Düzenle

Aracılığıyla paylaş

Lesson 2: Adding a Flat File Send Port

  • Makale

In this lesson, you configure the send port and the send location. You use the send port to define how you want messages sent. You also create a file folder location for sent messages.

To add a flat file send port

  1. In the BizTalk Server Administration Console, right-click Send Ports, point to New, and then click Static One-way Send Port.

  2. In the Send Port Properties dialog box, in the Name box, type MT103_FlatFile_SendPort.

  3. In the Transport section, for the Type box, click the drop-down list, and then select FILE.

  4. Click the Configure button to the right of the Type drop-down list.

  5. In the FILE Transport Properties dialog box, click Browse.

  6. In the Browse For Folder dialog box, move to the <drive>:\Labs folder, and then click Make New Folder.

  7. Create an Outbound folder in <drive>:\Labs, and then click OK.

  8. In the File name box, type %MessageID%.txt, and then click OK.

  9. In the Send Port Properties dialog box, click the drop-down list for the Send pipeline box, and then select MT103SendPipeline.

  10. In the left pane, click Filters, and then do the following:

    Use this To do this
    Property Select BTS.ReceivePortName.
    Operator Select ==.
    Value Type MT103_XML_ReceivePort.

  11. Click Apply, and then click OK.

  12. In the Send Ports pane, right-click MT103_FlatFile_SendPort, and then click Start.

    Proceed to Module 5: Adding a Flat File Receive Location and XML Send Port.