CIM_TapeDrive class
Represents the capabilities and management of a tape drive.
The following syntax is simplified from Managed Object Format (MOF) code and includes all of the inherited properties.
Syntax
[Abstract, Version("2.6.0"), UMLPackagePath("CIM::Device::StorageDevices")]
class CIM_TapeDrive : CIM_MediaAccessDevice
{
string InstanceID;
string Caption;
string Description;
string ElementName;
datetime InstallDate;
string Name;
uint16 OperationalStatus[];
string StatusDescriptions[];
string Status;
uint16 HealthState;
uint16 CommunicationStatus;
uint16 DetailedStatus;
uint16 OperatingStatus;
uint16 PrimaryStatus;
uint16 EnabledState = 5;
string OtherEnabledState;
uint16 RequestedState = 12;
uint16 EnabledDefault = 2;
datetime TimeOfLastStateChange;
uint16 AvailableRequestedStates[];
uint16 TransitioningToState = 12;
string SystemCreationClassName;
string SystemName;
string CreationClassName;
string DeviceID;
boolean PowerManagementSupported;
uint16 PowerManagementCapabilities[];
uint16 Availability;
uint16 StatusInfo;
uint32 LastErrorCode;
string ErrorDescription;
boolean ErrorCleared;
string OtherIdentifyingInfo[];
uint64 PowerOnHours;
uint64 TotalPowerOnHours;
string IdentifyingDescriptions[];
uint16 AdditionalAvailability[];
uint64 MaxQuiesceTime;
uint16 Capabilities[];
string CapabilityDescriptions[];
string ErrorMethodology;
string CompressionMethod;
uint32 NumberOfMediaSupported;
uint64 MaxMediaSize;
uint64 DefaultBlockSize;
uint64 MaxBlockSize;
uint64 MinBlockSize;
boolean NeedsCleaning;
boolean MediaIsLocked;
uint16 Security;
datetime LastCleaned;
uint64 MaxAccessTime;
uint32 UncompressedDataRate;
uint64 LoadTime;
uint64 UnloadTime;
uint64 MountCount;
datetime TimeOfLastMount;
uint64 TotalMountTime;
string UnitsDescription;
uint64 MaxUnitsBeforeCleaning;
uint64 UnitsUsed;
uint32 EOTWarningZoneSize;
uint32 MaxPartitionCount;
uint32 Padding;
uint64 MaxRewindTime;
};
Members
The CIM_TapeDrive class has these types of members:
Methods
The CIM_TapeDrive class has these methods.
| Method | Description |
|---|---|
| EnableDevice | Deprecated description: Enables or disables the logical device. This method is deprecated. Instead we recommend that you use the RequestStateChange method. This method is inherited from CIM_LogicalDevice. |
| LockMedia | Locks and unlocks removable media in a media access device. This method is inherited from CIM_MediaAccessDevice. |
| OnlineDevice | Deprecated description: Brings the logical device online so it can accept requests, or offline so it can no longer accept requests. This method is deprecated. Instead we recommend that you use the RequestStateChange method. This method is inherited from CIM_LogicalDevice. |
| QuiesceDevice | Deprecated description: Temporarily suspends activity on the logical device, or re-enables the activity. This method is deprecated. Instead we recommend that you use the RequestStateChange method. This method is inherited from CIM_LogicalDevice. |
| RequestStateChange | Requests that the state of the element be changed to the specified value. This method is inherited from CIM_EnabledLogicalElement. |
| Reset | Resets the logical device. This method is inherited from CIM_LogicalDevice. |
| RestoreProperties | Restores a previous configuration and state of the logical device. This method is inherited from CIM_LogicalDevice. |
| SaveProperties | Saves the configuration and state of the logical device. This method is inherited from CIM_LogicalDevice. |
| SetPowerState | Deprecated description: Sets the power state of the logical device. Instead we recommend that you use the SetPowerState property of the CIM_PowerManagementService class. This method is inherited from CIM_LogicalDevice. |
Properties
The CIM_TapeDrive class has these properties.
-
AdditionalAvailability
-
-
Data type: uint16 array
-
Access type: Read-only
-
Qualifiers: ModelCorrespondence ("CIM_LogicalDevice.Availability")
An array that contains availability information about of the logical device, in addition to the that of the Availability property.
This property is inherited from CIM_LogicalDevice.
The possible values are:
-
-
Other (1)
-
Unknown (2)
-
Running/Full Power (3)
-
Warning (4)
-
In Test (5)
-
Not Applicable (6)
-
Power Off (7)
-
Off Line (8)
-
Off Duty (9)
-
Degraded (10)
-
Not Installed (11)
-
Install Error (12)
-
Power Save - Unknown (13)
-
Power Save - Low Power Mode (14)
-
Power Save - Standby (15)
-
Power Cycle (16)
-
Power Save - Warning (17)
-
Paused (18)
-
Not Ready (19)
-
Not Configured (20)
-
Quiesced (21)
-
Quiescent
Availability
-
Data type: uint16
-
Access type: Read-only
-
Qualifiers: MappingStrings ("MIF.DMTF|Operational State|006.5", "MIB.IETF|HOST-RESOURCES-MIB.hrDeviceStatus", "MIF.DMTF|Host Device|001.5"), ModelCorrespondence ("CIM_LogicalDevice.AdditionalAvailability")
Deprecated description: Contains the availability of the logical device.
This property is deprecated. Instead we recommend that you use the CIM_PowerManagementCapabilities class.
This property is inherited from CIM_LogicalDevice.
This property contains the following values:
Other (1)
Unknown (2)
Running/Full Power (3)
Warning (4)
In Test (5)
Not Applicable (6)
Power Off (7)
Off Line (8)
Off Duty (9)
Degraded (10)
Not Installed (11)
Install Error (12)
Power Save - Unknown (13)
Power Save - Low Power Mode (14)
Power Save - Standby (15)
Power Cycle (16)
Power Save - Warning (17)
Paused (18)
Not Ready (19)
Not Configured (20)
Quiesced (21)
AvailableRequestedStates
-
Data type: uint16 array
-
Access type: Read-only
-
Qualifiers: ModelCorrespondence ("CIM_EnabledLogicalElement.RequestStateChange", "CIM_EnabledLogicalElementCapabilities.RequestedStatesSupported")
Indicates the possible values for the RequestedState parameter of the RequestStateChange method.
The listed values must be a subset of the values that are contained in the RequestedStatesSupported property of the associated CIM_EnabledLogicalElementCapabilities instance. This property is NULL if the implementation cannot determine the set of possible values for the current state of the element.
This property is inherited from CIM_EnabledLogicalElement.
The possible values are.
Enabled (2)
Disabled (3)
Shut Down (4)
Offline (6)
Test (7)
Defer (8)
Quiesce (9)
Reboot (10)
Reset (11)
DMTF Reserved
Capabilities
-
Data type: uint16 array
-
Access type: Read-only
-
Qualifiers: ArrayType ("Indexed"), MappingStrings ("MIF.DMTF|Storage Devices|001.9", "MIF.DMTF|Storage Devices|001.11", "MIF.DMTF|Storage Devices|001.12", "MIF.DMTF|Disks|003.7", "MIF.DMTF|Host Disk|001.2", "MIF.DMTF|Host Disk|001.4"), ModelCorrespondence ("CIM_MediaAccessDevice.CapabilityDescriptions")
An array that contains the capabilities of the media access device.
This property is inherited from CIM_MediaAccessDevice.
Unknown (0)
Other (1)
Sequential Access (2)
Random Access (3)
Supports Writing (4)
Encryption (5)
Compression (6)
Supports Removeable Media (7)
Manual Cleaning (8)
Automatic Cleaning (9)
SMART Notification (10)
Supports Dual Sided Media (11)
Predismount Eject Not Required (12)
CapabilityDescriptions
-
Data type: string array
-
Access type: Read-only
-
Qualifiers: ArrayType ("Indexed"), ModelCorrespondence ("CIM_MediaAccessDevice.Capabilities")
An array of feature descriptions for the items in the Capabilities array.
This property is inherited from CIM_MediaAccessDevice.
Caption
-
Data type: string
-
Access type: Read-only
-
Qualifiers: MaxLen (64)
A short textual description of the object.
This property is inherited from CIM_ManagedElement.
CommunicationStatus
-
Data type: uint16
-
Access type: Read-only
Indicates the ability of the instrumentation to communicate with this element. A NULL value indicates that instrumentation does not support this property.
This property is inherited from CIM_ManagedSystemElement.
Unknown (0)
Indicates that the instrumentation cannot report on the CommunicationStatus property at this time.
Not Available (1)
Indicates that the instrumentation is capable of reporting this property, but intentionally does not for this element.
Communication OK (2)
Indicates only that communication is established with the element.
Lost Communication (3)
Indicates that the element has been contacted in the past, but is currently unreachable.
No Contact (4)
Indicates that the instrumentation has contact information for this element, but has never been able to communicate with it.
DMTF Reserved
Reserved.
Vendor Reserved
Reserved.
CompressionMethod
-
Data type: string
-
Access type: Read-only
The name of the algorithm or tool used by the device to support compression.
If a compression type is not specified, one of the following values can be used:
- "Unknown" compression support is unknown or not specified.
- "Compressed" compression is supported but the type is unknown or unspecified.
- "Not Compressed" the device does not support compression capabilities.
This property is inherited from CIM_MediaAccessDevice.
CreationClassName
The class name used to create an instance of the logical device. CreationClassName is combined with other key properties of this class to uniquely identify instances of this class and its subclasses.
This property is inherited from CIM_LogicalDevice.
DefaultBlockSize
-
Data type: uint64
-
Access type: Read-only
-
Qualifiers: Units ("Bytes"), PUnit ("byte")
The default block size, in bytes, for the device.
This property is inherited from CIM_MediaAccessDevice.
Description
-
Data type: string
-
Access type: Read-only
A textual description of the object.
This property is inherited from CIM_ManagedElement.
DetailedStatus
-
Data type: uint16
-
Access type: Read-only
-
Qualifiers: ModelCorrespondence ("CIM_EnabledLogicalElement.PrimaryStatus", "CIM_ManagedSystemElement.HealthState")
Indicates additional status details that complement the PrimaryStatus property. A NULL value indicates that the instrumentation does not support this property.
This property is inherited from CIM_ManagedSystemElement.
Not Available (0)
Indicates that the instrumentation is capable of reporting this property, but intentionally does not report it for this element.
No Additional Information (1)
Indicates that no details have to be added to the PrimaryStatus property, for example when the PrimaryStatus is set to OK.
Stressed (2)
Indicates that the element functions, but requires attention. Overload and overheated are examples of Stressed states.
Predictive Failure (3)
Indicates that an element functions nominally, but predicts a failure in the near future.
Non-Recoverable Error (4)
Indicates that this element is in an error condition that requires human intervention.
Supporting Entity in Error (5)
Indicates that an element on which this element depends is in error. This element might be OK but cannot function because of the state of a dependent element. An example is a network service or endpoint that cannot function due to lower-layer networking problems.
DMTF Reserved
Reserved.
Vendor Reserved
Reserved.
DeviceID
A unique identifier of the logical device, such as the address.
This property is inherited from CIM_LogicalDevice.
ElementName
-
Data type: string
-
Access type: Read-only
A user-friendly name for the object. This property allows each instance to define a user-friendly name in addition to its key properties, identity data, and description information.
This property is inherited from CIM_ManagedElement.
EnabledDefault
-
Data type: uint16
-
Access type: Read/write
Indicates an administrator's default or startup configuration for the enabled state of an element. The default value Enabled (2).
This property is inherited from CIM_EnabledLogicalElement.
The possible values are.
Enabled (2)
Disabled (3)
Not Applicable (5)
Enabled but Offline (6)
No Default (7)
Quiesce (9)
DMTF Reserved
Vendor Reserved
EnabledState
-
Data type: uint16
-
Access type: Read-only
-
Qualifiers: ModelCorrespondence ("CIM_EnabledLogicalElement.OtherEnabledState")
Indicates the enabled state of an element. Possible values include the transitions between states. For example, Shutting Down (4) and Starting (10) are transient states between Enabled and Disabled.
This property is inherited from CIM_EnabledLogicalElement.
Unknown (0)
Indicates that the state of the element is unknown.
Other (1)
Indicates that the state of the element is described in the OtherEnabledState property.
Enabled (2)
Indicates that the element executes or could execute commands, processes any queued commands, and queues new requests.
Disabled (3)
Indicates that the element does not execute commands and that it drops any new requests.
Shutting Down (4)
Indicates that the element is in the process of changing to a Disabled state.
Not Applicable (5)
Indicates the element does not support to be enabled or disabled.
Enabled but Offline (6)
Indicates that the element might be completing commands and that it drops any new requests.
In Test (7)
Indicates that the element is in a test state.
Deferred (8)
Indicates that the element might be completing commands, but that it queues any new requests.
Quiesce (9)
Indicates that the element is enabled but is in a restricted mode.
Starting (10)
Indicates that the element is in the process of changing to an Enabled state. New requests are queued.
DMTF Reserved
Reserved.
Vendor Reserved
Reserved.
EOTWarningZoneSize
-
Data type: uint32
-
Access type: Read-only
-
Qualifiers: Units ("Bytes"), PUnit ("byte")
The size, in bytes, of the area designated as "end of tape". Access in this area generates an "end of tape" warning.
ErrorCleared
-
Data type: boolean
-
Access type: Read-only
-
Qualifiers: Deprecated ("CIM_ManagedSystemElement.OperationalStatus")
Deprecated description: Indicates whether an error reported by the LastErrorCode property is cleared.
This property is deprecated. Instead we recommend that you use the OperationalStatus property from the CIM_ManagedSystemElement class.
This property is inherited from CIM_LogicalDevice.
ErrorDescription
-
Data type: string
-
Access type: Read-only
-
Qualifiers: Deprecated ("CIM_DeviceErrorData.ErrorDescription")
Deprecated description: Additional information about the error reported by the LastErrorCode property.
This property is deprecated. Instead we recommend that you use the ErrorDescription property from the CIM_DeviceErrorData class.
This property is inherited from CIM_LogicalDevice.
ErrorMethodology
-
Data type: string
-
Access type: Read-only
The type of error detection and correction supported by the device.
This property is inherited from CIM_MediaAccessDevice.
HealthState
-
Data type: uint16
-
Access type: Read-only
Indicates the current health of the element. This attribute expresses the health of this element, but not necessarily the health of its subcomponents.
This property is inherited from CIM_ManagedSystemElement.
Unknown (0)
The implementation cannot report on HealthState at this time.
OK (5)
The element is fully functional and operates within normal operational parameters and without error.
Degraded/Warning (10)
The element is in working order, and all functionality is provided. However, the element does not function to the best of its abilities. For example, the element might not operate at optimal performance, or it might report recoverable errors.
Minor failure (15)
All functionality is available, but some functionality might be degraded.
Major failure (20)
The element is failing. It is possible that some or all of the functionality of this component is degraded or does not work.
Critical failure (25)
The element is nonfunctional, and recovery might not be possible.
Non-recoverable error (30)
The element has completely failed, and recovery is not possible. All functionality that this element provides has been lost.
DMTF Reserved
Reserved.
IdentifyingDescriptions
-
Data type: string array
-
Access type: Read-only
-
Qualifiers: ArrayType ("Indexed"), ModelCorrespondence ("CIM_LogicalDevice.OtherIdentifyingInfo")
An array of strings that describe the OtherIdentifyingInfo array items of the same index.
This property is inherited from CIM_LogicalDevice.
InstallDate
-
Data type: datetime
-
Access type: Read-only
-
Qualifiers: MappingStrings ("MIF.DMTF|ComponentID|001.5")
Indicates when the object was installed. The lack of a value does not indicate that the object is not installed.
This property is inherited from CIM_ManagedSystemElement.
InstanceID
-
Data type: string
-
Access type: Read-only
Uniquely and opaquely identifies an instance of this class within the scope of the containing namespace.
[!Important]
In order to ensure uniqueness within the namespace, the value of the InstanceID property should be constructed in the following pattern: OrgID:LocalID
OrgID must include a copyrighted, trademarked or otherwise unique name that is owned by the business entity that defines the InstanceID, or be a registered ID that is assigned by a recognized global authority. This pattern is similar to the structure of schema class names. In addition, to ensure uniqueness, the first colon in InstanceID must be between the OrgID andLocalID. Therefore the OrgID must not contain a colon (':').
LocalID is chosen by the business entity and should not be re-used to identify different underlying real-world elements.
If the above pattern is not used, the defining entity must assure that the resultant InstanceID value is not re-used across any InstanceID properties that are produced by this provider or other providers for this namespace.
For Distributed Management Task Force (DMTF) defined instances, the pattern must be used with the OrgID set to CIM.
This property is inherited from CIM_ManagedElement.
LastCleaned
-
Data type: datetime
-
Access type: Read-only
The date and time when the device was last cleaned.
This property is inherited from CIM_MediaAccessDevice.
LastErrorCode
-
Data type: uint32
-
Access type: Read-only
-
Qualifiers: Deprecated ("CIM_DeviceErrorData.LastErrorCode")
Deprecated description: The last error code reported by the logical device.
This property is deprecated. Instead we recommend that you use the LastErrorCode property from theCIM_DeviceErrorData class.
This property is inherited from CIM_LogicalDevice.
LoadTime
-
Data type: uint64
-
Access type: Read-only
-
Qualifiers: Units ("MilliSeconds"), PUnit ("second * 10^-3")
The time it takes, in milliseconds, for the device to be able to read or write a media after the device starts loading. For example, for disk drives, this is the interval between a disk not spinning to the disk reporting that it is ready for read/write operations. For tape drives, this starts when media is inserted and ends when the drive reports that it is ready for an application. This is usually at the tape's beginning-of-tape (BOT) area.
This property is inherited from CIM_MediaAccessDevice.
MaxAccessTime
-
Data type: uint64
-
Access type: Read-only
-
Qualifiers: Units ("MilliSeconds"), PUnit ("second * 10^-3")
The maximum access time of the media, in milliseconds. For a disk drive, this represents full seek and full rotational delay. For tape drives, this represents a search from the beginning of the tape to the most physically distant point.
This property is inherited from CIM_MediaAccessDevice.
MaxBlockSize
-
Data type: uint64
-
Access type: Read-only
-
Qualifiers: Units ("Bytes"), PUnit ("byte")
The maximum block size, in bytes, for media accessed by the device.
This property is inherited from CIM_MediaAccessDevice.
MaxMediaSize
-
Data type: uint64
-
Access type: Read-only
-
Qualifiers: MappingStrings ("MIF.DMTF|Sequential Access Devices|001.2", "MIF.DMTF|Host Disk|001.5")
The maximum size, in kilobytes, of media supported by this device.
This property is inherited from CIM_MediaAccessDevice.
MaxPartitionCount
-
Data type: uint32
-
Access type: Read-only
The maximum partition count for the tape drive.
MaxQuiesceTime
-
Data type: uint64
-
Access type: Read-only
-
Qualifiers: Deprecated ("No value"), Units ("MilliSeconds")
Deprecated description: The maximum time in milliseconds, that a device can remain in a temporarily disabled state (Availability and AdditionalAvailability properties set to "21" quiescent ). A value of "0" indicates that the logical device can remain in a temporarily disabled state indefinitely.
This property is deprecated and should not be used.
This property is inherited from CIM_LogicalDevice.
MaxRewindTime
-
Data type: uint64
-
Access type: Read-only
-
Qualifiers: Units ("MilliSeconds"), PUnit ("second * 10^-3")
The time, in milliseconds, to move from the most physically distant point on the tape to the beginning.
MaxUnitsBeforeCleaning
-
Data type: uint64
-
Access type: Read-only
-
Qualifiers: ModelCorrespondence ("CIM_MediaAccessDevice.UnitsDescription")
The maximum number of units that can be used before the device should be cleaned. UnitsDescription defines how the unit type.
This property is inherited from CIM_MediaAccessDevice.
MediaIsLocked
-
Data type: boolean
-
Access type: Read-only
true if the media is locked in the device and can not be ejected; otherwise, false. For non-removable devices, this value should be true.
This property is inherited from CIM_MediaAccessDevice.
MinBlockSize
-
Data type: uint64
-
Access type: Read-only
-
Qualifiers: Units ("Bytes"), PUnit ("byte")
The minimum block size, in bytes, for media accessed by the device.
This property is inherited from CIM_MediaAccessDevice.
MountCount
-
Data type: uint64
-
Access type: Read-only
-
Qualifiers: Counter
The number of times that media has been mounted for data transfer or to clean the device. If the device does not support removable media, this property should be set to zero.
This property is inherited from CIM_MediaAccessDevice.
Name
-
Data type: string
-
Access type: Read-only
-
Qualifiers: MaxLen (1024)
The label by which the object is known. When subclassed, the Name property can be overridden to be a key property.
This property is inherited from CIM_ManagedSystemElement.
NeedsCleaning
-
Data type: boolean
-
Access type: Read-only
true if the device needs cleaning; otherwise, false.
Note
The Capabilities property indicates whether manual or automatic cleaning is possible.
This property is inherited from CIM_MediaAccessDevice.
NumberOfMediaSupported
-
Data type: uint32
-
Access type: Read-only
If the device supports multiple individual media, this property defines the maximum number which can be supported or inserted.
This property is inherited from CIM_MediaAccessDevice.
OperatingStatus
-
Data type: uint16
-
Access type: Read-only
-
Qualifiers: ModelCorrespondence ("CIM_EnabledLogicalElement.EnabledState")
Indicates the current operational condition of the element. This property can be used to provide more detail about the value of the EnabledState property. A NULL value indicates that the instrumentation does not support this property.
This property is inherited from CIM_ManagedSystemElement.
Unknown (0)
Indicates that the instrumentation cannot report on the OperatingStatus property at this time.
Not Available (1)
Indicates that the instrumentation is capable of reporting this property, but intentionally does not report it for this element.
Servicing (2)
Indicates that the element is in process to be configured, maintained, cleaned, or otherwise administered.
Starting (3)
Indicates that the element is being initialized.
Stopping (4)
Indicates that the element is being brought to an orderly stop.
Stopped (5)
Indicates that the element is intentionally stopped.
Aborted (6)
Indicates that the element stopped in an unexpected way.
Dormant (7)
Indicates that the element is inactive.
Completed (8)
Indicates that the element completed its operation. We recommend using a PrimaryStatus property value of OK, Error, or Degraded to indicate success or failure of the operation.
Migrating (9)
Indicates that the element is being moved between host elements.
Emigrating (10)
Indicates that the element is being moved away from the host element.
Immigrating (11)
Indicates that the element is being moved to a new host element.
Snapshotting (12)
Indicates that a snapshot copy of the element is being created.
Shutting Down (13)
Indicates that the element is being brought to an abrupt stop.
In Test (14)
Indicates that the element is performing test functions.
Transitioning (15)
Indicates that the element is between states and is not fully available in either state. Use another value that indicates a more specific transition if one is available.
In Service (16)
Indicates that the element is in service and operational.
DMTF Reserved
Reserved.
Vendor Reserved
Reserved.
OperationalStatus
-
Data type: uint16 array
-
Access type: Read-only
-
Qualifiers: ArrayType ("Indexed"), ModelCorrespondence ("CIM_ManagedSystemElement.StatusDescriptions")
Contains indicators of the current status of the element. The first value of the OperationalStatus property should contain the primary status for the element.
Note
The OperationalStatus property replaces the deprecated Status property. Due to the widespread use of the existing Status property in management applications, we strongly recommend that providers or instrumentation provide both the Status and OperationalStatus properties. When instrumented, Status, because it is a single-valued property, should also provide the primary status of the element.
This property is inherited from CIM_ManagedSystemElement.
Unknown (0)
Indicates that the implementation cannot report on the OperationalStatus property at this time.
Other (1)
Indicates an undefined state.
OK (2)
Indicates full functionality without errors.
Degraded (3)
Indicates that the element is in working order and that all functionality is provided. However, the element does not function to the best of its abilities. For example, the element might not operate at optimal performance, or it might report recoverable errors.
Stressed (4)
Indicates that the element functions, but requires attention. Overload and overheated are examples of Stressed states.
Predictive Failure (5)
Indicates that an element functions nominally, but predicts a failure in the near future.
Error (6)
Indicates that an error has occurred.
Non-Recoverable Error (7)
Indicates that a nonrecoverable error has occurred.
Starting (8)
Indicates that the job is starting.
Stopping (9)
Indicates that the job is stopping.
Stopped (10)
Indicates that the element has been intentionally stopped.
In Service (11)
Indicates that the element is in process to be configured, maintained, cleaned, or otherwise administered.
No Contact (12)
Indicates that the monitoring system has information about this element, but has never been able to establish communications with it.
Lost Communication (13)
Indicates that the monitoring system has successfully contacted this element in the past, but it is currently unavailable.
Aborted (14)
Indicates that the job stopped in an unexpected way. The state and configuration of the job might require an update.
Dormant (15)
Indicates that the job is inactive.
Supporting Entity in Error (16)
Indicates that an element on which this job depends is in error. This element might be OK but cannot function because of the state of a dependent element. An example is a network service or endpoint that cannot function due to lower-layer networking problems.
Completed (17)
Indicates that the job has completed its operation. This value should be combined with either OK, Error, or Degraded to indicate to a client whether the complete operation Completed with OK and passed, or completed with Error and failed, or completed with Degraded and finished the operation, but did not complete OK or did not report an error.
Power Mode (18)
Indicates that the element has additional power model information that is contained in the associated power management service.
DMTF Reserved
Reserved.
Vendor Reserved
Reserved.
OtherEnabledState
-
Data type: string
-
Access type: Read-only
-
Qualifiers: ModelCorrespondence ("CIM_EnabledLogicalElement.EnabledState")
Describes the state of the element when the value of the EnabledState property is Other. This property must be set to NULL when EnabledState is not Other.
This property is inherited from CIM_EnabledLogicalElement.
OtherIdentifyingInfo
-
Data type: string array
-
Access type: Read-only
-
Qualifiers: ArrayType ("Indexed"), MaxLen (256), ModelCorrespondence ("CIM_LogicalDevice.IdentifyingDescriptions")
Information that identifies the logical device, other than DeviceID.
This property is inherited from CIM_LogicalDevice.
Padding
-
Data type: uint32
-
Access type: Read-only
-
Qualifiers: Units ("Bytes"), PUnit ("byte")
The number of bytes inserted between blocks on tape media.
PowerManagementCapabilities
-
Data type: uint16 array
-
Access type: Read-only
-
Qualifiers: Deprecated ("CIM_PowerManagementCapabilities.PowerCapabilities")
Deprecated description: An array that contains the power management capabilities of the device.
This property is deprecated. Instead we recommend that you use the CIM_PowerManagementCapabilities class.
This property is inherited from CIM_LogicalDevice.
This array contains the following values:
Unknown (0)
Not Supported (1)
Disabled (2)
Enabled (3)
Power Saving Modes Entered Automatically (4)
Power State Settable (5)
Configurable Power State
Power Cycling Supported (6)
Timed Power On Supported (7)
PowerManagementSupported
-
Data type: boolean
-
Access type: Read-only
-
Qualifiers: Deprecated ("CIM_PowerManagementCapabilities")
Deprecated description: true if the logical device can be power managed; otherwise, false.
This property is deprecated. Instead, you should use the PowerManagementCapabilities class.
This property is inherited from CIM_LogicalDevice.
PowerOnHours
-
Data type: uint64
-
Access type: Read-only
-
Qualifiers: Units ("Hours"), Counter
The number of consecutive hours the logical device has been powered, since its last power cycle.
This property is inherited from CIM_LogicalDevice.
PrimaryStatus
-
Data type: uint16
-
Access type: Read-only
-
Qualifiers: ModelCorrespondence ("CIM_ManagedSystemElement.DetailedStatus", "CIM_ManagedSystemElement.HealthState")
Indicates a high-level status value.
This property is inherited from CIM_ManagedSystemElement.
The possible values are.
Unknown (0)
OK (1)
Degraded (2)
Error (3)
DMTF Reserved
Vendor Reserved
RequestedState
-
Data type: uint16
-
Access type: Read-only
-
Qualifiers: ModelCorrespondence ("CIM_EnabledLogicalElement.EnabledState")
Indicates the last requested state for the element. The current state is indicated by the EnabledState property. This property enables you to compare the last requested and current states.
Note
When the value of the EnabledState property is Not Applicable, this property has no meaning.
This property is inherited from CIM_EnabledLogicalElement.
Unknown (0)
Indicates the last requested state for the element is unknown.
Enabled (2)
Indicates that the element executes or could execute commands, processes any queued commands, and queues new requests.
Disabled (3)
Indicates a request to immediately disable the element, such that it does not execute or accept any commands or processing requests.
Shut Down (4)
Indicates a request for an orderly transition to the Disabled state, and might require you to shut off the power to completely erase any existing state.
No Change (5)
No state change has been requested.
Offline (6)
Indicates a request to change to the Enabled but Offline state.
Test (7)
Indicates that the element is in a test state.
Deferred (8)
Indicates that the element might be completing commands, but that it queues any new requests.
Quiesce (9)
Indicates that the element is enabled but is in a restricted mode.
Reboot (10)
Indicates a request to shut down and then change to an Enabled state.
Reset (11)
Indicates a request to change to a Disabled state and then change to an Enabled state.
Not Applicable (12)
Indicates that this instance does not support the RequestedState property.
DMTF Reserved
Reserved.
Vendor Reserved
Reserved.
Security
-
Data type: uint16
-
Access type: Read-only
-
Qualifiers: MappingStrings ("MIF.DMTF|Disks|003.22")
The operational security for the device.
This property is inherited from CIM_MediaAccessDevice.
The possible values are:
Other (1)
Unknown (2)
None (3)
Read Only (4)
Locked Out (5)
Boot Bypass (6)
Boot Bypass and Read Only (7)
Status
-
Data type: string
-
Access type: Read-only
-
Qualifiers: Deprecated ("CIM_ManagedSystemElement.OperationalStatus"), MaxLen (10)
Indicates the primary status of the object.
Note
This property is deprecated. It is replaced by the OperationalStatus property. If you choose to use the Status property for backward compatibility, it should be secondary to the OperationalStatus property.
This property is inherited from CIM_ManagedSystemElement.
The possible values are.
("OK")
("Error")
("Degraded")
("Unknown")
("Pred Fail")
("Starting")
("Stopping")
("Service")
("Stressed")
("NonRecover")
("No Contact")
("Lost Comm")
("Stopped")
StatusDescriptions
-
Data type: string array
-
Access type: Read-only
-
Qualifiers: ArrayType ("Indexed"), ModelCorrespondence ("CIM_ManagedSystemElement.OperationalStatus")
Indicates descriptions of the corresponding values in the OperationalStatus array. For example, if an element in the OperationalStatus property contains the value Stopping, then the element at the same array index in this property might contain an explanation as to why an object is being stopped.
This property is inherited from CIM_ManagedSystemElement.
StatusInfo
-
Data type: uint16
-
Access type: Read-only
-
Qualifiers: Deprecated ("CIM_EnabledLogicalElement.EnabledState"), MappingStrings ("MIF.DMTF|Operational State|006.4")
Deprecated description: Indicates whether the logical device is enabled or in a related state.
This property is deprecated. Instead we recommend that you use the CIM_PowerManagementCapabilities class.
This property is inherited from CIM_LogicalDevice.
The possible values are:
Other (1)
Unknown (2)
Enabled (3)
Disabled (4)
Not Applicable (5)
SystemCreationClassName
-
Data type: string
-
Access type: Read-only
-
Qualifiers: Key, MaxLen (256), Propagated ("CIM_System.CreationClassName")
The class name used to create an instance of the system that contains the logical device. SystemCreationClassName is combined with other key properties of this class to uniquely identify instances of this class and its subclasses.
This property is inherited from CIM_LogicalDevice.
SystemName
-
Data type: string
-
Access type: Read-only
-
Qualifiers: Key, MaxLen (256), Propagated ("CIM_System.Name")
The name of the system that contains the logical device.
This property is inherited from CIM_LogicalDevice.
TimeOfLastMount
-
Data type: datetime
-
Access type: Read-only
The most recent date and time when media was mounted on the device. This property is only used by devices that support removable media.
This property is inherited from CIM_MediaAccessDevice.
TimeOfLastStateChange
-
Data type: datetime
-
Access type: Read-only
Indicates when the element last changed state. If the state of the element has not changed and this property is populated, then it must be set to a zero interval value. If a state change was requested, but was rejected or is not yet processed, the property must not be updated.
This property is inherited from CIM_EnabledLogicalElement.
TotalMountTime
-
Data type: uint64
-
Access type: Read-only
The time, in seconds, that media has been mounted for data transfer or to clean the device. If the device does not support removable media, this property should be set to zero.
This property is inherited from CIM_MediaAccessDevice.
TotalPowerOnHours
-
Data type: uint64
-
Access type: Read-only
-
Qualifiers: Units ("Hours"), Counter
The total number of hours the logical device has been powered.
This property is inherited from CIM_LogicalDevice.
TransitioningToState
-
Data type: uint16
-
Access type: Read-only
-
Qualifiers: ModelCorrespondence ("CIM_EnabledLogicalElement.RequestStateChange", "CIM_EnabledLogicalElement.RequestedState", "CIM_EnabledLogicalElement.EnabledState")
Indicates the target state to which the instance is changing.
A value of No Change indicates that no transition is in progress. A value of Not Applicable indicates that the implementation does not report ongoing transitions.
This property is inherited from CIM_EnabledLogicalElement.
The possible values are.
Unknown (0)
Enabled (2)
Disabled (3)
Shut Down (4)
No Change (5)
Offline (6)
Test (7)
Defer (8)
Quiesce (9)
Reboot (10)
Reset (11)
Not Applicable (12)
DMTF Reserved
UncompressedDataRate
-
Data type: uint32
-
Access type: Read-only
-
Qualifiers: Units ("KiloBytes per Second"), PUnit ("byte / second * 10^3")
The sustained data transfer rate in kilobytes at which the device can read and write to a media. This is a sustained, raw data rate. Maximum rates or rates with compression should not be reported in this property.
This property is inherited from CIM_MediaAccessDevice.
UnitsDescription
-
Data type: string
-
Access type: Read-only
-
Qualifiers: ModelCorrespondence ("CIM_MediaAccessDevice.MaxUnitsBeforeCleaning", "CIM_MediaAccessDevice.UnitsUsed")
Describes the unit type of the MaxUnitsBeforeCleaning and UnitsUsed properties.
This property is inherited from CIM_MediaAccessDevice.
UnitsUsed
-
Data type: uint64
-
Access type: Read-only
-
Qualifiers: Gauge, ModelCorrespondence ("CIM_MediaAccessDevice.UnitsDescription", "CIM_MediaAccessDevice.MaxUnitsBeforeCleaning")
The number of units used by the device. This property is used to determine when the device should be cleaned. UnitsDescription defines how the unit type.
This property is inherited from CIM_MediaAccessDevice.
UnloadTime
-
Data type: uint64
-
Access type: Read-only
-
Qualifiers: Units ("MilliSeconds"), PUnit ("second * 10^-3")
The time it takes, in milliseconds, for the device to transition from reading or writing media to unloading. For example, for disk drives, this is the interval between a disk spinning at nominal speeds and a disk not spinning. For tape drives, this is the time for a media to go from its BOT to being fully ejected and accessible to a picker element or human operator.
This property is inherited from CIM_MediaAccessDevice.
Requirements
| Minimum supported client |
None supported |
| Minimum supported server |
Windows Server 2016 |
| Namespace |
Root\HyperVCluster\v2 |
| MOF |
|
| DLL |
|