Edit

MgmDeleteGroupMembershipEntry function (mgm.h)

The MgmDeleteGroupMembershipEntry function notifies the multicast group manager that there are no more receivers present for the specified groups on the specified interface.

A multicast routing protocol calls this function after it is notified that there are no more receivers for a multicast group on an interface. The protocol must call this function to stop multicast data from being forwarded out over an interface.

Syntax

DWORD MgmDeleteGroupMembershipEntry(
  [in] HANDLE hProtocol,
  [in] DWORD  dwSourceAddr,
  [in] DWORD  dwSourceMask,
  [in] DWORD  dwGroupAddr,
  [in] DWORD  dwGroupMask,
  [in] DWORD  dwIfIndex,
  [in] DWORD  dwIfNextHopIPAddr,
  [in] DWORD  dwFlags
);

Parameters

[in] hProtocol

Handle to the protocol obtained from a previous call to MgmRegisterMProtocol.

[in] dwSourceAddr

Specifies the source address from which to stop receiving multicast data. Specify zero to stop receiving data from all sources (a wildcard receiver for a group); otherwise, specify the IP address of the source or source network.

To specify a range of source addresses, specify the source network using dwSourceAddr, and specify a subnet mask using dwSourceMask.

[in] dwSourceMask

Specifies the subnet mask that corresponds to dwSourceAddr. The dwSourceAddr and dwSourceMask parameters are used together to define a range of sources from which to stop receiving multicast data.

Specify zero for this parameter if zero was specified for dwSourceAddr (a wildcard receiver).

[in] dwGroupAddr

Specifies the multicast group for which to stop receiving data. Specify zero to stop receiving all groups (a wildcard receiver); otherwise, specify the IP address of the group.

To specify a range of group addresses, specify the group address using dwGroupAddr, and specify a subnet mask using dwGroupMask.

[in] dwGroupMask

Specifies the subnet mask that corresponds to dwGroupAddr. The dwGroupAddr and dwGroupMask parameters are used together to define a range of multicast groups.

Specify zero for this parameter if zero was specified for dwGroupAddr (a wildcard receiver).

[in] dwIfIndex

Specifies the interface on which to delete the group membership. Multicast data for the specified groups are no longer forwarded out over this interface.

[in] dwIfNextHopIPAddr

Specifies the address of the next hop that corresponds to the index specified by dwIfIndex. The dwIfIndex and dwIfNextHopIPAddr parameters uniquely identify a next hop on point-to-multipoint interfaces. A point-to-multipoint interface is a connection where one interface connects to multiple networks. Examples of point-to-multipoint interfaces include non-broadcast multiple access (NBMA) interfaces and the internal interface on which all dial-up clients connect.

For broadcast interfaces (such as Ethernet interfaces) or point-to-point interfaces, which are identified by only the value of dwIfIndex, specify zero.

[in] dwFlags

Specifies any additional processing that must take place when the group membership is removed. Valid values are:

Value Meaning
MGM_JOIN_STATE_FLAG
 Remove group membership for the specified source and group. Update any forwarding entries for the specified source group to reflect this change in group membership.
MGM_FORWARD_STATE
 Remove the specified interface from the list of outgoing interfaces for the forwarding entry that corresponds to the specified source and group.

Return value

If the function succeeds, the return value is NO_ERROR.

If the function fails, the return value is one of the following error codes.

Value Meaning
ERROR_CAN_NOT_COMPLETE
 Could not complete the call to this function.
ERROR_INVALID_PARAMETER
 Invalid handle to a protocol, or the interface is owned by another protocol.
ERROR_NOT_FOUND
 The specified interface was not found.
 
 

Remarks

This version of the MGM API supports only wildcard sources or specific sources, not a range of sources. The same restriction applies to groups (that is, no group ranges are permitted).

When this function is called, the multicast group manager may invoke the PMGM_PRUNE_ALERT_CALLBACK callback to notify other routing protocols that no more receivers are present for the specified group.

Requirements

Requirement Value
Minimum supported client None supported
Minimum supported server Windows 2000 Server [desktop apps only]
Target Platform Windows
Header mgm.h
Library Rtm.lib
DLL Rtm.dll

See also

MgmAddGroupMembershipEntry

PMGM_PRUNE_ALERT_CALLBACK

  • Last updated on