Поделиться через

NdisRequest (Compact 2013)

  • Статья

3/26/2014

This function forwards a request to the underlying driver that it query the capabilities or status of its NIC or that it set the state of its NIC.

Syntax

VOID NdisRequest(
  PNDIS_STATUS Status,
  NDIS_HANDLE NdisBindingHandle,
  PNDIS_REQUEST NdisRequest
);

Parameters

  • Status
    [in] Pointer to a caller-supplied variable that is set on return from this function. The underlying driver determines which NDIS_STATUS_XXX is returned.
  • NdisBindingHandle
    [in] Handle returned by the NdisOpenAdapter function that identifies the target NIC or the virtual adapter of the next-lower driver to which the caller is bound.
  • NdisRequest
    [in] Pointer to a buffered structure specifying the operation requested with a specified OID_XXX code for either a query or a set.

Return Value

The following table shows typical return values for this function.

Value

Description

NDIS_STATUS_SUCCESS

The requested operation completed successfully.

NDIS_STATUS_PENDING

The request is being handled asynchronously, and the caller's ProtocolRequestComplete function will be called when it is completed.

NDIS_STATUS_INVALID_OID

The OID_XXX code specified in the Oid member of the NDIS_REQUEST structured buffer at NdisRequest is invalid or unsupported by the underlying driver.

NDIS_STATUS_INVALID_LENGTH or NDIS_STATUS_BUFFER_TOO_SHORT

The value specified in the InformationBufferLength member of the NDIS_REQUEST-structured buffer at NdisRequest does not match the requirements for the given OID_XXX code. If the information buffer is too small, the BytesNeeded member contains the correct value for InformationBufferLength on return from this function.

NDIS_STATUS_INVALID_DATA

The data supplied at InformationBuffer in the specified NDIS_REQUEST structure is invalid for the given OID_XXX code.

NDIS_STATUS_NOT_SUPPORTED or NDIS_STATUS_NOT_RECOGNIZED

The underlying driver does not support the requested operation.

NDIS_STATUS_RESOURCES

The request could not be satisfied due to a resource shortage. Usually, this return indicates that an attempt to allocate memory was unsuccessful, but it does not necessarily indicate that the same request, submitted later, will fail for the same reason.

NDIS_STATUS_NOT_ACCEPTED

The underlying driver attempted the requested operation, usually a set, on its NIC but it was failed by the netcard. For example, an attempt to set too many multicast addresses might cause the return of this value.

NDIS_STATUS_CLOSING or NDIS_STATUS_CLOSING_INDICATING

The underlying driver failed the requested operation because a close is in progress.

NDIS_STATUS_RESET_IN_PROGRESS

The underlying NIC driver cannot satisfy the request at this time because it is currently resetting the netcard. The caller's ProtocolStatus function was or will be called with NDIS_STATUS_RESET_START to indicate that a reset is in progress. This return value does not necessarily indicate that the same request, submitted later, will fail for the same reason.

NDIS_STATUS_FAILURE

This value is usually a nonspecific default, returned when none of the more specific NDIS_STATUS_XXX caused the underlying driver to fail the request.

Remarks

A protocol driver must allocate sufficient memory for the information buffer associated with the OID_XXX of the operation it requests. The driver also must allocate and set up the buffer at NdisRequest before it calls this function.

For callers layered above an intermediate NDIS driver, this function requests that the next-lower driver return information about its own capabilities, or directs that driver to handle specific functionality in a caller-determined manner. If the next-lower driver is an NDIS intermediate driver, it can call this function with an OID-specific request of its own before completing the request originally submitted by the higher-level protocol.

Some errors returned at Status are recoverable, including the following:

  • NDIS_STATUS_INVALID_OID
  • NDIS_STATUS_INVALID_LENGTH
  • NDIS_STATUS_BUFFER_TOO_SHORT
  • NDIS_STATUS_INVALID_DATA
  • NDIS_STATUS_RESOURCES
  • NDIS_STATUS_RESET_IN_PROGRESS

This means that a driver can modify the packet at NdisRequest appropriately to correct the OID_XXX code and/or the size or contents of the buffer at InformationBuffer and resubmit the request packet to this function. The same packet might be satisfied on resubmission to this function if the original call indicated a reset in progress or that a resource shortage, which might be temporary, prevented that request from being carried out.

The NDIS library maintains bindings for underlying miniport drivers. NDIS can return information for binding-specific queries if a specified object identifier is associated with a system-defined medium type for which the system provides a filter library.

Requirements

Header

ndis.h

See Also

Reference

NDIS 5.x Legacy Functions
NdisOpenAdapter
ProtocolStatus
NDIS_REQUEST
ProtocolRequestComplete