共用方式為

Setting a remote perfmon Windows Server 2012 style...

  • 發行項

Applies to:

Windows Server 2012 R2

Windows 8.1

Windows Server 2012

Windows 8

My old team had the following blog post Two Minute Drill: LOGMAN.EXE written for Windows Vista and Windows Server 2008 that goes over the “base”* performance counters.

With new perfmon counters to troubleshoot performance issues, I decided to write this post that shows you how to gather perfmon remotely on our newer Windows versions. 

Have the “Remote Registry” service started

Have the “Performance Logs and Alerts” unblocked in the Windows Firewall or your Antivirus Network Protection software.

From a 64-bit Windows Vista/Server 2008/7/Server 2008 R2/8/Server 2012/8.1/Server 2012 R2 ‘tools machine’:

Long-interval:

==========

Start, CMD (Run as admin)

logman.exe create counter %ComputerName%_long_interval -f bincirc -v mmddhhmm -max 350 -c "\Cache\*" "\IPv4\*" "\LogicalDisk(*)\*" "\Memory\*" "\Netlogon(*)\*" "\Network Interface(*)\*" "\Paging File(*)\*" "\Per Processor Network Activity Cycles(*)\*" "\Per Processor Network Interface Card Activity(*)\*" "\Processor(*)\*" "\Processor Information(*)\*" "\PhysicalDisk(*)\*" "\Process(*)\*" "\Physical Network Interface Card Activity(*)\*" "\Redirector\*" "\SMB Client Shares(*)\*" "\SMB Server Shares(*)\*" "\SMB Server Sessions(*)\*" "\Server\*" "\Server Work Queues(*)\*" "\System\*" "\TCPv4\*" -si 00:05:00 -s YourServerName -u DomainName\Username *

Note:  Where "YourServerName" is the actual server name.

Note 2:  Where "DomainName" is your actual domain name.

Note 3:  Where "Username" is a user account that has local admin rights on the target machine.

Note 5:  You could change the interval for the long from to -si 00:05:00 to anything depending on how long you want to capture.  For more info on the sample interval that you need to choose, check out:  How often should Perfmon Sample?

logman.exe start %ComputerName%_long_interval -s YourServerName -u DomainName\Username Password

<reproduce the issue>

logman.exe stop %ComputerName%_long_interval -s YourServerName -u DomainName\Username Password

Short-interval:

==========

logman.exe create counter %ComputerName%_short_interval -f bincirc -v mmddhhmm -max 350 -c "\Cache\*" "\IPv4\*" "\LogicalDisk(*)\*" "\Memory\*" "\Netlogon(*)\*" "\Network Interface(*)\*" "\Paging File(*)\*" "\Per Processor Network Activity Cycles(*)\*" "\Per Processor Network Interface Card Activity(*)\*" "\Processor(*)\*" "\Processor Information(*)\*" "\PhysicalDisk(*)\*" "\Process(*)\*" "\Physical Network Interface Card Activity(*)\*" "\Redirector\*" "\SMB Client Shares(*)\*" "\SMB Server Shares(*)\*" "\SMB Server Sessions(*)\*" "\Server\*" "\Server Work Queues(*)\*" "\System\*" "\TCPv4\*" -si 00:00:05 -s YourServerName -u DomainName\Username *

Note:  Where "YourServerName" is the actual server name.

Note 2:  Where "DomainName" is your actual domain name.

Note 3:  Where "Username" is a user account that has local admin rights on the target machine.

logman.exe start %ComputerName%_short_interval -s YourServerName -u DomainName\Username Password

<reproduce the issue>

logman.exe stop %ComputerName%_short_interval -s YourServerName -u DomainName\Username Password

More information:

*  If you use my colleague Clint Huffman’s Performance Analysis of Logs (PAL), the “base” performance is named “System Overview”.

Thanks for Roger Southgate for tech. reviewing.

Comments

  • Anonymous
    January 01, 2003
    The comment has been removed
  • Anonymous
    January 01, 2003
    I have created the counters with the instructions above however, I get the following message:
    Argument 'u' is not allowed with the other arguments specified.

    I have tried various combo's and I typed thew command in (no copy and paste).

    I like this article and I'd like to push counters out like this, but I'd also like to be able to start/stop them remotely also.

    Thanks,

    Lee
  • Anonymous
    February 25, 2015
    How did you resolve?
  • Anonymous
    March 21, 2015
    Applies to: Windows Server 2012 R2 Windows 8.1 Windows Server 2012 Windows 8 Windows Server 2008 R2 Windows
  • Anonymous
    March 22, 2015
    Applies to: Windows Threshold Server beta Windows Threshold (10) beta Windows Server 2012 R2 Windows
  • Anonymous
    March 22, 2015
      Applies to: Windows Threshold Server beta Windows Threshold (10) beta Windows Server 2012 R2 Windows
  • Anonymous
    May 16, 2015
    Applies to: Windows Server 2012 R2 Windows 8.1 Windows Server 2012 Windows 8.0 Windows Server 2008 R2
  • Anonymous
    May 16, 2015
    Applies to: Windows Server 2012 R2 Windows 8.1 Windows Server 2012 Windows 8 Windows Server 2008 R2 Windows
  • Anonymous
    May 16, 2015
    Applies to: Windows Server 2012 R2 Windows 8.1 Windows Server 2012 Windows 8 Windows Server 2008 R2 Windows
  • Anonymous
    May 16, 2015
    Hi all, There are at least three (3) methods of enabling a perfmon log using logman.   Method Description