Byrefs

F# has two major feature areas that deal in the space of low-level programming:

• The byref/inref/outref types, which are managed pointers. They have restrictions on usage so that you cannot compile a program that is invalid at run time.
• A byref-like struct, which is a struct that has similar semantics and the same compile-time restrictions as byref<'T>. One example is Span<T>.

Syntax

// Byref types as parameters
let f (x: byref<'T>) = ()
let g (x: inref<'T>) = ()
let h (x: outref<'T>) = ()

// Calling a function with a byref parameter
let mutable x = 3
f &x

// Declaring a byref-like struct
open System.Runtime.CompilerServices

[<Struct; IsByRefLike>]
type S(count1: int, count2: int) =
    member x.Count1 = count1
    member x.Count2 = count2

Byref, inref, and outref

There are three forms of byref:

• inref<'T>, a managed pointer for reading the underlying value.
• outref<'T>, a managed pointer for writing to the underlying value.
• byref<'T>, a managed pointer for reading and writing the underlying value.

A byref<'T> can be passed where an inref<'T> is expected. Similarly, a byref<'T> can be passed where an outref<'T> is expected.

Using byrefs

To use a inref<'T>, you need to get a pointer value with &:

open System

let f (dt: inref<DateTime>) =
    printfn $"Now: %O{dt}"

let usage =
    let dt = DateTime.Now
    f &dt // Pass a pointer to 'dt'

To write to the pointer by using an outref<'T> or byref<'T>, you must also make the value you grab a pointer to mutable.

open System

let f (dt: byref<DateTime>) =
    printfn $"Now: %O{dt}"
    dt <- DateTime.Now

// Make 'dt' mutable
let mutable dt = DateTime.Now

// Now you can pass the pointer to 'dt'
f &dt

If you are only writing the pointer instead of reading it, consider using outref<'T> instead of byref<'T>.

Inref semantics

Consider the following code:

let f (x: inref<SomeStruct>) = x.SomeField

Semantically, this means the following:

• The holder of the x pointer may only use it to read the value.
• Any pointer acquired to struct fields nested within SomeStruct are given type inref<_>.

The following is also true:

• There is no implication that other threads or aliases do not have write access to x.
• There is no implication that SomeStruct is immutable by virtue of x being an inref.

However, for F# value types that are immutable, the this pointer is inferred to be an inref.

All of these rules together mean that the holder of an inref pointer may not modify the immediate contents of the memory being pointed to.

Outref semantics

The purpose of outref<'T> is to indicate that the pointer should only be written to. Unexpectedly, outref<'T> permits reading the underlying value despite its name. This is for compatibility purposes.

Semantically, outref<'T> is no different than byref<'T>, except for one difference: methods with outref<'T> parameters are implicitly constructed into a tuple return type, just like when calling a method with an [<Out>] parameter.

type C =
    static member M1(x, y: _ outref) =
        y <- x
        true

match C.M1 1 with
| true, 1 -> printfn "Expected" // Fine with outref, error with byref
| _ -> printfn "Never matched"

Interop with C#

C# supports the in ref and out ref keywords, in addition to ref returns. The following table shows how F# interprets what C# emits:

C# construct	F# infers
ref return value	outref<'T>
ref readonly return value	inref<'T>
in ref parameter	inref<'T>
out ref parameter	outref<'T>

The following table shows what F# emits:

F# construct	Emitted construct
inref<'T> argument	[In] attribute on argument
inref<'T> return	modreq attribute on value
inref<'T> in abstract slot or implementation	modreq on argument or return
outref<'T> argument	[Out] attribute on argument

Type inference and overloading rules

An inref<'T> type is inferred by the F# compiler in the following cases:

1. A .NET parameter or return type that has an IsReadOnly attribute.
2. The this pointer on a struct type that has no mutable fields.
3. The address of a memory location derived from another inref<_> pointer.

When an implicit address of an inref is being taken, an overload with an argument of type SomeType is preferred to an overload with an argument of type inref<SomeType>. For example:

type C() =
    static member M(x: System.DateTime) = x.AddDays(1.0)
    static member M(x: inref<System.DateTime>) = x.AddDays(2.0)
    static member M2(x: System.DateTime, y: int) = x.AddDays(1.0)
    static member M2(x: inref<System.DateTime>, y: int) = x.AddDays(2.0)

let res = System.DateTime.Now
let v =  C.M(res)
let v2 =  C.M2(res, 4)

In both cases, the overloads taking System.DateTime are resolved rather than the overloads taking inref<System.DateTime>.

Byref-like structs

In addition to the byref/inref/outref trio, you can define your own structs that can adhere to byref-like semantics. This is done with the IsByRefLikeAttribute attribute:

open System
open System.Runtime.CompilerServices

[<IsByRefLike; Struct>]
type S(count1: Span<int>, count2: Span<int>) =
    member x.Count1 = count1
    member x.Count2 = count2

IsByRefLike does not imply Struct. Both must be present on the type.

A "byref-like" struct in F# is a stack-bound value type. It is never allocated on the managed heap. A byref-like struct is useful for high-performance programming, as it is enforced with set of strong checks about lifetime and non-capture. The rules are:

• They can be used as function parameters, method parameters, local variables, method returns.
• They cannot be static or instance members of a class or normal struct.
• They cannot be captured by any closure construct (async methods or lambda expressions).
• They cannot be used as a generic parameter.

This last point is crucial for F# pipeline-style programming, as |> is a generic function that parameterizes its input types. This restriction may be relaxed for |> in the future, as it is inline and does not make any calls to non-inlined generic functions in its body.

Although these rules strongly restrict usage, they do so to fulfill the promise of high-performance computing in a safe manner.

Byref returns

Byref returns from F# functions or members can be produced and consumed. When consuming a byref-returning method, the value is implicitly dereferenced. For example:

let squareAndPrint (data : byref<int>) =
    let squared = data*data    // data is implicitly dereferenced
    printfn $"%d{squared}"

To return a value byref, the variable that contains the value must live longer than the current scope. Also, to return byref, use &value (where value is a variable that lives longer than the current scope).

let mutable sum = 0
let safeSum (bytes: Span<byte>) =
    for i in 0 .. bytes.Length - 1 do
        sum <- sum + int bytes[i]
    &sum  // sum lives longer than the scope of this function.

To avoid the implicit dereference, such as passing a reference through multiple chained calls, use &x (where x is the value).

You can also directly assign to a return byref. Consider the following (highly imperative) program:

type C() =
    let mutable nums = [| 1; 3; 7; 15; 31; 63; 127; 255; 511; 1023 |]

    override _.ToString() = String.Join(' ', nums)

    member _.FindLargestSmallerThan(target: int) =
        let mutable ctr = nums.Length - 1

        while ctr > 0 && nums[ctr] >= target do ctr <- ctr - 1

        if ctr > 0 then &nums[ctr] else &nums[0]

[<EntryPoint>]
let main argv =
    let c = C()
    printfn $"Original sequence: %O{c}"

    let v = &c.FindLargestSmallerThan 16

    v <- v*2 // Directly assign to the byref return

    printfn $"New sequence:      %O{c}"

    0 // return an integer exit code

This is the output:

Original sequence: 1 3 7 15 31 63 127 255 511 1023
New sequence:      1 3 7 30 31 63 127 255 511 1023

Scoping for byrefs

A let-bound value cannot have its reference exceed the scope in which it was defined. For example, the following is disallowed:

let test2 () =
    let x = 12
    &x // Error: 'x' exceeds its defined scope!

let test () =
    let x =
        let y = 1
        &y // Error: `y` exceeds its defined scope!
    ()

This prevents you from getting different results depending on if you compile with optimizations or not.