New-ThrottlingPolicy
此 cmdlet 仅适用于本地 Exchange。
使用 New-ThrottlingPolicy cmdlet 创建非默认用户限制策略。
有关以下语法部分的参数设置的详细信息，请参阅 Exchange cmdlet 语法。
语法
New-ThrottlingPolicy
[-Name] <String>
[-AnonymousCutoffBalance <Unlimited>]
[-AnonymousMaxBurst <Unlimited>]
[-AnonymousMaxConcurrency <UInt32>]
[-AnonymousPercentTimeInAD <UInt32>]
[-AnonymousPercentTimeInCAS <UInt32>]
[-AnonymousPercentTimeInMailboxRPC <UInt32>]
[-AnonymousRechargeRate <Unlimited>]
[-BookingSelfServiceCutoffBalance <Unlimited>]
[-BookingSelfServiceMaxBurst <Unlimited>]
[-BookingSelfServiceMaxConcurrency <Unlimited>]
[-BookingSelfServiceRechargeRate <Unlimited>]
[-ComplianceMaxExpansionDGRecipients <Unlimited>]
[-ComplianceMaxExpansionNestedDGs <Unlimited>]
[-Confirm]
[-ConsensusCutoffBalance <Unlimited>]
[-ConsensusMaxBurst <Unlimited>]
[-ConsensusMaxConcurrency <Unlimited>]
[-ConsensusRechargeRate <Unlimited>]
[-CpaCutoffBalance <Unlimited>]
[-CpaMaxBurst <Unlimited>]
[-CPAMaxConcurrency <UInt32>]
[-CPAPercentTimeInCAS <UInt32>]
[-CPAPercentTimeInMailboxRPC <UInt32>]
[-CpaRechargeRate <Unlimited>]
[-CPUStartPercent <UInt32>]
[-DiscoveryMaxConcurrency <Unlimited>]
[-DiscoveryMaxKeywords <Unlimited>]
[-DiscoveryMaxKeywordsPerPage <Unlimited>]
[-DiscoveryMaxMailboxes <Unlimited>]
[-DiscoveryMaxPreviewSearchMailboxes <Unlimited>]
[-DiscoveryMaxRefinerResults <Unlimited>]
[-DiscoveryMaxSearchQueueDepth <Unlimited>]
[-DiscoveryMaxStatsSearchMailboxes <Unlimited>]
[-DiscoveryPreviewSearchResultsPageSize <Unlimited>]
[-DiscoverySearchTimeoutPeriod <Unlimited>]
[-DomainController <Fqdn>]
[-EasCutoffBalance <Unlimited>]
[-EasMaxBurst <Unlimited>]
[-EASMaxConcurrency <UInt32>]
[-EASMaxDeviceDeletesPerMonth <UInt32>]
[-EASMaxDevices <UInt32>]
[-EasMaxInactivityForDeviceCleanup <Unlimited>]
[-EASPercentTimeInAD <UInt32>]
[-EASPercentTimeInCAS <UInt32>]
[-EASPercentTimeInMailboxRPC <UInt32>]
[-EasRechargeRate <Unlimited>]
[-EncryptionRecipientCutoffBalance <Unlimited>]
[-EncryptionRecipientMaxBurst <Unlimited>]
[-EncryptionRecipientMaxConcurrency <Unlimited>]
[-EncryptionRecipientRechargeRate <Unlimited>]
[-EncryptionSenderCutoffBalance <Unlimited>]
[-EncryptionSenderMaxBurst <Unlimited>]
[-EncryptionSenderMaxConcurrency <Unlimited>]
[-EncryptionSenderRechargeRate <Unlimited>]
[-EwsCostThreshold <Unlimited>]
[-EwsCutoffBalance <Unlimited>]
[-EWSFastSearchTimeoutInSeconds <UInt32>]
[-EWSFindCountLimit <UInt32>]
[-EwsMaxBurst <Unlimited>]
[-EWSMaxConcurrency <UInt32>]
[-EWSMaxSubscriptions <UInt32>]
[-EWSPercentTimeInAD <UInt32>]
[-EWSPercentTimeInCAS <UInt32>]
[-EWSPercentTimeInMailboxRPC <UInt32>]
[-EwsRechargeRate <Unlimited>]
[-ExchangeMaxCmdlets <UInt32>]
[-ForwardeeLimit <UInt32>]
[-ImapCutoffBalance <Unlimited>]
[-ImapMaxBurst <Unlimited>]
[-IMAPMaxConcurrency <UInt32>]
[-IMAPPercentTimeInAD <UInt32>]
[-IMAPPercentTimeInCAS <UInt32>]
[-IMAPPercentTimeInMailboxRPC <UInt32>]
[-ImapRechargeRate <Unlimited>]
[-IsServiceAccount]
[-MessageRateLimit <UInt32>]
[-OutlookServiceCutoffBalance <Unlimited>]
[-OutlookServiceMaxBurst <Unlimited>]
[-OutlookServiceMaxConcurrency <Unlimited>]
[-OutlookServiceMaxSocketConnectionsPerDevice <Unlimited>]
[-OutlookServiceMaxSocketConnectionsPerUser <Unlimited>]
[-OutlookServiceMaxSubscriptions <Unlimited>]
[-OutlookServiceRechargeRate <Unlimited>]
[-OwaCutoffBalance <Unlimited>]
[-OwaMaxBurst <Unlimited>]
[-OWAMaxConcurrency <UInt32>]
[-OWAPercentTimeInAD <UInt32>]
[-OWAPercentTimeInCAS <UInt32>]
[-OWAPercentTimeInMailboxRPC <UInt32>]
[-OwaRechargeRate <Unlimited>]
[-OwaVoiceCutoffBalance <Unlimited>]
[-OwaVoiceMaxBurst <Unlimited>]
[-OwaVoiceMaxConcurrency <Unlimited>]
[-OwaVoiceRechargeRate <Unlimited>]
[-PopCutoffBalance <Unlimited>]
[-PopMaxBurst <Unlimited>]
[-POPMaxConcurrency <UInt32>]
[-POPPercentTimeInAD <UInt32>]
[-POPPercentTimeInCAS <UInt32>]
[-POPPercentTimeInMailboxRPC <UInt32>]
[-PopRechargeRate <Unlimited>]
[-PowerShellCutoffBalance <Unlimited>]
[-PowerShellMaxBurst <Unlimited>]
[-PowerShellMaxCmdletQueueDepth <UInt32>]
[-PowerShellMaxCmdlets <UInt32>]
[-PowerShellMaxCmdletsTimePeriod <UInt32>]
[-PowerShellMaxConcurrency <UInt32>]
[-PowerShellMaxDestructiveCmdlets <UInt32>]
[-PowerShellMaxDestructiveCmdletsTimePeriod <UInt32>]
[-PowerShellMaxOperations <Unlimited>]
[-PowerShellMaxRunspaces <Unlimited>]
[-PowerShellMaxRunspacesTimePeriod <Unlimited>]
[-PowerShellMaxTenantConcurrency <Unlimited>]
[-PowerShellMaxTenantRunspaces <Unlimited>]
[-PowerShellRechargeRate <Unlimited>]
[-PswsMaxConcurrency <Unlimited>]
[-PswsMaxRequest <Unlimited>]
[-PswsMaxRequestTimePeriod <Unlimited>]
[-PushNotificationCutoffBalance <Unlimited>]
[-PushNotificationMaxBurst <Unlimited>]
[-PushNotificationMaxBurstPerDevice <Unlimited>]
[-PushNotificationMaxConcurrency <Unlimited>]
[-PushNotificationRechargeRate <Unlimited>]
[-PushNotificationRechargeRatePerDevice <Unlimited>]
[-PushNotificationSamplingPeriodPerDevice <Unlimited>]
[-RcaCutoffBalance <Unlimited>]
[-RcaMaxBurst <Unlimited>]
[-RCAMaxConcurrency <UInt32>]
[-RCAPercentTimeInAD <UInt32>]
[-RCAPercentTimeInCAS <UInt32>]
[-RCAPercentTimeInMailboxRPC <UInt32>]
[-RcaRechargeRate <Unlimited>]
[-RcaSharedCutoffBalance <Unlimited>]
[-RcaSharedMaxBurst <Unlimited>]
[-RcaSharedMaxConcurrency <Unlimited>]
[-RcaSharedRechargeRate <Unlimited>]
[-RecipientRateLimit <UInt32>]
[-SchedulesCutoffBalance <Unlimited>]
[-SchedulesMaxBurst <Unlimited>]
[-SchedulesMaxConcurrency <Unlimited>]
[-SchedulesRechargeRate <Unlimited>]
[-SuiteCutoffBalance <Unlimited>]
[-SuiteMaxBurst <Unlimited>]
[-SuiteMaxConcurrency <Unlimited>]
[-SuiteRechargeRate <Unlimited>]
[-ThrottlingPolicyScope <ThrottlingPolicyScopeType>]
[-WhatIf]
[<CommonParameters>] 说明
默认情况下，有一个名为 的默认限制策略 GlobalThrottlingPolicy_<GUID> ，其限制范围为“全局”。 Microsoft Exchange 安装程序创建默认客户端限制策略作为客户端访问服务器角色的一部分。 不应替换、重新创建或删除现有默认限制策略。 但是，可以使用“组织”或“常规”范围创建其他限制策略来更改用户限制设置。 还可以使用 Set-ThrottlingPolicy cmdlet 编辑已创建的“组织”和“常规”范围的策略。
有关如何控制单个用户使用资源的方式的详细信息，请参阅 Exchange Server 中的用户工作负载管理。
您必须先获得权限，然后才能运行此 cmdlet。 虽然本主题中列出了此 cmdlet 的所有参数，但如果这些参数并未包含在分配给您的权限中，那么您将无法使用这些参数。 若要查找在贵组织中运行任何 cmdlet 或参数所需的权限，请参阅 Find the permissions required to run any Exchange cmdlet。
示例
示例 1
New-ThrottlingPolicy -Name <NewPolicyName> -EWSPercentTimeInCAS 80 -EWSPercentTimeInAD $null在 Exchange Server 2010 中，此示例创建一个非默认限制策略。 省略的任何参数都继承默认限制策略中的值。
示例 2
New-ThrottlingPolicy -Name ITUserPolicy -EwsMaxConcurrency 4 -ThrottlingPolicyScope Regular此示例创建可与特定用户关联的非默认用户限制策略。 省略的任何参数都继承默认限制策略 GlobalThrottlingPolicy_<GUID>中的值。 创建此策略后，必须将其与特定用户关联。
示例 3
New-ThrottlingPolicy -Name <NewPolicyName> -EWSPercentTimeInCAS 80在 Exchange Server 2010 中，此示例为租户创建一个策略，该策略将 EWSPercentTimeInCAS 参数值设置为 80。
示例 4
New-ThrottlingPolicy -Name AllUsersEWSPolicy -EwsMaxConcurrency 4 -ThrottlingPolicyScope Organization此示例创建一个策略，该策略适用于组织中的所有用户。 省略的任何参数都继承默认限制策略 GlobalThrottlingPolicy_<GUID>中的值。
示例 5
New-ThrottlingPolicy -Name RemoteSiteUserPolicy -PowerShellMaxConcurrency 3 -PowerShellMaxCmdletQueueDepth 12此示例创建限制策略 RemoteSiteUserPolicy，将用户的连接数限制为 3。 与此策略关联的用户只能创建三个远程 Exchange 命令行管理程序会话。 此策略还限制为三个 Exchange 管理中心， (EAC) 操作或 Exchange Web Services (EWS) 可以同时执行的操作。
示例 6
New-ThrottlingPolicy -Name ITStaffUserPolicyCmdletMax -PowerShellMaxCmdlets 10 -PowerShellMaxCmdletsTimePeriod 5此示例创建一个限制策略，该策略将用户限制为在 5 秒内只能执行 10 个 cmdlet。 如果与此策略相关联的用户执行的 cmdlet 超过此数目，cmdlet 管道执行将停止，并出现限制错误消息。 用户需要等待，然后重新提交对打开的连接执行 cmdlet。
示例 7
New-ThrottlingPolicy -Name ITStaffUserPolicyDestructiveCmdlets -PowerShellMaxDestructiveCmdlets 10 -PowerShellMaxDestructiveCmdletsTimePeriod 60此示例创建一个限制策略，将用户限制为在 60 秒内只能执行 10 个破坏性 cmdlet。 如果与此策略相关联的用户执行的 cmdlet 超过此数目，cmdlet 管道执行将停止，并出现限制错误消息。 用户需要等待，然后重新提交对打开的连接执行 cmdlet。
参数
-AnonymousCutoffBalance
AnonymousCutoffBalance 参数指定在完全阻止用户在特定组件上执行操作止之前匿名用户的资源消耗量限值。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-AnonymousMaxBurst
AnonymousMaxBurst 参数指定匿名用户在被限制之前能消耗资源升级量的时间量。 此值以毫秒为单位计量。 每个组件的此值会分别设置。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-AnonymousMaxConcurrency
AnonymousMaxConcurrency 参数指定可同时与用户的日历数据建立的匿名连接数。 连接将在收到请求时建立，一直持续到将响应完整地发送给请求者。 如果匿名用户尝试提出的并发请求超过其策略允许的范围，则新的连接尝试将失败。 但是，现有的连接仍然有效。 AnonymousMaxConcurrency 参数的有效范围介于 0 到 2147483647（包含两者）之间。 默认值为 1。 要表示不应限制并发连接数（无限），应将此值设置为 $null。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-AnonymousPercentTimeInAD
此参数仅在 2010 Exchange Server可用。
AnonymousPercentTimeInAD 参数指定匿名用户可以花费一分钟的百分比来执行 LDAP 请求， (PercentTimeInAD) 用户的日历数据。 值为 100 表示每一分钟时段，用户可以花费 60 秒的时间消耗相关的资源。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-AnonymousPercentTimeInCAS
此参数仅在 2010 Exchange Server可用。
AnonymousPercentTimeInCAS 参数指定匿名用户可将执行 CAS 代码 (PercentTimeInCAS) 到用户的日历数据的分钟百分比。 值为 100 表示每一分钟时段，用户可以花费 60 秒的时间消耗相关的资源。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-AnonymousPercentTimeInMailboxRPC
此参数仅在 2010 Exchange Server可用。
AnonymousPercentTimeInMailboxRPC 参数指定匿名用户可以 (PercentTimeInMailboxRPC) 用户日历数据执行邮箱 RPC 请求的分钟百分比。 值为 100 表示每一分钟时段，用户可以花费 60 秒的时间消耗相关的资源。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-AnonymousRechargeRate
AnonymousRechargeRate 参数指定在预算时间中，匿名用户的预算在速率（预算增长速率）为多少时会进行收费。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-BookingSelfServiceCutoffBalance
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019 |
-BookingSelfServiceMaxBurst
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019 |
-BookingSelfServiceMaxConcurrency
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019 |
-BookingSelfServiceRechargeRate
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019 |
-ComplianceMaxExpansionDGRecipients
ComplianceMaxExpansionDGRecipients 参数指定当发现搜索在搜索指定收件人时，能够在通讯组中扩展的最大收件人数。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-ComplianceMaxExpansionNestedDGs
ComplianceMaxExpansionNestedDGs 参数指定当发现搜索在搜索指定收件人时，能够扩展的最大嵌套通讯组数。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-Confirm
Confirm 开关指定是否显示确认提示。 此开关对 cmdlet 造成的影响取决于在你继续操作之前 cmdlet 是否需要确认。
- 破坏性 cmdlet (例如，Remove-* cmdlet) 具有内置的暂停，该暂停会强制你在继续操作之前确认命令。 对于这些 cmdlet，您可以使用此确切语法跳过确认提示：
-Confirm:$false。 - 大多数其他 cmdlet (例如，New-* 和 Set-* cmdlet) 没有内置暂停。 对于这些 cmdlet，指定不含值的 Confirm 开关会引入暂停，从而强制要求你先确认命令，然后再继续操作。
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-ConsensusCutoffBalance
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019 |
-ConsensusMaxBurst
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019 |
-ConsensusMaxConcurrency
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019 |
-ConsensusRechargeRate
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019 |
-CpaCutoffBalance
CpaCutoffBalance 参数指定当用户在特定组件上的执行操作完全被阻止之前跨内部部署用户的资源消耗量限值。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-CpaMaxBurst
CpaMaxBurst 参数指定跨内部部署用户在被限制之前能消耗资源升级量的时间量。 此值以毫秒为单位计量。 每个组件的此值会分别设置。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-CPAMaxConcurrency
CpaMaxConcurrency 参数指定跨界用户一次可以与 Exchange 服务器建立的并发连接数。 连接将在收到请求时建立，一直持续到将响应完整地发送给请求者。 如果用户尝试提出的并发请求超过其策略允许的范围，则新的连接尝试将失败。 但是，现有的连接仍然有效。 CpaMaxConcurrency 参数的有效范围介于 0 到 2147483647（包含两者）之间。 要表示不应限制并发连接数（无限），应将此值设置为 $null。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-CPAPercentTimeInCAS
CPAPercentTimeInCAS 参数指定跨界用户执行 CAS 代码 (percentTimeInCAS) 的分钟百分比。 值为 100 表示每一分钟时段，用户可以花费 60 秒的时间消耗相关的资源。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-CPAPercentTimeInMailboxRPC
此参数仅在 2010 Exchange Server可用。
CPAPercentTimeInMailboxRPC 参数指定跨界用户 (PercentTimeInMailboxRPC) 可以花费执行邮箱 RPC 请求的分钟百分比。 值为 100 表示每一分钟时段，用户可以花费 60 秒的时间消耗相关的资源。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-CpaRechargeRate
CpaRechargeRate 参数指定在预算期间按) 增长 (跨界用户预算的费率。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-CPUStartPercent
此参数仅在 2010 Exchange Server可用。
CPUStartPercent 参数指定受此策略管理的用户开始退让的每进程 CPU 百分比。 有效值为 0 到 100。 使用 $null 关闭此策略的基于 CPU 百分比的限制。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-DiscoveryMaxConcurrency
DiscoveryMaxConcurrency 参数指定用户可以同时执行的并发发现搜索执行数。 若要修改发现限制参数，请创建新策略并将其命名为“DiscoveryThrottlingPolicy”。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-DiscoveryMaxKeywords
DiscoveryMaxKeywords 参数指定用户可在发现搜索中包括的最大关键字数量。 有关详细信息，请参阅Search-Mailbox。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-DiscoveryMaxKeywordsPerPage
DiscoveryMaxKeywordsPerPage 参数指定要在 EAC 中单个页面上显示其统计信息的关键字数。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-DiscoveryMaxMailboxes
DiscoveryMaxMailboxes 参数指定用户可在发现搜索中包括的最大源邮箱数量。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-DiscoveryMaxPreviewSearchMailboxes
DiscoveryMaxPreviewSearchMailboxes 参数指定用户可在电子数据展示搜索预览中包括的最大邮箱数量。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-DiscoveryMaxRefinerResults
该参数不使用，同时将被删除。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-DiscoveryMaxSearchQueueDepth
DiscoveryMaxSearchQueueDepth 参数指定可同时启用的最大并发发现搜索线程数。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-DiscoveryMaxStatsSearchMailboxes
DiscoveryMaxStatsSearchMailboxes 参数指定用户可以在In-Place电子数据展示搜索中搜索的最大邮箱数，而无需查看统计信息。 超过使用 DiscoveryMaxStatsSearchMailboxes 参数配置的邮箱数时，用户必须将搜索结果复制到发现邮箱，才能查看发现搜索的统计信息。 有关详细信息，请参阅 Exchange Server 中的就地电子数据展示。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-DiscoveryPreviewSearchResultsPageSize
DiscoveryPreviewSearchResultsPageSize 参数指定在 eDiscovery 搜索预览的单个页面上显示的消息数量。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-DiscoverySearchTimeoutPeriod
DiscoverySearchTimeoutPeriod 参数指定发现搜索在超时前运行的分钟数。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-DomainController
DomainController 参数指定此 cmdlet 从 Active Directory 读取数据或向其写入数据时使用的域控制器。 可以使用完全限定的域名 (FQDN) 来标识域控制器。 例如，dc01.contoso.com。
边缘传输服务器上不支持 DomainController 参数。 边缘传输服务器使用活动目录轻型目录服务 (AD LDS) 的本地实例来读取和写入数据。
| Type: | Fqdn |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-EasCutoffBalance
EasCutoffBalance 参数指定Exchange ActiveSync用户在完全阻止对特定组件执行操作之前的资源消耗限制。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-EasMaxBurst
EasMaxBurst 参数指定Exchange ActiveSync用户在限制之前可以使用提升的资源量的时间。 此值以毫秒为单位计量。 每个组件的此值会分别设置。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-EASMaxConcurrency
EasMaxConcurrency 参数指定Exchange ActiveSync用户可以同时与 Exchange 服务器建立的并发连接数。 连接将在收到请求时建立，一直持续到将响应完整地发送给请求者。 如果用户尝试提出的并发请求超过其策略允许的范围，则新的连接尝试将失败。 但是，现有的连接仍然有效。 EasMaxConcurrency 参数的有效范围介于 0 到 2147483647（包含两者）之间。 默认值为 10。 要表示不应限制并发连接数（无限），应将此值设置为 $null。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-EASMaxDeviceDeletesPerMonth
EasMaxDeviceDeletesPerMonth 参数指定用户每月可删除的Exchange ActiveSync合作关系数的限制。 默认情况下，每个用户每个日历月最多可以删除 20 个伙伴关系。 达到该限制后，伙伴关系删除尝试将失败，并且会向用户显示错误消息。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-EASMaxDevices
EasMaxDevices 参数指定用户一次可以拥有的Exchange ActiveSync合作关系数的限制。 默认情况下，每个用户都可以与其 Exchange 帐户创建 100 个Exchange ActiveSync合作关系。 用户超过此限制后，必须删除其中一个现有的伙伴关系，然后才能创建任何新的伙伴关系。 当超过限制时，将向用户发送一封描述该限制的电子邮件错误消息。 此外，当用户超过限制时，还会在应用程序日志中记录该事件。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-EasMaxInactivityForDeviceCleanup
EasMaxInactivityForDeviceCleanup 参数指定用户设备的伙伴关系保持有效的时长。 默认情况下，对用户设备的伙伴关系有效的天数没有限制。 如果想尽可能减少组织中无效设备伙伴关系的数量，则使用该值。 若要使用该设置，请指定从用户最近一次同步时间以来的天数值，以删除设备伙伴关系。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-EASPercentTimeInAD
此参数仅在 2010 Exchange Server可用。
EASPercentTimeInAD 参数指定Exchange ActiveSync用户可以 (PercentTimeInAD) 执行 LDAP 请求的分钟百分比。 值为 100 表示每一分钟时段，用户可以花费 60 秒的时间消耗相关的资源。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-EASPercentTimeInCAS
此参数仅在 2010 Exchange Server可用。
EASPercentTimeInCAS 参数指定Exchange ActiveSync用户可以) 执行 CAS 代码 (分钟百分比。 值为 100 表示每一分钟时段，用户可以花费 60 秒的时间消耗相关的资源。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-EASPercentTimeInMailboxRPC
此参数仅在 2010 Exchange Server可用。
EASPercentTimeInMailboxRPC 参数指定Exchange ActiveSync用户可以 (PercentTimeInMailboxRPC) 执行邮箱 RPC 请求的分钟百分比。 值为 100 表示每一分钟时段，用户可以花费 60 秒的时间消耗相关的资源。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-EasRechargeRate
EasRechargeRate 参数指定 (预算在预算期间按) 增长Exchange ActiveSync用户预算的费率。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-EncryptionRecipientCutoffBalance
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-EncryptionRecipientMaxBurst
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-EncryptionRecipientMaxConcurrency
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-EncryptionRecipientRechargeRate
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-EncryptionSenderCutoffBalance
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-EncryptionSenderMaxBurst
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-EncryptionSenderMaxConcurrency
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-EncryptionSenderRechargeRate
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-EwsCostThreshold
EwsCostThreshold 参数指定 Exchange Web 服务用户的成本阈值。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019 |
-EwsCutoffBalance
EwsCutoffBalance 参数指定在完全阻止 Exchange Web Services 用户对特定组件执行操作之前的资源消耗限制。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-EWSFastSearchTimeoutInSeconds
此参数仅在 2010 Exchange Server可用。
EWSFastSearchTimeoutInSeconds 参数指定使用 Exchange Web 服务进行的搜索在超时之前继续进行的时间。如果搜索所花费的时间超过策略值所指示的时间，则搜索将停止并返回错误。 此设置的默认值为 60 秒。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-EWSFindCountLimit
此参数仅在 2010 Exchange Server可用。
EWSFindCountLimit 参数指定此当前进程中此用户可同时存在于客户端访问服务器上的内存中的 FindItem 或 FindFolder 调用的最大结果大小。 如果尝试查找超出策略限制允许的项目或文件夹数，则会返回错误。 但是，如果在索引页视图的上下文中进行调用，则不会严格强制实施该限制。 具体而言，在这种情况下，搜索结果将被截断，以包括符合策略限制的项目数和文件夹数。 然后，可以通过进一步的 FindItem 或 FindFolder 调用继续分页到结果集。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-EwsMaxBurst
EwsMaxBurst 参数指定 Exchange Web Services 用户在被限制之前可以使用提升的资源量的时间量。 此值以毫秒为单位计量。 每个组件的此值会分别设置。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-EWSMaxConcurrency
EwsMaxConcurrency 参数指定 Exchange Web 服务用户可以同时与 Exchange 服务器建立的并发连接数。 连接将在收到请求时建立，一直持续到将响应完整地发送给请求者。 如果用户尝试提出的并发请求超过其策略允许的范围，则新的连接尝试将失败。 但是，现有的连接仍然有效。 EwsMaxConcurrency 参数的有效范围介于 0 到 2147483647（包含两者）之间。 默认值为 10。 要表示不应限制并发连接数（无限），应将此值设置为 $null。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-EWSMaxSubscriptions
EwsMaxSubscriptions 参数指定 Exchange Web 服务用户可以同时在指定的 Exchange 服务器上拥有的活动推送和拉取订阅的最大数目。 如果用户尝试创建的订阅超出了配置的最大数，则订阅将失败，并会在事件查看器中记录事件。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-EWSPercentTimeInAD
此参数仅在 2010 Exchange Server可用。
EWSPercentTimeInAD 参数指定 Exchange Web Services 用户可以 (PercentTimeInAD) 执行 LDAP 请求的分钟百分比。 值为 100 表示每一分钟时段，用户可以花费 60 秒的时间消耗相关的资源。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-EWSPercentTimeInCAS
此参数仅在 2010 Exchange Server可用。
EWSPercentTimeInCAS 参数指定 Exchange Web Services 用户可以花费执行 CAS 代码 (percentTimeInCAS) 的分钟百分比。 值为 100 表示每一分钟时段，用户可以花费 60 秒的时间消耗相关的资源。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-EWSPercentTimeInMailboxRPC
此参数仅在 2010 Exchange Server可用。
EWSPercentTimeInMailboxRPC 参数指定 Exchange Web Services 用户可以花费一分钟的百分比来执行邮箱 RPC 请求 (PercentTimeInMailboxRPC) 。 值为 100 表示每一分钟时段，用户可以花费 60 秒的时间消耗相关的资源。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-EwsRechargeRate
EwsRechargeRate 参数指定在预算期间按) 增长 (Exchange Web 服务用户预算的费率。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-ExchangeMaxCmdlets
ExchangeMaxCmdlets 参数指定执行速度减慢之前可在特定时间段内执行的 cmdlet 数。 此参数指定的值应该少于 PowerShellMaxCmdlets 参数指定的值。
用于此限制的时间段由 PowerShellMaxCmdletsTimePeriod 参数指定。 我们建议同时设置这两个参数的值。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-ForwardeeLimit
ForwardeeLimit 参数指定使用转发或重定向操作时可以在“收件箱规则”中配置的收件人数限制。 此参数不限制可转发或重定向到配置的收件人的邮件数量。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-ImapCutoffBalance
ImapCutoffBalance 参数指定在完全阻止用户在特定组件上执行操作止之前 IMAP 用户的资源消耗量限值。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-ImapMaxBurst
ImapMaxBurst 参数指定 IMAP 用户在被限制之前能消耗资源升级量的时间量。 此值以毫秒为单位计量。 每个组件的此值会分别设置。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-IMAPMaxConcurrency
ImapMaxConcurrency 参数指定 IMAP 用户一次可以与 Exchange 服务器建立的并发连接数。 连接将在收到请求时建立，一直持续到将响应完整地发送给请求者。 如果用户尝试提出的并发请求超过其策略允许的范围，则新的连接尝试将失败。 但是，现有的连接仍然有效。 ImapMaxConcurrency 参数的有效范围介于 0 到 2147483647（包含两者）之间。 要表示不应限制并发连接数（无限），应将此值设置为 $null。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-IMAPPercentTimeInAD
此参数仅在 2010 Exchange Server可用。
IMAPPercentTimeInAD 参数指定 IMAP 用户可以 (PercentTimeInAD) 执行 LDAP 请求的分钟百分比。 值为 100 表示每一分钟时段，用户可以花费 60 秒的时间消耗相关的资源。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-IMAPPercentTimeInCAS
此参数仅在 2010 Exchange Server可用。
IMAPPercentTimeInCAS 参数指定 IMAP 用户可以 (PercentTimeInCAS) 执行 CAS 代码的分钟百分比。 值为 100 表示每一分钟时段，用户可以花费 60 秒的时间消耗相关的资源。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-IMAPPercentTimeInMailboxRPC
此参数仅在 2010 Exchange Server可用。
IMAPPercentTimeInMailboxRPC 参数指定 IMAP 用户可以花费一分钟的百分比来执行邮箱 RPC 请求 (PercentTimeInMailboxRPC) 。 值为 100 表示每一分钟时段，用户可以花费 60 秒的时间消耗相关的资源。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-ImapRechargeRate
ImapRechargeRate 参数指定在预算时间中，IMAP 用户的预算在速率（预算增长速率）为多少时会进行收费。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-IsServiceAccount
IsServiceAccount 开关指定与此策略关联的用户帐户按每个用户阈值进行审核，系统资源的运行状况 (例如，总体 CPU 使用率) 。 不必为此开关指定值。
如果打算将此策略与需要更高限制限制 (（例如执行 IMAP 邮箱迁移的服务帐户或夜间Windows PowerShell任务) ）相关联，则可能需要使用此开关。
使用此开关，这些帐户完成的工作由你使用用户限制策略配置的更高用户限制设置进行审核，但如果资源开始运行不正常，则速度会变慢。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-MessageRateLimit
MessageRateLimit 参数指定每分钟可以提交以便由使用 SMTP 的 POP3 或 IMAP4 客户端进行传输的邮件数量。 如果客户端提交邮件的速度超过该参数值，则收到暂时性错误。 Exchange 稍后会尝试连接和发送邮件。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-Name
Name 参数指定 Active Directory 中对象的名称。 默认策略名为 DefaultThrottlingPolicy<GUID>。
| Type: | String |
| Position: | 1 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-OutlookServiceCutoffBalance
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-OutlookServiceMaxBurst
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-OutlookServiceMaxConcurrency
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-OutlookServiceMaxSocketConnectionsPerDevice
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-OutlookServiceMaxSocketConnectionsPerUser
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-OutlookServiceMaxSubscriptions
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-OutlookServiceRechargeRate
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-OwaCutoffBalance
OwaCutoffBalance 参数指定Outlook 网页版用户在完全阻止对特定组件执行操作之前的资源消耗限制。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-OwaMaxBurst
OwaMaxBurst 参数指定Outlook 网页版用户在被限制之前可以使用提升的资源量的时间量。 此值以毫秒为单位计量。 每个组件的此值会分别设置。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-OWAMaxConcurrency
OwaMaxConcurrency 参数指定Outlook 网页版用户可以同时与 Exchange 服务器建立的并发连接数。 连接将在收到请求时建立，一直持续到将响应完整地发送给请求者。 如果用户尝试提出的并发请求超过其策略允许的范围，则新的连接尝试将失败。 但是，现有的连接仍然有效。
此参数的有效值是介于 0 到 2147483647（含）的整数。 默认值为 5。 若要指示并发连接数应不受限制 (无限制) ，请使用 值 $null。
注意：不建议将此参数设置为较大的数字或$null值，因为服务器性能可能会受到负面影响。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-OWAPercentTimeInAD
此参数仅在 2010 Exchange Server可用。
OWAPercentTimeInAD 参数指定Outlook Web App用户可以 (PercentTimeInAD) 执行 LDAP 请求的分钟百分比。 值为 100 表示每一分钟时段，用户可以花费 60 秒的时间消耗相关的资源。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-OWAPercentTimeInCAS
此参数仅在 2010 Exchange Server可用。
OWAPercentTimeInCAS 参数指定Outlook Web App用户可以 (PercentTimeInCAS) 执行 CAS 代码的分钟百分比。 值为 100 表示每一分钟时段，用户可以花费 60 秒的时间消耗相关的资源。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-OWAPercentTimeInMailboxRPC
此参数仅在 2010 Exchange Server可用。
OWAPercentTimeInMailboxRPC 参数指定Outlook Web App用户可以 (PercentTimeInMailboxRPC) 执行邮箱 RPC 请求的分钟百分比。 值为 100 表示每一分钟时段，用户可以花费 60 秒的时间消耗相关的资源。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-OwaRechargeRate
OwaRechargeRate 参数指定 (预算在预算期间按) 增长Outlook 网页版用户预算的费率。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-OwaVoiceCutoffBalance
OwaVoiceCutoffBalance 参数指定Outlook 网页版语音用户在完全阻止对特定组件执行操作之前的资源消耗限制。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-OwaVoiceMaxBurst
OwaVoiceMaxBurst 参数指定Outlook 网页版语音用户在被限制之前可以使用提升的资源量的时间量。 此值以毫秒为单位计量。 每个组件的此值会分别设置。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-OwaVoiceMaxConcurrency
OwaVoiceMaxConcurrency 参数指定Outlook 网页版语音用户可以同时与 Exchange 服务器建立的并发连接数。 连接将在收到请求时建立，一直持续到将响应完整地发送给请求者。 如果用户尝试提出的并发请求超过其策略允许的范围，则新的连接尝试将失败。 但是，现有的连接仍然有效。 OwaVoiceMaxConcurrency 参数的有效范围介于 0 到 2147483647（包含两者）之间。 默认值为 5。 要表示不应限制并发连接数（无限），应将此值设置为 $null。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-OwaVoiceRechargeRate
OwaVoiceRechargeRate 参数指定Outlook 网页版语音用户的预算在预算期间按) 增长 (费率。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-PopCutoffBalance
PopCutoffBalance 参数指定在完全阻止用户在特定组件上执行操作止之前用户的资源消耗量限值。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-PopMaxBurst
PopMaxBurst 参数指定用户在被限制之前能消耗资源升级量的时间量。 此值以毫秒为单位计量。 每个组件的此值会分别设置。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-POPMaxConcurrency
PopMaxConcurrency 参数指定 POP 用户一次可以与 Exchange 服务器建立多少个并发连接。 连接将在收到请求时建立，一直持续到将响应完整地发送给请求者。 如果用户尝试提出的并发请求超过其策略允许的范围，则新的连接尝试将失败。 但是，现有的连接仍然有效。 PopMaxConcurrency 参数的有效范围介于 0 到 2147483647（包含两者）之间。 默认值为 20。 要表示不应限制并发连接数（无限），应将此值设置为 $null。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-POPPercentTimeInAD
此参数仅在 2010 Exchange Server可用。
POPPercentTimeInAD 参数指定 POP 用户可以花费一分钟的百分比执行 LDAP 请求 (PercentTimeInAD) 。 值为 100 表示每一分钟时段，用户可以花费 60 秒的时间消耗相关的资源。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-POPPercentTimeInCAS
此参数仅在 2010 Exchange Server可用。
POPPercentTimeInCAS 参数指定 POP 用户执行 CAS 代码 (PercentTimeInCAS) 花费的分钟百分比。 值为 100 表示每一分钟时段，用户可以花费 60 秒的时间消耗相关的资源。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-POPPercentTimeInMailboxRPC
此参数仅在 2010 Exchange Server可用。
POPPercentTimeInMailboxRPC 参数指定 POP 用户可以花费一分钟的百分比来执行邮箱 RPC 请求 (PercentTimeInMailboxRPC) 。 值为 100 表示每一分钟时段，用户可以花费 60 秒的时间消耗相关的资源。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-PopRechargeRate
PopRechargeRate 参数指定在预算时间中，用户的预算在速率（预算增长速率）为多少时会进行收费。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-PowerShellCutoffBalance
PowerShellCutoffBalance 参数指定在完全阻止用户在特定组件上执行操作止之前用户的资源消耗量限值。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-PowerShellMaxBurst
PowerShellMaxBurst 参数指定用户在被限制之前能消耗资源升级量的时间量。 此值以毫秒为单位计量。 每个组件的此值会分别设置。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-PowerShellMaxCmdletQueueDepth
PowerShellMaxCmdletQueueDepth 参数指定允许用户执行的操作数目。 该值直接影响 PowerShellMaxCmdlets 和 PowerShellMaxConcurrency 参数的行为。 例如，PowerShellMaxConcurrency 参数至少使用由 PowerShellMaxCmdletQueueDepth 参数定义的两个操作，但每个 cmdlet 执行也会使用其他操作。 操作数取决于执行的 cmdlet。 建议 PowerShellMaxCmdletQueueDepth 参数的值至少是 PowerShellMaxConcurrency 参数值的四倍。 此参数不会影响 Exchange 管理中心操作或 Exchange Web Services 操作。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-PowerShellMaxCmdlets
PowerShellMaxCmdlets 参数指定执行停止前可在特定时间段内执行的 cmdlet 数。 此参数指定的值应该大于 ExchangeMaxCmdlets 参数指定的值。 用于此限制的时间段由 PowerShellMaxCmdletsTimePeriod 参数指定。 应同时设置这两个值。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-PowerShellMaxCmdletsTimePeriod
PowerShellMaxCmdletsTimePeriod 参数指定时间段（以秒为单位），限制策略使用该时间段来确定执行的 cmdlet 数是否超过 PowerShellMaxCmdlets 和 ExchangeMaxCmdlets 参数指定的限制。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-PowerShellMaxConcurrency
PowerShellMaxConcurrency 参数根据上下文指定不同的信息：
- 在远程 PowerShell 的上下文中，PowerShellMaxConcurrency 参数指定远程 PowerShell 用户可以同时打开的最大远程 PowerShell 会话数。
- 在 Exchange Web 服务的上下文中，PowerShellMaxConcurrency 参数指定用户可以同时执行的并发 cmdlet 执行数。
此参数值不一定与用户打开的浏览器数相关。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-PowerShellMaxDestructiveCmdlets
PowerShellMaxDestructiveCmdlets 参数指定执行停止前可在特定时间段内执行的破坏性 cmdlet 数。 破坏性 cmdlet 是可对 Exchange 组织中的用户数据和配置设置进行重大更改的 cmdlet。 限制这些 cmdlet 可有助于防止意外丢失数据。 以下 cmdlet 被指具有破坏性：
- Disable-Mailbox
- Move-ActiveMailboxDatabase
- Remove-AcceptedDomain
- Remove-Mailbox
- Remove-MailUser
- Remove-Organization
- Set-Mailbox
- Set-MailUser
- Update-MailboxDatabaseCopy
用于此限制的时间段由 PowerShellMaxDestructiveCmdletsTimePeriod 参数指定。 应同时设置这两个值。 此功能默认不启用。 有关详细信息，请参阅“示例”部分。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-PowerShellMaxDestructiveCmdletsTimePeriod
PowerShellMaxDestructiveCmdletsTimePeriod 参数指定时间段（以秒为单位），限制策略使用该时间段来确定可以运行的破坏性 cmdlet 的数量。 设置 PowerShellMaxDestructiveCmdlets 参数时，为此参数设置值。 应同时设置这两个值。 有关详细信息，请参阅 PowerShellMaxDestructiveCmdlets 参数的说明。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-PowerShellMaxOperations
PowerShellMaxOperations 参数指定用于发送和接收数据的协议级操作。 如果执行 cmdlet 导致了大量的操作（例如，发生大量输入/输出的情况），则可能会发生限制。 默认设置为“Unlimited”。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-PowerShellMaxRunspaces
PowerShellMaxRunspaces 参数指定允许用户拥有的并发Windows PowerShell会话数。 默认设置为“Unlimited”。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-PowerShellMaxRunspacesTimePeriod
PowerShellMaxRunspacesTimePeriod 参数指定限制策略用于确定可以运行多少个Windows PowerShell会话的时间段（以秒为单位）。 此值在设置 PowerShellMaxRunspaces 参数时设置。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-PowerShellMaxTenantConcurrency
PowerShellMaxTenantConcurrency 参数限制每个租户组织的并发Windows PowerShell连接数。 默认情况下，每个租户组织的并发Windows PowerShell连接数限制设置为 9。 如果租户组织中的用户尝试提出的并发请求超过 PowerShellMaxTenantConcurrency 参数设置的限制，则新的连接尝试将失败。 但是，现有的连接仍然有效。 即使单个用户未超过 PowerShellMaxConcurrency 参数设置的每个用户限制，仍强制执行此限制。 PowerShellMaxTenantConcurrency 参数的有效范围介于 0 到 100（包含两者）之间。 要表示并发连接数不应该受限制，此值应该设置为 $null。
只能为默认限制策略设置此属性。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-PowerShellMaxTenantRunspaces
PowerShellMaxTenantRunspaces 参数指定允许租户具有的并发Windows PowerShell会话数。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-PowerShellRechargeRate
PowerShellRechargeRate 参数指定在预算时间中，用户的预算在速率（预算增长速率）为多少时会进行收费。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-PswsMaxConcurrency
PswsMaxConcurrency 参数指定Windows PowerShell Web 服务用户可以同时与 Exchange 服务器建立的并发连接数。 连接将在收到请求时建立，一直持续到将响应完整地发送给请求者。 如果用户尝试提出的并发请求超过其策略允许的范围，则新的连接尝试将失败。 但是，现有的连接仍然有效。
PswsMaxConcurrency 参数的默认值为 18。 要表示不应限制并发连接数（无限），应将此值设置为 $null。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-PswsMaxRequest
PswsMaxRequest 参数指定Windows PowerShell Web 服务用户可以同时对 Exchange 服务器发出的请求数。 默认设置为“Unlimited”。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-PswsMaxRequestTimePeriod
PswsMaxRequestTimePeriod 参数指定时间段（以秒为单位），限制策略使用该时间段来确定可以运行的请求数量。 默认设置为“Unlimited”。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-PushNotificationCutoffBalance
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-PushNotificationMaxBurst
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-PushNotificationMaxBurstPerDevice
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-PushNotificationMaxConcurrency
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-PushNotificationRechargeRate
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-PushNotificationRechargeRatePerDevice
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-PushNotificationSamplingPeriodPerDevice
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-RcaCutoffBalance
RcaCutoffBalance 参数指定在完全阻止用户在特定组件上执行操作止之前用户的资源消耗量限值。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-RcaMaxBurst
RcaMaxBurst 参数指定用户在被限制之前能消耗资源升级量的时间量。 此值以毫秒为单位计量。 每个组件的此值会分别设置。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-RCAMaxConcurrency
RcaMaxConcurrency 参数指定 RPC 客户端访问用户一次可以与 Exchange 服务器建立的并发连接数。 连接从接收到请求时开始建立，一直持续到关闭连接或因其他原因断开连接（例如，当用户脱机时）。 如果用户尝试提出的并发请求超过其策略允许的范围，则新的连接尝试将失败。 但是，现有的连接仍然有效。
有效值为 0 到 4294967295 之间的整数或是值 unlimited。 默认值为 40。
要表示并发连接数不应受限制（无限制），将值设置为 unlimited。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-RCAPercentTimeInAD
此参数仅在 2010 Exchange Server可用。
RCAPercentTimeInAD 参数指定 Outlook 用户可以花费一分钟执行目录请求的百分比。 值为 100 表示每一分钟时段，用户可以花费 60 秒的时间消耗相关的资源。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-RCAPercentTimeInCAS
此参数仅在 2010 Exchange Server可用。
RCAPercentTimeInCAS 参数指定 Outlook 用户可以花费一分钟的百分比来执行 CAS 邮箱请求。 值为 100 表示每一分钟时段，用户可以花费 60 秒的时间消耗相关的资源。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-RCAPercentTimeInMailboxRPC
此参数仅在 2010 Exchange Server可用。
RCAPercentTimeInMailboxRPC 参数指定 RPC 客户端访问用户可以 (PercentTimeInMailboxRPC) 执行邮箱 RPC 请求的分钟百分比。 值为 100 表示每一分钟时段，用户可以花费 60 秒的时间消耗相关的资源。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-RcaRechargeRate
RcaRechargeRate 参数指定向用户收取预算费用的费率， (预算在预算期间按) 增长多少。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-RcaSharedCutoffBalance
RcaSharedCutoffBalance 参数指定所有用户在完全阻止对特定组件执行操作之前的资源消耗限制。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019 |
-RcaSharedMaxBurst
RcaShardMaxBurst 参数指定所有用户在被限制之前可以使用提升的资源量的时间量。 此值以毫秒为单位计量。 每个组件的此值会分别设置。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019 |
-RcaSharedMaxConcurrency
RcaSharedMaxConcurrency 参数指定所有 RPC 客户端访问用户一次可以与 Exchange 服务器建立多少个并发连接。 连接从收到请求的那一刻起一直保持，直到连接关闭或连接断开， (例如，如果用户) 脱机。 如果并发请求数超过策略允许的次数，则新的连接尝试会失败。 但是，现有的连接仍然有效。
默认值为无限制，这意味着限制由 RcaMaxConcurrency 参数单独控制每个用户。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019 |
-RcaSharedRechargeRate
RcaSharedRechargeRate 参数指定向所有用户收取预算费用的费率， (预算在预算期间按) 增长多少。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019 |
-RecipientRateLimit
RecipientRateLimit 参数指定用户在 24 小时内可以发送到的收件人数量限制。
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-SchedulesCutoffBalance
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019 |
-SchedulesMaxBurst
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019 |
-SchedulesMaxConcurrency
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019 |
-SchedulesRechargeRate
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019 |
-SuiteCutoffBalance
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019 |
-SuiteMaxBurst
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019 |
-SuiteMaxConcurrency
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019 |
-SuiteRechargeRate
保留此参数以供 Microsoft 内部使用。
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019 |
-ThrottlingPolicyScope
ThrottlingPolicyScope 参数指定限制策略的作用域。 可以使用以下值。
- 常规：指定应用于特定用户的自定义策略。
- 组织：指定应用于组织中所有用户的自定义策略。
- 全局：保留用于默认限制策略。
有关限制策略范围的详细信息，请参阅 Exchange Server 中的用户工作负载管理。
| Type: | ThrottlingPolicyScopeType |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-WhatIf
WhatIf 开关模拟命令操作。 可以使用此开关在不实际应用将会发生的更改的情况下预览这些更改。 不必为此开关指定值。
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
输入
Input types
若要了解此 cmdlet 接受的输入类型，请参阅 cmdlet 的输入和输出类型。 如果 cmdlet 的"输入类型"字段为空，则表明此 cmdlet 不接受输入数据。
输出
Output types
若要了解此 cmdlet 接受的返回类型（亦称为"输出类型"），请参阅 cmdlet 的输入和输出类型。 如果"输出类型"字段为空，则表明此 cmdlet 不返回任何数据。