Graphics Adapter Output Requirements to Support COPP
This section applies only to Windows Server 2003 SP1 and later, and Windows XP SP2 and later.
To support COPP, the physical output connector of the graphics adapter must perform the following tasks:
Protect key information
A certified output must protect key information that was issued to the output upon certification.
Restrict unauthorized components from accessing secure content
A certified output must prevent unauthorized software or hardware components from accessing content sent through a COPP secure channel. The certified output should only permit COPP commands to operate on data received through the COPP secure channel.
Switch to a failure mode if the output fails
If the certified output can no longer enforce the configuration profile specified at configuration time, then the output should cease decrypting incoming content and should send a status message to the application. The status message should indicate that the output can no longer perform as configured.
Geri Bildirim
https://aka.ms/ContentUserFeedback.
Çok yakında: 2024 boyunca, içerik için geri bildirim mekanizması olarak GitHub Sorunları’nı kullanımdan kaldıracak ve yeni bir geri bildirim sistemiyle değiştireceğiz. Daha fazla bilgi için bkz.Gönderin ve geri bildirimi görüntüleyin