Master.BoundingBox method (Visio)
Returns a rectangle that tightly encloses the shapes of a master.
Syntax
expression. BoundingBox( _Flags_ , _lpr8Left_ , _lpr8Bottom_ , _lpr8Right_ , _lpr8Top_ )
expression A variable that represents a Master object.
Parameters
| Name | Required/Optional | Data type | Description |
|---|---|---|---|
| Flags | Required | Integer | Flags that influence the bounding box calculated for each shape that contributes to the resulting bounding box. |
| lpr8Left | Required | Double | Returns the x-coordinate of the left edge of the bounding box. |
| lpr8Bottom | Required | Double | Returns the y-coordinate of the bottom edge of the bounding box. |
| lpr8Right | Required | Double | Returns the x-coordinate of the right edge of the bounding box. |
| lpr8Top | Required | Double | Returns the y-coordinate of the top edge of the bounding box. |
Return value
Nothing
Remarks
For a Shape object, the BoundingBox method returns a rectangle that tightly encloses the shape and its subshapes.
For a Page, Master, or Selection object, the BoundingBox method returns a rectangle that tightly encloses the page's, master's, or selection's shapes and their subshapes.
If the BoundingBox method returns an error, or if it is asked to return the rectangle enclosing zero shapes, the rectangle returned is { left: 0, bottom: 0, right: -1, top: -1 }; otherwise, the rectangle returned has left less than or equal to (<=) right, and bottom less than or equal to (<=) top. The numbers returned are in internal units (inches).
The bounding rectangle returned for an individual shape depends on its Type property.
| Constant | Description |
|---|---|
| visTypePage | Equivalent to Page.BoundingBox or Master.BoundingBox. |
| visTypeGroup | Rectangle that tightly encloses the group and its subshapes. |
| visTypeShape | Determined rectangle depends on flags. See the following table. |
| visTypeForeignObject | Determined rectangle depends on flags. See the following table. |
| visTypeGuide | Determined rectangle depends on flags. See the following table. |
The method will raise an exception for object type visTypeDoc.
The Flags argument has several bits that control the bounding box retrieved for each shape. If more than one of the bits described in the following table is set, the rectangle determined for the shape covers all rectangles implied by the bits.
| Flag | Value | Description |
|---|---|---|
| visBBoxUprightWH | &H1 | Returns a rectangle that is the smallest rectangle parallel to the local coordinate system of the shape's parent that encloses the shape's width-height box.If the shape is not rotated, its upright width-height box and its width-height box are the same. Paths in the shape's geometry need not and often don't lie entirely within the shape's width-height box. |
| visBBoxUprightText | &H2 | Returns a rectangle that is the smallest rectangle parallel to the local coordinate system of the shape's parent that encloses the shape's text. |
| visBBoxExtents | &H4 | Returns a rectangle that is the smallest rectangle parallel to the local coordinate system of the shape's parent that encloses the paths stroked by the shape's geometry.This may be larger or smaller than the shape's upright width-height box. The extents box determined for a shape of type visTypeForeignObject equals that shape's upright width-height box. |
| visBBoxIncludeHidden | &H10 | Includes hidden geometry. |
| visBBoxIgnoreVisible | &H20 | Ignores visible geometry. |
| visBBoxIncludeDataGraphics | &H10000 | Includes data-graphic callout shapes (and their sub-shapes) that are applied to the shapes of the master. Off by default. |
| visBBoxIncludeGuides | &H1000 | Includes extents for shapes of type visTypeguide. By default, the extents of shapes of type visTypeGuide are ignored.If you request guide extents, then only the x positions of vertical guides and the y positions of horizontal guides contribute to the rectangle that is returned. If any vertical guides are reported on, an infinite y extent is returned. If any horizontal guides are reported on, an infinite x extent is returned. If any rotated guides are reported on, infinite x and y extents are returned. |
| visBBoxDrawingCoords | &H2000 | Returns numbers in the drawing coordinate system of the page or master whose shapes are being considered. By default, the returned numbers are drawing units in the local coordinate system of the parent of the considered shapes. |
| visBBoxNoNonPrint | &H4000 | Ignores the extents of shapes that are nonprinting. A shape is nonprinting if the value of its NonPrinting cell is non-zero or it belongs only to nonprinting layers. |
The extents rectangle is determined using the center of the shape's strokes; it does not take into account the width of the strokes. Nor does the rectangle include any area covered by shadows or line end markers. Microsoft Visio does not expose a means to determine a shape's "black bits" box, that is, the extents box adjusted to account for stroke widths, shadows, and line ends.
A shape may have control points or connection points that lie outside any of the bounding rectangles reported by the shape. You can determine the position of control points and connection points by querying results of the shape's cells.
Example
The following procedure prints the dimensions of the bounding box of the selected shape in the Immediate window. If more than one shape is selected in the active window, a message box indicating an error is displayed. In all cases, results are reported in the drawing units of the page or master to which the shape belongs. This means that if the shape is a subshape of a group, visBBoxDrawingCoords is passed as a flag to the BoundingBox method.
If the shape is a guide, the procedure passes visBBoxIncludeGuides to the BoundingBox method so that the shape will be considered to have extent. Three rectangles are reported for the shape:
visBBoxUprightWH : an upright box that encloses the shape's width-height box
visBBoxUprightText : an upright box that encloses the shape's text box
visBBoxExtents : an upright box that encloses the shape's paths
To run this macro, make sure exactly one shape is selected on the Visio drawing page.
Public Sub BoundingBox_Example()
Dim vsoSelection As Visio.Selection
Set vsoSelection = ActiveWindow.Selection
vsoSelection.IterationMode = visSelModeSkipSub
If vsoSelection.Count <> 1 Then
MsgBox "BoundingBox_Example() expects exactly one selected shape."
Else
Dim vsoShape As Visio.Shape
Set vsoShape = vsoSelection(1)
Dim intFlags As Integer
intFlags = 0
If vsoShape.ContainingShape.Type = visTypeGroup Then
intFlags = visBBoxDrawingCoords
End If
If vsoShape.Type = visTypeGuide Then
intFlags = intFlags + visBBoxIncludeGuides
End If
Dim dblTop As Double
Dim dblBottom As Double
Dim dblLeft As Double
Dim dblRight As Double
vsoShape.BoundingBox intFlags + visBBoxUprightWH, dblLeft, dblBottom, dblRight, dblTop
Debug.Print "Upright WH "; _
"dblLeft:" & Application.FormatResult(dblLeft, "in", "", "#0.00 u"); _
"dblBottom:" & Application.FormatResult(dblBottom, "in", "", "#0.00 u"); _
"dblRight:" & Application.FormatResult(dblRight, "in", "", "#0.00 u"); _
"dblTop:" & Application.FormatResult(dblTop, "in", "", "#0.00 u")
vsoShape.BoundingBox intFlags + visBBoxUprightText, dblLeft, dblBottom, dblRight, dblTop
Debug.Print "Upright text "; _
"dblLeft:" & Application.FormatResult(dblLeft, "in", "", "#0.00 u"); _
"dblBottom:" & Application.FormatResult(dblBottom, "in", "", "#0.00 u"); _
"dblRight:" & Application.FormatResult(dblRight, "in", "", "#0.00 u"); _
"dblTop:" & Application.FormatResult(dblTop, "in", "", "#0.00 u")
vsoShape.BoundingBox intFlags + visBBoxExtents, dblLeft, dblBottom, dblRight, dblTop
Debug.Print "Bounding Box "; _
"dblLeft:" & Application.FormatResult(dblLeft, "in", "", "#0.00 u"); _
"dblBottom:" & Application.FormatResult(dblBottom, "in", "", "#0.00 u"); _
"dblRight:" & Application.FormatResult(dblRight, "in", "", "#0.00 u"); _
"dblTop:" & Application.FormatResult(dblTop, "in", "", "#0.00 u")
End If
End Sub
The following macro uses the BoundingBox method and the ShapesOverlap() function to determine if one shape (vsoShape2) overlaps another (vsoShape1).
Public Sub OverlappingShapes_Example()
Dim vsoShape1 As Visio.Shape
Dim vsoShape2 As Visio.Shape
Dim blsIsOverlapping As Boolean
Set vsoShape1 = Application.ActiveWindow.Page.Drop(Application.Documents.Item("BASIC_U.VSS").Masters.ItemU("Square"), 3, 9)
Set vsoShape2 = Application.ActiveWindow.Page.Drop(Application.Documents.Item("BASIC_U.VSS").Masters.ItemU("Pentagon"), 3, 8)
blsIsOverlapping = ShapesOverlap(vsoShape2, vsoShape1)
If blsIsOverlapping Then
Debug.Print "Shapes overlap."
Else
Debug.Print "Shapes don't overlap."
End If
End Sub
Private Function ShapesOverlap(vsoShape1 As IVShape, vsoShape2 As IVShape) As Boolean
Dim dblLeft1 As Double
Dim dblLeft2 As Double
Dim dblBottom1 As Double
Dim dblBottom2 As Double
Dim dblRight1 As Double
Dim dblRight2 As Double
Dim dblTop1 As Double
Dim dblTop2 As Double
vsoShape1.BoundingBox Flags + visBBoxExtents, dblLeft1, dblBottom1, dblRight1, dblTop1
vsoShape2.BoundingBox Flags + visBBoxExtents, dblLeft2, dblBottom2, dblRight2, dblTop2
If ((dblLeft2 >= dblLeft1 And dblLeft2 <= dblRight1) Or _
(dblRight2 >= dblLeft1 And dblRight2 <= dblRight1)) And _
((dblTop2 >= dblBottom1 And dblTop2 <= dblTop1) Or _
(dblBottom2 >= dblBottom1 And dblBottom2 <= dblTop1)) Then
ShapesOverlap = True
Else
ShapesOverlap = False
End If
End Function
Support and feedback
Have questions or feedback about Office VBA or this documentation? Please see Office VBA support and feedback for guidance about the ways you can receive support and provide feedback.