Düzenle

Aracılığıyla paylaş


SIO_TCP_INITIAL_RTO control code

Description

The SIO_TCP_INITIAL_RTO control code configures initial retransmission timeout (RTO) parameters on a socket.

To perform this operation, call the WSAIoctl or WSPIoctl function with the following parameters.

int WSAIoctl(
  (socket) s,             // descriptor identifying a socket
  SIO_TCP_INITIAL_RTO,                // dwIoControlCode
  (LPVOID) lpvInBuffer,   // pointer to a TCP_INITIAL_RTO_PARAMETERS structure
  (DWORD) cbInBuffer,    // size, in bytes, of the input buffer
  (LPVOID) lpvOutBuffer,         // pointer to output buffer
  (DWORD) cbOutBuffer,       // size of output buffer
  (LPDWORD) lpcbBytesReturned,    // number of bytes returned
  (LPWSAOVERLAPPED) lpOverlapped,   // OVERLAPPED structure
  (LPWSAOVERLAPPED_COMPLETION_ROUTINE) lpCompletionRoutine,  // completion routine
);
int WSPIoctl(
  (socket) s,             // descriptor identifying a socket
  SIO_TCP_INITIAL_RTO,                // dwIoControlCode
  (LPVOID) lpvInBuffer,   // pointer to a TCP_INITIAL_RTO_PARAMETERS structure
  (DWORD) cbInBuffer,           // size, in bytes, of the input buffer
  (LPVOID) lpvOutBuffer,         // pointer to output buffer
  (DWORD) cbOutBuffer,       // size of output buffer
  (LPDWORD) lpcbBytesReturned,    // number of bytes returned
  (LPWSAOVERLAPPED) lpOverlapped,   // OVERLAPPED structure
  (LPWSAOVERLAPPED_COMPLETION_ROUTINE) lpCompletionRoutine,  // completion routine
  (LPWSATHREADID) lpThreadId,   // a WSATHREADID structure
  (LPINT) lpErrno   // a pointer to the error code.
);

Parameters

s

A descriptor identifying a socket.

dwIoControlCode

The control code for the operation. Use SIO_TCP_INITIAL_RTO for this operation.

lpvInBuffer

A pointer to the input buffer. This parameter contains a pointer to the TCP_INITIAL_RTO_PARAMETERS associated with the socket.

cbInBuffer

The size, in bytes, of the input buffer.

lpvOutBuffer

A pointer to the output buffer. This parameter is unused for this operation.

cbOutBuffer

The size, in bytes, of the output buffer. This parameter must be set to zero.

lpcbBytesReturned

A pointer to a variable that receives the size, in bytes, of the data stored in the output buffer.

If the output buffer is too small, the call fails, WSAGetLastError returns WSAEINVAL, and the lpcbBytesReturned parameter points to a DWORD value of zero.

If lpOverlapped is NULL, the DWORD value pointed to by the lpcbBytesReturned parameter that is returned on a successful call cannot be zero.

If the lpOverlapped parameter is not NULL for overlapped sockets, operations that cannot be completed immediately will be initiated, and completion will be indicated at a later time. The DWORD value pointed to by the lpcbBytesReturned parameter that is returned may be zero since the size of the data stored can't be determined until the overlapped operation has completed. The final completion status can be retrieved when the appropriate completion method is signaled when the operation has completed.

lpvOverlapped

A pointer to a WSAOVERLAPPED structure.

If socket s was created without the overlapped attribute, the lpOverlapped parameter is ignored.

If s was opened with the overlapped attribute and the lpOverlapped parameter is not NULL, the operation is performed as an overlapped (asynchronous) operation. In this case, lpOverlapped parameter must point to a valid WSAOVERLAPPED structure.

For overlapped operations, the WSAIoctl or WSPIoctl function returns immediately, and the appropriate completion method is signaled when the operation has been completed. Otherwise, the function does not return until the operation has been completed or an error occurs.

lpCompletionRoutine

Type: _In_opt_ LPWSAOVERLAPPED_COMPLETION_ROUTINE

A pointer to the completion routine called when the operation has been completed (ignored for non-overlapped sockets).

lpThreadId

A pointer to a WSATHREADID structure to be used by the provider in a subsequent call to WPUQueueApc. The provider should store the referenced WSATHREADID structure (not the pointer to same) until after the WPUQueueApc function returns.

Note This parameter applies only to the WSPIoctl function.

lpErrno

A pointer to the error code.

Note This parameter applies only to the WSPIoctl function.

Return value

If the operation completes successfully, the WSAIoctl or WSPIoctl function returns zero.

If the operation fails or is pending, the WSAIoctl or WSPIoctl function returns SOCKET_ERROR. To get extended error information, call WSAGetLastError.

Error code Meaning
WSA_IO_PENDING Overlapped I/O operation is in progress. This value is returned if an overlapped operation was successfully initiated and completion will be indicated at a later time.
WSA_OPERATION_ABORTED The I/O operation has been aborted because of either a thread exit or an application request. This error is returned if an overlapped operation was canceled due to the closure of the socket or the execution of the SIO_FLUSH IOCTL command.
WSAEACCES An attempt was made to access a socket in a way forbidden by its access permissions. This error is returned under several conditions that include the following: the user lacks the required administrative privileges on the local computer or the application is not running in an enhanced shell as the built-in Administrator (RunAs administrator).
WSAEFAULT The system detected an invalid pointer address in attempting to use a pointer argument in a call. This error is returned of the lpvInBuffer, lpvoutBuffer, lpcbBytesReturned, lpOverlapped or lpCompletionRoutine parameter is not totally contained in a valid part of the user address space.
WSAEINPROGRESS A blocking operation is currently executing. This error is returned if the function is invoked when a callback is in progress.
WSAEINTR A blocking operation was interrupted by a call to WSACancelBlockingCall. This error is returned if a blocking operation was interrupted.
WSAEINVAL An invalid argument was supplied. This error is returned if the dwIoControlCode parameter is not a valid command, or a specified input parameter is not acceptable, or the command is not applicable to the type of socket specified.
WSAENETDOWN A socket operation encountered a dead network. This error is returned if the network subsystem has failed.
WSAENOTSOCK An operation was attempted on something that is not a socket. This error is returned if the descriptor s is not a socket.
WSAEOPNOTSUPP The attempted operation is not supported for the type of object referenced. This error is returned if the specified IOCTL command is not supported. This error is also returned if the SIO_TCP_INITIAL_RTO IOCTL is not supported by the transport provider.

Remarks

An application can use the SIO_TCP_INITIAL_RTO IOCTL to control the initial (SYN / SYN+ACK) retransmission characteristics of a TCP socket if required. An application, if using this option, must supply suitable values before starting a TCP connection attempt on the socket.

The TCP_INITIAL_RTO_PARAMETERS IOCTL allows an application to configure the initial (SYN) retransmission timeout (RTO) used by the socket.

A pointer to a TCP_INITIAL_RTO_PARAMETERS structure passed in the lpvInBuffer parameter allows an application to configure the initial round trip time (RTT) used to compute the retransmission timeout. The application can also configure the number of retransmissions that will be attempted before the connection attempt fails.

See also

socket

TCP_INITIAL_RTO_PARAMETERS

WSAGetLastError

WSAGetOverlappedResult

WSAIoctl

WSAOVERLAPPED

WSASocketA

WSASocketW