Set-NetAdapterChecksumOffload
Set-NetAdapterChecksumOffload
Sets the various checksum offload settings.
Syntax
Parameter Set: ByName
Set-NetAdapterChecksumOffload [-Name] <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-IpIPv4Enabled <Direction> ] [-NoRestart] [-PassThru] [-TcpIPv4Enabled <Direction> ] [-TcpIPv6Enabled <Direction> ] [-ThrottleLimit <Int32> ] [-UdpIPv4Enabled <Direction> ] [-UdpIPv6Enabled <Direction> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: ByInstanceID
Set-NetAdapterChecksumOffload -InterfaceDescription <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-IpIPv4Enabled <Direction> ] [-NoRestart] [-PassThru] [-TcpIPv4Enabled <Direction> ] [-TcpIPv6Enabled <Direction> ] [-ThrottleLimit <Int32> ] [-UdpIPv4Enabled <Direction> ] [-UdpIPv6Enabled <Direction> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: InputObject (cdxml)
Set-NetAdapterChecksumOffload -InputObject <CimInstance[]> [-AsJob] [-CimSession <CimSession[]> ] [-IpIPv4Enabled <Direction> ] [-NoRestart] [-PassThru] [-TcpIPv4Enabled <Direction> ] [-TcpIPv6Enabled <Direction> ] [-ThrottleLimit <Int32> ] [-UdpIPv4Enabled <Direction> ] [-UdpIPv6Enabled <Direction> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Detailed Description
The Set-NetAdapterChecksumOffload cmdlet sets the state of the checksum offload properties. The network adapter computes the checksums, therefore reducing processor utilization because the processor is not performing this computation. This cmdlet sets the various checksum offload settings, including IPv4, TCPv4, TCPv6, UDPv4, and UDPv6. This cmdlet enables a few types of checksums while disabling others. If only setting the enabled state, run the Enable-NetAdapterChecksumOffload or Disable-NetAdapterChecksumOffload cmdlet.
Parameters
-AsJob
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-CimSession<CimSession[]>
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-IncludeHidden
Specifies both visible and hidden network adapters should be included. By default only visible network adapters are included. If a wildcard character is used in identifying a network adapter and this parameter has been specified, then the wildcard string is matched against both hidden and visible network adapters.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-InputObject<CimInstance[]>
Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.
Aliases |
none |
Required? |
true |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
true (ByValue) |
Accept Wildcard Characters? |
false |
-InterfaceDescription<String[]>
Specifies the network adapter interface description. For a physical network adapter this is typically the name of the vendor of the network adapter followed by a part number and description, such as Contoso 12345 Gigabit Network Device
.
Aliases |
ifDesc |
Required? |
true |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
true (ByPropertyName) |
Accept Wildcard Characters? |
true |
-IpIPv4Enabled<Direction>
Specifies the direction of the IP traffic for IPv4. The acceptable values for this parameter are: Disabled, RxTxEnabled, RxEnabled, or TxEnabled. If RxEnabled or TxEnabled is selected, then the opposite direction (transmit or receive, respectively) is disabled. Such as if the state is RxEnabled, then checksum calculations for receive traffic is enabled and for transmit traffic is Disabled.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-Name<String[]>
Specifies the name of the network adapter.
Aliases |
ifAlias, InterfaceAlias |
Required? |
true |
Position? |
1 |
Default Value |
none |
Accept Pipeline Input? |
true (ByPropertyName) |
Accept Wildcard Characters? |
true |
-NoRestart
Specifies that the network adapter is not restarted as part of running this cmdlet. Note: Many advanced properties require restarting the network adapter before the new settings take effect.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-TcpIPv4Enabled<Direction>
Specifies the direction of the TCP traffic for IPv4. The acceptable values for this parameter are: Disabled, RxTxEnabled, RxEnabled, or TxEnabled. If RxEnabled or TxEnabled is selected, then the opposite direction (transmit or receive, respectively) is disabled. Such as if the state is RxEnabled, then checksum calculations for receive traffic is enabled and for transmit traffic is Disabled.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-TcpIPv6Enabled<Direction>
Specifies the direction of the TCP traffic for IPv6. The acceptable values for this parameter are: Disabled, RxTxEnabled, RxEnabled, or TxEnabled. If RxEnabled or TxEnabled is selected, then the opposite direction (transmit or receive, respectively) is disabled. Such as if the state is RxEnabled, then checksum calculations for receive traffic is enabled and for transmit traffic is Disabled.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-ThrottleLimit<Int32>
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-UdpIPv4Enabled<Direction>
Specifies the direction of the UDP traffic for IPv4. The acceptable values for this parameter are: Disabled, RxTxEnabled, RxEnabled, or TxEnabled. If RxEnabled or TxEnabled is selected, then the opposite direction (transmit or receive, respectively) is disabled. Such as if the state is RxEnabled, then checksum calculations for receive traffic is enabled and for transmit traffic is Disabled.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-UdpIPv6Enabled<Direction>
Specifies the direction of the UDP traffic for IPv6. The acceptable values for this parameter are: Disabled, RxTxEnabled, RxEnabled, or TxEnabled. If RxEnabled or TxEnabled is selected, then the opposite direction (transmit or receive, respectively) is disabled. Such as if the state is RxEnabled, then checksum calculations for receive traffic is enabled and for transmit traffic is Disabled.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-Confirm
Prompts you for confirmation before running the cmdlet.
Required? |
false |
Position? |
named |
Default Value |
false |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? |
false |
Position? |
named |
Default Value |
false |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
<CommonParameters>
This cmdlet supports the common parameters: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, and -OutVariable. For more information, see about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).
Inputs
The input type is the type of the objects that you can pipe to the cmdlet.
Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapter ChecksumOffloadSettingData[]
The
Microsoft.Management.Infrastructure.CimInstance
object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#
) provides the namespace and class name for the underlying WMI object.
Outputs
The output type is the type of the objects that the cmdlet emits.
Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapter ChecksumOffloadSettingData[]
The
Microsoft.Management.Infrastructure.CimInstance
object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#
) provides the namespace and class name for the underlying WMI object.
Examples
EXAMPLE 1
This example enables the IPv4 checksum offload in both receive and transmit directions on all visible network adapters.
PS C:\> Set-NetAdapterChecksumOffload –Name * -IpIPv4Enabled RxTxEnabled
EXAMPLE 2
This example enables the IPv4 checksum, the UDPv4 and IPv4 checksum, and the TCPv4 and IPv4 checksum in both receive and transmit directions on the network adapter named MyAdapter.
PS C:\> Set-NetAdapterChecksumOffload –Name MyAdapter -IpIPv4Enabled RxTxEnabled -TcpIpv4Enabled RxTxEnabled -UdpIpv4Enabled RxTxEnabled
Related topics
Disable-NetAdapterChecksumOffload