报告事件

若要报告事件,必须先在消息文本文件中定义事件。 有关编写消息文本文件的详细信息,请参阅 消息文本文件。 下面显示了此示例中使用的消息文本文件。

; // MyEventProvider.mc 

; // This is the header section.


SeverityNames=(Success=0x0:STATUS_SEVERITY_SUCCESS
               Informational=0x1:STATUS_SEVERITY_INFORMATIONAL
               Warning=0x2:STATUS_SEVERITY_WARNING
               Error=0x3:STATUS_SEVERITY_ERROR
              )


FacilityNames=(System=0x0:FACILITY_SYSTEM
               Runtime=0x2:FACILITY_RUNTIME
               Stubs=0x3:FACILITY_STUBS
               Io=0x4:FACILITY_IO_ERROR_CODE
              )

LanguageNames=(English=0x409:MSG00409)


; // The following are the categories of events.

MessageIdTypedef=WORD

MessageId=0x1
SymbolicName=NETWORK_CATEGORY
Language=English
Network Events
.

MessageId=0x2
SymbolicName=DATABASE_CATEGORY
Language=English
Database Events
.

MessageId=0x3
SymbolicName=UI_CATEGORY
Language=English
UI Events
.


; // The following are the message definitions.

MessageIdTypedef=DWORD

MessageId=0x100
Severity=Error
Facility=Runtime
SymbolicName=MSG_INVALID_COMMAND
Language=English
The command is not valid.
.


MessageId=0x101
Severity=Error
Facility=System
SymbolicName=MSG_BAD_FILE_CONTENTS
Language=English
File %1 contains content that is not valid.
.

MessageId=0x102
Severity=Warning
Facility=System
SymbolicName=MSG_RETRIES
Language=English
There have been %1 retries with %2 success! Disconnect from
the server and try again later.
.

MessageId=0x103
Severity=Informational
Facility=System
SymbolicName=MSG_COMPUTE_CONVERSION
Language=English
%1 %%4096 = %2 %%4097. 
.


; // The following are the parameter strings */


MessageId=0x1000
Severity=Success
Facility=System
SymbolicName=QUARTS_UNITS
Language=English
quarts%0
.

MessageId=0x1001
Severity=Success
Facility=System
SymbolicName=GALLONS_UNITS
Language=English
gallons%0
.

若要编译消息文本文件,请使用以下命令:

mc -U provider.mc

若要编译消息编译器生成的资源,请使用以下命令:

rc provider.rc

若要创建包含消息表字符串资源的仅限资源的 DLL,请使用以下命令 (可以从 Visual Studio 命令提示符) 运行命令:

link -dll -noentry provider.res

下面显示了编译器为上述消息文本文件生成的头文件。 在项目中包括头文件。

// MyEventProvider.mc 
// This is the header section.
// The following are categories of events.
//
//  Values are 32 bit values laid out as follows:
//
//   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
//   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
//  +---+-+-+-----------------------+-------------------------------+
//  |Sev|C|R|     Facility          |               Code            |
//  +---+-+-+-----------------------+-------------------------------+
//
//  where
//
//      Sev - is the severity code
//
//          00 - Success
//          01 - Informational
//          10 - Warning
//          11 - Error
//
//      C - is the Customer code flag
//
//      R - is a reserved bit
//
//      Facility - is the facility code
//
//      Code - is the facility's status code
//
//
// Define the facility codes
//
#define FACILITY_SYSTEM                  0x0
#define FACILITY_STUBS                   0x3
#define FACILITY_RUNTIME                 0x2
#define FACILITY_IO_ERROR_CODE           0x4


//
// Define the severity codes
//
#define STATUS_SEVERITY_WARNING          0x2
#define STATUS_SEVERITY_SUCCESS          0x0
#define STATUS_SEVERITY_INFORMATIONAL    0x1
#define STATUS_SEVERITY_ERROR            0x3


//
// MessageId: NETWORK_CATEGORY
//
// MessageText:
//
// Network Events
//
#define NETWORK_CATEGORY                 ((WORD)0x00000001L)

//
// MessageId: DATABASE_CATEGORY
//
// MessageText:
//
// Database Events
//
#define DATABASE_CATEGORY                ((WORD)0x00000002L)

//
// MessageId: UI_CATEGORY
//
// MessageText:
//
// UI Events
//
#define UI_CATEGORY                      ((WORD)0x00000003L)

 // The following are message definitions.
//
// MessageId: MSG_INVALID_COMMAND
//
// MessageText:
//
// The command is not valid.
//
#define MSG_INVALID_COMMAND              ((DWORD)0xC0020100L)

//
// MessageId: MSG_BAD_FILE_CONTENTS
//
// MessageText:
//
// File %1 contains content that is not valid.
//
#define MSG_BAD_FILE_CONTENTS            ((DWORD)0xC0000101L)

//
// MessageId: MSG_RETRIES
//
// MessageText:
//
// There have been %1 retries with %2 success! Disconnect from
// the server and try again later.
//
#define MSG_RETRIES                      ((DWORD)0x80000102L)

//
// MessageId: MSG_COMPUTE_CONVERSION
//
// MessageText:
//
// %1 %%4096 = %2 %%4097. 
//
#define MSG_COMPUTE_CONVERSION           ((DWORD)0x40000103L)

 // The following are the parameter strings */
//
// MessageId: QUARTS_UNITS
//
// MessageText:
//
// quarts%0
//
#define QUARTS_UNITS                     ((DWORD)0x00001000L)

//
// MessageId: GALLONS_UNITS
//
// MessageText:
//
// gallons%0
//
#define GALLONS_UNITS                    ((DWORD)0x00001001L)

以下示例演示如何使用 ReportEvent 函数写入上述消息文本文件中定义的事件。

#ifndef UNICODE
#define UNICODE
#endif
#include <windows.h>
#include <stdio.h>
#include "provider.h"

#pragma comment(lib, "advapi32.lib")

#define PROVIDER_NAME L"MyEventProvider"

// Hardcoded insert string for the event messages.
CONST LPCWSTR pBadCommand = L"The command that was not valid";
CONST LPCWSTR pFilename = L"c:\\folder\\file.ext";
CONST LPCWSTR pNumberOfRetries = L"3";
CONST LPCWSTR pSuccessfulRetries = L"0";
CONST LPCWSTR pQuarts = L"8";
CONST LPCWSTR pGallons = L"2";

void wmain(void)
{
    HANDLE hEventLog = NULL;
    LPCWSTR pInsertStrings[2] = { NULL, NULL };
    DWORD dwEventDataSize = 0;

    // The source name (provider) must exist as a subkey of Application.
    hEventLog = RegisterEventSource(NULL, PROVIDER_NAME);
    if (NULL == hEventLog)
    {
        wprintf(L"RegisterEventSource failed with 0x%x.\n", GetLastError());
        goto cleanup;
    }

    // This event includes user-defined data as part of the event. The event message
    // does not use insert strings.
    dwEventDataSize = ((DWORD)wcslen(pBadCommand) + 1) * sizeof(WCHAR);
    if (!ReportEvent(hEventLog, EVENTLOG_ERROR_TYPE, UI_CATEGORY, MSG_INVALID_COMMAND, NULL, 0, dwEventDataSize, NULL, const_cast<LPWSTR>(pBadCommand)))
    {
        wprintf(L"ReportEvent failed with 0x%x for event 0x%x.\n", GetLastError(), MSG_INVALID_COMMAND);
        goto cleanup;
    }

    // This event uses insert strings.
    pInsertStrings[0] = pFilename;
    if (!ReportEvent(hEventLog, EVENTLOG_ERROR_TYPE, DATABASE_CATEGORY, MSG_BAD_FILE_CONTENTS, NULL, 1, 0, (LPCWSTR*)pInsertStrings, NULL))
    {
        wprintf(L"ReportEvent failed with 0x%x for event 0x%x.\n", GetLastError(), MSG_BAD_FILE_CONTENTS);
        goto cleanup;
    }

    // This event uses insert strings.
    pInsertStrings[0] = pNumberOfRetries;
    pInsertStrings[1] = pSuccessfulRetries;
    if (!ReportEvent(hEventLog, EVENTLOG_WARNING_TYPE, NETWORK_CATEGORY, MSG_RETRIES, NULL, 2, 0, (LPCWSTR*)pInsertStrings, NULL))
    {
        wprintf(L"ReportEvent failed with 0x%x for event 0x%x.\n", GetLastError(), MSG_RETRIES);
        goto cleanup;
    }

    // This event uses insert strings.
    pInsertStrings[0] = pQuarts;
    pInsertStrings[1] = pGallons;
    if (!ReportEvent(hEventLog, EVENTLOG_INFORMATION_TYPE, UI_CATEGORY, MSG_COMPUTE_CONVERSION, NULL, 2, 0, (LPCWSTR*)pInsertStrings, NULL))
    {
        wprintf(L"ReportEvent failed with 0x%x for event 0x%x.\n", GetLastError(), MSG_COMPUTE_CONVERSION);
        goto cleanup;
    }

    wprintf(L"All events successfully reported.\n");

cleanup:

    if (hEventLog)
        DeregisterEventSource(hEventLog);
}

运行此示例之前,请在注册表中注册提供程序。 有关注册表设置的详细信息,请参阅 事件源。 在以下项下添加“MyEventProvider”作为注册表项:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\eventlog\Application

下面显示了要为“MyEventProvider”注册表项设置的注册表值。

值名称 类型 值数据
CategoryCount REG_DWORD 0x00000003
CategoryMessageFile REG_SZ path\provider.dll
EventMessageFile REG_SZ path\provider.dll
ParameterMessageFile REG_SZ path\provider.dll
TypesSupported REG_DWORD 0x00000007