Set-CMTaskSequenceGroup

参考

模块:: ConfigurationManager

设置 Configuration Manager 任务序列组。

语法

Set-CMTaskSequenceGroup
   [-AddStep <IResultObject[]>]
   [-CleanStep]
   [-InsertStepStartIndex <Int32>]
   [-AddCondition <IResultObject[]>]
   [-ClearCondition]
   [-Description <String>]
   -InputObject <IResultObject>
   [-IsContinueOnError <Boolean>]
   [-IsEnabled <Boolean>]
   [-MoveToIndex <Int32>]
   [-NewStepName <String>]
   [-RemoveConditionFile]
   [-RemoveConditionFolder]
   [-RemoveConditionIfStatement]
   [-RemoveConditionOperatingSystem]
   [-RemoveConditionQueryWmi]
   [-RemoveConditionRegistry]
   [-RemoveConditionSoftware]
   [-RemoveConditionVariable]
   [-StepName <String>]
   [-StepOrder <ReorderType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTaskSequenceGroup
   [-AddStep <IResultObject[]>]
   [-CleanStep]
   [-InsertStepStartIndex <Int32>]
   [-AddCondition <IResultObject[]>]
   [-ClearCondition]
   [-Description <String>]
   [-IsContinueOnError <Boolean>]
   [-IsEnabled <Boolean>]
   [-MoveToIndex <Int32>]
   [-NewStepName <String>]
   [-RemoveConditionFile]
   [-RemoveConditionFolder]
   [-RemoveConditionIfStatement]
   [-RemoveConditionOperatingSystem]
   [-RemoveConditionQueryWmi]
   [-RemoveConditionRegistry]
   [-RemoveConditionSoftware]
   [-RemoveConditionVariable]
   [-StepName <String>]
   [-StepOrder <ReorderType>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTaskSequenceGroup
   [-AddStep <IResultObject[]>]
   [-CleanStep]
   [-InsertStepStartIndex <Int32>]
   [-AddCondition <IResultObject[]>]
   [-ClearCondition]
   [-Description <String>]
   [-IsContinueOnError <Boolean>]
   [-IsEnabled <Boolean>]
   [-MoveToIndex <Int32>]
   [-NewStepName <String>]
   [-RemoveConditionFile]
   [-RemoveConditionFolder]
   [-RemoveConditionIfStatement]
   [-RemoveConditionOperatingSystem]
   [-RemoveConditionQueryWmi]
   [-RemoveConditionRegistry]
   [-RemoveConditionSoftware]
   [-RemoveConditionVariable]
   [-StepName <String>]
   [-StepOrder <ReorderType>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTaskSequenceGroup
   [-Condition <IResultObject[]>]
   [-SetConditionIfStatement]
   [-StatementType <ConditionStatementType>]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTaskSequenceGroup
   [-Condition <IResultObject[]>]
   [-SetConditionIfStatement]
   [-StatementType <ConditionStatementType>]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTaskSequenceGroup
   [-Condition <IResultObject[]>]
   -InputObject <IResultObject>
   [-SetConditionIfStatement]
   [-StatementType <ConditionStatementType>]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTaskSequenceGroup
   [-ConditionVariableName <String>]
   [-ConditionVariableValue <String>]
   [-OperatorType <VariableOperatorType>]
   [-SetConditionVariable]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTaskSequenceGroup
   [-ConditionVariableName <String>]
   [-ConditionVariableValue <String>]
   [-OperatorType <VariableOperatorType>]
   [-SetConditionVariable]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTaskSequenceGroup
   [-ConditionVariableName <String>]
   [-ConditionVariableValue <String>]
   -InputObject <IResultObject>
   [-OperatorType <VariableOperatorType>]
   [-SetConditionVariable]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTaskSequenceGroup
   [-FileDateTimeOperator <VariableOperatorType>]
   [-FilePath <String>]
   [-FileTimestamp <DateTime>]
   [-FileVersion <String>]
   [-SetConditionFile]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-VersionOperator <VariableOperatorType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTaskSequenceGroup
   [-FileDateTimeOperator <VariableOperatorType>]
   [-FilePath <String>]
   [-FileTimestamp <DateTime>]
   [-FileVersion <String>]
   [-SetConditionFile]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-VersionOperator <VariableOperatorType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTaskSequenceGroup
   [-FileDateTimeOperator <VariableOperatorType>]
   [-FilePath <String>]
   [-FileTimestamp <DateTime>]
   [-FileVersion <String>]
   -InputObject <IResultObject>
   [-SetConditionFile]
   [-StepName <String>]
   [-VersionOperator <VariableOperatorType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTaskSequenceGroup
   [-FolderDateTimeOperator <VariableOperatorType>]
   [-FolderPath <String>]
   [-FolderTimestamp <DateTime>]
   [-SetConditionFolder]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTaskSequenceGroup
   [-FolderDateTimeOperator <VariableOperatorType>]
   [-FolderPath <String>]
   [-FolderTimestamp <DateTime>]
   [-SetConditionFolder]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTaskSequenceGroup
   [-FolderDateTimeOperator <VariableOperatorType>]
   [-FolderPath <String>]
   [-FolderTimestamp <DateTime>]
   -InputObject <IResultObject>
   [-SetConditionFolder]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTaskSequenceGroup
   -InputObject <IResultObject>
   [-Namespace <String[]>]
   [-Query <String>]
   [-SetConditionQueryWmi]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTaskSequenceGroup
   -InputObject <IResultObject>
   [-SetConditionOperatingSystem]
   [-StepName <String>]
   [-SupportedPlatform <IResultObject[]>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTaskSequenceGroup
   -InputObject <IResultObject>
   [-RegistryKey <String>]
   [-RegistryOperator <VariableOperatorType>]
   [-RegistryValueData <String>]
   [-RegistryValueName <String>]
   [-RootKey <RegistryRootKeyType>]
   [-SetConditionRegistry]
   [-StepName <String>]
   [-ValueType <RegistryValueType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTaskSequenceGroup
   -InputObject <IResultObject>
   [-IsAnyVersion <Boolean>]
   [-MsiFilePath <String>]
   [-SetConditionSoftware]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTaskSequenceGroup
   [-IsAnyVersion <Boolean>]
   [-MsiFilePath <String>]
   [-SetConditionSoftware]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTaskSequenceGroup
   [-IsAnyVersion <Boolean>]
   [-MsiFilePath <String>]
   [-SetConditionSoftware]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTaskSequenceGroup
   [-Namespace <String[]>]
   [-Query <String>]
   [-SetConditionQueryWmi]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTaskSequenceGroup
   [-Namespace <String[]>]
   [-Query <String>]
   [-SetConditionQueryWmi]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTaskSequenceGroup
   [-RegistryKey <String>]
   [-RegistryOperator <VariableOperatorType>]
   [-RegistryValueData <String>]
   [-RegistryValueName <String>]
   [-RootKey <RegistryRootKeyType>]
   [-SetConditionRegistry]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-ValueType <RegistryValueType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTaskSequenceGroup
   [-RegistryKey <String>]
   [-RegistryOperator <VariableOperatorType>]
   [-RegistryValueData <String>]
   [-RegistryValueName <String>]
   [-RootKey <RegistryRootKeyType>]
   [-SetConditionRegistry]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-ValueType <RegistryValueType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTaskSequenceGroup
   [-SetConditionOperatingSystem]
   [-StepName <String>]
   [-SupportedPlatform <IResultObject[]>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTaskSequenceGroup
   [-SetConditionOperatingSystem]
   [-StepName <String>]
   [-SupportedPlatform <IResultObject[]>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

说明

Set-CMTaskSequenceGroup cmdlet 设置任务序列组的属性、选项、特定条件和步骤， (任务序列中的) 。 cmdlet 支持来自任务序列对象的管道，并且可以按组名称进行筛选。

注意

从 Configuration Manager 站点驱动器运行 Configuration Manager cmdlet，例如 PS XYZ:\>。有关详细信息，请参阅入门。

示例

示例 1

PS XYZ:\>$ReferencedTaskSequence | Set-CMTaskSequenceGroup -StepName $gpName -NewStepName $gpName2 -Description $gpNewDescription -IsContinueOnError $false -IsEnabled $false -ClearStep -AddStep $st1 -ClearCondition -AddCondition $cd1

示例 2

$ReferencedTaskSequence | Set-CMTaskSequenceGroup -StepName $gpName2 -SetConditionIfStatement -StatementType None -Condition $cd1

示例 3

$ReferencedTaskSequence | Set-CMTaskSequenceGroup -StepName $gpName2 -AddStep $st1 -InsertStepStartIndex $index

示例 4

$ReferencedTaskSequence | Set-CMTaskSequenceGroup -StepName $gpName2 -StepOrder MoveToIndex -MoveToIndex $index

参数

-AddCondition

指定要添加的条件对象。

类型:	IResultObject[]
别名:	AddConditions
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-AddStep

指定要添加的步骤。

类型:	IResultObject[]
别名:	AddSteps
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-CleanStep

按值/ID/名称逐步清理。

类型:	SwitchParameter
别名:	ClearSteps, ClearStep, CleanSteps
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-ClearCondition

按值/ID/名称清除条件。

类型:	SwitchParameter
别名:	ClearConditions
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-Condition

指定条件。

类型:	IResultObject[]
别名:	SubCondition, SubConditions
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-ConditionVariableName

指定条件变量名称。

类型:	String
别名:	Variable
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-ConditionVariableValue

指定条件变量值。

类型:	String
别名:	Value
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-Confirm

提示你在运行 cmdlet 之前进行确认。

类型:	SwitchParameter
别名:	cf
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-Description

指定说明。

类型:	String
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-DisableWildcardHandling

此参数将通配符视为文本字符值。不能将其与 ForceWildcardHandling 组合使用。

类型:	SwitchParameter
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-FileDateTimeOperator

指定文件日期时间运算符。

类型:	VariableOperatorType
接受的值:	Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-FilePath

指定文件路径。

类型:	String
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-FileTimestamp

指定文件时间戳。

类型:	DateTime
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-FileVersion

指定文件版本。

类型:	String
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-FolderDateTimeOperator

指定文件夹日期时间运算符。

类型:	VariableOperatorType
接受的值:	Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-FolderPath

指定文件夹路径。

类型:	String
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-FolderTimestamp

指定文件夹时间戳。

类型:	DateTime
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-ForceWildcardHandling

此参数处理通配符，并可能导致意外行为， (不建议) 。不能将其与 DisableWildcardHandling 组合使用。

类型:	SwitchParameter
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-InputObject

指定任务序列对象。

类型:	IResultObject
别名:	TaskSequence
Position:	Named
默认值:	None
必需:	True
接受管道输入:	True
接受通配符:	False

-InsertStepStartIndex

指定插入步骤开始索引。

类型:	Int32
别名:	InsertStepsStartIndex
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-IsAnyVersion

类型:	Boolean
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-IsContinueOnError

指示发生错误时是否继续。

类型:	Boolean
别名:	IsThisStepContinueOnError
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-IsEnabled

指示是否启用步骤。

类型:	Boolean
别名:	IsThisStepEnabled
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-MoveToIndex

指定要移动到的索引。

类型:	Int32
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-MsiFilePath

指定 MSI 文件路径。

类型:	String
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-Namespace

指定命名空间。

类型:	String[]
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-NewStepName

指定新的步骤名称。

类型:	String
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-OperatorType

指定操作类型。

类型:	VariableOperatorType
接受的值:	Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual, Like, NotLike
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-Query

指定查询。

类型:	String
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-RegistryKey

指定注册表项。

类型:	String
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-RegistryOperator

指定注册表运算符。

类型:	VariableOperatorType
接受的值:	Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-RegistryValueData

指定注册表值数据。

类型:	String
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-RegistryValueName

指定注册表值名称。

类型:	String
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-RemoveConditionFile

按值/ID/名称删除条件文件。

类型:	SwitchParameter
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-RemoveConditionFolder

按 value/ID/name 删除条件文件夹。

类型:	SwitchParameter
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-RemoveConditionIfStatement

按 value/ID/name 删除条件 IF 语句。

类型:	SwitchParameter
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-RemoveConditionOperatingSystem

按 value/ID/name 删除条件操作系统。

类型:	SwitchParameter
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-RemoveConditionQueryWmi

按值/ID/name 删除条件查询 WMI。

类型:	SwitchParameter
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-RemoveConditionRegistry

按值/ID/name 删除条件注册表。

类型:	SwitchParameter
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-RemoveConditionSoftware

按 value/ID/name 删除条件软件。

类型:	SwitchParameter
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-RemoveConditionVariable

按值/ID/name 删除条件变量。

类型:	SwitchParameter
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-RootKey

指定根密钥。

类型:	RegistryRootKeyType
接受的值:	HKeyCurrentUser, HKeyLocalMachine, HKeyUsers, HKeyCurrentConfig
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-SetConditionFile

类型:	SwitchParameter
Position:	Named
默认值:	None
必需:	True
接受管道输入:	False
接受通配符:	False

-SetConditionFolder

类型:	SwitchParameter
Position:	Named
默认值:	None
必需:	True
接受管道输入:	False
接受通配符:	False

-SetConditionIfStatement

类型:	SwitchParameter
Position:	Named
默认值:	None
必需:	True
接受管道输入:	False
接受通配符:	False

-SetConditionOperatingSystem

类型:	SwitchParameter
Position:	Named
默认值:	None
必需:	True
接受管道输入:	False
接受通配符:	False

-SetConditionQueryWmi

类型:	SwitchParameter
Position:	Named
默认值:	None
必需:	True
接受管道输入:	False
接受通配符:	False

-SetConditionRegistry

类型:	SwitchParameter
Position:	Named
默认值:	None
必需:	True
接受管道输入:	False
接受通配符:	False

-SetConditionSoftware

类型:	SwitchParameter
Position:	Named
默认值:	None
必需:	True
接受管道输入:	False
接受通配符:	False

-SetConditionVariable

类型:	SwitchParameter
Position:	Named
默认值:	None
必需:	True
接受管道输入:	False
接受通配符:	False

-StatementType

类型:	ConditionStatementType
别名:	Operator
接受的值:	All, Any, None
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-StepName

指定步骤名称。

类型:	String
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-StepOrder

指定步骤顺序。

类型:	ReorderType
接受的值:	MoveUp, MoveDown, MoveToIndex
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-SupportedPlatform

指定支持的平台。

类型:	IResultObject[]
别名:	SupportedPlatforms
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-TaskSequenceId

指定任务序列 ID。

类型:	String
别名:	Id, TaskSequencePackageId
Position:	Named
默认值:	None
必需:	True
接受管道输入:	False
接受通配符:	False

-TaskSequenceName

指定任务序列名称。

类型:	String
Position:	Named
默认值:	None
必需:	True
接受管道输入:	False
接受通配符:	False

-ValueType

指定值类型。

类型:	RegistryValueType
接受的值:	RegistrySZ, RegistryExpandSZ, RegistryDWord
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-VersionOperator

指定版本运算符。

类型:	VariableOperatorType
接受的值:	Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

-WhatIf

显示在 cmdlet 运行时发生的情况。此 cmdlet 未运行。

类型:	SwitchParameter
别名:	wi
Position:	Named
默认值:	None
必需:	False
接受管道输入:	False
接受通配符:	False

输入

Microsoft.ConfigurationManagement.ManagementProvider.IResultObject

输出

System.Object

通过