BitLocker Tpm And Recovery Password tests for AOAC devices with Legacy PCRs

This automated test contains TPM and recovery tests for devices that support InstantGo without Secure Boot

Test details

Associated requirements

System.Fundamentals.TPM.CS.ConnectedStandby

See the system hardware requirements.

Platforms

Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86

Expected run time

~15 minutes

Categories

Certification Functional

Type

Automated

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: WDTF System Fundamentals Testing Prerequisites.

Secure boot should be enabled.

Troubleshooting

For troubleshooting information, see Troubleshooting System Fundamentals Testing.

This test returns Pass or Fail.

If this test fails, review the test log from Windows Hardware Certification Kit (Windows HCK) Studio.

  1. Make sure you can see fveapi.dll in %systemroot%\system32\.

  2. Check test output directly from command prompt when the test runs or open te.wtl in the HCK Manager.

  3. If a test script fails, check the BitLocker status:

    • Manage-bde –status [volume]
  4. Collect BitLocker event logs from event viewer at two locations:

    • Filter \Windows logs\System logs by event sources started with BitLocker

    • Applications and Services Logs\Microsoft\Windows\BitLocker-API\Management

  5. Run **tpm.msc ** to ensure that the TPM Status is ON and that ownership has been taken.

  6. Check TCG logs

    • Collect TCG log (*.txt).

    • Compare multiple copies of the TCG log and see whether PCR [0, 2, 4, 11] are consistent across reboot and hibernate.

Note  

If the BitLocker WHCK test results in a recovery event, the BitLocker recovery key is 48-zeros (0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000).

 

 

 

Send comments about this topic to Microsoft