Guaranteed Encryption

The Guaranteed Encryption IPsec policy scenario requires IPsec encryption for all matching traffic. This policy must be specified in conjunction with one of the transport mode policy options.

Guaranteed Encryption is typically used to encrypt sensitive traffic on a per application basis.

An example of a possible Guaranteed Encryption scenario is "Secure all unicast data traffic, except ICMP, using IPsec transport mode, enable negotiation discovery, and require guaranteed encryption for all unicast traffic corresponding to TCP local port 5555."

To implement this example programmatically, use the following WFP configuration.

At FWPM_LAYER_IKEEXT_V{4|6} setup MM negotiation policy

1. Add one or both of the following MM policy provider contexts.

   • For IKE, a policy provider context of type FWPM_IPSEC_IKE_MM_CONTEXT.
   • For AuthIP, a policy provider context of type FWPM_IPSEC_AUTHIP_MM_CONTEXT.

   Note

   A common keying module will be negotiated and the corresponding MM policy will be applied. AuthIP is the preferred keying module if both IKE and AuthIP are supported.

2. For each of the contexts added in step 1, add a filter with the following properties.

   Filter property	Value
   Filtering conditions	Empty. All traffic will match the filter.
   providerContextKey	GUID of the MM provider context added in step 1.

At FWPM_LAYER_IPSEC_V{4|6} setup QM and EM negotiation policy

1. Add one or both of the following QM transport mode policy provider contexts and set the IPSEC_POLICY_FLAG_ND_SECURE flag.

   • For IKE, a policy provider context of type FWPM_IPSEC_IKE_QM_TRANSPORT_CONTEXT.
   • For AuthIP, a policy provider context of type FWPM_IPSEC_AUTHIP_QM_TRANSPORT_CONTEXT. This context can optionally contain the AuthIP Extended Mode (EM) negotiation policy.

   Note

   A common keying module will be negotiated and the corresponding QM policy will be applied. AuthIP is the preferred keying module if both IKE and AuthIP are supported.

2. For each of the contexts added in step 1, add a filter with the following properties.

   Filter property	Value
   Filtering conditions	Empty. All traffic will match the filter.
   providerContextKey	GUID of the QM provider context added in step 1.

At FWPM_LAYER_INBOUND_TRANSPORT_V{4|6} setup inbound per-packet filtering rules

1. Add a filter with the following properties.

   Filter property	Value
   FWPM_CONDITION_IP_LOCAL_ADDRESS_TYPE filtering condition	NlatUnicast
   action.type	FWP_ACTION_CALLOUT_TERMINATING
   action.calloutKey	FWPM_CALLOUT_IPSEC_INBOUND_TRANSPORT_V{4|6}
   rawContext	FWPM_CONTEXT_IPSEC_INBOUND_PERSIST_CONNECTION_SECURITY

2. Exempt ICMP traffic from IPsec by adding a filter with the following properties.

   Filter property	Value
   FWPM_CONDITION_IP_LOCAL_ADDRESS_TYPE filtering condition	NlatUnicast
   FWPM_CONDITION_IP_PROTOCOL filtering condition	**IPPROTO_ICMP{V6}**These constants are defined in winsock2.h.
   action.type	FWP_ACTION_PERMIT
   weight	FWPM_WEIGHT_RANGE_IKE_EXEMPTIONS

At FWPM_LAYER_OUTBOUND_TRANSPORT_V{4|6} setup outbound per-packet filtering rules

1. Add a filter with the following properties.

   Filter property	Value
   FWPM_CONDITION_IP_LOCAL_ADDRESS_TYPE filtering condition	NlatUnicast
   action.type	FWP_ACTION_CALLOUT_TERMINATING
   action.calloutKey	FWPM_CALLOUT_IPSEC_OUTBOUND_TRANSPORT_V{4|6}
   rawContext	FWPM_CONTEXT_IPSEC_OUTBOUND_NEGOTIATE_DISCOVER

2. Exempt ICMP traffic from IPsec by adding a filter with the following properties.

   Filter property	Value
   FWPM_CONDITION_IP_LOCAL_ADDRESS_TYPE filtering condition	NlatUnicast
   FWPM_CONDITION_IP_PROTOCOL filtering condition	**IPPROTO_ICMP{V6}**These constants are defined in winsock2.h.
   action.type	FWP_ACTION_PERMIT
   weight	FWPM_WEIGHT_RANGE_IKE_EXEMPTIONS

At FWPM_LAYER_ALE_AUTH_RECV_ACCEPT_V{4|6} setup inbound per-connection filtering rules

1. Add a filter with the following properties. This filter will only allow inbound connection attempts if they are secured by IPsec.

   Filter property	Value
   FWPM_CONDITION_IP_LOCAL_ADDRESS_TYPE filtering condition	NlatUnicast
   action.type	FWP_ACTION_CALLOUT_TERMINATING
   action.calloutKey	FWPM_CALLOUT_IPSEC_INBOUND_INITIATE_SECURE_V{4|6}

2. Exempt ICMP traffic from IPsec by adding a filter with the following properties.

   Filter property	Value
   FWPM_CONDITION_IP_LOCAL_ADDRESS_TYPE filtering condition	NlatUnicast
   FWPM_CONDITION_IP_PROTOCOL filtering condition	**IPPROTO_ICMP{V6}**These constants are defined in winsock2.h.
   action.type	FWP_ACTION_PERMIT
   weight	FWPM_WEIGHT_RANGE_IKE_EXEMPTIONS

3. Add a filter with the following properties. This filter will only permit inbound connections to TCP port 5555 if they are encrypted.

   Filter property	Value
   FWPM_CONDITION_IP_LOCAL_ADDRESS_TYPE filtering condition	NlatUnicast
   FWPM_CONDITION_IP_PROTOCOL filtering condition	IPPROTO_TCPThis constant is defined in winsock2.h.
   FWPM_CONDITION_IP_LOCAL_PORT filtering condition	5555
   action.type	FWP_ACTION_CALLOUT_TERMINATING
   action.calloutKey	FWPM_CALLOUT_IPSEC_INBOUND_INITIATE_SECURE_V{4|6}
   rawContext	FWPM_CONTEXT_ALE_SET_CONNECTION_REQUIRE_IPSEC_ENCRYPTION

At FWPM_LAYER_ALE_AUTH_CONNECT_V{4|6} setup outbound per-connection filtering rules

• Add a filter with the following properties. This filter will only permit outbound connections from TCP port 5555 if they are encrypted.

  Filter property	Value
  FWPM_CONDITION_IP_LOCAL_ADDRESS_TYPE filtering condition	NlatUnicast
  FWPM_CONDITION_IP_PROTOCOL filtering condition	IPPROTO_TCPThis constant is defined in winsock2.h.
  FWPM_CONDITION_IP_LOCAL_PORT filtering condition	5555
  action.type	FWP_ACTION_CALLOUT_TERMINATING
  action.calloutKey	FWPM_CALLOUT_IPSEC_ALE_CONNECT_V{4|6}
  rawContext	FWPM_CONTEXT_ALE_SET_CONNECTION_REQUIRE_IPSEC_ENCRYPTION

Related topics

Sample code: Using Transport Mode

ALE Layers

Built-in Callout Identifiers

Filtering Conditions

Filtering Layer Identifiers

FWPM_ACTION0

FWPM_PROVIDER_CONTEXT_TYPE