Düzenle

Aracılığıyla paylaş


Creating a Windows PowerShell Drive Provider

This topic describes how to create a Windows PowerShell drive provider that provides a way to access a data store through a Windows PowerShell drive. This type of provider is also referred to as Windows PowerShell drive providers. The Windows PowerShell drives used by the provider provide the means to connect to the data store.

The Windows PowerShell drive provider described here provides access to a Microsoft Access database. For this provider, the Windows PowerShell drive represents the database (it is possible to add any number of drives to a drive provider), the top-level containers of the drive represent the tables in the database, and the items of the containers represent the rows in the tables.

Defining the Windows PowerShell Provider Class

Your drive provider must define a .NET class that derives from the System.Management.Automation.Provider.Drivecmdletprovider base class. Here is the class definition for this drive provider:

[CmdletProvider("AccessDB", ProviderCapabilities.None)]
public class AccessDBProvider : DriveCmdletProvider

Notice that in this example, the System.Management.Automation.Provider.Cmdletproviderattribute attribute specifies a user-friendly name for the provider and the Windows PowerShell specific capabilities that the provider exposes to the Windows PowerShell runtime during command processing. The possible values for the provider capabilities are defined by the System.Management.Automation.Provider.Providercapabilities enumeration. This drive provider does not support any of these capabilities.

Defining Base Functionality

As described in Design Your Windows PowerShell Provider, the System.Management.Automation.Provider.Drivecmdletprovider class derives from the System.Management.Automation.Provider.Cmdletprovider base class that defines the methods needed for initializing and uninitializing the provider. To implement functionality for adding session-specific initialization information and for releasing resources that are used by the provider, see Creating a Basic Windows PowerShell Provider. However, most providers (including the provider described here) can use the default implementation of this functionality that is provided by Windows PowerShell.

Creating Drive State Information

All Windows PowerShell providers are considered stateless, which means that your drive provider needs to create any state information that is needed by the Windows PowerShell runtime when it calls your provider.

For this drive provider, state information includes the connection to the database that is kept as part of the drive information. Here is code that shows how this information is stored in the System.Management.Automation.PSDriveinfo object that describes the drive:

internal class AccessDBPSDriveInfo : PSDriveInfo
{
    private OdbcConnection connection;

    /// <summary>
    /// ODBC connection information.
    /// </summary>
    public OdbcConnection Connection
    {
        get { return connection; }
        set { connection = value; }
    }

    /// <summary>
    /// Constructor that takes one argument
    /// </summary>
    /// <param name="driveInfo">Drive provided by this provider</param>
    public AccessDBPSDriveInfo(PSDriveInfo driveInfo)
        : base(driveInfo)
    { }

} // class AccessDBPSDriveInfo

Creating a Drive

To allow the Windows PowerShell runtime to create a drive, the drive provider must implement the System.Management.Automation.Provider.Drivecmdletprovider.Newdrive* method. The following code shows the implementation of the System.Management.Automation.Provider.Drivecmdletprovider.Newdrive* method for this drive provider:

      protected override PSDriveInfo NewDrive(PSDriveInfo drive)
      {
          // check if drive object is null
          if (drive == null)
          {
              WriteError(new ErrorRecord(
                  new ArgumentNullException("drive"), 
                  "NullDrive",
                  ErrorCategory.InvalidArgument, 
                  null)
              );
           
              return null;
          }
       
          // check if drive root is not null or empty
          // and if its an existing file
          if (String.IsNullOrEmpty(drive.Root) || (File.Exists(drive.Root) == false))
          {
              WriteError(new ErrorRecord(
                  new ArgumentException("drive.Root"), 
                  "NoRoot",
                  ErrorCategory.InvalidArgument, 
                  drive)
              );

              return null;
          }

          // create a new drive and create an ODBC connection to the new drive
          AccessDBPSDriveInfo accessDBPSDriveInfo = new AccessDBPSDriveInfo(drive);

          OdbcConnectionStringBuilder builder = new OdbcConnectionStringBuilder();

          builder.Driver = "Microsoft Access Driver (*.mdb)";
          builder.Add("DBQ", drive.Root);
         
          OdbcConnection conn = new OdbcConnection(builder.ConnectionString);
          conn.Open();
          accessDBPSDriveInfo.Connection = conn;

          return accessDBPSDriveInfo;
      } // NewDrive

Your override of this method should do the following:

Attaching Dynamic Parameters to NewDrive

The New-PSDrive cmdlet supported by your drive provider might require additional parameters. To attach these dynamic parameters to the cmdlet, the provider implements the System.Management.Automation.Provider.Drivecmdletprovider.Newdrivedynamicparameters* method. This method returns an object that has properties and fields with parsing attributes similar to a cmdlet class or a System.Management.Automation.Runtimedefinedparameterdictionary object.

This drive provider does not override this method. However, the following code shows the default implementation of this method:

Removing a Drive

To close the database connection, the drive provider must implement the System.Management.Automation.Provider.Drivecmdletprovider.Removedrive* method. This method closes the connection to the drive after cleaning up any provider-specific information.

The following code shows the implementation of the System.Management.Automation.Provider.Drivecmdletprovider.Removedrive* method for this drive provider:

protected override PSDriveInfo RemoveDrive(PSDriveInfo drive)
{
    // check if drive object is null
    if (drive == null)
    {
        WriteError(new ErrorRecord(
            new ArgumentNullException("drive"), 
            "NullDrive",
            ErrorCategory.InvalidArgument, 
            drive)
        );

       return null;
    }

    // close ODBC connection to the drive
    AccessDBPSDriveInfo accessDBPSDriveInfo = drive as AccessDBPSDriveInfo;

    if (accessDBPSDriveInfo == null)
    {
        return null;
    }
    accessDBPSDriveInfo.Connection.Close();
  
    return accessDBPSDriveInfo;
} // RemoveDrive

If the drive can be removed, the method should return the information passed to the method through the drive parameter. If the drive cannot be removed, the method should write an exception and then return null. If your provider does not override this method, the default implementation of this method just returns the drive information passed as input.

Initializing Default Drives

Your drive provider implements the System.Management.Automation.Provider.Drivecmdletprovider.Initializedefaultdrives* method to mount drives. For example, the Active Directory provider might mount a drive for the default naming context if the computer is joined to a domain.

This method returns a collection of drive information about the initialized drives, or an empty collection. The call to this method is made after the Windows PowerShell runtime calls the System.Management.Automation.Provider.Cmdletprovider.Start* method to initialize the provider.

This drive provider does not override the System.Management.Automation.Provider.Drivecmdletprovider.Initializedefaultdrives* method. However, the following code shows the default implementation, which returns an empty drive collection:

Things to Remember About Implementing InitializeDefaultDrives

All drive providers should mount a root drive to help the user with discoverability. The root drive might list locations that serve as roots for other mounted drives. For example, the Active Directory provider might create a drive that lists the naming contexts found in the namingContext attributes on the root Distributed System Environment (DSE). This helps users discover mount points for other drives.

Code Sample

For complete sample code, see AccessDbProviderSample02 Code Sample.

Testing the Windows PowerShell Drive Provider

When your Windows PowerShell provider has been registered with Windows PowerShell, you can test it by running the supported cmdlets on the command line, including any cmdlets made available by derivation. Let's test the sample drive provider.

  1. Run the Get-PSProvider cmdlet to retrieve the list of providers to ensure that the AccessDB drive provider is present:

    PS> Get-PSProvider

    The following output appears:

    Name                 Capabilities                  Drives
    ----                 ------------                  ------
    AccessDB             None                          {}
    Alias                ShouldProcess                 {Alias}
    Environment          ShouldProcess                 {Env}
    FileSystem           Filter, ShouldProcess         {C, Z}
    Function             ShouldProcess                 {function}
    Registry             ShouldProcess                 {HKLM, HKCU}
    
  2. Ensure that a database server name (DSN) exists for the database by accessing the Data Sources portion of the Administrative Tools for the operating system. In the User DSN table, double-click MS Access Database and add the drive path C:\ps\northwind.mdb.

  3. Create a new drive using the sample drive provider:

    new-psdrive -name mydb -root c:\ps\northwind.mdb -psprovider AccessDb`
    

    The following output appears:

    Name     Provider     Root                   CurrentLocation
    ----     --------     ----                   ---------------
    mydb     AccessDB     c:\ps\northwind.mdb
    
  4. Validate the connection. Because the connection is defined as a member of the drive, you can check it using the Get-PDDrive cmdlet.

    Note

    The user cannot yet interact with the provider as a drive, as the provider needs container functionality for that interaction. For more information, see Creating a Windows PowerShell Container Provider.

    PS> (get-psdrive mydb).connection

    The following output appears:

    ConnectionString  : Driver={Microsoft Access Driver (*.mdb)};DBQ=c:\ps\northwind.mdb
    ConnectionTimeout : 15
    Database          : c:\ps\northwind
    DataSource        : ACCESS
    ServerVersion     : 04.00.0000
    Driver            : odbcjt32.dll
    State             : Open
    Site              :
    Container         :
    
  5. Remove the drive and exit the shell:

    PS> remove-psdrive mydb
    PS> exit
    

See Also

Creating Windows PowerShell Providers

Design Your Windows PowerShell Provider

Creating a Basic Windows PowerShell Provider