`_open`, `_wopen`

Стаття
10/21/2022

Opens a file. These functions are deprecated because more-secure versions are available; see _sopen_s, _wsopen_s.

Syntax

int _open(
   const char *filename,
   int oflag [,
   int pmode]
);
int _wopen(
   const wchar_t *filename,
   int oflag [,
   int pmode]
);

Parameters

filename
File name.

oflag
The kind of operations allowed.

pmode
Permission mode.

Return value

Each of these functions returns a file descriptor for the opened file. A return value of -1 indicates an error; in that case errno is set to one of the following values.

`errno` value	Condition
`EACCES`	Tried to open a read-only file for writing, file's sharing mode doesn't allow the specified operations, or the given path is a directory.
`EEXIST`	`_O_CREAT` and `_O_EXCL` flags specified, but `filename` already exists.
`EINVAL`	Invalid `oflag` or `pmode` argument.
`EMFILE`	No more file descriptors are available (too many files are open).
`ENOENT`	File or path not found.

For more information about these and other return codes, see errno, _doserrno, _sys_errlist, and _sys_nerr.

Remarks

The _open function opens the file specified by filename and prepares it for reading or writing, as specified by oflag. _wopen is a wide-character version of _open; the filename argument to _wopen is a wide-character string. _wopen and _open behave identically otherwise.

Generic-text routine mappings

`<tchar.h>` routine	`_UNICODE` and `_MBCS` not defined	`_MBCS` defined	`_UNICODE` defined
`_topen`	`_open`	`_open`	`_wopen`

oflag is an integer expression formed from one or more of the following manifest constants or constant combinations, which are defined in <fcntl.h>.

`oflag` constant	Behavior
`_O_APPEND`	Moves the file pointer to the end of the file before every write operation.
`_O_BINARY`	Opens the file in binary (untranslated) mode. (See `fopen` for a description of binary mode.)
`_O_CREAT`	Creates a file and opens it for writing. Has no effect if the file specified by `filename` exists. The `pmode` argument is required when `_O_CREAT` is specified.
`_O_CREAT \| _O_SHORT_LIVED`	Creates a file as temporary and if possible doesn't flush to disk. The `pmode` argument is required when `_O_CREAT` is specified.
`_O_CREAT \| _O_TEMPORARY`	Creates a file as temporary; the file is deleted when the last file descriptor is closed. The `pmode` argument is required when `_O_CREAT` is specified. To preserve legacy behavior for app-compatibility, other processes aren't prevented from deleting this file.
`_O_CREAT \| _O_EXCL`	Returns an error value if a file specified by `filename` exists. Applies only when used with `_O_CREAT`.
`_O_NOINHERIT`	Prevents creation of a shared file descriptor.
`_O_RANDOM`	Specifies that caching is optimized for, but not restricted to, random access from disk.
`_O_RDONLY`	Opens a file for reading only. Can't be specified with `_O_RDWR` or `_O_WRONLY`.
`_O_RDWR`	Opens a file for both reading and writing. Can't be specified with `_O_RDONLY` or `_O_WRONLY`.
`_O_SEQUENTIAL`	Specifies that caching is optimized for, but not restricted to, sequential access from disk.
`_O_TEXT`	Opens a file in ANSI text (translated) mode. (For more information, see Text and binary mode file I/O and `fopen`.)
`_O_TRUNC`	Opens a file and truncates it to zero length; the file must have write permission. Can't be specified with `_O_RDONLY`. `_O_TRUNC` used with `_O_CREAT` opens an existing file or creates a file. Note: The `_O_TRUNC` flag destroys the contents of the specified file.
`_O_WRONLY`	Opens a file for writing only. Can't be specified with `_O_RDONLY` or `_O_RDWR`.
`_O_U16TEXT`	Opens a file in Unicode UTF-16 mode.
`_O_U8TEXT`	Opens a file in Unicode UTF-8 mode.
`_O_WTEXT`	Opens a file in Unicode mode.

To specify the file access mode, you must specify either _O_RDONLY, _O_RDWR, or _O_WRONLY. There's no default value for the access mode.

If _O_WTEXT is used to open a file for reading, _open reads the beginning of the file and checks for a byte order mark (BOM). If there's a BOM, the file is treated as UTF-8 or UTF-16LE, depending on the BOM. If no BOM is present, the file is treated as ANSI. When a file is opened for writing by using _O_WTEXT, UTF-16 is used. Regardless of any previous setting or byte order mark, if _O_U8TEXT is used, the file is always opened as UTF-8; if _O_U16TEXT is used, the file is always opened as UTF-16.

When a file is opened in Unicode mode by using _O_WTEXT, _O_U8TEXT, or _O_U16TEXT, input functions translate the data that's read from the file into UTF-16 data stored as type wchar_t. Functions that write to a file opened in Unicode mode expect buffers that contain UTF-16 data stored as type wchar_t. If the file is encoded as UTF-8, then UTF-16 data is translated into UTF-8 when it's written. The file's UTF-8-encoded content is translated into UTF-16 when it's read. An attempt to read or write an odd number of bytes in Unicode mode causes a parameter validation error. To read or write data that's stored in your program as UTF-8, use a text or binary file mode instead of a Unicode mode. You're responsible for any required encoding translation.

If _open is called with _O_WRONLY | _O_APPEND (append mode) and _O_WTEXT, _O_U16TEXT, or _O_U8TEXT, it first tries to open the file for reading and writing, read the BOM, then reopen it for writing only. If opening the file for reading and writing fails, it opens the file for writing only and uses the default value for the Unicode mode setting.

When two or more manifest constants are used to form the oflag argument, the constants are combined with the bitwise-OR operator ( | ). For a discussion of binary and text modes, see Text and binary mode file I/O.

The pmode argument is required only when _O_CREAT is specified. If the file already exists, pmode is ignored. Otherwise, pmode specifies the file permission settings, which are set when the new file is closed the first time. _open applies the current file-permission mask to pmode before the permissions are set. (For more information, see _umask.) pmode is an integer expression that contains one or both of the following manifest constants, which are defined in <sys\stat.h>.

`pmode`	Meaning
`_S_IREAD`	Only reading permitted.
`_S_IWRITE`	Writing permitted. (In effect, permits reading and writing.)
`_S_IREAD \| _S_IWRITE`	Reading and writing permitted.

When both constants are given, they're joined with the bitwise-OR operator ( | ). In Windows, all files are readable; write-only permission isn't available. Therefore, the modes _S_IWRITE and _S_IREAD | _S_IWRITE are equivalent.

If a value other than some combination of _S_IREAD and _S_IWRITE is specified for pmode—even if it would specify a valid pmode in another operating system—or if any value other than the allowed oflag values is specified, the function generates an assertion in Debug mode and invokes the invalid parameter handler, as described in Parameter validation. If execution is allowed to continue, the function returns -1 and sets errno to EINVAL.

Requirements

Function	Required header	Optional header
`_open`	`<io.h>`	`<fcntl.h>`, `<sys\types.h>`, `<sys\stat.h>`
`_wopen`	`<io.h>` or `<wchar.h>`	`<fcntl.h>`, `<sys\types.h>`, `<sys\stat.h>`

_open and _wopen are Microsoft extensions. For more compatibility information, see Compatibility.

Libraries

All versions of the C run-time libraries.

Example

// crt_open.c
// compile with: /W3
/* This program uses _open to open a file
* named CRT_OPEN.C for input and a file named CRT_OPEN.OUT
* for output. The files are then closed.
*/
#include <fcntl.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <io.h>
#include <stdio.h>

int main( void )
{
   int fh1, fh2;

   fh1 = _open( "CRT_OPEN.C", _O_RDONLY ); // C4996
   // Note: _open is deprecated; consider using _sopen_s instead
   if( fh1 == -1 )
      perror( "Open failed on input file" );
   else
   {
      printf( "Open succeeded on input file\n" );
      _close( fh1 );
   }

   fh2 = _open( "CRT_OPEN.OUT",
                _O_WRONLY | _O_CREAT,
                _S_IREAD | _S_IWRITE ); // C4996
   if( fh2 == -1 )
      perror( "Open failed on output file" );
   else
   {
      printf( "Open succeeded on output file\n" );
      _close( fh2 );
   }
}

Output

Open succeeded on input file
Open succeeded on output file

Поділитися через

`_open`, `_wopen`

Syntax

Parameters

Return value

Remarks

Generic-text routine mappings

Requirements

Libraries

Example

Output

See also

Зворотний зв’язок

Додаткові ресурси

Поділитися через

_open, _wopen

Syntax

Parameters

Return value

Remarks

Generic-text routine mappings

Requirements

Libraries

Example

Output

See also

Зворотний зв’язок

Додаткові ресурси

`_open`, `_wopen`