将解码器添加到拓扑

项目
01/28/2024

本主题介绍如何将音频或视频解码器添加到拓扑。

对于大多数播放应用程序，可以从发送到媒体会话的部分拓扑中省略解码器。媒体会话使用拓扑加载程序来完成拓扑，拓扑加载程序插入所需的任何解码器。但是，如果要选择特定的解码器，可以手动将解码器添加到拓扑。

下面是将解码器添加到拓扑的总体步骤。

查找解码器的 CLSID。
在拓扑中添加解码器的节点。
对于视频解码器，请启用 DirectX 视频加速。音频解码器不需要此步骤。

查找解码器 CLSID

如果要使用特定的解码器，你可能已经知道解码器的 CLSID。如果是这样，可以跳过此步骤。否则，请使用 MFTEnum 函数在注册表中查找 CLSID。此函数采用多个搜索条件作为输入。若要查找解码器，只需 (主类型和子类型) 指定输入格式。可以从流描述符获取这些内容，如以下代码所示。

// Returns the MFT decoder based on the major type GUID.

HRESULT GetDecoderCategory(const GUID& majorType, GUID *pCategory)
{
    if (majorType == MFMediaType_Video)
    {
        *pCategory = MFT_CATEGORY_VIDEO_DECODER;
    }
    else if (majorType == MFMediaType_Audio)
    {
        *pCategory = MFT_CATEGORY_AUDIO_DECODER;
    }
    else
    {
        return MF_E_INVALIDMEDIATYPE;
    }
    return S_OK;
}

// Finds a decoder for a stream.
//
// If the stream is not compressed, pCLSID receives the value GUID_NULL.

HRESULT FindDecoderForStream(
    IMFStreamDescriptor *pSD,   // Stream descriptor for the stream.
    CLSID *pCLSID               // Receives the CLSID of the decoder.
    )
{
    BOOL    bIsCompressed = FALSE;
    GUID    guidMajorType = GUID_NULL;
    GUID    guidSubtype = GUID_NULL;
    GUID    guidDecoderCategory = GUID_NULL;

    CLSID *pDecoderCLSIDs = NULL;   // Pointer to an array of CLISDs. 
    UINT32 cDecoderCLSIDs = NULL;   // Size of the array.

    IMFMediaTypeHandler *pHandler = NULL;
    IMFMediaType *pMediaType = NULL;

    // Find the media type for the stream.
    HRESULT hr = pSD->GetMediaTypeHandler(&pHandler);

    if (SUCCEEDED(hr))
    {
        hr = pHandler->GetCurrentMediaType(&pMediaType);
    }

    // Get the major type and subtype.
    if (SUCCEEDED(hr))
    {
        hr = pMediaType->GetMajorType(&guidMajorType);
    }

    if (SUCCEEDED(hr))
    {
        hr = pMediaType->GetGUID(MF_MT_SUBTYPE, &guidSubtype);
    }

    // Check whether the stream is compressed.
    if (SUCCEEDED(hr))
    {
        hr = pMediaType->IsCompressedFormat(&bIsCompressed);
    }

#if (WINVER < _WIN32_WINNT_WIN7)

    // Starting in Windows 7, you can connect an uncompressed video source 
    // directly to the EVR. In earlier versions of Media Foundation, this
    // is not supported.

    if (SUCCEEDED(hr))
    {
        if (!bIsCompressed && (guidMajorType == MFMediaType_Video))
        {
            hr = MF_E_INVALIDMEDIATYPE;
        }
    }
#endif

    // If the stream is compressed, find a decoder.
    if (SUCCEEDED(hr))
    {
        if (bIsCompressed)
        {
            // Select the decoder category from the major type (audio/video).
            hr = GetDecoderCategory(guidMajorType, &guidDecoderCategory);

            // Look for a decoder.

            if (SUCCEEDED(hr))
            {
                MFT_REGISTER_TYPE_INFO tinfo;
                tinfo.guidMajorType = guidMajorType;
                tinfo.guidSubtype = guidSubtype;

                hr = MFTEnum(
                        guidDecoderCategory,
                        0,               // Reserved
                        &tinfo,          // Input type to match. (Encoded type.)
                        NULL,            // Output type to match. (Don't care.)
                        NULL,            // Attributes to match. (None.)
                        &pDecoderCLSIDs, // Receives a pointer to an array of CLSIDs.
                        &cDecoderCLSIDs  // Receives the size of the array.
                        );
            }

            // MFTEnum can return zero matches.
            if (SUCCEEDED(hr) && (cDecoderCLSIDs == 0))
            {
                hr = MF_E_TOPO_CODEC_NOT_FOUND;
            }

            // Return the first CLSID in the list to the caller.
            if (SUCCEEDED(hr))
            {
                *pCLSID = pDecoderCLSIDs[0];
            }
        }
        else
        {
            // Uncompressed. A decoder is not required.
            *pCLSID = GUID_NULL;
        }
    }

    SafeRelease(&pHandler);
    SafeRelease(&pMediaType);
    CoTaskMemFree(pDecoderCLSIDs);

    return hr;
}

有关流描述符的详细信息，请参阅演示文稿描述符。

MFTEnum 函数返回指向 CLSID 数组的指针。返回的数组的顺序是任意的。在此示例中，该函数使用数组中的第一个 CLSID。可以通过调用 MFTGetInfo 获取有关解码器的详细信息，包括解码器的友好名称。另请注意， MFTEnum 可以成功，但返回空数组，因此检查在最后一个参数中返回的数组大小非常重要。

将解码器节点添加到拓扑

获取解码器的 CLSID 后，通过调用 MFCreateTopology 创建新的转换节点。通过在节点上设置 MF_TOPONODE_TRANSFORM_OBJECTID 属性来指定 CLSID。有关如何创建转换节点的示例，请参阅 “创建转换节点”。然后，通过调用 IMFTopologyNode：：ConnectOutput 将源节点连接到解码器节点，并将解码器节点连接到输出节点。

以下示例演示如何创建节点并连接它们。该示例与主题AddBranchToPartialTopology“创建播放拓扑”中所示的示例函数非常相似。唯一的区别是此示例为解码器添加额外的节点。

HRESULT AddBranchToPartialTopologyWithDecoder(
    IMFTopology *pTopology,         // Topology.
    IMFMediaSource *pSource,        // Media source.
    IMFPresentationDescriptor *pPD, // Presentation descriptor.
    DWORD iStream,                  // Stream index.
    HWND hVideoWnd                  // Window for video playback.
    )
{
    IMFStreamDescriptor *pSD = NULL;
    IMFActivate         *pSinkActivate = NULL;
    IMFTopologyNode     *pSourceNode = NULL;
    IMFTopologyNode     *pOutputNode = NULL;
    IMFTopologyNode     *pDecoderNode = NULL;

    BOOL fSelected = FALSE;
    CLSID clsidDecoder = GUID_NULL;

    // Get the stream descriptor.
    HRESULT hr = pPD->GetStreamDescriptorByIndex(iStream, &fSelected, &pSD);
    if (FAILED(hr))
    {
        return hr;
    }

    if (fSelected)
    {
        // Add a source node for this stream.
        hr = AddSourceNode(pTopology, pSource, pPD, pSD, &pSourceNode);

        // Create the media sink activation object.
        if (SUCCEEDED(hr))
        {
            hr = CreateMediaSinkActivate(pSD, hVideoWnd, &pSinkActivate);
        }

        // Create the output node for the renderer.
        if (SUCCEEDED(hr))
        {
            hr = AddOutputNode(pTopology, pSinkActivate, 0, &pOutputNode);
        }

        // Find a decoder.
        if (SUCCEEDED(hr))
        {
            hr = FindDecoderForStream(pSD, &clsidDecoder);
        }

        if (SUCCEEDED(hr))
        {
            if (clsidDecoder == GUID_NULL)
            {
                // No decoder is required. 
                // Connect the source node to the output node.
                hr = pSourceNode->ConnectOutput(0, pOutputNode, 0);
            }
            else
            {
                // Add a decoder node.
                hr = AddTransformNode(pTopology, clsidDecoder, &pDecoderNode);

                // Connect the source node to the decoder node.
                if (SUCCEEDED(hr))
                {
                    hr = pSourceNode->ConnectOutput(0, pDecoderNode, 0);
                }

                // Connect the decoder node to the output node.
                if (SUCCEEDED(hr))
                {
                    hr = pDecoderNode->ConnectOutput(0, pOutputNode, 0);
                }
            }
        }

        // Mark this branch as not requiring a decoder.
        if (SUCCEEDED(hr))
        {
            hr = pOutputNode->SetUINT32(
                MF_TOPONODE_CONNECT_METHOD, 
                MF_CONNECT_ALLOW_CONVERTER
                );
        }

        if (SUCCEEDED(hr))
        {
            hr = pDecoderNode->SetUINT32(
                MF_TOPONODE_CONNECT_METHOD, 
                MF_CONNECT_ALLOW_CONVERTER
                );
        }

    }
    // else: If not selected, don't add the branch. 

    SafeRelease(&pSD);
    SafeRelease(&pSinkActivate);
    SafeRelease(&pSourceNode);
    SafeRelease(&pOutputNode);
    SafeRelease(&pDecoderNode);

    return hr;
}

启用视频加速

将音频或视频解码器添加到拓扑中的下一步仅适用于视频解码器。若要获得视频播放的最佳性能，如果视频解码器支持 DirectX 视频加速，则应启用 DirectX 视频加速 (DXVA) 。通常，此步骤由拓扑加载程序执行，但如果手动将解码器添加到拓扑中，则必须自行执行此步骤。

作为此步骤的先决条件，拓扑中的所有输出节点都必须绑定到媒体接收器。有关详细信息，请参阅将输出节点绑定到媒体接收器。

首先，在托管 Direct3D 设备管理器的拓扑中找到对象。为此，请从每个节点获取对象指针，并查询 IDirect3DDeviceManager9 服务的对象。通常，增强的视频呈现器 (EVR) 充当此角色。以下代码显示查找设备管理器的函数：

// Finds the node in the topology that provides the Direct3D device manager. 

HRESULT FindDeviceManager(
    IMFTopology *pTopology,         // Topology to search.
    IUnknown **ppDeviceManager,     // Receives a pointer to the device manager.
    IMFTopologyNode **ppNode        // Receives a pointer to the node.
    )
{
    HRESULT hr = S_OK;
    WORD cNodes = 0;
    BOOL bFound = FALSE;

    IMFTopologyNode *pNode = NULL;
    IUnknown *pNodeObject = NULL;
    IDirect3DDeviceManager9 *pD3DManager = NULL;

    // Search all of the nodes in the topology.
    
    hr = pTopology->GetNodeCount(&cNodes);

    if (FAILED(hr))
    {
        return hr;
    }

    for (WORD i = 0; i < cNodes; i++)
    {
        // For each of the following calls, failure just means we 
        // did not find the node we're looking for, so keep looking. 

        hr = pTopology->GetNode(i, &pNode);

        // Get the node's object pointer.
        if (SUCCEEDED(hr))
        {
            hr = pNode->GetObject(&pNodeObject);
        }

        // Query the node object for the device manager service.
        if (SUCCEEDED(hr))
        {
            hr = MFGetService(
                pNodeObject, 
                MR_VIDEO_ACCELERATION_SERVICE, 
                IID_PPV_ARGS(&pD3DManager)
                );
        }

        if (SUCCEEDED(hr))
        {
            // Found the right node. Return the pointers to the caller.
            *ppDeviceManager = pD3DManager;
            (*ppDeviceManager)->AddRef();

            *ppNode = pNode;
            (*ppNode)->AddRef();

            bFound = TRUE;
            break;
        }

        SafeRelease(&pNodeObject);
        SafeRelease(&pD3DManager);
        SafeRelease(&pNode);

    } // End of for loop.

    SafeRelease(&pNodeObject);
    SafeRelease(&pD3DManager);
    SafeRelease(&pNode);

    return bFound ? S_OK : E_FAIL;
}

接下来，查找直接从包含 Direct3D 设备管理器的节点上游的转换节点。从此转换节点获取 IMFTransform 指针。 IMFTransform 指针表示媒体基础转换 (MFT) 。根据节点的创建方式，可能需要通过调用 CoCreateInstance 来创建 MFT，或者从激活对象激活 MFT。以下代码处理所有各种情况：

// Returns the MFT for a transform node.

HRESULT GetTransformFromNode(
    IMFTopologyNode *pNode, 
    IMFTransform **ppMFT
    )
{
    MF_TOPOLOGY_TYPE type = MF_TOPOLOGY_MAX;

    IUnknown *pNodeObject = NULL;
    IMFTransform *pMFT = NULL;
    IMFActivate *pActivate = NULL;
    IMFAttributes *pAttributes = NULL;

    // Is this a transform node?
    HRESULT hr = pNode->GetNodeType(&type);

    if (FAILED(hr))
    {
        return hr;
    }

    if (type != MF_TOPOLOGY_TRANSFORM_NODE)
    {
        // Wrong node type.
        return E_FAIL;
    }

    // Check whether the node has an object pointer.
    hr = pNode->GetObject(&pNodeObject);

    if (SUCCEEDED(hr))
    {
        // The object pointer should be one of the following:
        // 1. Pointer to an MFT.
        // 2. Pointer to an activation object.

        // Is it an MFT? Query for IMFTransform.
        hr = pNodeObject->QueryInterface(IID_IMFTransform, (void**)&pMFT);
        if (FAILED(hr))
        {
            // It is not an MFT, so it should be an activation object.
            hr = pNodeObject->QueryInterface(IID_PPV_ARGS(&pActivate));

            // Use the activation object to create the MFT.

            if (SUCCEEDED(hr))
            {
                hr = pActivate->ActivateObject(IID_PPV_ARGS(&pMFT));
            }

            // Replace the node's object pointer with the MFT.
            if (SUCCEEDED(hr))
            {
                hr = pNode->SetObject(pMFT);
            }

            // If the activation object has the MF_ACTIVATE_MFT_LOCKED 
            // attribute, transfer this value to the
            // MF_TOPONODE_MFT_LOCKED attribute on the node.
            // However, don't fail if this attribute is not found.
            if (SUCCEEDED(hr))
            {
                BOOL bLocked = MFGetAttributeUINT32(
                    pActivate, MF_ACTIVATE_MFT_LOCKED, FALSE);


                hr = pNode->SetUINT32(MF_TOPONODE_LOCKED, bLocked);
            }
        }
    }
    else
    {
        GUID clsidMFT;

        // The node does not have an object pointer. Look for a CLSID.
        hr = pNode->GetGUID(MF_TOPONODE_TRANSFORM_OBJECTID, &clsidMFT);
       
        // Create the MFT.
        if (SUCCEEDED(hr))
        {
            hr = CoCreateInstance(
                clsidMFT, NULL,
                CLSCTX_INPROC_SERVER, 
                IID_PPV_ARGS(&pMFT)
                );
        }

        // If the MFT supports attributes, copy the node attributes to the 
        // MFT attribute store. 
        if (SUCCEEDED(hr))
        {
            if (SUCCEEDED(pMFT->GetAttributes(&pAttributes)))
            {
                // Copy from pNode to pAttributes.
                hr = pNode->CopyAllItems(pAttributes); 
            }
        }

        // Set the object on the node.
        if (SUCCEEDED(hr))
        {
            hr = pNode->SetObject(pMFT);
        }
    }

    // Return the IMFTransform pointer to the caller.
    if (SUCCEEDED(hr))
    {
        *ppMFT = pMFT;
        (*ppMFT)->AddRef();
    }

    SafeRelease(&pNodeObject);
    SafeRelease(&pMFT);
    SafeRelease(&pActivate);
    SafeRelease(&pAttributes);
    return hr;
}

如果 MFT 具有值为 TRUE的 MF_SA_D3D_AWARE 属性，则表示 MFT 支持 DirectX 视频加速。以下函数测试此属性：

// Returns TRUE is an MFT supports DirectX Video Acceleration.

BOOL IsTransformD3DAware(IMFTransform *pMFT)
{
    BOOL bD3DAware = FALSE;
    
    IMFAttributes *pAttributes = NULL;

    HRESULT hr = pMFT->GetAttributes(&pAttributes);
    if (SUCCEEDED(hr))
    {
        bD3DAware = MFGetAttributeUINT32(pAttributes, MF_SA_D3D_AWARE, FALSE);
        pAttributes->Release();
    }
    return bD3DAware;
}

若要在此 MFT 上启用视频加速，请使用MFT_MESSAGE_SET_D3D_MANAGER消息调用 IMFTransform：:P rocessMessage 。还将转换节点上 的 MF_TOPONODE_D3DAWARE 属性设置为 TRUE 。此属性通知管道视频加速已启用。以下代码执行以下步骤：

// Enables or disables DirectX Video Acceleration in a topology.

HRESULT EnableVideoAcceleration(IMFTopology *pTopology, BOOL bEnable)
{
    IMFTopologyNode *pD3DManagerNode = NULL;
    IMFTopologyNode *pUpstreamNode = NULL;
    IUnknown *pD3DManager = NULL;
    IMFTransform *pMFT = NULL;

    // Look for the node that supports the Direct3D Manager.
    
    HRESULT hr = FindDeviceManager(pTopology, &pD3DManager, &pD3DManagerNode); 
    if (FAILED(hr))
    {
        //  There is no Direct3D device manager in the topology.
        //  This is not a failure case.
        return S_OK;
    }

    DWORD dwOutputIndex = 0;

    // Get the node upstream from the device manager node.
    hr = pD3DManagerNode->GetInput(0, &pUpstreamNode, &dwOutputIndex);

    // Get the MFT from the upstream node.
    if (SUCCEEDED(hr))
    {
        hr = GetTransformFromNode(pUpstreamNode, &pMFT);
    }

    // If the MFT is Direct3D-aware, notify the MFT of the device 
    // manager and mark the topology node as Direct3D-aware.
    if (SUCCEEDED(hr))
    {
        if (IsTransformD3DAware(pMFT))
        {
            ULONG_PTR ptr = bEnable ? (ULONG_PTR)pD3DManager : NULL;

            hr = pMFT->ProcessMessage(MFT_MESSAGE_SET_D3D_MANAGER, ptr);

            // Mark the node.
            if (SUCCEEDED(hr))
            {
                hr = pUpstreamNode->SetUINT32(MF_TOPONODE_D3DAWARE, bEnable);
            }
        }
    }

    SafeRelease(&pD3DManagerNode);
    SafeRelease(&pUpstreamNode);
    SafeRelease(&pD3DManager);
    SafeRelease(&pMFT);
    return hr;
}

有关 Media Foundation 中的 DXVA 的详细信息，请参阅 DirectX 视频加速 2.0。

高级拓扑生成

通过

将解码器添加到拓扑

查找解码器 CLSID

将解码器节点添加到拓扑

启用视频加速

反馈

反馈

其他资源

通过

将解码器添加到拓扑

查找解码器 CLSID

将解码器节点添加到拓扑

启用视频加速

相关主题

反馈

反馈

其他资源