分享方式：

逐步解說：在啟用 COM 的應用程式中使用並行執行階段

  • 文章

本檔示範如何在使用元件物件模型 （COM） 的應用程式中使用並行執行時間。

必要條件

開始本逐步解說之前，請先閱讀下列檔：

如需 COM 的詳細資訊，請參閱 元件物件模型 （COM） 。

管理 COM 程式庫的存留期

雖然使用 COM 搭配並行執行時間遵循與任何其他並行機制相同的原則，但下列指導方針可協助您有效地使用這些程式庫。

  • 執行緒必須先呼叫 CoInitializeEx ，才能使用 COM 程式庫。

  • 只要執行緒為每個呼叫提供相同的引數，執行緒就可以呼叫 CoInitializeEx 多次。

  • 對於每個 呼叫 CoInitializeEx ，執行緒也必須呼叫 CoUninitialize 。 換句話說，對 和 CoUninitialize 的 CoInitializeEx 呼叫必須平衡。

  • 若要從一個執行緒 Apartment 切換到另一個執行緒，執行緒必須先完全釋放 COM 程式庫，才能使用新的執行緒規格呼叫 CoInitializeEx 。

當您搭配並行執行時間使用 COM 時，適用其他 COM 原則。 例如，在單一執行緒 Apartment 中建立物件的應用程式，並將該物件封送處理至另一個 Apartment 的應用程式也必須提供訊息迴圈來處理傳入訊息。 也請記住，在 Apartment 之間封送處理物件可能會降低效能。

搭配平行模式程式庫使用 COM

例如，當您在平行模式程式庫 （PPL） 中搭配元件使用 COM 時，請在每個工作或反復專案期間使用 COM 程式庫之前呼叫 CoInitializeEx ，並在每個工作或反復專案完成之前呼叫 CoUninitialize 。 下列範例示範如何使用並行：：structured_task_group 物件來管理 COM 程式庫 的存留期。

structured_task_group tasks;

// Create and run a task.
auto task = make_task([] {
   // Initialize the COM library on the current thread.
   CoInitializeEx(NULL, COINIT_MULTITHREADED);

   // TODO: Perform task here.

   // Free the COM library.
   CoUninitialize();
});   
tasks.run(task);

// TODO: Run additional tasks here.

// Wait for the tasks to finish.
tasks.wait();

當工作或平行演算法取消或工作主體擲回例外狀況時，您必須確定已正確釋放 COM 程式庫。 若要保證工作在結束之前呼叫 CoUninitialize ，請使用 try-finally 區塊或 資源擷取是初始化 （RAII） 模式。 下列範例會使用 try-finally 區塊，在工作完成或取消時，或擲回例外狀況時釋放 COM 程式庫。

structured_task_group tasks;

// Create and run a task.
auto task = make_task([] {
   bool coinit = false;            
   __try {
      // Initialize the COM library on the current thread.
      CoInitializeEx(NULL, COINIT_MULTITHREADED);
      coinit = true;

      // TODO: Perform task here.
   }
   __finally {
      // Free the COM library.
      if (coinit)
         CoUninitialize();
   }      
});
tasks.run(task);

// TODO: Run additional tasks here.

// Wait for the tasks to finish.
tasks.wait();

下列範例會使用 RAII 模式來定義 CCoInitializer 類別，以管理指定範圍內 COM 程式庫的存留期。

// An exception-safe wrapper class that manages the lifetime 
// of the COM library in a given scope.
class CCoInitializer
{
public:
   explicit CCoInitializer(DWORD dwCoInit = COINIT_APARTMENTTHREADED)
      : _coinitialized(false)
   {
      // Initialize the COM library on the current thread.
      HRESULT hr = CoInitializeEx(NULL, dwCoInit);
      if (SUCCEEDED(hr))
         _coinitialized = true;
   }
   ~CCoInitializer()
   {
      // Free the COM library.
      if (_coinitialized)
         CoUninitialize();
   }
private:
   // Flags whether COM was properly initialized.
   bool _coinitialized;

   // Hide copy constructor and assignment operator.
   CCoInitializer(const CCoInitializer&);
   CCoInitializer& operator=(const CCoInitializer&);
};

您可以使用 類別 CCoInitializer ，在工作結束時自動釋放 COM 程式庫，如下所示。

structured_task_group tasks;

// Create and run a task.
auto task = make_task([] {
   // Enable COM for the lifetime of the task.
   CCoInitializer coinit(COINIT_MULTITHREADED);

   // TODO: Perform task here.

   // The CCoInitializer object frees the COM library
   // when the task exits.
});
tasks.run(task);

// TODO: Run additional tasks here.

// Wait for the tasks to finish.
tasks.wait();

如需並行執行時間中取消的詳細資訊，請參閱 PPL 中的取消。

搭配非同步代理程式使用 COM

當您搭配非同步代理程式使用 COM 時， CoInitializeEx 請在代理程式的 concurrency：：agent：：run 方法中使用 COM 程式庫之前呼叫 。 然後在方法傳回之前 run 呼叫 CoUninitialize 。 請勿在代理程式的建構函式或解構函式中使用 COM 管理常式，也不會覆寫 concurrency：：agent：：start 或 concurrency：：agent：:d one 方法，因為這些方法是從方法不同的執行緒 run 呼叫。

下列範例示範名為 CCoAgent 的基本代理程式類別，該類別會在 方法中 run 管理 COM 程式庫。

class CCoAgent : public agent
{
protected:
   void run()
   {
      // Initialize the COM library on the current thread.
      CoInitializeEx(NULL, COINIT_MULTITHREADED);

      // TODO: Perform work here.
      
      // Free the COM library.
      CoUninitialize();

      // Set the agent to the finished state.
      done();
   }
};

本逐步解說稍後會提供完整的範例。

搭配輕量型工作使用 COM

工作排程器 檔 描述並行執行時間中輕量型工作的角色。 您可以使用 COM 搭配輕量型工作，就像您在 Windows API 中傳遞至 CreateThread 函式的任何執行緒常式一樣。 下列範例會顯示這一點。

// A basic lightweight task that you schedule directly from a 
// Scheduler or ScheduleGroup object.
void ThreadProc(void* data)
{
   // Initialize the COM library on the current thread.
   CoInitializeEx(NULL, COINIT_MULTITHREADED);

   // TODO: Perform work here.
      
   // Free the COM library.
   CoUninitialize();
}

啟用 COM 的應用程式範例

本節顯示一個完整的 COM 啟用應用程式，該應用程式會使用 IScriptControl 介面來執行計算第 n 個 Fibonacci 數位的腳本。 此範例會先從主執行緒呼叫腳本，然後使用 PPL 和代理程式同時呼叫腳本。

請考慮下列 Helper 函式， RunScriptProcedure 其會呼叫 物件中的 IScriptControl 程式。

// Calls a procedure in an IScriptControl object.
template<size_t ArgCount>
_variant_t RunScriptProcedure(IScriptControlPtr pScriptControl, 
   _bstr_t& procedureName, array<_variant_t, ArgCount>& arguments)
{
   // Create a 1-dimensional, 0-based safe array.
   SAFEARRAYBOUND rgsabound[]  = { ArgCount, 0 };
   CComSafeArray<VARIANT> sa(rgsabound, 1U);

   // Copy the arguments to the safe array.
   LONG lIndex = 0;
   for_each(begin(arguments), end(arguments), [&](_variant_t& arg) {
      HRESULT hr = sa.SetAt(lIndex, arg);
      if (FAILED(hr))
         throw hr;
      ++lIndex;
   });

   //  Call the procedure in the script.
   return pScriptControl->Run(procedureName, &sa.m_psa);
}

函 wmain 式會 IScriptControl 建立 物件、將腳本程式碼新增至該物件，以計算第 n 個 Fibonacci 數位，然後呼叫 函 RunScriptProcedure 式來執行該腳本。

int wmain()
{
   HRESULT hr;

   // Enable COM on this thread for the lifetime of the program.   
   CCoInitializer coinit(COINIT_MULTITHREADED);
     
   // Create the script control.
   IScriptControlPtr pScriptControl(__uuidof(ScriptControl));
   
   // Set script control properties.
   pScriptControl->Language = "JScript";
   pScriptControl->AllowUI = TRUE;

   // Add script code that computes the nth Fibonacci number.
   hr = pScriptControl->AddCode(
      "function fib(n) { if (n<2) return n; else return fib(n-1) + fib(n-2); }" );
   if (FAILED(hr))
      return hr;

   // Test the script control by computing the 15th Fibonacci number.
   wcout << endl << L"Main Thread:" << endl;
   LONG lValue = 15;
   array<_variant_t, 1> args = { _variant_t(lValue) };
   _variant_t result = RunScriptProcedure(
      pScriptControl, 
      _bstr_t("fib"), 
      args);
   // Print the result.
   wcout << L"fib(" << lValue << L") = " << result.lVal << endl;

   return S_OK;
}

從 PPL 呼叫腳本

下列函 ParallelFibonacci 式會 使用 concurrency：:p arallel_for 演算法平行呼叫腳本。 此函式會 CCoInitializer 使用 類別來管理工作每次反覆運算期間 COM 程式庫的存留期。

// Computes multiple Fibonacci numbers in parallel by using 
// the parallel_for algorithm.
HRESULT ParallelFibonacci(IScriptControlPtr pScriptControl)
{
   try {
      parallel_for(10L, 20L, [&pScriptControl](LONG lIndex) 
      {
         // Enable COM for the lifetime of the task.
         CCoInitializer coinit(COINIT_MULTITHREADED);

         // Call the helper function to run the script procedure.
         array<_variant_t, 1> args = { _variant_t(lIndex) };
         _variant_t result = RunScriptProcedure(
            pScriptControl, 
            _bstr_t("fib"), 
            args);
         
         // Print the result.
         wstringstream ss;         
         ss << L"fib(" << lIndex << L") = " << result.lVal << endl;
         wcout << ss.str();
      });
   }
   catch (HRESULT hr) {
      return hr;
   }
   return S_OK;
}

若要搭配範例使用 函 ParallelFibonacci 式，請在函式傳回之前 wmain 新增下列程式碼。

// Use the parallel_for algorithm to compute multiple 
// Fibonacci numbers in parallel.
wcout << endl << L"Parallel Fibonacci:" << endl;
if (FAILED(hr = ParallelFibonacci(pScriptControl)))
   return hr;

從代理程式呼叫腳本

下列範例顯示 類別 FibonacciScriptAgent ，其會呼叫腳本程式來計算第 n 個 Fibonacci 數位。 類別 FibonacciScriptAgent 會使用訊息傳遞至腳本函式，以從主要程式接收輸入值。 方法 run 會管理整個工作的 COM 程式庫存留期。

// A basic agent that calls a script procedure to compute the 
// nth Fibonacci number.
class FibonacciScriptAgent : public agent
{
public:
   FibonacciScriptAgent(IScriptControlPtr pScriptControl, ISource<LONG>& source)
      : _pScriptControl(pScriptControl)
      , _source(source) { }

public:
   // Retrieves the result code.
   HRESULT GetHRESULT() 
   {
      return receive(_result);
   }

protected:
   void run()
   {
      // Initialize the COM library on the current thread.
      CoInitializeEx(NULL, COINIT_MULTITHREADED);

      // Read values from the message buffer until 
      // we receive the sentinel value.      
      LONG lValue;
      while ((lValue = receive(_source)) != Sentinel)
      {
         try {
            // Call the helper function to run the script procedure.
            array<_variant_t, 1> args = { _variant_t(lValue) };
            _variant_t result = RunScriptProcedure(
               _pScriptControl, 
               _bstr_t("fib"), 
               args);
            
            // Print the result.
            wstringstream ss;         
            ss << L"fib(" << lValue << L") = " << result.lVal << endl;
            wcout << ss.str();
         }
         catch (HRESULT hr) {
            send(_result, hr);
            break;    
         }
      }

      // Set the result code (does nothing if a value is already set).
      send(_result, S_OK);

      // Free the COM library.
      CoUninitialize();

      // Set the agent to the finished state.
      done();
   }

public:
   // Signals the agent to terminate.
   static const LONG Sentinel = 0L;

private:
   // The IScriptControl object that contains the script procedure.
   IScriptControlPtr _pScriptControl;
   // Message buffer from which to read arguments to the 
   // script procedure.
   ISource<LONG>& _source;
   // The result code for the overall operation.
   single_assignment<HRESULT> _result;
};

下列函式 AgentFibonacci 會建立數個 物件，並使用訊息傳遞將數 FibonacciScriptAgent 個輸入值傳送給這些物件。

// Computes multiple Fibonacci numbers in parallel by using 
// asynchronous agents.
HRESULT AgentFibonacci(IScriptControlPtr pScriptControl)
{
   // Message buffer to hold arguments to the script procedure.
   unbounded_buffer<LONG> values;

   // Create several agents.
   array<agent*, 3> agents = 
   {
      new FibonacciScriptAgent(pScriptControl, values),
      new FibonacciScriptAgent(pScriptControl, values),
      new FibonacciScriptAgent(pScriptControl, values),
   };

   // Start each agent.
   for_each(begin(agents), end(agents), [](agent* a) {
      a->start();
   });

   // Send a few values to the agents.
   send(values, 30L);
   send(values, 22L);
   send(values, 10L);
   send(values, 12L);
   // Send a sentinel value to each agent.
   for_each(begin(agents), end(agents), [&values](agent*) {
      send(values, FibonacciScriptAgent::Sentinel);
   });

   // Wait for all agents to finish.
   agent::wait_for_all(3, &agents[0]);

   // Determine the result code.
   HRESULT hr = S_OK;
   for_each(begin(agents), end(agents), [&hr](agent* a) {
      HRESULT hrTemp;
      if (FAILED(hrTemp = 
         reinterpret_cast<FibonacciScriptAgent*>(a)->GetHRESULT()))
      {
         hr = hrTemp;
      }
   });

   // Clean up.
   for_each(begin(agents), end(agents), [](agent* a) {
      delete a;
   });

   return hr;
}

若要搭配範例使用 函 AgentFibonacci 式，請在函式傳回之前 wmain 新增下列程式碼。

// Use asynchronous agents to compute multiple 
// Fibonacci numbers in parallel.
wcout << endl << L"Agent Fibonacci:" << endl;
if (FAILED(hr = AgentFibonacci(pScriptControl)))
   return hr;

完整範例

下列程式碼顯示完整的範例，它會使用平行演算法和非同步代理程式來呼叫計算 Fibonacci 數位的腳本程式。

// parallel-scripts.cpp
// compile with: /EHsc 

#include <agents.h>
#include <ppl.h>
#include <array>
#include <sstream>
#include <iostream>
#include <atlsafe.h>

// TODO: Change this path if necessary.
#import "C:\windows\system32\msscript.ocx"

using namespace concurrency;
using namespace MSScriptControl;
using namespace std;

// An exception-safe wrapper class that manages the lifetime 
// of the COM library in a given scope.
class CCoInitializer
{
public:
   explicit CCoInitializer(DWORD dwCoInit = COINIT_APARTMENTTHREADED)
      : _coinitialized(false)
   {
      // Initialize the COM library on the current thread.
      HRESULT hr = CoInitializeEx(NULL, dwCoInit);
      if (FAILED(hr))
         throw hr;
      _coinitialized = true;
   }
   ~CCoInitializer()
   {
      // Free the COM library.
      if (_coinitialized)
         CoUninitialize();
   }
private:
   // Flags whether COM was properly initialized.
   bool _coinitialized;

   // Hide copy constructor and assignment operator.
   CCoInitializer(const CCoInitializer&);
   CCoInitializer& operator=(const CCoInitializer&);
};

// Calls a procedure in an IScriptControl object.
template<size_t ArgCount>
_variant_t RunScriptProcedure(IScriptControlPtr pScriptControl, 
   _bstr_t& procedureName, array<_variant_t, ArgCount>& arguments)
{
   // Create a 1-dimensional, 0-based safe array.
   SAFEARRAYBOUND rgsabound[]  = { ArgCount, 0 };
   CComSafeArray<VARIANT> sa(rgsabound, 1U);

   // Copy the arguments to the safe array.
   LONG lIndex = 0;
   for_each(begin(arguments), end(arguments), [&](_variant_t& arg) {
      HRESULT hr = sa.SetAt(lIndex, arg);
      if (FAILED(hr))
         throw hr;
      ++lIndex;
   });

   //  Call the procedure in the script.
   return pScriptControl->Run(procedureName, &sa.m_psa);
}

// Computes multiple Fibonacci numbers in parallel by using 
// the parallel_for algorithm.
HRESULT ParallelFibonacci(IScriptControlPtr pScriptControl)
{
   try {
      parallel_for(10L, 20L, [&pScriptControl](LONG lIndex) 
      {
         // Enable COM for the lifetime of the task.
         CCoInitializer coinit(COINIT_MULTITHREADED);

         // Call the helper function to run the script procedure.
         array<_variant_t, 1> args = { _variant_t(lIndex) };
         _variant_t result = RunScriptProcedure(
            pScriptControl, 
            _bstr_t("fib"), 
            args);
         
         // Print the result.
         wstringstream ss;         
         ss << L"fib(" << lIndex << L") = " << result.lVal << endl;
         wcout << ss.str();
      });
   }
   catch (HRESULT hr) {
      return hr;
   }
   return S_OK;
}

// A basic agent that calls a script procedure to compute the 
// nth Fibonacci number.
class FibonacciScriptAgent : public agent
{
public:
   FibonacciScriptAgent(IScriptControlPtr pScriptControl, ISource<LONG>& source)
      : _pScriptControl(pScriptControl)
      , _source(source) { }

public:
   // Retrieves the result code.
   HRESULT GetHRESULT() 
   {
      return receive(_result);
   }

protected:
   void run()
   {
      // Initialize the COM library on the current thread.
      CoInitializeEx(NULL, COINIT_MULTITHREADED);

      // Read values from the message buffer until 
      // we receive the sentinel value.      
      LONG lValue;
      while ((lValue = receive(_source)) != Sentinel)
      {
         try {
            // Call the helper function to run the script procedure.
            array<_variant_t, 1> args = { _variant_t(lValue) };
            _variant_t result = RunScriptProcedure(
               _pScriptControl, 
               _bstr_t("fib"), 
               args);
            
            // Print the result.
            wstringstream ss;         
            ss << L"fib(" << lValue << L") = " << result.lVal << endl;
            wcout << ss.str();
         }
         catch (HRESULT hr) {
            send(_result, hr);
            break;    
         }
      }

      // Set the result code (does nothing if a value is already set).
      send(_result, S_OK);

      // Free the COM library.
      CoUninitialize();

      // Set the agent to the finished state.
      done();
   }

public:
   // Signals the agent to terminate.
   static const LONG Sentinel = 0L;

private:
   // The IScriptControl object that contains the script procedure.
   IScriptControlPtr _pScriptControl;
   // Message buffer from which to read arguments to the 
   // script procedure.
   ISource<LONG>& _source;
   // The result code for the overall operation.
   single_assignment<HRESULT> _result;
};

// Computes multiple Fibonacci numbers in parallel by using 
// asynchronous agents.
HRESULT AgentFibonacci(IScriptControlPtr pScriptControl)
{
   // Message buffer to hold arguments to the script procedure.
   unbounded_buffer<LONG> values;

   // Create several agents.
   array<agent*, 3> agents = 
   {
      new FibonacciScriptAgent(pScriptControl, values),
      new FibonacciScriptAgent(pScriptControl, values),
      new FibonacciScriptAgent(pScriptControl, values),
   };

   // Start each agent.
   for_each(begin(agents), end(agents), [](agent* a) {
      a->start();
   });

   // Send a few values to the agents.
   send(values, 30L);
   send(values, 22L);
   send(values, 10L);
   send(values, 12L);
   // Send a sentinel value to each agent.
   for_each(begin(agents), end(agents), [&values](agent*) {
      send(values, FibonacciScriptAgent::Sentinel);
   });

   // Wait for all agents to finish.
   agent::wait_for_all(3, &agents[0]);

   // Determine the result code.
   HRESULT hr = S_OK;
   for_each(begin(agents), end(agents), [&hr](agent* a) {
      HRESULT hrTemp;
      if (FAILED(hrTemp = 
         reinterpret_cast<FibonacciScriptAgent*>(a)->GetHRESULT()))
      {
         hr = hrTemp;
      }
   });

   // Clean up.
   for_each(begin(agents), end(agents), [](agent* a) {
      delete a;
   });

   return hr;
}

int wmain()
{
   HRESULT hr;

   // Enable COM on this thread for the lifetime of the program.   
   CCoInitializer coinit(COINIT_MULTITHREADED);
     
   // Create the script control.
   IScriptControlPtr pScriptControl(__uuidof(ScriptControl));
   
   // Set script control properties.
   pScriptControl->Language = "JScript";
   pScriptControl->AllowUI = TRUE;

   // Add script code that computes the nth Fibonacci number.
   hr = pScriptControl->AddCode(
      "function fib(n) { if (n<2) return n; else return fib(n-1) + fib(n-2); }" );
   if (FAILED(hr))
      return hr;

   // Test the script control by computing the 15th Fibonacci number.
   wcout << L"Main Thread:" << endl;
   long n = 15;
   array<_variant_t, 1> args = { _variant_t(n) };
   _variant_t result = RunScriptProcedure(
      pScriptControl, 
      _bstr_t("fib"), 
      args);
   // Print the result.
   wcout << L"fib(" << n << L") = " << result.lVal << endl;

   // Use the parallel_for algorithm to compute multiple 
   // Fibonacci numbers in parallel.
   wcout << endl << L"Parallel Fibonacci:" << endl;
   if (FAILED(hr = ParallelFibonacci(pScriptControl)))
      return hr;

   // Use asynchronous agents to compute multiple 
   // Fibonacci numbers in parallel.
   wcout << endl << L"Agent Fibonacci:" << endl;
   if (FAILED(hr = AgentFibonacci(pScriptControl)))
      return hr;

   return S_OK;
}

此範例會產生下列範例輸出。

Main Thread:
fib(15) = 610

Parallel Fibonacci:
fib(15) = 610
fib(10) = 55
fib(16) = 987
fib(18) = 2584
fib(11) = 89
fib(17) = 1597
fib(19) = 4181
fib(12) = 144
fib(13) = 233
fib(14) = 377

Agent Fibonacci:
fib(30) = 832040
fib(22) = 17711
fib(10) = 55
fib(12) = 144

編譯程式碼

複製範例程式碼，並將其貼到 Visual Studio 專案中，或貼到名為 parallel-scripts.cpp 的檔案中，然後在 Visual Studio 命令提示字元視窗中執行下列命令。

cl.exe /EHsc parallel-scripts.cpp /link ole32.lib

另請參閱

並行執行階段逐步解說
工作平行處理原則
平行演算法
非同步代理程式
例外狀況處理
PPL 中的取消
工作排程器