Get-NetAdapterBinding
Gets a list of bindings for a network adapter.
Syntax
Get-NetAdapterBinding
[[-Name] <String[]>]
[-ComponentID <String[]>]
[-DisplayName <String[]>]
[-IncludeHidden]
[-AllBindings]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[<CommonParameters>] Get-NetAdapterBinding
-InterfaceDescription <String[]>
[-ComponentID <String[]>]
[-DisplayName <String[]>]
[-IncludeHidden]
[-AllBindings]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[<CommonParameters>] Description
The Get-NetAdapterBinding cmdlet gets a list of bindings for a network adapter. By default only the visible bindings shown in the Networking tab under the Network Adapter properties in Windows UI is returned. To get all properties for a network adapter, use the AllProperties parameter.
Examples
Example 1: Get bindings for the specified network adapter
PS C:\> Get-NetAdapterBinding -Name "MyAdapter"This command gets the bindings for the network adapter named MyAdapter.
Example 2: Get all of the binding for the specified network adapter in an unformatted list
PS C:\> Get-NetAdapterBinding -Name "MyAdapter" -AllBindingsThis command gets all of the bindings for the network adapter named MyAdapter as an unformatted list .
Example 3: Get the state of TCP/IPv4 on the specified network adapter using the display name
PS C:\> Get-NetAdapterBinding -Name "MyAdapter" -DisplayName "Internet Protocol Version 4 (TCP/IPv4)"This command gets the state of the TCP/IPv4 on the network adapter named MyAdapter using display name.
Example 4: Get the state of the TCP/IPv4 transport on the specified network adapter
PS C:\> Get-NetAdapterBinding -Name "MyAdapter" -ComponentID ms_tcpipThis command gets the state of the TCP/IPv4 transport on MyAdapter using component ID.
Example 5: Get the state of TCP/IPv4 and TCP/IPv6 on all visible network adapters using a search string
PS C:\> Get-NetAdapterBinding -Name "*" -DisplayName "Internet*"This command gets the state of TCP/IPv4 and TCP/IPv6 on all visible network adapters using wildcard characters.
Parameters
-AllBindings
Indicates that the cmdlet gets all the bindings for the network adapter.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AsJob
Runs the cmdlet as a background job.
Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt.
You can continue to work in the session while the job completes.
To manage the job, use the *-Job cmdlets.
To get the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShell® background jobs, see about_Jobs.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
| Type: | CimSession[] |
| Aliases: | Session |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ComponentID
Specifies an array of underlying names of the transport or filter in the following form: ms_xxxx, such as ms_tcpip.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisplayName
Specifies an array of transport or filter names shown in the Networking tab under the network adapter properties in Windows Server® 2012 and later.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IncludeHidden
Indicates that the cmdlet includes both visible and hidden network adapters in the operation. By default only visible network adapters are included. If a wildcard character is used in identifying a network adapter and this parameter has been specified, then the wildcard string is matched against both hidden and visible network adapters.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-InterfaceDescription
Specifies the network adapter interface description.
For a physical network adapter this is typically the name of the vendor of the network adapter followed by a part number and description, such as Contoso 12345 Gigabit Network Device.
| Type: | String[] |
| Aliases: | ifDesc, InstanceID |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Name
Specifies an array of network adapter names.
| Type: | String[] |
| Aliases: | ifAlias, InterfaceAlias |
| Position: | 0 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Inputs
None
Outputs
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.