Prepare a CentOS-based virtual machine for Azure

Стаття
08/22/2024

Caution

This article references CentOS, a Linux distribution that's nearing end-of-life (EOL) status. Consider your use and plan accordingly. For more information, see the CentOS end-of-life guidance.

Applies to: ✔️ Linux VMs ✔️ Flexible scale sets

Learn to create and upload an Azure virtual hard disk (VHD) that contains a CentOS-based Linux operating system (OS). For more information, see:

Prepare a CentOS 6.x virtual machine (VM) for Azure
Prepare a CentOS 7.0+ VM for Azure

Prerequisites

This article assumes that you've already installed a CentOS (or similar derivative) Linux OS to a VHD. Multiple tools exist to create .vhd files. An example is a virtualization solution such as Hyper-V. For instructions, see Install the Hyper-V role and configure a VM.

CentOS installation notes

For more tips on preparing Linux for Azure, see General Linux installation notes.
The VHDX format isn't supported in Azure, only fixed VHD. You can convert the disk to VHD format by using Hyper-V Manager or the convert-vhd cmdlet. If you're using VirtualBox, you select Fixed size as opposed to the default that's dynamically allocated when you create the disk.
The vfat kernel module must be enabled in the kernel.
When you install the Linux system, we recommend that you use standard partitions rather than Logical Volume Manager (LVM), which is often the default for many installations. Using partitions avoids LVM name conflicts with cloned VMs, particularly if an OS disk ever needs to be attached to another identical VM for troubleshooting. LVM or RAID can also be used on data disks.
Kernel support for mounting user-defined functions (UDF) file systems is necessary. At first boot on Azure, the provisioning configuration is passed to the Linux VM by using UDF-formatted media that's attached to the guest. The Azure Linux agent or cloud-init must mount the UDF file system to read its configuration and provision the VM.
Linux kernel versions below 2.6.37 don't support NUMA on Hyper-V with larger VM sizes. This issue primarily affects older distributions using the upstream Centos 2.6.32 kernel and was fixed in Centos 6.6 (kernel-2.6.32-504). Systems running custom kernels older than 2.6.37 or Red Hat Enterprise Linux (RHEL)-based kernels older than 2.6.32-504 must set the boot parameter numa=off on the kernel command line in grub.conf. For more information, see Red Hat KB 436883.
Don't configure a swap partition on the OS disk.
All VHDs on Azure must have a virtual size aligned to 1 MB. When you convert from a raw disk to VHD, you must ensure that the raw disk size is a multiple of 1 MB before conversion. For more information, see Linux installation notes.

Note

Cloud-init >= 21.2 removes the UDF requirement. But without the UDF module enabled, the CD-ROM won't mount during provisioning, which prevents custom data from being applied. A workaround for this situation is to apply custom data by using user data. Unlike custom data, user data isn't encrypted. For more information, see User data formats.

CentOS 6.x

Important

CentOS 6 has reached its EOL and is no longer supported by the CentOS community. No further updates or security patches will be released for this version, leaving it vulnerable to potential security risks. We strongly recommend that you upgrade to a more recent version of CentOS to ensure the safety and stability of your system. For further assistance, consult with your IT department or system administrator.

In Hyper-V Manager, select the VM.
Select Connect to open a console window for the VM.
In CentOS 6, NetworkManager can interfere with the Azure Linux agent. Uninstall this package:
```
sudo rpm -e --nodeps NetworkManager
```
Create or edit the file /etc/sysconfig/network and add the following text:
```
NETWORKING=yes
HOSTNAME=localhost.localdomain
```
Create or edit the file /etc/sysconfig/network-scripts/ifcfg-eth0 and add the following text:
```
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=dhcp
TYPE=Ethernet
USERCTL=no
PEERDNS=yes
IPV6INIT=no
```
Modify udev rules to avoid generating static rules for the Ethernet interfaces. These rules can cause problems when you clone a VM in Azure or Hyper-V:
```
sudo ln -s /dev/null /etc/udev/rules.d/75-persistent-net-generator.rules
sudo rm -f /etc/udev/rules.d/70-persistent-net.rules
```
Ensure that the network service starts at boot time:
```
sudo chkconfig network on
```

If you want to use the OpenLogic mirrors that are hosted within the Azure datacenters, replace the /etc/yum.repos.d/CentOS-Base.repo file with the following repositories. This action also adds the [openlogic] repository that includes extra packages, such as the Azure Linux agent:

[openlogic]
name=CentOS-$releasever - openlogic packages for $basearch
baseurl=http://olcentgbl.trafficmanager.net/openlogic/$releasever/openlogic/$basearch/
enabled=1
gpgcheck=0

[base]
name=CentOS-$releasever - Base
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os&infra=$infra
baseurl=http://olcentgbl.trafficmanager.net/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6

#released updates
[updates]
name=CentOS-$releasever - Updates
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates&infra=$infra
baseurl=http://olcentgbl.trafficmanager.net/centos/$releasever/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6

#additional packages that might be useful
[extras]
name=CentOS-$releasever - Extras
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras&infra=$infra
baseurl=http://olcentgbl.trafficmanager.net/centos/$releasever/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6

#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever - Plus
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus&infra=$infra
baseurl=http://olcentgbl.trafficmanager.net/centos/$releasever/centosplus/$basearch/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6

#contrib - packages by Centos Users
[contrib]
name=CentOS-$releasever - Contrib
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=contrib&infra=$infra
baseurl=http://olcentgbl.trafficmanager.net/centos/$releasever/contrib/$basearch/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6

Note

The rest of this article assumes that you're using at least the [openlogic] repo, which is used to install the Azure Linux agent.

Add the following line to /etc/yum.conf:
```
http_caching=packages
```
Clear the current yum metadata and update the system with the latest packages:
```
sudo yum clean all
```
Unless you're creating an image for an older version of CentOS, we recommend that you update all the packages to the latest:
```
sudo yum -y update
```
A reboot might be required after you run this command.
Optional: Install the drivers for the Linux Integration Services (LIS).

Important

The step is required for CentOS 6.3 and earlier and is optional for later releases.
```
sudo rpm -e hypervkvpd  ## (might return an error if not installed, that's OK)
sudo yum install microsoft-hyper-v
```
Alternatively, you can follow the manual installation instructions on the LIS download page to install the RPM onto your VM.
Install the Azure Linux agent and dependencies. Start and enable the waagent service:
```
sudo yum install python-pyasn1 WALinuxAgent
sudo service waagent start
sudo chkconfig waagent on
```
The WALinuxAgent package removes the NetworkManager and NetworkManager-gnome packages if they weren't already removed, as described in step 3.
Modify the kernel boot line in your grub configuration to include other kernel parameters for Azure. To do this step, open /boot/grub/menu.lst in a text editor and ensure that the default kernel includes the following parameters:
```
console=ttyS0 earlyprintk=ttyS0 rootdelay=300
```
This modification also ensures that all console messages are sent to the first serial port, which can assist Azure support with debugging issues.

We also recommend that you remove the following parameters:
```
rhgb quiet crashkernel=auto
```
Graphical and quiet boot aren't useful in a cloud environment where you want all the logs to be sent to the serial port. The crashkernel option can be left configured if you want. But this parameter reduces the amount of available memory in the VM by 128 MB or more, which might be a problem for smaller VM sizes.

Important

CentOS 6.5 and earlier must also set the kernel parameter numa=off. For more information, see Red Hat KB 436883.
Ensure that the Secure Shell server is installed and configured to start at boot time. This setting is usually the default.
Don't create swap space on the OS disk.

The Azure Linux agent can automatically configure swap space by using the local resource disk that's attached to the VM after the VM is provisioned on Azure. The local resource disk is a temporary disk and might be emptied when the VM is deprovisioned. After you install the Azure Linux agent (see the previous step), modify the following parameters in /etc/waagent.conf appropriately:
```
ResourceDisk.Format=y
ResourceDisk.Filesystem=ext4
ResourceDisk.MountPoint=/mnt/resource
ResourceDisk.EnableSwap=y
ResourceDisk.SwapSizeMB=2048 ## NOTE: set this to whatever you need it to be.
```
Deprovision the VM and prepare it for provisioning on Azure:
```
sudo waagent -force -deprovision+user
sudo export HISTSIZE=0
```
Note

If you're migrating a specific VM and don't want to create a generalized image, skip the deprovision step.
Select Action > Shut Down in Hyper-V Manager. Your Linux VHD is now ready to be uploaded to Azure.

CentOS 7.0+

Follow the steps in the next sections if you're using CentOS 7.0+.

Changes in CentOS 7 (and similar derivatives)

Preparing a CentOS 7 VM for Azure is similar to CentOS 6. Several significant differences are worth noting:

The NetworkManager package no longer conflicts with the Azure Linux agent. This package is installed by default and we recommend that you don't remove it.
GRUB2 is now used as the default bootloader, so the procedure for editing kernel parameters has changed. (See the "Configuration steps" section.)
XFS is now the default file system. The ext4 file system can still be used if you want.
Because CentOS 8 Stream and newer no longer include network.service by default, you need to install it manually:
```
sudo yum install network-scripts
sudo systemctl enable network.service
```

Configuration steps

In Hyper-V Manager, select the VM.
Select Connect to open a console window for the VM.
Create or edit the file /etc/sysconfig/network and add the following text:
```
NETWORKING=yes
HOSTNAME=localhost.localdomain
```

Create or edit the file /etc/sysconfig/network-scripts/ifcfg-eth0 and add the following text:

DEVICE=eth0
ONBOOT=yes
BOOTPROTO=dhcp
TYPE=Ethernet
USERCTL=no
PEERDNS=yes
IPV6INIT=no
NM_CONTROLLED=no

Modify udev rules to avoid generating static rules for the Ethernet interfaces. These rules can cause problems when you clone a VM in Azure or Hyper-V:
```
sudo ln -s /dev/null /etc/udev/rules.d/75-persistent-net-generator.rules
```

If you want to use the OpenLogic mirrors that are hosted within the Azure datacenters, replace the /etc/yum.repos.d/CentOS-Base.repo file with the following repositories. This action also adds the [openlogic] repository that includes packages for the Azure Linux agent:

[openlogic]
name=CentOS-$releasever - openlogic packages for $basearch
baseurl=http://olcentgbl.trafficmanager.net/openlogic/$releasever/openlogic/$basearch/
enabled=1
gpgcheck=0

[base]
name=CentOS-$releasever - Base
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os&infra=$infra
baseurl=http://olcentgbl.trafficmanager.net/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7

#released updates
[updates]
name=CentOS-$releasever - Updates
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates&infra=$infra
baseurl=http://olcentgbl.trafficmanager.net/centos/$releasever/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7

#additional packages that might be useful
[extras]
name=CentOS-$releasever - Extras
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras&infra=$infra
baseurl=http://olcentgbl.trafficmanager.net/centos/$releasever/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7

#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever - Plus
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus&infra=$infra
baseurl=http://olcentgbl.trafficmanager.net/centos/$releasever/centosplus/$basearch/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7

Note

The rest of this article assumes that you're using at least the [openlogic] repo, which is used to install the Azure Linux agent.

Clear the current yum metadata and install any updates:
```
sudo yum clean all
```
Unless you're creating an image for an older version of CentOS, we recommend that you update all the packages to the latest:
```
sudo yum -y update
```
A reboot might be required after you run this command.
Modify the kernel boot line in your grub configuration to include other kernel parameters for Azure. To do this step, open /etc/default/grub in a text editor and edit the GRUB_CMDLINE_LINUX parameter. For example:
```
GRUB_CMDLINE_LINUX="rootdelay=300 console=ttyS0 earlyprintk=ttyS0 net.ifnames=0"
```
This modification also ensures that all console messages are sent to the first serial port, which can assist Azure support with debugging issues. It also turns off the new CentOS 7 naming conventions for network interface cards. We also recommend that you remove the following parameters:
```
rhgb quiet crashkernel=auto
```
Graphical and quiet boot aren't useful in a cloud environment where you want all the logs to be sent to the serial port. The crashkernel option can be left configured if you want. But this parameter reduces the amount of available memory in the VM by 128 MB or more, which might be a problem for smaller VM sizes.
After you're finished editing /etc/default/grub, rebuild the grub configuration:
```
sudo grub2-mkconfig -o /boot/grub2/grub.cfg
```
Note

If you're uploading a UEFI-enabled VM, the command to update grub is grub2-mkconfig -o /boot/efi/EFI/centos/grub.cfg. Also, the vfat kernel module must be enabled in the kernel. Otherwise, provisioning fails.

Make sure the udf module is enabled. Removing or disabling it will cause a provisioning or boot failure. (_Cloud-init >= 21.2 removes the udf requirement. For more information, read the top of the document.)
If you're building the image from VMware, VirtualBox, or KVM, ensure that the Hyper-V drivers are included in the initramfs:
1. Edit /etc/dracut.conf and add content:
```
add_drivers+=" hv_vmbus hv_netvsc hv_storvsc "
```
2. Rebuild the initramfs:
```
sudo dracut -f -v
```

Install the Azure Linux agent and dependencies for Azure VM extensions:

sudo yum install python-pyasn1 WALinuxAgent
sudo systemctl enable waagent

Install cloud-init to handle the provisioning:

sudo yum install -y cloud-init cloud-utils-growpart gdisk hyperv-daemons

Configure waagent for cloud-init:

sudo sed -i 's/Provisioning.Agent=auto/Provisioning.Agent=auto/g' /etc/waagent.conf
sudo sed -i 's/ResourceDisk.Format=y/ResourceDisk.Format=n/g' /etc/waagent.conf
sudo sed -i 's/ResourceDisk.EnableSwap=y/ResourceDisk.EnableSwap=n/g' /etc/waagent.conf

sudo echo "Adding mounts and disk_setup to init stage"
sudo sed -i '/ - mounts/d' /etc/cloud/cloud.cfg
sudo sed -i '/ - disk_setup/d' /etc/cloud/cloud.cfg
sudo sed -i '/cloud_init_modules/a\\ - mounts' /etc/cloud/cloud.cfg
sudo sed -i '/cloud_init_modules/a\\ - disk_setup' /etc/cloud/cloud.cfg

sudo echo "Allow only Azure datasource, disable fetching network setting via IMDS"
sudo cat > /etc/cloud/cloud.cfg.d/91-azure_datasource.cfg <<EOF
datasource_list: [ Azure ]
datasource:
    Azure:
        apply_network_config: False
EOF

if [[ -f /mnt/swapfile ]]; then
echo Removing swapfile - RHEL uses a swapfile by default
swapoff /mnt/swapfile
rm /mnt/swapfile -f
fi

echo "Add console log file"
cat >> /etc/cloud/cloud.cfg.d/05_logging.cfg <<EOF

# This tells cloud-init to redirect its stdout and stderr to
# 'tee -a /var/log/cloud-init-output.log' so the user can see output
# there without needing to look on the console.
output: {all: '| tee -a /var/log/cloud-init-output.log'}
EOF

Swap configuration:

Don't create swap space on the OS disk.

Previously, the Azure Linux agent was used to automatically configure swap space by using the local resource disk that's attached to the VM after the VM is provisioned on Azure. However, cloud-init now handles this step. You must not use the Linux agent to format the resource disk to create the swap file. Modify the following parameters in /etc/waagent.conf appropriately:
```
sudo sed -i 's/ResourceDisk.Format=y/ResourceDisk.Format=n/g' /etc/waagent.conf
sudo sed -i 's/ResourceDisk.EnableSwap=y/ResourceDisk.EnableSwap=n/g' /etc/waagent.conf
```

If you want to mount, format, and create the swap file, you can either:

Pass this command in as a cloud-init configuration every time you create a VM.

Use a cloud-init directive baked into the image to do this step every time the VM is created:

sudo echo 'DefaultEnvironment="CLOUD_CFG=/etc/cloud/cloud.cfg.d/00-azure-swap.cfg"' >> /etc/systemd/system.conf
sudo cat > /etc/cloud/cloud.cfg.d/00-azure-swap.cfg << EOF
#cloud-config
# Generated by Azure cloud image build
disk_setup:
  ephemeral0:
    table_type: mbr
    layout: [66, [33, 82]]
    overwrite: True
fs_setup:
  - device: ephemeral0.1
    filesystem: ext4
  - device: ephemeral0.2
    filesystem: swap
mounts:
  - ["ephemeral0.1", "/mnt"]
  - ["ephemeral0.2", "none", "swap", "sw,nofail,x-systemd.requires=cloud-init.service,x-systemd.device-timeout=2", "0", "0"]
EOF

Run the following commands to deprovision the VM and prepare it for provisioning on Azure.

Note

If you're migrating a specific VM and don't want to create a generalized image, skip the deprovision step.
```
sudo rm -f /var/log/waagent.log
sudo cloud-init clean
sudo waagent -force -deprovision+user
sudo rm -f ~/.bash_history
sudo export HISTSIZE=0
```
Select Action > Shut Down in Hyper-V Manager. Your Linux VHD is now ready to be uploaded to Azure.

You're now ready to use your CentOS Linux VHD to create new VMs in Azure. If this is the first time that you're uploading the .vhd file to Azure, see Create a Linux VM from a custom disk.

Поділитися через

Prepare a CentOS-based virtual machine for Azure

Prerequisites

CentOS installation notes

CentOS 6.x

CentOS 7.0+

Changes in CentOS 7 (and similar derivatives)

Configuration steps

Зворотний зв’язок

Додаткові ресурси

Поділитися через

Prepare a CentOS-based virtual machine for Azure

Prerequisites

CentOS installation notes

CentOS 6.x

CentOS 7.0+

Changes in CentOS 7 (and similar derivatives)

Configuration steps

Related content

Зворотний зв’язок

Додаткові ресурси