通过

BackColor、BackStyle、BorderColor、BorderStyle、ForeColor 和 SpecialEffect 属性示例

  • 项目

以下示例演示 BorderStyle 和 SpecialEffect 属性，其中显示了通过这些属性可用的每个边框。 该示例还演示了如何使用 BackColor、 BackStyle、 BorderColor 和 ForeColor 属性控制颜色设置。

若要使用此示例，请将此示例代码复制到窗体的 Declarations 部分。 确保该窗体包含：

  • 六个名称分别为"TextBox1"到"TextBox6"的 TextBox 控件。
  • 两个名称分别为"ToggleButton1"和"ToggleButton2"的 ToggleButton 控件。
Private Sub UserForm_Initialize() 
'Initialize each TextBox with a border style or special effect, 
'and foreground and background colors 
 
'TextBox1 initially uses a borderstyle 
TextBox1.Text = "BorderStyle-Single" 
TextBox1.BorderStyle = fmBorderStyleSingle 
TextBox1.BorderColor = RGB(255, 128, 128) 
'Color - Salmon 
TextBox1.ForeColor = RGB(255, 255, 0) 
'Color - Yellow 
TextBox1.BackColor = RGB(0, 128, 64) 
'Color - Green #2 
 
'TextBoxes 2 through 6 initially use special effects 
TextBox2.Text = "Flat" 
TextBox2.SpecialEffect = fmSpecialEffectFlat 
TextBox2.ForeColor = RGB(64, 0, 0) 
'Color - Brown 
TextBox2.BackColor = RGB(0, 0, 255) 
'Color - Blue 
 
'Ensure the background style for TextBox2 is initially 
'opaque. 
TextBox2.BackStyle = fmBackStyleOpaque 
 
TextBox3.Text = "Etched" 
TextBox3.SpecialEffect = fmSpecialEffectEtched 
TextBox3.ForeColor = RGB(128, 0, 255) 
'Color - Purple 
TextBox3.BackColor = RGB(0, 255, 255) 
'Color - Cyan 
 
'Define BorderColor for later use (when borderstyle=fmBorderStyleSingle) 
TextBox3.BorderColor = RGB(0, 0, 0) 
'Color - Black 
 
TextBox4.Text = "Bump" 
TextBox4.SpecialEffect = fmSpecialEffectBump 
TextBox4.ForeColor = RGB(255, 0, 255) 
'Color - Magenta 
TextBox4.BackColor = RGB(0, 0, 100) 
'Color - Navy blue 
 
TextBox5.Text = "Raised" 
TextBox5.SpecialEffect = fmSpecialEffectRaised 
TextBox5.ForeColor = RGB(255, 0, 0) 
'Color - Red 
TextBox5.BackColor = RGB(128, 128, 128) 
'Color - Gray 
 
TextBox6.Text = "Sunken" 
TextBox6.SpecialEffect = fmSpecialEffectSunken 
TextBox6.ForeColor = RGB(0, 64, 0) 
'Color - Olive 
TextBox6.BackColor = RGB(0, 255, 0) 
'Color - Green #1 
 
ToggleButton1.Caption = "Swap styles" 
ToggleButton2.Caption = "Transparent/Opaque " _ 
 & "background" 
End Sub 
 
Private Sub ToggleButton1_Click() 
 
'Swap borders between TextBox1 and TextBox3 
If ToggleButton1.Value = True Then 
 'Change TextBox1 from BorderStyle to Etched 
 TextBox1.Text = "Etched" 
 TextBox1.SpecialEffect = fmSpecialEffectEtched 
 
 'Change TextBox3 from Etched to BorderStyle 
 TextBox3.Text = "BorderStyle-Single" 
 TextBox3.BorderStyle = fmBorderStyleSingle 
Else 
 'Change TextBox1 back to BorderStyle 
 TextBox1.Text = "BorderStyle-Single" 
 TextBox1.BorderStyle = fmBorderStyleSingle 
 
 'Change TextBox3 back to Etched 
 TextBox3.Text = "Etched" 
 TextBox3.SpecialEffect = fmSpecialEffectEtched 
End If 
End Sub

Private Sub ToggleButton2_Click() 
'Set background to Opaque or Transparent 
If ToggleButton2.Value = True Then 
 'Change TextBox2 to a transparent background 
 TextBox2.BackStyle = fmBackStyleTransparent 
Else 
 'Change TextBox2 back to opaque background 
 TextBox2.BackStyle = fmBackStyleOpaque 
End If 
End Sub

支持和反馈

有关于 Office VBA 或本文档的疑问或反馈？ 请参阅 Office VBA 支持和反馈，获取有关如何接收支持和提供反馈的指南。