WriteLine("Out of memory.")
End Try
finalExit = True
checkForNotify = False
GC.CancelFullGCNotification()
Catch invalidOp As InvalidOperationException
Console.WriteLine("GC Notifications are not supported while concurrent GC is enabled." _
& vbLf & invalidOp.Message)
End Try
End Sub
Public Shared Sub OnFullGCApproachNotify()
Console.WriteLine("Redirecting requests.")
' Method that tells the request queuing
' server to not direct requests to this server.
RedirectRequests()
' Method that provides time to
' finish processing pending requests.
FinishExistingRequests()
' This is a good time to induce a GC collection
' because the runtime will induce a ful GC soon.
' To be very careful, you can check precede with a
' check of the GC.GCCollectionCount to make sure
' a full GC did not already occur since last notified.
GC.Collect()
Console.WriteLine("Induced a collection.")
End Sub
Public Shared Sub OnFullGCCompleteEndNotify()
' Method that informs the request queuing server
' that this server is ready to accept requests again.
AcceptRequests()
Console.WriteLine("Accepting requests again.")
End Sub
Public Shared Sub WaitForFullGCProc()
While True
' CheckForNotify is set to true and false in Main.
While checkForNotify
' Check for a notification of an approaching collection.
Dim s As GCNotificationStatus = GC.WaitForFullGCApproach
If (s = GCNotificationStatus.Succeeded) Then
Console.WriteLine("GC Notification raised.")
OnFullGCApproachNotify()
ElseIf (s = GCNotificationStatus.Canceled) Then
Console.WriteLine("GC Notification cancelled.")
Exit While
Else
' This can occur if a timeout period
' is specified for WaitForFullGCApproach(Timeout)
' or WaitForFullGCComplete(Timeout)
' and the time out period has elapsed.
Console.WriteLine("GC Notification not applicable.")
Exit While
End If
' Check for a notification of a completed collection.
s = GC.WaitForFullGCComplete
If (s = GCNotificationStatus.Succeeded) Then
Console.WriteLine("GC Notification raised.")
OnFullGCCompleteEndNotify()
ElseIf (s = GCNotificationStatus.Canceled) Then
Console.WriteLine("GC Notification cancelled.")
Exit While
Else
' Could be a time out.
Console.WriteLine("GC Notification not applicable.")
Exit While
End If
End While
Thread.Sleep(500)
' FinalExit is set to true right before
' the main thread cancelled notification.
If finalExit Then
Exit While
End If
End While
End Sub
Private Shared Sub RedirectRequests()
' Code that sends requests
' to other servers.
' Suspend work.
bAllocate = False
End Sub
Private Shared Sub FinishExistingRequests()
' Code that waits a period of time
' for pending requests to finish.
' Clear the simulated workload.
load.Clear()
End Sub
Private Shared Sub AcceptRequests()
' Code that resumes processing
' requests on this server.
' Resume work.
bAllocate = True
End Sub
End Class
См. также
Совместная работа с нами на GitHub
Источник этого содержимого можно найти на GitHub, где также можно создавать и просматривать проблемы и запросы на вытягивание. Дополнительные сведения см. в нашем руководстве для участников.
Обратная связь
Ожидается в ближайшее время: в течение 2024 года мы постепенно откажемся от GitHub Issues как механизма обратной связи для контента и заменим его новой системой обратной связи. Дополнительные сведения см. в разделе https://aka.ms/ContentUserFeedback.
Отправить и просмотреть отзыв по