Set-EOPProtectionPolicyRule
This cmdlet is available only in the cloud-based service.
Use the Set-EOPProtectionPolicyRule cmdlet to modify rules that are associated with Exchange Online Protection (EOP) protections in preset security policies.
For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.
Syntax
Set-EOPProtectionPolicyRule
[-Identity] <RuleIdParameter>
[-Comments <String>]
[-Confirm]
[-ExceptIfRecipientDomainIs <Word[]>]
[-ExceptIfSentTo <RecipientIdParameter[]>]
[-ExceptIfSentToMemberOf <RecipientIdParameter[]>]
[-Name <String>]
[-Priority <Int32>]
[-RecipientDomainIs <Word[]>]
[-SentTo <RecipientIdParameter[]>]
[-SentToMemberOf <RecipientIdParameter[]>]
[-WhatIf]
[<CommonParameters>] Description
For more information about preset security policies in PowerShell, see Preset security policies in Exchange Online PowerShell.
Important
Different types of recipient conditions use AND logic (the recipient must satisfy all specified conditions). Different types of recipient exceptions use OR logic (the recipient must satisfy any of the specified exceptions). For more information, see Profiles in preset security policies.
You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.
Examples
Example 1
Set-EOPProtectionPolicyRule -Identity "Standard Preset Security Policy" -ExceptIfSentToMemberOf "Test Group1","Test Group2"This example provides exceptions to EOP protections in the Standard preset security policy for members of the specified groups.
Example 2
Set-EOPProtectionPolicyRule -Identity "Standard Preset Security Policy" -SentTo $null -ExceptIfSentTo $null -SentToMemberOf $null -ExceptIfSentToMemberOf $null -RecipientDomainIs $null -ExceptIfRecipientDomainIs $nullThis example removes all conditions and exceptions from the Standard preset security policy. No restrictions are placed on who the Defender for Office 365 protections apply to.
Parameters
-Comments
The Comments parameter specifies informative comments for the rule, such as what the rule is used for or how it has changed over time. The length of the comment can't exceed 1024 characters.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-Confirm
The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
- Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.
- Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-ExceptIfRecipientDomainIs
The ExceptIfRecipientDomainIs parameter specifies an exception that looks for recipients with email addresses in the specified domains. You can specify multiple domains separated by commas.
| Type: | Word[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-ExceptIfSentTo
The ExceptIfSentTo parameter specifies an exception that looks for recipients in messages. You can use any value that uniquely identifies the recipient. For example:
- Name
- Alias
- Distinguished name (DN)
- Canonical DN
- Email address
- GUID
You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".
| Type: | RecipientIdParameter[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-ExceptIfSentToMemberOf
The ExceptIfSentToMemberOf parameter specifies an exception that looks for messages sent to members of groups. You can use any value that uniquely identifies the group. For example:
- Name
- Alias
- Distinguished name (DN)
- Canonical DN
- Email address
- GUID
You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".
If you remove the group after you create the rule, no exception is made for messages that are sent to members of the group.
| Type: | RecipientIdParameter[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-Identity
The Identity parameter specifies the rule that you want to view. You can use any value that uniquely identifies the rule. For example:
- Name
- Distinguished name (DN)
- GUID
By default, the available rules (if they exist) are named Standard Preset Security Policy and Strict Preset Security Policy.
| Type: | RuleIdParameter |
| Position: | 0 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-Name
The Name parameter specifies a unique name for the rule. The maximum length is 64 characters.
By default, the rules are named Standard Preset Security Policy or Strict Preset Security Policy. We highly recommend that you use the default rule names for clarity and consistency.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-Priority
The Priority parameter specifies a priority value for the rule that determines the order of rule processing. A lower integer value indicates a higher priority, the value 0 is the highest priority, and rules can't have the same priority value.
The default value for the rule that's associated with the Strict preset security policy is 0, and the default value for the rule that's associated with the Standard preset security policy is 1.
You must use the default value for the rule.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-RecipientDomainIs
The RecipientDomainIs parameter specifies a condition that looks for recipients with email addresses in the specified domains. You can specify multiple domains separated by commas.
| Type: | Word[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-SentTo
The SentTo parameter specifies a condition that looks for recipients in messages. You can use any value that uniquely identifies the recipient. For example:
- Name
- Alias
- Distinguished name (DN)
- Canonical DN
- Email address
- GUID
You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".
| Type: | RecipientIdParameter[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-SentToMemberOf
The SentToMemberOf parameter specifies a condition that looks for messages sent to members of distribution groups, dynamic distribution groups, or mail-enabled security groups. You can use any value that uniquely identifies the group. For example:
- Name
- Alias
- Distinguished name (DN)
- Canonical DN
- Email address
- GUID
You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".
If you remove the group after you create the rule, no action is taken on messages that are sent to members of the group.
| Type: | RecipientIdParameter[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-WhatIf
The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |