Поделиться через


NDIS_SET_PACKET_TIME_SENT (Compact 2013)

3/26/2014

This macro sets the TimeSent value in the out-of-band data block associated with a specified packet descriptor.

Syntax

ULONGLONG NDIS_SET_PACKET_TIME_SENT(
  PNDIS_PACKET _Packet,
  ULONGLONG _TimeSent
);

Parameters

  • _Packet
    Pointer to a packet descriptor allocated by the caller for receive indications
  • _TimeSent
    Specifies the system time at which the packet was transmitted over the network from a remote node

Return Value

The return value is the _TimeSent value.

Remarks

Miniports can use this macro to set this time stamp in the out-of-band data block associated with a packet descriptor that they are about to indicate with the NdisMIndicateReceivePacket function.

All time stamps set in the NDIS_PACKET_OOB_DATA structures associated with packets are expressed in system time units as the number of 100-nanosecond intervals since January 1, 1601.

When a protocol driver's ProtocolReceivePacket function is called with such an indication, it can use the NDIS_GET_PACKET_TIME_SENT macro to retrieve the TimeSent time stamp, using the _Packet pointer that it is given on entry.

The NDIS_SET_PACKET_TIME_SENT macro is defined as follows.

#define NDIS_SET_PACKET_TIME_SENT(_Packet, _TimeSent)       \
    ((PNDIS_PACKET_OOB_DATA)((PUCHAR)(_Packet) +            \
    (_Packet)->Private.NdisPacketOobOffset))->TimeSent = (_TimeSent)

Requirements

Header

ndis.h

See Also

Reference

NDIS 5.x Legacy Network Driver Macros
NdisGetCurrentSystemTime
NDIS_GET_PACKET_TIME_SENT
NdisMIndicateReceivePacket
NdisMSendComplete
NDIS_PACKET_OOB_DATA
NdisSend
ProtocolReceive
ProtocolReceivePacket
NDIS 5.x Legacy Reference