Reset-NetAdapterAdvancedProperty
Reset-NetAdapterAdvancedProperty
Resets the advanced properties of a network adapter to their factory default values.
Syntax
Parameter Set: ByName
Reset-NetAdapterAdvancedProperty [[-Name] <String[]> ] -DisplayName <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-NoRestart] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: ByInstanceID
Reset-NetAdapterAdvancedProperty -DisplayName <String[]> -InterfaceDescription <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-NoRestart] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: InputObject (cdxml)
Reset-NetAdapterAdvancedProperty -InputObject <CimInstance[]> [-AsJob] [-CimSession <CimSession[]> ] [-NoRestart] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Detailed Description
The Reset-NetAdapterAdvancedProperty cmdlet resets the advanced properties or a specific advanced property of a network adapter to one or more of the factory default values. The advanced property must have the DisplayName parameter value specified.
Parameters
-AsJob
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-CimSession<CimSession[]>
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-DisplayName<String[]>
Specifies the display name of the advanced property which is shown in the Advanced tab for the Network Adapter properties page in Windows Server® 2012 and Windows® 8 and later.
Aliases |
none |
Required? |
true |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
true (ByPropertyName) |
Accept Wildcard Characters? |
true |
-IncludeHidden
Specifies both visible and hidden network adapters should be included. By default only visible network adapters are included. If a wildcard character is used in identifying a network adapter and this parameter has been specified, then the wildcard string is matched against both hidden and visible network adapters.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-InputObject<CimInstance[]>
Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.
Aliases |
none |
Required? |
true |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
true (ByValue) |
Accept Wildcard Characters? |
false |
-InterfaceDescription<String[]>
Specifies the network adapter interface description. For a physical network adapter this is typically the name of the vendor of the network adapter followed by a part number and description, such as Contoso 12345 Gigabit Network Device
.
Aliases |
ifDesc |
Required? |
true |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
true |
-Name<String[]>
Specifies the name of the network adapter.
Aliases |
ifAlias, InterfaceAlias |
Required? |
false |
Position? |
1 |
Default Value |
none |
Accept Pipeline Input? |
true (ByPropertyName) |
Accept Wildcard Characters? |
true |
-NoRestart
Specifies that the network adapter is not restarted as part of running this cmdlet. Note: Many advanced properties require restarting the network adapter before the new settings take effect.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-ThrottleLimit<Int32>
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-Confirm
Prompts you for confirmation before running the cmdlet.
Required? |
false |
Position? |
named |
Default Value |
false |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? |
false |
Position? |
named |
Default Value |
false |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
<CommonParameters>
This cmdlet supports the common parameters: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, and -OutVariable. For more information, see about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).
Inputs
The input type is the type of the objects that you can pipe to the cmdlet.
Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapterAdvancedPropertySettingData[]
The
Microsoft.Management.Infrastructure.CimInstance
object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#
) provides the namespace and class name for the underlying WMI object.
Outputs
The output type is the type of the objects that the cmdlet emits.
Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapterAdvancedPropertySettingData
The
Microsoft.Management.Infrastructure.CimInstance
object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#
) provides the namespace and class name for the underlying WMI object.
Examples
EXAMPLE 1
This example resets the advanced property interrupt moderation to the default value.
PS C:\> Reset-NetAdapterAdvancedProperty -Name MyAdapter -DisplayName "Interrupt Moderation"
This is a version of the cmdlet that resets the advanced property interrupt moderation to the default value, using wildcard characters in the property name.
PS C:\> Reset-NetAdapterAdvancedProperty -Name MyAdapter -DisplayName "Interru*"
This is a version of the cmdlet that resets all advanced properties with display names to the default values.
PS C:\> Reset-NetAdapterAdvancedProperty -Name MyAdapter –DisplayName *
EXAMPLE 2
This example displays all of the default values of the advanced properties and then sets all advanced properties with display names to the default values.
PS C:\> Get-NetAdapterAdvancedProperty –Name MyAdapter | Format-List -Property Name, DisplayName, RegistryKeyword, Valid*;
PS C:\> Reset-NetAdapterAdvancedProperty -Name MyAdapter –DisplayName *
Related topics
Get-NetAdapterAdvancedProperty
New-NetAdapterAdvancedProperty
Remove-NetAdapterAdvancedProperty