Uygulamalara verilen iptal edilmiş izinleri geri yükleme

Makale
05/18/2024

Bu makalede, bir uygulamaya daha önce iptal edilmiş izinleri geri yüklemeyi öğreneceksiniz. Kuruluşunuzun verilerine erişim izinleri verilmiş bir uygulamanın izinlerini geri yükleyebilirsiniz. Ayrıca, kullanıcı olarak davranma izni verilen bir uygulamanın izinlerini de geri yükleyebilirsiniz.

Şu anda izinleri geri yüklemek yalnızca Microsoft Graph PowerShell ve Microsoft Graph API çağrıları aracılığıyla mümkündür. Microsoft Entra yönetim merkezi aracılığıyla izinleri geri yükleyemezsiniz. Bu makalede, Microsoft Graph PowerShell kullanarak izinleri geri yüklemeyi öğreneceksiniz.

Önkoşullar

Bir uygulamanın önceden iptal edilmiş izinlerini geri yüklemek için şunları yapmanız gerekir:

Etkin aboneliği olan bir Azure hesabı. Ücretsiz hesap oluşturun.
Aşağıdaki rollerden biri: Cloud Application Yönetici istrator, Application Yönetici istrator.
Yönetici olmayan bir Hizmet sorumlusu sahibi yenileme belirteçlerini geçersiz kılamaz.

Bir uygulama için iptal edilen izinleri geri yükleme

İzinleri geri yüklemek için farklı yöntemler deneyebilirsiniz:

Uygulamanın yeniden onay uygulaması için İzinler sayfasındaki Yönetici onayı ver düğmesini kullanın. Bu onay, uygulamanın geliştiricisinin başlangıçta uygulama bildiriminde istediği izin kümesini uygular.

Not

Yönetici onayının kayıttan kaldırılması, geliştirici tarafından yapılandırılan varsayılan kümenin parçası olmayan tüm verilen izinleri kaldırır.

İptal edilen belirli izni biliyorsanız, PowerShell veya Microsoft Graph API'sini kullanarak yeniden el ile vekleyebilirsiniz.
İptal edilen izinleri bilmiyorsanız, iptal edilen izinleri algılamak ve geri yüklemek için bu makalede sağlanan betikleri kullanabilirsiniz.

İlk olarak, betikteki servicePrincipalId değerini, izinlerini geri yüklemek istediğiniz kurumsal uygulamanın kimlik değeri olarak ayarlayın. Bu kimlik, Microsoft Entra yönetim merkezi Kurumsal uygulamalar sayfasında da olarak adlandırılırobject ID.

Ardından, kaldırılmış olabilecek temsilci veya yalnızca uygulama izinlerinin listesini görmek için her betiği ile $ForceGrantUpdate = $false çalıştırın. İzinler zaten geri yüklenmiş olsa bile, denetim günlüklerinizdeki olayları iptal etme işlemi betik sonuçlarında görünmeye devam edebilir.

Betiğin algılandığı iptal edilmiş izinleri geri yüklemeyi denemesini istiyorsanız olarak $true bırakın$ForceGrantUpdate. Betikler onay ister, ancak geri yüklemiş olduğu her izin için tek tek onay istemez.

Uygulamalara izinler verilirken dikkatli olun. İzinleri değerlendirme hakkında daha fazla bilgi edinmek için bkz . İzinleri değerlendirme.

Temsilci izinlerini geri yükleme

# WARNING: Setting $ForceGrantUpdate to true will modify permission grants without
# prompting for confirmation. This can result in unintended changes to your
# application's security settings. Use with caution!
$ForceGrantUpdate = $false

# Set the start and end dates for the audit log search
# If setting date use yyyy-MM-dd format
# endDate is set to tomorrow to include today's audit logs
$startDate = (Get-Date).AddDays(-7).ToString('yyyy-MM-dd')
$endDate = (Get-Date).AddDays(1).ToString('yyyy-MM-dd')

# Set the service principal ID
$servicePrincipalId = "aaaaaaaa-bbbb-cccc-1111-222222222222"

Write-Host "Searching for audit logs between $startDate and $endDate" -ForegroundColor Green
Write-Host "Searching for audit logs for service principal $servicePrincipalId" -ForegroundColor Green

if ($ForceGrantUpdate -eq $true) {
    Write-Host "WARNING: ForceGrantUpdate is set to true. This will modify permission grants without prompting for confirmation. This can result in unintended changes to your application's security settings. Use with caution!" -ForegroundColor Red
    $continue = Read-Host "Do you want to continue? (Y/N)"
    if ($continue -eq "Y" -or $continue -eq "y") {
        Write-Host "Continuing..."
    } else {
        Write-Host "Exiting..."
        exit
    }
}

# Connect to MS Graph
Connect-MgGraph -Scopes "AuditLog.Read.All","DelegatedPermissionGrant.ReadWrite.All" -ErrorAction Stop | Out-Null

# Create a hashtable to store the OAuth2PermissionGrants
$oAuth2PermissionGrants = @{}

function Merge-Scopes($oldScopes, $newScopes) {
    $oldScopes = $oldScopes.Trim() -split '\s+'
    $newScopes = $newScopes.Trim() -split '\s+'
    $mergedScopesArray = $oldScopes + $newScopes | Select-Object -Unique
    $mergedScopes = $mergedScopesArray -join ' '
    return $mergedScopes.Trim()
}

# Function to merge scopes if multiple OAuth2PermissionGrants are found in the audit logs
function Add-Scopes($resourceId, $newScopes) {
    if($oAuth2PermissionGrants.ContainsKey($resourceId)) {
        $oldScopes = $oAuth2PermissionGrants[$resourceId]
        $oAuth2PermissionGrants[$resourceId] = Merge-Scopes $oldScopes $newScopes
    }
    else {
        $oAuth2PermissionGrants[$resourceId] = $newScopes
    }
}

function Get-ScopeDifference ($generatedScope, $currentScope) {
    $generatedScopeArray = $generatedScope.Trim() -split '\s+'
    $currentScopeArray = $currentScope.Trim() -split '\s+'
    $difference = $generatedScopeArray | Where-Object { $_ -notin $currentScopeArray }
    $difference = $difference -join ' '
    return $difference.Trim()
}

# Set the filter for the audit log search
$filterOAuth2PermissionGrant = "activityDateTime ge $startDate and activityDateTime le $endDate" +
    " and Result eq 'success'" +
    " and ActivityDisplayName eq 'Remove delegated permission grant'" +
    " and targetResources/any(x: x/id eq '$servicePrincipalId')"
try {
    # Retrieve the audit logs for removed OAuth2PermissionGrants
    $oAuth2PermissionGrantsAuditLogs = Get-MgAuditLogDirectoryAudit -Filter $filterOAuth2PermissionGrant -All -ErrorAction Stop
}
catch {
    Disconnect-MgGraph | Out-Null
    throw $_
}

# Remove User Delegated Permission Grants
$oAuth2PermissionGrantsAuditLogs = $oAuth2PermissionGrantsAuditLogs | Where-Object {
    -not ($_.TargetResources.ModifiedProperties.OldValue -eq '"Principal"')
}

# Merge duplicate OAuth2PermissionGrants from AuditLogs using Add-Scopes
foreach ($auditLog in $oAuth2PermissionGrantsAuditLogs) {
    $resourceId = $auditLog.TargetResources[0].Id
    # We only want to process OAuth2PermissionGrant Audit Logs where $servicePrincipalId is the clientId not the resourceId
    if ($resourceId -eq $servicePrincipalId) {
        continue
    }
    $oldScope = $auditLog.TargetResources[0].ModifiedProperties | Where-Object { $_.DisplayName -eq "DelegatedPermissionGrant.Scope" } | Select-Object -ExpandProperty OldValue
    if ($oldScope -eq $null) {
        $oldScope = ""
    }
    $oldScope = $oldScope.Replace('"', '')
    $newScope = $auditLog.TargetResources[0].ModifiedProperties | Where-Object { $_.DisplayName -eq "DelegatedPermissionGrant.Scope" } | Select-Object -ExpandProperty NewValue
    if ($newScope -eq $null) {
        $newScope = ""
    }
    $newScope = $newScope.Replace('"', '')
    $scope = Merge-Scopes $oldScope $newScope
    Add-Scopes $resourceId $scope
}

$permissionCount = 0
foreach ($resourceId in $oAuth2PermissionGrants.keys) {
    $scope = $oAuth2PermissionGrants[$resourceId]
    $params = @{
        clientId = $servicePrincipalId
        consentType = "AllPrincipals"
        resourceId = $resourceId
        scope = $scope
    }

    try {
        $currentOAuth2PermissionGrant = Get-MgOauth2PermissionGrant -Filter "clientId eq '$servicePrincipalId' and consentType eq 'AllPrincipals' and resourceId eq '$resourceId'" -ErrorAction Stop
        $action = "Creating"
        if ($currentOAuth2PermissionGrant -ne $null) {
            $action = "Updating"
        }
        Write-Host "--------------------------"
        if ($ForceGrantUpdate -eq $true) {
            Write-Host "$action OAuth2PermissionGrant with the following parameters:"
        } else {
            Write-Host "Potentially removed OAuth2PermissionGrant scopes with the following parameters:"
        }
        Write-Host "    clientId: $($params.clientId)"
        Write-Host "    consentType: $($params.consentType)"
        Write-Host "    resourceId: $($params.resourceId)"
        if ($currentOAuth2PermissionGrant -ne $null) {
            $scopeDifference = Get-ScopeDifference $scope $currentOAuth2PermissionGrant.Scope
            if ($scopeDifference -eq "") {
                Write-Host "OAuth2PermissionGrant already exists with the same scope" -ForegroundColor Yellow
                if ($ForceGrantUpdate -eq $true) {
                    Write-Host "Skipping Update" -ForegroundColor Yellow
                }
                continue
            }
            else {
                Write-Host "    scope diff: '$scopeDifference'"
            }
        }
        else {
            Write-Host "    scope: '$($params.scope)'"
        }
        if ($ForceGrantUpdate -eq $true -and $currentOAuth2PermissionGrant -eq $null) {
            New-MgOauth2PermissionGrant -BodyParameter $params -ErrorAction Stop | Out-Null
            Write-Host "OAuth2PermissionGrant was created successfully" -ForegroundColor Green
        }
        if ($ForceGrantUpdate -eq $true -and $currentOAuth2PermissionGrant -ne $null) {
            Write-Host "    Current Scope: '$($currentOAuth2PermissionGrant.scope)'" -ForegroundColor Yellow
            Write-Host "    Merging with scopes from audit logs" -ForegroundColor Yellow
            $params.scope = Merge-Scopes $currentOAuth2PermissionGrant.scope $params.scope
            Write-Host "    New Scope: '$($params.scope)'" -ForegroundColor Yellow
            Update-MgOauth2PermissionGrant -OAuth2PermissionGrantId $currentOAuth2PermissionGrant.id -BodyParameter $params -ErrorAction Stop | Out-Null
            Write-Host "OAuth2PermissionGrant was updated successfully" -ForegroundColor Green
        }
        $permissionCount++
    }
    catch {
        Disconnect-MgGraph | Out-Null
        throw $_
    }
}

Disconnect-MgGraph | Out-Null

if ($ForceGrantUpdate -eq $true) {
    Write-Host "--------------------------"
    Write-Host "$permissionCount OAuth2PermissionGrants were created/updated successfully" -ForegroundColor Green
} else {
    Write-Host "--------------------------"
    Write-Host "$permissionCount OAuth2PermissionGrants were found" -ForegroundColor Green
}

Yalnızca uygulama izinlerini geri yükleme

Not

Yalnızca uygulamaya yönelik Microsoft Graph izinleri vermek için Privileged Role Yönetici istrator rolü gerekir.

# WARNING: Setting $ForceGrantUpdate to true will modify permission grants without
# prompting for confirmation. This can result in unintended changes to your
# application's security settings. Use with caution!
$ForceGrantUpdate = $false

# Set the start and end dates for the audit log search
# If setting date use yyyy-MM-dd format
# endDate is set to tomorrow to include today's audit logs
$startDate = (Get-Date).AddDays(-7).ToString('yyyy-MM-dd')
$endDate = (Get-Date).AddDays(1).ToString('yyyy-MM-dd')

# Set the service principal ID
$servicePrincipalId = "aaaaaaaa-bbbb-cccc-1111-222222222222"

Write-Host "Searching for audit logs between $startDate and $endDate" -ForegroundColor Green
Write-Host "Searching for audit logs for service principal $servicePrincipalId" -ForegroundColor Green

if ($ForceGrantUpdate -eq $true) {
    Write-Host "WARNING: ForceGrantUpdate is set to true. This will modify permission grants without prompting for confirmation. This can result in unintended changes to your application's security settings. Use with caution!" -ForegroundColor Red
    $continue = Read-Host "Do you want to continue? (Y/N)"
    if ($continue -eq "Y" -or $continue -eq "y") {
        Write-Host "Continuing..."
    } else {
        Write-Host "Exiting..."
        exit
    }
}

# Connect to MS Graph
Connect-MgGraph -Scopes "AuditLog.Read.All","Application.Read.All","AppRoleAssignment.ReadWrite.All" -ErrorAction Stop | Out-Null

# Set the filter for the audit log search
$filterAppRoleAssignment = "activityDateTime ge $startDate and activityDateTime le $endDate" + 
    " and Result eq 'success'" +
    " and ActivityDisplayName eq 'Remove app role assignment from service principal'" +
    " and targetResources/any(x: x/id eq '$servicePrincipalId')"

try {
    # Retrieve the audit logs for removed AppRoleAssignments
    $appRoleAssignmentsAuditLogs = Get-MgAuditLogDirectoryAudit -Filter $filterAppRoleAssignment -All -ErrorAction Stop
}
catch {
    Disconnect-MgGraph | Out-Null
    throw $_
}

$permissionCount = 0
foreach ($auditLog in $appRoleAssignmentsAuditLogs) {
    $resourceId = $auditLog.TargetResources[0].Id
    # We only want to process AppRoleAssignments Audit Logs where $servicePrincipalId is the principalId not the resourceId
    if ($resourceId -eq $servicePrincipalId) {
        continue
    }
    $appRoleId = $auditLog.TargetResources[0].ModifiedProperties | Where-Object { $_.DisplayName -eq "AppRole.Id" } | Select-Object -ExpandProperty OldValue
    $appRoleId = $appRoleId.Replace('"', '')
    $params = @{
        principalId = $servicePrincipalId
        resourceId = $resourceId
        appRoleId = $appRoleId
    }

    try {
        $sp = Get-MgServicePrincipal -ServicePrincipalId $resourceId
        $appRole = $sp.AppRoles | Where-Object { $_.Id -eq $appRoleId }

        Write-Host "--------------------------"
        if ($ForceGrantUpdate -eq $true) {
            Write-Host "Creating AppRoleAssignment with the following parameters:"
        } else {
            Write-Host "Potentially removed AppRoleAssignment with the following parameters:"
        }
        Write-Host "    principalId: $($params.principalId)"
        Write-Host "    resourceId: $($params.resourceId)"
        Write-Host "    appRoleId: $($params.appRoleId)"
        Write-Host "    appRoleValue: $($appRole.Value)"
        Write-Host "    appRoleDisplayName: $($appRole.DisplayName)"
        if ($ForceGrantUpdate -eq $true) {
            New-MgServicePrincipalAppRoleAssignment -ServicePrincipalId $servicePrincipalId -BodyParameter $params -ErrorAction Stop | Out-Null
            Write-Host "AppRoleAssignment was created successfully" -ForegroundColor Green
        }
        $permissionCount++
    }
    catch {
        if ($_.Exception.Message -like "*Permission being assigned already exists on the object*") {
            Write-Host "AppRoleAssignment already exists skipping creation" -ForegroundColor Yellow
        }
        else {
            Disconnect-MgGraph | Out-Null
            throw $_
        }
    }
}

Disconnect-MgGraph | Out-Null

if ($ForceGrantUpdate -eq $true) {
    Write-Host "--------------------------"
    Write-Host "$permissionCount AppRoleAssignments were created successfully" -ForegroundColor Green
} else {
    Write-Host "--------------------------"
    Write-Host "$permissionCount AppRoleAssignments were found" -ForegroundColor Green
}

Aracılığıyla paylaş

Uygulamalara verilen iptal edilmiş izinleri geri yükleme

Önkoşullar

Bir uygulama için iptal edilen izinleri geri yükleme

Temsilci izinlerini geri yükleme

Yalnızca uygulama izinlerini geri yükleme

Geri Bildirim

Ek kaynaklar