Enabling Message-Signaled Interrupts in the Registry
To receive message-signaled interrupts (MSIs), a driver's INF file must enable MSIs in the registry during installation. Use the Interrupt Management\MessageSignaledInterruptProperties subkey of the device's hardware key to enable MSI support.
The MSISupported entry of Interrupt Management\MessageSignaledInterruptProperties is a REG_DWORD value that determines whether the device supports MSIs. Set MSISupported to 1 to enable MSI support.
You can also use the registry to specify the maximum number of MSIs to allocate for their device. The MessageNumberLimit entry of Interrupt Management\MessageSignaledInterruptProperties is a REG_DWORD value that specifies the maximum number of MSIs to allocate.
For multi-message MSI (available starting with PCI 2.2), MessageNumberLimit must be 1, 2, 4, 8, or 16. For MSI-X devices (available starting with PCI 3.0), MessageNumberLimit can be any number up to 2,048.
Use an INF AddReg Directive in your driver's INF file to set registry keys under the device's hardware key. For more information, see INF DDInstall.HW Section.
The following code example shows how to set the MSISupported entry under Interrupt Management\MessageSignaledInterruptProperties for the device. Note that Interrupt Management and Interrupt Management\MessageSignaledInterruptProperties keys are automatically created by the AddReg directive when adding the MSISupported value.
[mydevice.HW]
AddReg = mydevice_addreg
[mydevice_addreg]
HKR,Interrupt Management\MessageSignaledInterruptProperties,MSISupported,0x00010001,1
Geri Bildirim
https://aka.ms/ContentUserFeedback.
Çok yakında: 2024 boyunca, içerik için geri bildirim mekanizması olarak GitHub Sorunları’nı kullanımdan kaldıracak ve yeni bir geri bildirim sistemiyle değiştireceğiz. Daha fazla bilgi için bkz.Gönderin ve geri bildirimi görüntüleyin