使用 IRow::GetColumns 提取資料行 (OLE DB)
適用於:SQL Server
Azure SQL 資料庫 Azure SQL 受控執行個體
Azure Synapse Analytics
Platform System (PDW)
IRow 介面允許直接存取結果集中單一資料列的資料行。 因此,IRow 是從包含一個資料列之結果集擷取資料行的有效方式。
您可取得程式碼範例,該範例會示範如何使用 IRow 來擷取單一資料列。 在此範例中,系統會從資料列一次擷取一個資料行。 此範例會示範:
如何提取資料行的群組 (依序)。
如何存取兩次資料行。 第一次會先取得實際的資料行寬度,然後再存取實際的資料。 在 DBCOLUMNACCESS 結構中,若 pData 為 NULL,cbMaxLen 為 0,則呼叫 IRow->GetColumns() 時,將只會傳回實際的資料行長度。 此時,只要對相同的資料行,再次呼叫 IRow->GetColumns(),就能擷取實際的資料。
重要
盡可能使用 Windows 驗證。 如果無法使用 Windows 驗證,請提示使用者在執行階段輸入認證。 請避免將認證儲存在檔案中。 如果您必須保存認證,則應該用 Win32 crypto API 加密這些認證。
使用 IRow::GetColumns 提取資料行
建立資料來源的連接。
執行命令 (在下列範例中,ICommandExecute::Execute() 是使用 IID_IRow 呼叫的)。
執行 IRow::GetColumns() 來提取所產生之資料列中的一或多個資料行。 如果您要在提取資料前尋找實際的資料行大小,將 DBCOLUMNACCESS 中的 pData 設定為 NULL。 IRow::GetColumns() 的呼叫僅會傳回資料行寬度。 IRow::GetColumns() 的另一個呼叫將會提取資料。
執行 IRow::GetColumns(),直到存取所需的所有資料行為止。 資料行必須依序進行存取。
範例
此範例顯示如何使用 IRow 介面,允許直接存取結果集中單一資料列的資料行。 此範例會示範:
如何依序提取資料行的群組。
如何存取資料行兩次:第一次會先取得實際的資料行寬度,然後再存取實際的資料。
在 DBCOLUMNACCESS 結構中,若 pData 為 NULL,cbMaxLen 為 0,則呼叫 IRow>GetColumns 時,將只會傳回實際的資料行長度。 此時,只要對相同的資料行,再次呼叫 IRow->GetColumns,就能擷取實際的資料。 IA64 不支援此範例。
本文中的 Transact-SQL 程式代碼範例會使用 AdventureWorks2022
或 AdventureWorksDW2022
範例資料庫,您可以從 Microsoft SQL Server 範例和社群專案首頁下載。
第一個 (Transact-SQL) 程式碼清單會建立此範例所使用的資料表。
使用 ole32.lib oleaut32.lib 編譯並執行第二個 (C++) 程式碼清單。 此應用程式會連線至電腦的預設 SQL Server 執行個體。 在某些 Windows 作業系統上,您必須將 (localhost) 或 (local) 變更為 SQL Server 執行個體的名稱。 若要連線到具名執行個體,請將連接字串從 L"(local)" 變更為 L"(local)\\name",其中 name 是具名執行個體。 根據預設,SQL Server Express 會安裝至具名執行個體。 請確認您的 INCLUDE 環境變數包含的目錄內含 msoledbsql.h。
第三個 (Transact-SQL) 程式碼清單會刪除此範例所使用的資料表。
use AdventureWorks2022;
go
if exists (select name from sysobjects where name = 'MyTable')
drop table MyTable
go
create table MyTable
(
col1 int,
col2 varchar(50),
col3 char(50),
col4 datetime,
col5 float,
col6 money,
col7 sql_variant,
col8 binary(50),
col9 text,
col10 image
)
go
insert into MyTable
values
(
10,
'abcdefghijklmnopqrstuvwxyz',
'ABCDEFGHIJKLMNOPQRSTUVWXYZ',
'11/1/1999 11:52 AM',
3.14,
99.95,
convert(nchar(50), N'AbCdEfGhIjKlMnOpQrStUvWxYz'),
0x123456789,
replicate('AAAAABBBBB', 500),
replicate(0x123456789, 500)
)
Go
// compile with: ole32.lib oleaut32.lib
#define DBINITCONSTANTS
#define OLEDBVER 0x0250 // to include correct interfaces
#include <stdio.h>
#include <windows.h>
#include <iostream>
#include <oledb.h>
#include <msoledbsql.h>
using namespace std;
int InitializeAndEstablishConnection();
HRESULT GetColumnSize(IRow* pUnkRow, ULONG iCol);
ULONG PrintData(ULONG iCols, ULONG iStart, DBCOLUMNINFO* prgInfo, DBCOLUMNACCESS* prgColumns);
HRESULT GetColumns(IRow* pUnkRow, ULONG iStart, ULONG iEnd);
IDBInitialize* pIDBInitialize = NULL;
IDBProperties* pIDBProperties = NULL;
IDBCreateSession* pIDBCreateSession = NULL;
IDBCreateCommand* pIDBCreateCommand = NULL;
ICommandText* pICommandText = NULL;
IRow * pIRow = NULL;
DBCOLUMNINFO* pDBColumnInfo = NULL;
IAccessor* pIAccessor = NULL;
DBPROP InitProperties[4];
DBPROPSET rgInitPropSet[1];
ULONG i, j;
HRESULT hresult;
DBROWCOUNT cNumRows = 0;
ULONG lNumCols;
WCHAR* pStringsBuffer;
DBBINDING* pBindings;
ULONG ConsumerBufColOffset = 0;
HACCESSOR hAccessor;
ULONG lNumRowsRetrieved;
HROW hRows[10];
HROW* pRows = &hRows[0];
int main() {
ULONG iidx = 0;
WCHAR* wCmdString = OLESTR(" SELECT * FROM MyTable");
// Call a function to initialize and establish connection.
if (InitializeAndEstablishConnection() == -1) {
cout << "Failed to initialize and establish connection.\n";
// Insert your code for cleanup and error handling.
return -1;
}
// Create a session object.
if (FAILED(pIDBInitialize->QueryInterface (
IID_IDBCreateSession, (void**) &pIDBCreateSession))) {
cout << "Failed to obtain IDBCreateSession interface.\n";
// Insert your code for cleanup and error handling.
return -1;
}
if (FAILED(pIDBCreateSession->CreateSession( NULL, IID_IDBCreateCommand, (IUnknown**) &pIDBCreateCommand))) {
cout << "pIDBCreateSession->CreateSession failed.\n";
// Insert your code for cleanup and error handling.
return -1;
}
// Access the ICommandText interface.
if (FAILED(pIDBCreateCommand->CreateCommand( NULL, IID_ICommandText, (IUnknown**) &pICommandText))) {
cout << "Failed to access ICommand interface.\n";
// Insert your code for cleanup and error handling.
return -1;
}
// Use SetCommandText() to specify the command text.
if (FAILED(pICommandText->SetCommandText(DBGUID_DBSQL, wCmdString))) {
cout << "Failed to set command text.\n";
// Insert your code for cleanup and error handling.
return -1;
}
// Fetch columns 1-5 and then 6-10 and display the contents
if (FAILED(hresult = pICommandText->Execute(NULL, IID_IRow, NULL, &cNumRows, (IUnknown **) &pIRow))) {
cout << "Failed to execute command.\n";
// Insert your code for cleanup and error handling.
return -1;
}
hresult = GetColumns(pIRow, 1, 5);
hresult = GetColumns(pIRow, 6, 10);
hresult = pIRow->Release();
// Execute the command.
if (FAILED(hresult = pICommandText->Execute(NULL, IID_IRow, NULL, &cNumRows, (IUnknown **) &pIRow))) {
cout << "Failed to execute command.\n";
// Insert your code for cleanup and error handling.
return -1;
}
// Get columns
for ( iidx = 1 ; iidx <= 10 ; iidx++ ) {
if (FAILED(hresult = GetColumnSize(pIRow, iidx))) {
cout << "Failed to get column size.\n";
// Insert your code for cleanup and error handling.
return -1;
}
hresult = GetColumns(pIRow, iidx, iidx);
}
pIRow->Release();
// Release memory.
pICommandText->Release();
pIDBCreateCommand->Release();
pIDBCreateSession->Release();
if (FAILED(pIDBInitialize->Uninitialize())) {
// Uninitialize not required, but fails if an interface has not been released. Can be used for debugging.
cout << "Problem uninitializing.\n";
}
pIDBInitialize->Release();
// Release the COM library.
CoUninitialize();
return 0;
};
//--------------------------------------------------------------------
BOOL InitColumn(DBCOLUMNACCESS* pCol, DBCOLUMNINFO* pInfo) {
// If text or image column is being read,in which case the max possible length of a value is
// the column is hugh,we will limit that size to 512 bytes (for illustration purposes).
DBLENGTH ulSize = (pInfo->ulColumnSize < 0x7fffffff) ? pInfo->ulColumnSize : 512;
// Verify dta buffer is large enough.
if (pCol->cbMaxLen < (ulSize + 1)) {
if (pCol->pData) {
delete [] pCol->pData;
pCol->pData = NULL;
}
// Allocate data buffer
void * p = pCol->pData = new WCHAR[ulSize + 1];
if (!(p /* pCol->pData = new WCHAR[ulSize + 1] */ ))
return FALSE;
// set the max length of caller-initialized memory.
pCol->cbMaxLen = sizeof(WCHAR) * (ulSize + 1);
// In the above 2 steps, pData is pointing to memory (it is not NULL) and cbMaxLen has a value
// (not 0), so next call to IRow->GetData() will read the data from the column.
}
// Clear memory buffer
ZeroMemory((void*) pCol->pData, pCol->cbMaxLen);
// Set properties.
pCol->wType = DBTYPE_WSTR;
pCol->columnid = pInfo->columnid;
pCol->cbDataLen = 0;
pCol->dwStatus = 0;
pCol->dwReserved = 0;
pCol->bPrecision = 0;
pCol->bScale = 0;
return TRUE;
}
//--------------------------------------------------------------------
HRESULT GetColumns(IRow* pUnkRow, ULONG iStart, ULONG iEnd) {
// Start and end are same. Thus, get only one column.
HRESULT hr;
ULONG iidx; // loop counter
DBORDINAL cColumns; // Count of columns
ULONG cUserCols; // Count of user columns
DBCOLUMNINFO* prgInfo; // Column of info. array
OLECHAR* pColNames; // Array of column names
DBCOLUMNACCESS* prgColumns; // Ptr to column access structures array
DBCOLUMNINFO* pCurrInfo;
DBCOLUMNACCESS* pCurrCol;
IColumnsInfo* pIColumnsInfo = NULL;
// Initialize
cColumns = 0;
prgInfo = NULL;
pColNames = NULL;
prgColumns = NULL;
printf("Retrieving data\n");
// Get column info to build column access array
hr = pUnkRow->QueryInterface(IID_IColumnsInfo, (void**)&pIColumnsInfo);
if (FAILED(hr))
goto CLEANUP;
hr = pIColumnsInfo->GetColumnInfo(&cColumns, &prgInfo, &pColNames);
if (FAILED(hr))
goto CLEANUP;
printf("In GetColumns(), Columns= %d\n", cColumns);
// Determine no. of columns to retrieve. Since iEnd and iStart is same, this is redundent step.
// cUserCols will always be 1.
cUserCols = iEnd - iStart + 1;
// Walk list of columns and setup a DBCOLUMNACCESS structure
if (!(prgColumns= new DBCOLUMNACCESS[cUserCols])) { // cUserCols is only 1
hr = E_FAIL;
goto CLEANUP;
}
ZeroMemory((void*) prgColumns, sizeof(DBCOLUMNACCESS) * cUserCols);
for ( iidx = 0 ; iidx < cUserCols ; iidx++ ) {
pCurrInfo = prgInfo + iidx + iStart - 1;
pCurrCol = prgColumns + iidx;
// Here the values of DBCOLUMNACCESS elements is set (pData and cbMaxLen)Thus IRow->GetColumns()
// will return actual data.
if (InitColumn(pCurrCol, pCurrInfo) == FALSE)
goto CLEANUP;
}
hr = pUnkRow->GetColumns(cUserCols, prgColumns); // cUserCols = 1
if (FAILED(hr))
printf("Error occurred\n");
// Show data.
PrintData(cUserCols, iStart, prgInfo, prgColumns);
CLEANUP:
if (pIColumnsInfo)
pIColumnsInfo->Release();
if (prgColumns)
delete [] prgColumns;
return hr;
}
// This function returns the actual width of the data in the column (not the columnwidth in
// DBCOLUMNFO structure which is the width of the column)
HRESULT GetColumnSize(IRow* pUnkRow, ULONG iCol) {
HRESULT hr = NOERROR;
DBORDINAL cColumns = 0; // Count the columns
DBCOLUMNINFO* prgInfo; // Column info array
OLECHAR* pColNames;
DBCOLUMNACCESS column;
DBCOLUMNINFO* pCurrInfo;
IColumnsInfo* pIColumnsInfo = NULL;
// Initialize
prgInfo = NULL;
pColNames = NULL;
printf("Checking column size\n");
// Get column info to build column access array
hr = pUnkRow->QueryInterface(IID_IColumnsInfo, (void**) &pIColumnsInfo);
if (FAILED(hr))
goto CLEANUP;
hr = pIColumnsInfo->GetColumnInfo(&cColumns, &prgInfo, &pColNames);
if (FAILED(hr))
goto CLEANUP;
printf("Value of cColumns is %d\n", cColumns);
// Setup a DBCOLUMNACCESS structure: Here pData is set to NULL and cbMaxLen is set to 0. Thus
// IRow->GetColumns() returns only the actual column length in cbDataLen member of DBCOLUMNACCESS
// structure. In this case you can call IRow->GetColumns() again for the same column to retrieve
// actual data in the second call.
ZeroMemory((void*) &column, sizeof(DBCOLUMNACCESS));
column.pData = NULL;
pCurrInfo = prgInfo + iCol - 1;
// Get the column id in DBCOLUMNACCESS structure. It is then used in GetColumn().
column.columnid = pCurrInfo->columnid;
printf("column.columnid value is %d\n", column.columnid);
// We know which column to get. The column.columnid gives the column no.
hr = pUnkRow->GetColumns(1, &column);
if (FAILED(hr))
printf("Errors occurred\n");
// Show data
PrintData(1, iCol, prgInfo, &column);
CLEANUP:
if (pIColumnsInfo)
pIColumnsInfo->Release();
return hr;
}
BOOL GetStatus(DWORD dwStatus, WCHAR* pwszStatus) {
switch (dwStatus) {
case DBSTATUS_S_OK:
wcscpy_s(pwszStatus, 255, L"DBSTATUS_S_OK");
break;
case DBSTATUS_E_UNAVAILABLE:
wcscpy_s(pwszStatus, 255, L"DBSTATUS_E_UNAVAILABLE");
break;
case DBSTATUS_S_TRUNCATED:
wcscpy_s(pwszStatus, 255, L"DBSTATUS_S_TRUNCATED");
break;
}
return TRUE;
}
ULONG PrintData(ULONG iCols, ULONG iStart, DBCOLUMNINFO* prgInfo, DBCOLUMNACCESS* prgColumns) {
WCHAR wszStatus[255];
DBCOLUMNINFO* pCurrInfo;
DBCOLUMNACCESS* pCurrCol;
ULONG iidx;
printf("No. Name Status Length Max Data\n");
for ( iidx = 0 ; iidx < iCols ; iidx++ ) {
pCurrInfo = prgInfo + iidx + iStart - 1;
pCurrCol = prgColumns + iidx;
GetStatus(pCurrCol->dwStatus, wszStatus);
// was the data successfully retrieved?
wprintf(L"%-3d %-*s %-20s %-3d %-3d %-20s\n", iStart+iidx,
10,
pCurrInfo->pwszName,
wszStatus,
pCurrCol->cbDataLen,
pCurrCol->cbMaxLen,
(WCHAR*) pCurrCol->pData);
}
wprintf(L"\n");
return iidx;
}
int InitializeAndEstablishConnection() {
// Initialize the COM library.
CoInitialize(NULL);
// Obtain access to the MSOLEDBSQL provider.
hresult = CoCreateInstance(CLSID_MSOLEDBSQL,
NULL,
CLSCTX_INPROC_SERVER,
IID_IDBInitialize,
(void **) &pIDBInitialize);
if (FAILED(hresult)) {
printf("Failed to get IDBInitialize interface.\n");
// Insert your code for cleanup and error handling.
return -1;
}
// Initialize the property values needed to establish the connection.
for ( i = 0 ; i < 4 ; i++ )
VariantInit(&InitProperties[i].vValue);
// Server name.
InitProperties[0].dwPropertyID = DBPROP_INIT_DATASOURCE;
InitProperties[0].vValue.vt = VT_BSTR;
InitProperties[0].vValue.bstrVal= SysAllocString(L"(local)");
InitProperties[0].dwOptions = DBPROPOPTIONS_REQUIRED;
InitProperties[0].colid = DB_NULLID;
// Database.
InitProperties[1].dwPropertyID = DBPROP_INIT_CATALOG;
InitProperties[1].vValue.vt = VT_BSTR;
InitProperties[1].vValue.bstrVal= SysAllocString(L"AdventureWorks");
InitProperties[1].dwOptions = DBPROPOPTIONS_REQUIRED;
InitProperties[1].colid = DB_NULLID;
InitProperties[2].dwPropertyID = DBPROP_AUTH_INTEGRATED;
InitProperties[2].vValue.vt = VT_BSTR;
InitProperties[2].vValue.bstrVal= SysAllocString(L"SSPI");
InitProperties[2].dwOptions = DBPROPOPTIONS_REQUIRED;
InitProperties[2].colid = DB_NULLID;
// Now that the properties are set, construct the DBPROPSET structure (rgInitPropSet). The DBPROPSET
// structure is used to pass an array of DBPROP structures (InitProperties) to the SetProperties method.
rgInitPropSet[0].guidPropertySet= DBPROPSET_DBINIT;
rgInitPropSet[0].cProperties = 4;
rgInitPropSet[0].rgProperties = InitProperties;
// Set initialization properties.
hresult = pIDBInitialize->QueryInterface(IID_IDBProperties, (void **)&pIDBProperties);
if (FAILED(hresult)) {
cout << "Failed to get IDBProperties interface.\n";
// Insert your code for cleanup and error handling.
return -1;
}
hresult = pIDBProperties->SetProperties(1, rgInitPropSet);
if (FAILED(hresult)) {
cout << "Failed to set initialization properties.\n";
// Insert your code for cleanup and error handling.
return -1;
}
pIDBProperties->Release();
// Now establish the connection to the data source.
if (FAILED(pIDBInitialize->Initialize()))
cout << "Problem establishing connection to the data source.\n";
return 0;
}
use AdventureWorks2022;
go
if exists (select name from sysobjects where name = 'MyTable')
drop table MyTable
go