垃圾回收通知

项目
04/06/2023

在有些情况下，公共语言运行时执行的完整垃圾回收（即第 2 代回收）可能会对性能产生负面影响。特别是，处理大量请求的服务器可能会出现此问题；在这种情况下，长时间垃圾回收会导致请求超时。为了防止在关键时期发生完全回收，可以接收即将执行完全垃圾回收的通知，再采取措施将工作负载重定向到另一个服务器实例。也可以自行诱导回收，前提是当前服务器实例不需要处理请求。

RegisterForFullGCNotification 方法注册为，在运行时检测到即将执行完全垃圾回收时发出通知。此通知分为两个部分：完全垃圾回收何时即将执行，以及完全垃圾回收何时完成。

警告

当启用了 <gcConcurrent> 配置元素时，如果整个 GC 是作为后台 GC 完成的，WaitForFullGCComplete 可能会返回 NotApplicable GCNotificationStatus。

若要确定何时发出通知，请使用 WaitForFullGCApproach 和 WaitForFullGCComplete 方法。通常，在 while 循环中使用这些方法，以持续获取表示通知状态的 GCNotificationStatus 枚举。如果值为 Succeeded，可以执行下列操作：

为了响应使用 WaitForFullGCApproach 方法获得的通知，可以重定向工作负载，并能自行诱导回收。
为了响应使用 WaitForFullGCComplete 方法获得的通知，可以让当前服务器实例再次用于处理请求。也可以收集信息。例如，可以使用 CollectionCount 方法记录回收次数。

WaitForFullGCApproach 和 WaitForFullGCComplete 方法要配合使用。使用一个方法，而不使用另一个方法，可能会生成不确定的结果。

完全垃圾回收

如果发生下列任一情况，运行时就会执行完全垃圾回收：

足够多的内存已提升到第 2 代，导致执行下一个第 2 代回收。
足够多的内存已提升到大型对象堆，导致执行下一个第 2 代回收。
由于其他因素，导致第 1 代回收升级为第 2 代回收。

在 RegisterForFullGCNotification 方法中指定的阈值适用于前两种情况。不过，在第一种情况下，不一定会在与指定的阈值相称的时间收到通知，原因有下面两个：

运行时不检查每个小型对象分配（出于性能考虑）。
只有第 1 代回收将内存提升到第 2 代。

第三种情况也加剧了通知接收时间的不确定性。可以在此期间重定向请求，或在可以更好适应时自行诱导回收，从而减轻不合时宜的完全垃圾回收造成的影响。尽管并不保证有效，但确实证明这是非常实用的方法。

通知阈值参数

RegisterForFullGCNotification 方法包含两个参数，用于指定第 2 代对象和大型对象堆的阈值。如果达到这些值，就应发出垃圾回收通知。下表介绍了这些参数。

参数	描述
`maxGenerationThreshold`	介于 1 和 99 之间的数字，指定根据在第 2 代中提升的对象，应何时发出通知。
`largeObjectHeapThreshold`	介于 1 和 99 之间的数字，指定根据大型对象堆中分配的对象，应何时发出通知。

如果指定的值过高，很可能会出现的情况是，将会收到通知，但在运行时执行回收前等待的时间太长。如果自行诱导回收，回收的对象可能会多于在运行时执行回收时回收的对象。

如果指定的值过低，在运行时执行回收前等待通知的时间可能不够长。

示例

描述

在下面的示例中，一组服务器处理传入的 Web 请求。为了模拟处理请求的工作负载，将字节数组添加到 List<T> 集合中。每个服务器都会注册获取垃圾回收通知，再对 WaitForFullGCProc 用户方法启动线程，以持续监视 WaitForFullGCApproach 和 WaitForFullGCComplete 方法返回的 GCNotificationStatus 枚举。

在通知发出时，WaitForFullGCApproach 和 WaitForFullGCComplete 方法调用它们各自的事件处理用户方法：

OnFullGCApproachNotify

此方法调用 RedirectRequests 用户方法，指示请求队列服务器暂停向服务器发送请求。具体模拟方式是，将类级别变量 bAllocate 设置为 false，这样就不会再分配对象。

接下来，调用 FinishExistingRequests 用户方法，完成处理挂起的服务器请求。具体模拟方式是，清除 List<T> 集合。

最后，由于工作负载很轻，诱导垃圾回收。
OnFullGCCompleteNotify

此方法调用用户方法 AcceptRequests 以继续接受请求，因为服务器不再易受完全垃圾回收影响。此操作的具体模拟方式是，将 bAllocate 变量设置为 true，以便能够继续将对象添加到 List<T> 集合。

下面的代码包含示例的 Main 方法。

using namespace System;
using namespace System::Collections::Generic;
using namespace System::Threading;

namespace GCNotify
{
    ref class Program
    {
    private:
        // Variable for continual checking in the
        // While loop in the WaitForFullGCProc method.
        static bool checkForNotify = false;

        // Variable for suspending work
        // (such servicing allocated server requests)
        // after a notification is received and then
        // resuming allocation after inducing a garbage collection.
        static bool bAllocate = false;

        // Variable for ending the example.
        static bool finalExit = false;

        // Collection for objects that
        // simulate the server request workload.
        static List<array<Byte>^>^ load = gcnew List<array<Byte>^>();


    public:
        static void Main()
        {
            try
            {
                // Register for a notification.
                GC::RegisterForFullGCNotification(10, 10);
                Console::WriteLine("Registered for GC notification.");

                checkForNotify = true;
                bAllocate = true;

                // Start a thread using WaitForFullGCProc.
                Thread^ thWaitForFullGC = gcnew Thread(gcnew ThreadStart(&WaitForFullGCProc));
                thWaitForFullGC->Start();

                // While the thread is checking for notifications in
                // WaitForFullGCProc, create objects to simulate a server workload.
                try
                {
                    int lastCollCount = 0;
                    int newCollCount = 0;


                    while (true)
                    {
                        if (bAllocate)
                        {
                            load->Add(gcnew array<Byte>(1000));
                            newCollCount = GC::CollectionCount(2);
                            if (newCollCount != lastCollCount)
                            {
                                // Show collection count when it increases:
                                Console::WriteLine("Gen 2 collection count: {0}", GC::CollectionCount(2).ToString());
                                lastCollCount = newCollCount;
                            }

                            // For ending the example (arbitrary).
                            if (newCollCount == 500)
                            {
                                finalExit = true;
                                checkForNotify = false;
                                break;
                            }
                        }
                    }

                }
                catch (OutOfMemoryException^)
                {
                    Console::WriteLine("Out of memory.");
                }


                finalExit = true;
                checkForNotify = false;
                GC::CancelFullGCNotification();

            }
            catch (InvalidOperationException^ invalidOp)
            {

                Console::WriteLine("GC Notifications are not supported while concurrent GC is enabled.\n"
                    + invalidOp->Message);
            }
        }

    public:
        static void OnFullGCApproachNotify()
        {
            Console::WriteLine("Redirecting requests.");

            // Method that tells the request queuing
            // server to not direct requests to this server.
            RedirectRequests();

            // Method that provides time to
            // finish processing pending requests.
            FinishExistingRequests();

            // This is a good time to induce a GC collection
            // because the runtime will induce a full GC soon.
            // To be very careful, you can check precede with a
            // check of the GC.GCCollectionCount to make sure
            // a full GC did not already occur since last notified.
            GC::Collect();
            Console::WriteLine("Induced a collection.");

        }


    public:
        static void OnFullGCCompleteEndNotify()
        {
            // Method that informs the request queuing server
            // that this server is ready to accept requests again.
            AcceptRequests();
            Console::WriteLine("Accepting requests again.");
        }

    public:
        static void WaitForFullGCProc()
        {
            while (true)
            {
                // CheckForNotify is set to true and false in Main.
                while (checkForNotify)
                {
                    // Check for a notification of an approaching collection.
                    GCNotificationStatus s = GC::WaitForFullGCApproach();
                    if (s == GCNotificationStatus::Succeeded)
                    {
                        Console::WriteLine("GC Notification raised.");
                        OnFullGCApproachNotify();
                    }
                    else if (s == GCNotificationStatus::Canceled)
                    {
                        Console::WriteLine("GC Notification cancelled.");
                        break;
                    }
                    else
                    {
                        // This can occur if a timeout period
                        // is specified for WaitForFullGCApproach(Timeout)
                        // or WaitForFullGCComplete(Timeout)
                        // and the time out period has elapsed.
                        Console::WriteLine("GC Notification not applicable.");
                        break;
                    }

                    // Check for a notification of a completed collection.
                    s = GC::WaitForFullGCComplete();
                    if (s == GCNotificationStatus::Succeeded)
                    {
                        Console::WriteLine("GC Notification raised.");
                        OnFullGCCompleteEndNotify();
                    }
                    else if (s == GCNotificationStatus::Canceled)
                    {
                        Console::WriteLine("GC Notification cancelled.");
                        break;
                    }
                    else
                    {
                        // Could be a time out.
                        Console::WriteLine("GC Notification not applicable.");
                        break;
                    }
                }


                Thread::Sleep(500);
                // FinalExit is set to true right before
                // the main thread cancelled notification.
                if (finalExit)
                {
                    break;
                }
            }
        }

    private:
        static void RedirectRequests()
        {
            // Code that sends requests
            // to other servers.

            // Suspend work.
            bAllocate = false;

        }

        static void FinishExistingRequests()
        {
            // Code that waits a period of time
            // for pending requests to finish.

            // Clear the simulated workload.
            load->Clear();

        }

        static void AcceptRequests()
        {
            // Code that resumes processing
            // requests on this server.

            // Resume work.
            bAllocate = true;
        }
    };
}

int main()
{
    GCNotify::Program::Main();
}

public static void Main(string[] args)
{
    try
    {
        // Register for a notification.
        GC.RegisterForFullGCNotification(10, 10);
        Console.WriteLine("Registered for GC notification.");

        checkForNotify = true;
        bAllocate = true;

        // Start a thread using WaitForFullGCProc.
        Thread thWaitForFullGC = new Thread(new ThreadStart(WaitForFullGCProc));
        thWaitForFullGC.Start();

        // While the thread is checking for notifications in
        // WaitForFullGCProc, create objects to simulate a server workload.
        try
        {

            int lastCollCount = 0;
            int newCollCount = 0;

            while (true)
            {
                if (bAllocate)
                {
                    load.Add(new byte[1000]);
                    newCollCount = GC.CollectionCount(2);
                    if (newCollCount != lastCollCount)
                    {
                        // Show collection count when it increases:
                        Console.WriteLine("Gen 2 collection count: {0}", GC.CollectionCount(2).ToString());
                        lastCollCount = newCollCount;
                    }

                    // For ending the example (arbitrary).
                    if (newCollCount == 500)
                    {
                        finalExit = true;
                        checkForNotify = false;
                        break;
                    }
                }
            }
        }
        catch (OutOfMemoryException)
        {
            Console.WriteLine("Out of memory.");
        }

        finalExit = true;
        checkForNotify = false;
        GC.CancelFullGCNotification();
    }
    catch (InvalidOperationException invalidOp)
    {

        Console.WriteLine("GC Notifications are not supported while concurrent GC is enabled.\n"
            + invalidOp.Message);
    }
}

Imports System.Collections.Generic
Imports System.Threading

Class Program
    ' Variables for continual checking in the
    ' While loop in the WaitForFullGcProc method.
    Private Shared checkForNotify As Boolean = False

    ' Variable for suspending work
    ' (such as servicing allocated server requests)
    ' after a notification is received and then
    ' resuming allocation after inducing a garbage collection.
    Private Shared bAllocate As Boolean = False

    ' Variable for ending the example.
    Private Shared finalExit As Boolean = False

    ' Collection for objects that
    ' simulate the server request workload.
    Private Shared load As New List(Of Byte())


    Public Shared Sub Main(ByVal args() As String)
        Try
            ' Register for a notification.
            GC.RegisterForFullGCNotification(10, 10)
            Console.WriteLine("Registered for GC notification.")

            bAllocate = True
            checkForNotify = True

            ' Start a thread using WaitForFullGCProc.
            Dim thWaitForFullGC As Thread = _
                New Thread(New ThreadStart(AddressOf WaitForFullGCProc))
            thWaitForFullGC.Start()

            ' While the thread is checking for notifications in
            ' WaitForFullGCProc, create objects to simulate a server workload.
            Try
                Dim lastCollCount As Integer = 0
                Dim newCollCount As Integer = 0


                While (True)
                    If bAllocate = True Then

                        load.Add(New Byte(1000) {})
                        newCollCount = GC.CollectionCount(2)
                        If (newCollCount <> lastCollCount) Then
                            ' Show collection count when it increases:
                            Console.WriteLine("Gen 2 collection count: {0}", _
                                              GC.CollectionCount(2).ToString)
                            lastCollCount = newCollCount
                        End If

                        ' For ending the example (arbitrary).
                        If newCollCount = 500 Then
                            finalExit = True
                            checkForNotify = False
                            bAllocate = False
                            Exit While
                        End If

                    End If
                End While

            Catch outofMem As OutOfMemoryException
                Console.WriteLine("Out of memory.")
            End Try

            finalExit = True
            checkForNotify = False
            GC.CancelFullGCNotification()

        Catch invalidOp As InvalidOperationException
            Console.WriteLine("GC Notifications are not supported while concurrent GC is enabled." _
                              & vbLf & invalidOp.Message)
        End Try
    End Sub

    Public Shared Sub OnFullGCApproachNotify()
        Console.WriteLine("Redirecting requests.")

        ' Method that tells the request queuing
        ' server to not direct requests to this server.
        RedirectRequests()

        ' Method that provides time to
        ' finish processing pending requests.
        FinishExistingRequests()

        ' This is a good time to induce a GC collection
        ' because the runtime will induce a ful GC soon.
        ' To be very careful, you can check precede with a
        ' check of the GC.GCCollectionCount to make sure
        ' a full GC did not already occur since last notified.
        GC.Collect()
        Console.WriteLine("Induced a collection.")
    End Sub

    Public Shared Sub OnFullGCCompleteEndNotify()
        ' Method that informs the request queuing server
        ' that this server is ready to accept requests again.
        AcceptRequests()
        Console.WriteLine("Accepting requests again.")
    End Sub

    Public Shared Sub WaitForFullGCProc()

        While True
            ' CheckForNotify is set to true and false in Main.

            While checkForNotify
                ' Check for a notification of an approaching collection.
                Dim s As GCNotificationStatus = GC.WaitForFullGCApproach
                If (s = GCNotificationStatus.Succeeded) Then
                    Console.WriteLine("GC Notification raised.")
                    OnFullGCApproachNotify()
                ElseIf (s = GCNotificationStatus.Canceled) Then
                    Console.WriteLine("GC Notification cancelled.")
                    Exit While
                Else
                    ' This can occur if a timeout period
                    ' is specified for WaitForFullGCApproach(Timeout)
                    ' or WaitForFullGCComplete(Timeout)
                    ' and the time out period has elapsed.
                    Console.WriteLine("GC Notification not applicable.")
                    Exit While
                End If

                ' Check for a notification of a completed collection.
                s = GC.WaitForFullGCComplete
                If (s = GCNotificationStatus.Succeeded) Then
                    Console.WriteLine("GC Notification raised.")
                    OnFullGCCompleteEndNotify()
                ElseIf (s = GCNotificationStatus.Canceled) Then
                    Console.WriteLine("GC Notification cancelled.")
                    Exit While
                Else
                    ' Could be a time out.
                    Console.WriteLine("GC Notification not applicable.")
                    Exit While
                End If

            End While
            Thread.Sleep(500)
            ' FinalExit is set to true right before
            ' the main thread cancelled notification.
            If finalExit Then
                Exit While
            End If

        End While
    End Sub

    Private Shared Sub RedirectRequests()
        ' Code that sends requests
        ' to other servers.

        ' Suspend work.
        bAllocate = False
    End Sub

    Private Shared Sub FinishExistingRequests()
        ' Code that waits a period of time
        ' for pending requests to finish.

        ' Clear the simulated workload.
        load.Clear()

    End Sub

    Private Shared Sub AcceptRequests()
        ' Code that resumes processing
        ' requests on this server.

        ' Resume work.
        bAllocate = True
    End Sub
End Class

下面的代码包含 WaitForFullGCProc 用户方法，其中包括持续 while 循环，用于检查是否有垃圾回收通知。

public:
    static void WaitForFullGCProc()
    {
        while (true)
        {
            // CheckForNotify is set to true and false in Main.
            while (checkForNotify)
            {
                // Check for a notification of an approaching collection.
                GCNotificationStatus s = GC::WaitForFullGCApproach();
                if (s == GCNotificationStatus::Succeeded)
                {
                    Console::WriteLine("GC Notification raised.");
                    OnFullGCApproachNotify();
                }
                else if (s == GCNotificationStatus::Canceled)
                {
                    Console::WriteLine("GC Notification cancelled.");
                    break;
                }
                else
                {
                    // This can occur if a timeout period
                    // is specified for WaitForFullGCApproach(Timeout)
                    // or WaitForFullGCComplete(Timeout)
                    // and the time out period has elapsed.
                    Console::WriteLine("GC Notification not applicable.");
                    break;
                }

                // Check for a notification of a completed collection.
                s = GC::WaitForFullGCComplete();
                if (s == GCNotificationStatus::Succeeded)
                {
                    Console::WriteLine("GC Notification raised.");
                    OnFullGCCompleteEndNotify();
                }
                else if (s == GCNotificationStatus::Canceled)
                {
                    Console::WriteLine("GC Notification cancelled.");
                    break;
                }
                else
                {
                    // Could be a time out.
                    Console::WriteLine("GC Notification not applicable.");
                    break;
                }
            }


            Thread::Sleep(500);
            // FinalExit is set to true right before
            // the main thread cancelled notification.
            if (finalExit)
            {
                break;
            }
        }
    }

public static void WaitForFullGCProc()
{
    while (true)
    {
        // CheckForNotify is set to true and false in Main.
        while (checkForNotify)
        {
            // Check for a notification of an approaching collection.
            GCNotificationStatus s = GC.WaitForFullGCApproach();
            if (s == GCNotificationStatus.Succeeded)
            {
                Console.WriteLine("GC Notification raised.");
                OnFullGCApproachNotify();
            }
            else if (s == GCNotificationStatus.Canceled)
            {
                Console.WriteLine("GC Notification cancelled.");
                break;
            }
            else
            {
                // This can occur if a timeout period
                // is specified for WaitForFullGCApproach(Timeout)
                // or WaitForFullGCComplete(Timeout)
                // and the time out period has elapsed.
                Console.WriteLine("GC Notification not applicable.");
                break;
            }

            // Check for a notification of a completed collection.
            GCNotificationStatus status = GC.WaitForFullGCComplete();
            if (status == GCNotificationStatus.Succeeded)
            {
                Console.WriteLine("GC Notification raised.");
                OnFullGCCompleteEndNotify();
            }
            else if (status == GCNotificationStatus.Canceled)
            {
                Console.WriteLine("GC Notification cancelled.");
                break;
            }
            else
            {
                // Could be a time out.
                Console.WriteLine("GC Notification not applicable.");
                break;
            }
        }

        Thread.Sleep(500);
        // FinalExit is set to true right before
        // the main thread cancelled notification.
        if (finalExit)
        {
            break;
        }
    }
}

Public Shared Sub WaitForFullGCProc()

    While True
        ' CheckForNotify is set to true and false in Main.

        While checkForNotify
            ' Check for a notification of an approaching collection.
            Dim s As GCNotificationStatus = GC.WaitForFullGCApproach
            If (s = GCNotificationStatus.Succeeded) Then
                Console.WriteLine("GC Notification raised.")
                OnFullGCApproachNotify()
            ElseIf (s = GCNotificationStatus.Canceled) Then
                Console.WriteLine("GC Notification cancelled.")
                Exit While
            Else
                ' This can occur if a timeout period
                ' is specified for WaitForFullGCApproach(Timeout)
                ' or WaitForFullGCComplete(Timeout)
                ' and the time out period has elapsed.
                Console.WriteLine("GC Notification not applicable.")
                Exit While
            End If

            ' Check for a notification of a completed collection.
            s = GC.WaitForFullGCComplete
            If (s = GCNotificationStatus.Succeeded) Then
                Console.WriteLine("GC Notification raised.")
                OnFullGCCompleteEndNotify()
            ElseIf (s = GCNotificationStatus.Canceled) Then
                Console.WriteLine("GC Notification cancelled.")
                Exit While
            Else
                ' Could be a time out.
                Console.WriteLine("GC Notification not applicable.")
                Exit While
            End If

        End While
        Thread.Sleep(500)
        ' FinalExit is set to true right before
        ' the main thread cancelled notification.
        If finalExit Then
            Exit While
        End If

    End While
End Sub

下面的代码包含 OnFullGCApproachNotify 方法，调用自

WaitForFullGCProc 方法。

public:
    static void OnFullGCApproachNotify()
    {
        Console::WriteLine("Redirecting requests.");

        // Method that tells the request queuing
        // server to not direct requests to this server.
        RedirectRequests();

        // Method that provides time to
        // finish processing pending requests.
        FinishExistingRequests();

        // This is a good time to induce a GC collection
        // because the runtime will induce a full GC soon.
        // To be very careful, you can check precede with a
        // check of the GC.GCCollectionCount to make sure
        // a full GC did not already occur since last notified.
        GC::Collect();
        Console::WriteLine("Induced a collection.");

    }

public static void OnFullGCApproachNotify()
{

    Console.WriteLine("Redirecting requests.");

    // Method that tells the request queuing
    // server to not direct requests to this server.
    RedirectRequests();

    // Method that provides time to
    // finish processing pending requests.
    FinishExistingRequests();

    // This is a good time to induce a GC collection
    // because the runtime will induce a full GC soon.
    // To be very careful, you can check precede with a
    // check of the GC.GCCollectionCount to make sure
    // a full GC did not already occur since last notified.
    GC.Collect();
    Console.WriteLine("Induced a collection.");
}

Public Shared Sub OnFullGCApproachNotify()
    Console.WriteLine("Redirecting requests.")

    ' Method that tells the request queuing
    ' server to not direct requests to this server.
    RedirectRequests()

    ' Method that provides time to
    ' finish processing pending requests.
    FinishExistingRequests()

    ' This is a good time to induce a GC collection
    ' because the runtime will induce a ful GC soon.
    ' To be very careful, you can check precede with a
    ' check of the GC.GCCollectionCount to make sure
    ' a full GC did not already occur since last notified.
    GC.Collect()
    Console.WriteLine("Induced a collection.")
End Sub

下面的代码包含 OnFullGCApproachComplete 方法，调用自

WaitForFullGCProc 方法。

public:
    static void OnFullGCCompleteEndNotify()
    {
        // Method that informs the request queuing server
        // that this server is ready to accept requests again.
        AcceptRequests();
        Console::WriteLine("Accepting requests again.");
    }

public static void OnFullGCCompleteEndNotify()
{
    // Method that informs the request queuing server
    // that this server is ready to accept requests again.
    AcceptRequests();
    Console.WriteLine("Accepting requests again.");
}

Public Shared Sub OnFullGCCompleteEndNotify()
    ' Method that informs the request queuing server
    ' that this server is ready to accept requests again.
    AcceptRequests()
    Console.WriteLine("Accepting requests again.")
End Sub

下面的代码包含调用自 OnFullGCApproachNotify 和 OnFullGCCompleteNotify 方法的用户方法。用户方法重定向请求，完成现有请求，再在发生完全垃圾回收后继续执行请求。

private:
    static void RedirectRequests()
    {
        // Code that sends requests
        // to other servers.

        // Suspend work.
        bAllocate = false;

    }

    static void FinishExistingRequests()
    {
        // Code that waits a period of time
        // for pending requests to finish.

        // Clear the simulated workload.
        load->Clear();

    }

    static void AcceptRequests()
    {
        // Code that resumes processing
        // requests on this server.

        // Resume work.
        bAllocate = true;
    }

private static void RedirectRequests()
{
    // Code that sends requests
    // to other servers.

    // Suspend work.
    bAllocate = false;
}

private static void FinishExistingRequests()
{
    // Code that waits a period of time
    // for pending requests to finish.

    // Clear the simulated workload.
    load.Clear();
}

private static void AcceptRequests()
{
    // Code that resumes processing
    // requests on this server.

    // Resume work.
    bAllocate = true;
}

Private Shared Sub RedirectRequests()
    ' Code that sends requests
    ' to other servers.

    ' Suspend work.
    bAllocate = False
End Sub

Private Shared Sub FinishExistingRequests()
    ' Code that waits a period of time
    ' for pending requests to finish.

    ' Clear the simulated workload.
    load.Clear()

End Sub

Private Shared Sub AcceptRequests()
    ' Code that resumes processing
    ' requests on this server.

    ' Resume work.
    bAllocate = True
End Sub

整个代码示例如下所示：

using namespace System;
using namespace System::Collections::Generic;
using namespace System::Threading;

namespace GCNotify
{
    ref class Program
    {
    private:
        // Variable for continual checking in the
        // While loop in the WaitForFullGCProc method.
        static bool checkForNotify = false;

        // Variable for suspending work
        // (such servicing allocated server requests)
        // after a notification is received and then
        // resuming allocation after inducing a garbage collection.
        static bool bAllocate = false;

        // Variable for ending the example.
        static bool finalExit = false;

        // Collection for objects that
        // simulate the server request workload.
        static List<array<Byte>^>^ load = gcnew List<array<Byte>^>();


    public:
        static void Main()
        {
            try
            {
                // Register for a notification.
                GC::RegisterForFullGCNotification(10, 10);
                Console::WriteLine("Registered for GC notification.");

                checkForNotify = true;
                bAllocate = true;

                // Start a thread using WaitForFullGCProc.
                Thread^ thWaitForFullGC = gcnew Thread(gcnew ThreadStart(&WaitForFullGCProc));
                thWaitForFullGC->Start();

                // While the thread is checking for notifications in
                // WaitForFullGCProc, create objects to simulate a server workload.
                try
                {
                    int lastCollCount = 0;
                    int newCollCount = 0;


                    while (true)
                    {
                        if (bAllocate)
                        {
                            load->Add(gcnew array<Byte>(1000));
                            newCollCount = GC::CollectionCount(2);
                            if (newCollCount != lastCollCount)
                            {
                                // Show collection count when it increases:
                                Console::WriteLine("Gen 2 collection count: {0}", GC::CollectionCount(2).ToString());
                                lastCollCount = newCollCount;
                            }

                            // For ending the example (arbitrary).
                            if (newCollCount == 500)
                            {
                                finalExit = true;
                                checkForNotify = false;
                                break;
                            }
                        }
                    }

                }
                catch (OutOfMemoryException^)
                {
                    Console::WriteLine("Out of memory.");
                }


                finalExit = true;
                checkForNotify = false;
                GC::CancelFullGCNotification();

            }
            catch (InvalidOperationException^ invalidOp)
            {

                Console::WriteLine("GC Notifications are not supported while concurrent GC is enabled.\n"
                    + invalidOp->Message);
            }
        }

    public:
        static void OnFullGCApproachNotify()
        {
            Console::WriteLine("Redirecting requests.");

            // Method that tells the request queuing
            // server to not direct requests to this server.
            RedirectRequests();

            // Method that provides time to
            // finish processing pending requests.
            FinishExistingRequests();

            // This is a good time to induce a GC collection
            // because the runtime will induce a full GC soon.
            // To be very careful, you can check precede with a
            // check of the GC.GCCollectionCount to make sure
            // a full GC did not already occur since last notified.
            GC::Collect();
            Console::WriteLine("Induced a collection.");

        }


    public:
        static void OnFullGCCompleteEndNotify()
        {
            // Method that informs the request queuing server
            // that this server is ready to accept requests again.
            AcceptRequests();
            Console::WriteLine("Accepting requests again.");
        }

    public:
        static void WaitForFullGCProc()
        {
            while (true)
            {
                // CheckForNotify is set to true and false in Main.
                while (checkForNotify)
                {
                    // Check for a notification of an approaching collection.
                    GCNotificationStatus s = GC::WaitForFullGCApproach();
                    if (s == GCNotificationStatus::Succeeded)
                    {
                        Console::WriteLine("GC Notification raised.");
                        OnFullGCApproachNotify();
                    }
                    else if (s == GCNotificationStatus::Canceled)
                    {
                        Console::WriteLine("GC Notification cancelled.");
                        break;
                    }
                    else
                    {
                        // This can occur if a timeout period
                        // is specified for WaitForFullGCApproach(Timeout)
                        // or WaitForFullGCComplete(Timeout)
                        // and the time out period has elapsed.
                        Console::WriteLine("GC Notification not applicable.");
                        break;
                    }

                    // Check for a notification of a completed collection.
                    s = GC::WaitForFullGCComplete();
                    if (s == GCNotificationStatus::Succeeded)
                    {
                        Console::WriteLine("GC Notification raised.");
                        OnFullGCCompleteEndNotify();
                    }
                    else if (s == GCNotificationStatus::Canceled)
                    {
                        Console::WriteLine("GC Notification cancelled.");
                        break;
                    }
                    else
                    {
                        // Could be a time out.
                        Console::WriteLine("GC Notification not applicable.");
                        break;
                    }
                }


                Thread::Sleep(500);
                // FinalExit is set to true right before
                // the main thread cancelled notification.
                if (finalExit)
                {
                    break;
                }
            }
        }

    private:
        static void RedirectRequests()
        {
            // Code that sends requests
            // to other servers.

            // Suspend work.
            bAllocate = false;

        }

        static void FinishExistingRequests()
        {
            // Code that waits a period of time
            // for pending requests to finish.

            // Clear the simulated workload.
            load->Clear();

        }

        static void AcceptRequests()
        {
            // Code that resumes processing
            // requests on this server.

            // Resume work.
            bAllocate = true;
        }
    };
}

int main()
{
    GCNotify::Program::Main();
}

using System;
using System.Collections.Generic;
using System.Threading;

namespace GCNotify
{
    class Program
    {
        // Variable for continual checking in the
        // While loop in the WaitForFullGCProc method.
        static bool checkForNotify = false;

        // Variable for suspending work
        // (such servicing allocated server requests)
        // after a notification is received and then
        // resuming allocation after inducing a garbage collection.
        static bool bAllocate = false;

        // Variable for ending the example.
        static bool finalExit = false;

        // Collection for objects that
        // simulate the server request workload.
        static List<byte[]> load = new List<byte[]>();

        public static void Main(string[] args)
        {
            try
            {
                // Register for a notification.
                GC.RegisterForFullGCNotification(10, 10);
                Console.WriteLine("Registered for GC notification.");

                checkForNotify = true;
                bAllocate = true;

                // Start a thread using WaitForFullGCProc.
                Thread thWaitForFullGC = new Thread(new ThreadStart(WaitForFullGCProc));
                thWaitForFullGC.Start();

                // While the thread is checking for notifications in
                // WaitForFullGCProc, create objects to simulate a server workload.
                try
                {

                    int lastCollCount = 0;
                    int newCollCount = 0;

                    while (true)
                    {
                        if (bAllocate)
                        {
                            load.Add(new byte[1000]);
                            newCollCount = GC.CollectionCount(2);
                            if (newCollCount != lastCollCount)
                            {
                                // Show collection count when it increases:
                                Console.WriteLine("Gen 2 collection count: {0}", GC.CollectionCount(2).ToString());
                                lastCollCount = newCollCount;
                            }

                            // For ending the example (arbitrary).
                            if (newCollCount == 500)
                            {
                                finalExit = true;
                                checkForNotify = false;
                                break;
                            }
                        }
                    }
                }
                catch (OutOfMemoryException)
                {
                    Console.WriteLine("Out of memory.");
                }

                finalExit = true;
                checkForNotify = false;
                GC.CancelFullGCNotification();
            }
            catch (InvalidOperationException invalidOp)
            {

                Console.WriteLine("GC Notifications are not supported while concurrent GC is enabled.\n"
                    + invalidOp.Message);
            }
        }

        public static void OnFullGCApproachNotify()
        {

            Console.WriteLine("Redirecting requests.");

            // Method that tells the request queuing
            // server to not direct requests to this server.
            RedirectRequests();

            // Method that provides time to
            // finish processing pending requests.
            FinishExistingRequests();

            // This is a good time to induce a GC collection
            // because the runtime will induce a full GC soon.
            // To be very careful, you can check precede with a
            // check of the GC.GCCollectionCount to make sure
            // a full GC did not already occur since last notified.
            GC.Collect();
            Console.WriteLine("Induced a collection.");
        }

        public static void OnFullGCCompleteEndNotify()
        {
            // Method that informs the request queuing server
            // that this server is ready to accept requests again.
            AcceptRequests();
            Console.WriteLine("Accepting requests again.");
        }

        public static void WaitForFullGCProc()
        {
            while (true)
            {
                // CheckForNotify is set to true and false in Main.
                while (checkForNotify)
                {
                    // Check for a notification of an approaching collection.
                    GCNotificationStatus s = GC.WaitForFullGCApproach();
                    if (s == GCNotificationStatus.Succeeded)
                    {
                        Console.WriteLine("GC Notification raised.");
                        OnFullGCApproachNotify();
                    }
                    else if (s == GCNotificationStatus.Canceled)
                    {
                        Console.WriteLine("GC Notification cancelled.");
                        break;
                    }
                    else
                    {
                        // This can occur if a timeout period
                        // is specified for WaitForFullGCApproach(Timeout)
                        // or WaitForFullGCComplete(Timeout)
                        // and the time out period has elapsed.
                        Console.WriteLine("GC Notification not applicable.");
                        break;
                    }

                    // Check for a notification of a completed collection.
                    GCNotificationStatus status = GC.WaitForFullGCComplete();
                    if (status == GCNotificationStatus.Succeeded)
                    {
                        Console.WriteLine("GC Notification raised.");
                        OnFullGCCompleteEndNotify();
                    }
                    else if (status == GCNotificationStatus.Canceled)
                    {
                        Console.WriteLine("GC Notification cancelled.");
                        break;
                    }
                    else
                    {
                        // Could be a time out.
                        Console.WriteLine("GC Notification not applicable.");
                        break;
                    }
                }

                Thread.Sleep(500);
                // FinalExit is set to true right before
                // the main thread cancelled notification.
                if (finalExit)
                {
                    break;
                }
            }
        }

        private static void RedirectRequests()
        {
            // Code that sends requests
            // to other servers.

            // Suspend work.
            bAllocate = false;
        }

        private static void FinishExistingRequests()
        {
            // Code that waits a period of time
            // for pending requests to finish.

            // Clear the simulated workload.
            load.Clear();
        }

        private static void AcceptRequests()
        {
            // Code that resumes processing
            // requests on this server.

            // Resume work.
            bAllocate = true;
        }
    }
}

Imports System.Collections.Generic
Imports System.Threading

Class Program
    ' Variables for continual checking in the
    ' While loop in the WaitForFullGcProc method.
    Private Shared checkForNotify As Boolean = False

    ' Variable for suspending work
    ' (such as servicing allocated server requests)
    ' after a notification is received and then
    ' resuming allocation after inducing a garbage collection.
    Private Shared bAllocate As Boolean = False

    ' Variable for ending the example.
    Private Shared finalExit As Boolean = False

    ' Collection for objects that
    ' simulate the server request workload.
    Private Shared load As New List(Of Byte())


    Public Shared Sub Main(ByVal args() As String)
        Try
            ' Register for a notification.
            GC.RegisterForFullGCNotification(10, 10)
            Console.WriteLine("Registered for GC notification.")

            bAllocate = True
            checkForNotify = True

            ' Start a thread using WaitForFullGCProc.
            Dim thWaitForFullGC As Thread = _
                New Thread(New ThreadStart(AddressOf WaitForFullGCProc))
            thWaitForFullGC.Start()

            ' While the thread is checking for notifications in
            ' WaitForFullGCProc, create objects to simulate a server workload.
            Try
                Dim lastCollCount As Integer = 0
                Dim newCollCount As Integer = 0


                While (True)
                    If bAllocate = True Then

                        load.Add(New Byte(1000) {})
                        newCollCount = GC.CollectionCount(2)
                        If (newCollCount <> lastCollCount) Then
                            ' Show collection count when it increases:
                            Console.WriteLine("Gen 2 collection count: {0}", _
                                              GC.CollectionCount(2).ToString)
                            lastCollCount = newCollCount
                        End If

                        ' For ending the example (arbitrary).
                        If newCollCount = 500 Then
                            finalExit = True
                            checkForNotify = False
                            bAllocate = False
                            Exit While
                        End If

                    End If
                End While

            Catch outofMem As OutOfMemoryException
                Console.WriteLine("Out of memory.")
            End Try

            finalExit = True
            checkForNotify = False
            GC.CancelFullGCNotification()

        Catch invalidOp As InvalidOperationException
            Console.WriteLine("GC Notifications are not supported while concurrent GC is enabled." _
                              & vbLf & invalidOp.Message)
        End Try
    End Sub

    Public Shared Sub OnFullGCApproachNotify()
        Console.WriteLine("Redirecting requests.")

        ' Method that tells the request queuing
        ' server to not direct requests to this server.
        RedirectRequests()

        ' Method that provides time to
        ' finish processing pending requests.
        FinishExistingRequests()

        ' This is a good time to induce a GC collection
        ' because the runtime will induce a ful GC soon.
        ' To be very careful, you can check precede with a
        ' check of the GC.GCCollectionCount to make sure
        ' a full GC did not already occur since last notified.
        GC.Collect()
        Console.WriteLine("Induced a collection.")
    End Sub

    Public Shared Sub OnFullGCCompleteEndNotify()
        ' Method that informs the request queuing server
        ' that this server is ready to accept requests again.
        AcceptRequests()
        Console.WriteLine("Accepting requests again.")
    End Sub

    Public Shared Sub WaitForFullGCProc()

        While True
            ' CheckForNotify is set to true and false in Main.

            While checkForNotify
                ' Check for a notification of an approaching collection.
                Dim s As GCNotificationStatus = GC.WaitForFullGCApproach
                If (s = GCNotificationStatus.Succeeded) Then
                    Console.WriteLine("GC Notification raised.")
                    OnFullGCApproachNotify()
                ElseIf (s = GCNotificationStatus.Canceled) Then
                    Console.WriteLine("GC Notification cancelled.")
                    Exit While
                Else
                    ' This can occur if a timeout period
                    ' is specified for WaitForFullGCApproach(Timeout)
                    ' or WaitForFullGCComplete(Timeout)
                    ' and the time out period has elapsed.
                    Console.WriteLine("GC Notification not applicable.")
                    Exit While
                End If

                ' Check for a notification of a completed collection.
                s = GC.WaitForFullGCComplete
                If (s = GCNotificationStatus.Succeeded) Then
                    Console.WriteLine("GC Notification raised.")
                    OnFullGCCompleteEndNotify()
                ElseIf (s = GCNotificationStatus.Canceled) Then
                    Console.WriteLine("GC Notification cancelled.")
                    Exit While
                Else
                    ' Could be a time out.
                    Console.WriteLine("GC Notification not applicable.")
                    Exit While
                End If

            End While
            Thread.Sleep(500)
            ' FinalExit is set to true right before
            ' the main thread cancelled notification.
            If finalExit Then
                Exit While
            End If

        End While
    End Sub

    Private Shared Sub RedirectRequests()
        ' Code that sends requests
        ' to other servers.

        ' Suspend work.
        bAllocate = False
    End Sub

    Private Shared Sub FinishExistingRequests()
        ' Code that waits a period of time
        ' for pending requests to finish.

        ' Clear the simulated workload.
        load.Clear()

    End Sub

    Private Shared Sub AcceptRequests()
        ' Code that resumes processing
        ' requests on this server.

        ' Resume work.
        bAllocate = True
    End Sub
End Class

请参阅

垃圾回收

通过

垃圾回收通知

完全垃圾回收

通知阈值参数

示例

描述

请参阅

其他资源