SYSPRP Package installed for a user, but not provisioned for all users
Question
Thursday, March 16, 2017 7:59 PM
Hi,
I have a fresh install of Windows 10 Pro on a new VM which im using as a reference machine for imaging. After my installs and customizations, i tried SysPreping the machine using the OOBE and Generalize option, but im getting the following error:
2017-03-16 15:30:03, Error SYSPRP Package Facebook.Facebook_81.789.17803.0_x86__8xx8rvfyw5nnt was installed for a user, but not provisioned for all users. This package will not function properly in the sysprep image.
2017-03-16 15:30:03, Error SYSPRP Failed to remove apps for the current user: 0x80073cf2.
2017-03-16 15:30:03, Error SYSPRP Exit code of RemoveAllApps thread was 0x3cf2.
2017-03-16 15:30:03, Error [0x0f0082] SYSPRP ActionPlatform::LaunchModule: Failure occurred while executing 'SysprepGeneralizeValidate' from C:\Windows\System32\AppxSysprep.dll; dwRet = 0x3cf2
2017-03-16 15:30:03, Error SYSPRP SysprepSession::Validate: Error in validating actions from C:\Windows\System32\Sysprep\ActionFiles\Generalize.xml; dwRet = 0x3cf2
2017-03-16 15:30:03, Error SYSPRP RunPlatformActions:Failed while validating SysprepSession actions; dwRet = 0x3cf2
2017-03-16 15:30:03, Error [0x0f0070] SYSPRP RunExternalDlls:An error occurred while running registry sysprep DLLs, halting sysprep execution. dwRet = 0x3cf2
2017-03-16 15:30:03, Error [0x0f00d8] SYSPRP WinMain:Hit failure while pre-validate sysprep generalize internal providers; hr = 0x80073cf2
I followed KB Article 2769827. The article suggests locating the offending app, and remove it. In my case - as you can see from the above error - its complaining about "Facebook.Facebook_81.789.17803.0_x86__8xx8rvfyw5nnt". The only problem is, i dont have this app. If i try to remove it, it says "Package was not found" (see screenshot below). What else might be wrong?
All replies (22)
Friday, March 17, 2017 2:09 AM | 1 vote
Hi Joe,
Please confirm if your package full name is correct.
As the KB Article 2769827, run the following command to get the exact package name
Get-AppxPackage -AllUser | Format-List -Property PackageFullName,PackageUserInformation.
After that, run one of the following command to remove the package or provision package.
Run Remove-AppxPackage -Package <packagefullname>
Remove the provisioning by running the following cmdlet:
Remove-AppxProvisionedPackage -Online -PackageName <packagefullname>
Please remember to mark the replies as answers if they help.
If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.
Friday, March 17, 2017 6:58 PM
Hi Karen,
My apologies, but i forgot to mention. I ran the **Get-AppxPackage **command, but i did not see anything "Facebook". I only saw a list of Microsoft applications.
I ended up creating a new source VM which SysPrep'd w/o a problem. I dont know what the issue was. I had originally thought that I had caused it by removing the user under which i installed all apps (as well as the default0 user), and ran Sysprep using the Built-In Administrator. However, i duplicated this scenario on the new VM and i did not get any errors during the Sysprep process.
Friday, March 17, 2017 8:20 PM | 1 vote
If the VM has internet access, an application may have installed in the background. Why it doesn't show up with Get-AppxPackage is a puzzling.
Is the main account tied to any Microsoft Live accounts that the application could have been drawn in from?
Sean Liming - Book Author: Starter Guide Windows 10 IoT Enterprise - www.annabooks.com / www.seanliming.com
Thursday, May 18, 2017 12:44 PM
Hello,
the same problem with facebook app. Any solution?
Monday, May 22, 2017 12:57 PM | 9 votes
Hi
Open the PowerShell Command with Admin Rights. Excecute the follow command:
Get-AppxPackage|Remove-AppxPackage
At this point the system remove the Apps that cause the Problem. You receive also many Issuereports, but this in't a problem. After that you can capture whitout prolem yout Image.
Happy SCCM
Thursday, July 20, 2017 1:25 PM | 2 votes
Hi
Open the PowerShell Command with Admin Rights. Excecute the follow command:
Get-AppxPackage|Remove-AppxPackage
At this point the system remove the Apps that cause the Problem. You receive also many Issuereports, but this in't a problem. After that you can capture whitout prolem yout Image.
Happy SCCM
This has been plaguing me ever since I started using MDT to deploy Windows 10 about a year ago. Thank you! This worked for me. I had to run the command by logging into each user that I had set up prior to image capture. After running the command I was able to sysprep and capture. All that research I did and nothing I found mentioned such a simple command.
Monday, May 7, 2018 3:30 PM
This was extremely helpful. Thank you so much -
Wednesday, May 23, 2018 9:23 AM | 1 vote
Did you also get a lot of error codes while running this command?
Saturday, August 11, 2018 12:04 AM
Yes. I got lots of error messages, but it worked regardless. I'd been demoralized by this problem for more than a year now. Running this Powershell command from each of the locally staged users (as an admin) fixed the issue completely for me. THANK YOU.
Wednesday, November 28, 2018 12:25 AM | 1 vote
Hi all
i tried this but it still says:
SYSPRP Package Microsoft.BingWeather_4.24.11294.0_x64__8wekyb3d8bbwe was installed for a user, but not provisioned for all users. This package will not function properly in the sysprep image.
SYSPRP Failed to remove apps for the current user: 0x80073cf2.
but when i want to remove it with this:
Remove-AppxPackage -Package Microsoft.BingWeather_4.24.11294.0_x64__8wekyb3d8bbwe
and
Remove-AppxProvisionedPackage -Online -PackageName Microsoft.BingWeather_4.24.11294.0_x64__8wekyb3d8bbwe
it cant find it.. like it does not exist.. but the error message does ^^
is there any other solution?
thx in advance
Daniel
Wednesday, November 28, 2018 6:17 PM
This might be silly but did you reset your computer after you ran the original removal command? Also post the error. I think I ran into something where it said it was not found OR it could not be removed and in that case had to use a different method to remove it so it's good to have the entire error message.
Thursday, November 29, 2018 10:13 AM
hi thx for replying
yes i reset the virtual machine numerous times.
the first error while i try to sysprep ist this:
2018-11-29 10:57:17, Info SYSPRP ========================================================
2018-11-29 10:57:17, Info SYSPRP === Beginning of a new sysprep run ===
2018-11-29 10:57:17, Info SYSPRP ========================================================
2018-11-29 10:57:17, Info [0x0f004d] SYSPRP The time is now 2018-11-29 10:57:17
2018-11-29 10:57:17, Info [0x0f004e] SYSPRP Initialized SysPrep log at C:\Windows\System32\Sysprep\Panther
2018-11-29 10:57:17, Info [0x0f0054] SYSPRP ValidatePrivileges:User has required privileges to sysprep machine
2018-11-29 10:57:17, Info [0x0f007e] SYSPRP FCreateTagFile:Tag file C:\Windows\System32\Sysprep\Sysprep_succeeded.tag does not already exist, no need to delete anything
2018-11-29 10:57:17, Info [0x0f003d] SYSPRP WinMain:Displaying dialog box for user to choose sysprep mode...
2018-11-29 10:57:21, Info [0x0f00d7] SYSPRP WinMain:Pre-validing 'cleanup' internal providers.
2018-11-29 10:57:21, Info SYSPRP RunExternalDlls:Running platform actions specified in action file for phase 3
2018-11-29 10:57:21, Info SYSPRP SysprepSession::CreateSession: Successfully created instance with action file C:\Windows\System32\Sysprep\ActionFiles\Cleanup.xml, and mode <null>
2018-11-29 10:57:21, Info SYSPRP SysprepSession::Validate: Beginning action execution from C:\Windows\System32\Sysprep\ActionFiles\Cleanup.xml
2018-11-29 10:57:21, Info SYSPRP SysprepSession::CreateXPathForSelection: Sysprep mode in registry is <null>
2018-11-29 10:57:21, Info SYSPRP SysprepSession::CreateXPathForSelection: Processor architecture in registry is AMD64
2018-11-29 10:57:21, Info SYSPRP ActionPlatform::LaunchModule: Executing method 'Sysprep_Clean_Validate_Opk' from C:\Windows\System32\spopk.dll
2018-11-29 10:57:21, Info SYSPRP ActionPlatform::LaunchModule: Successfully executed 'Sysprep_Clean_Validate_Opk' from C:\Windows\System32\spopk.dll without error
2018-11-29 10:57:21, Info [0x0f00d7] SYSPRP WinMain:Pre-validing 'generalize' internal providers.
2018-11-29 10:57:21, Info SYSPRP RunExternalDlls:Running platform actions specified in action file for phase 1
2018-11-29 10:57:21, Info SYSPRP SysprepSession::CreateSession: Successfully created instance with action file C:\Windows\System32\Sysprep\ActionFiles\Generalize.xml, and mode <null>
2018-11-29 10:57:21, Info SYSPRP SysprepSession::Validate: Beginning action execution from C:\Windows\System32\Sysprep\ActionFiles\Generalize.xml
2018-11-29 10:57:21, Info SYSPRP SysprepSession::CreateXPathForSelection: Sysprep mode in registry is <null>
2018-11-29 10:57:21, Info SYSPRP SysprepSession::CreateXPathForSelection: Processor architecture in registry is AMD64
2018-11-29 10:57:21, Info SYSPRP ActionPlatform::LaunchModule: Executing method 'SysprepGeneralizeValidate' from C:\Windows\System32\AppxSysprep.dll
2018-11-29 10:57:21, Info SYSPRP Entering SysprepGeneralizeValidate (Appx) - validating whether all apps are also provisioned.
2018-11-29 10:57:21, Error SYSPRP Package Microsoft.BingWeather_4.24.11294.0_x64__8wekyb3d8bbwe was installed for a user, but not provisioned for all users. This package will not function properly in the sysprep image.
2018-11-29 10:57:21, Error SYSPRP Failed to remove apps for the current user: 0x80073cf2.
2018-11-29 10:57:21, Error SYSPRP Exit code of RemoveAllApps thread was 0x3cf2.
2018-11-29 10:57:21, Error SYSPRP ActionPlatform::LaunchModule: Failure occurred while executing 'SysprepGeneralizeValidate' from C:\Windows\System32\AppxSysprep.dll; dwRet = 0x3cf2
2018-11-29 10:57:21, Error SYSPRP SysprepSession::Validate: Error in validating actions from C:\Windows\System32\Sysprep\ActionFiles\Generalize.xml; dwRet = 0x3cf2
2018-11-29 10:57:21, Error SYSPRP RunPlatformActions:Failed while validating Sysprep session actions; dwRet = 0x3cf2
2018-11-29 10:57:21, Error [0x0f0070] SYSPRP RunExternalDlls:An error occurred while running registry sysprep DLLs, halting sysprep execution. dwRet = 0x3cf2
2018-11-29 10:57:21, Error [0x0f00d8] SYSPRP WinMain:Hit failure while pre-validate sysprep generalize internal providers; hr = 0x80073cf2
2018-11-29 10:57:25, Info [0x0f0052] SYSPRP Shutting down SysPrep log
2018-11-29 10:57:25, Info [0x0f004d] SYSPRP The time is now 2018-11-29 10:57:25
2018-11-29 10:57:40, Info SYSPRP ========================================================
2018-11-29 10:57:40, Info SYSPRP === Beginning of a new sysprep run ===
2018-11-29 10:57:40, Info SYSPRP ========================================================
2018-11-29 10:57:40, Info [0x0f004d] SYSPRP The time is now 2018-11-29 10:57:40
2018-11-29 10:57:40, Info [0x0f004e] SYSPRP Initialized SysPrep log at C:\Windows\System32\Sysprep\Panther
2018-11-29 10:57:40, Info [0x0f0054] SYSPRP ValidatePrivileges:User has required privileges to sysprep machine
2018-11-29 10:57:40, Info [0x0f007e] SYSPRP FCreateTagFile:Tag file C:\Windows\System32\Sysprep\Sysprep_succeeded.tag does not already exist, no need to delete anything
2018-11-29 10:57:40, Info [0x0f003d] SYSPRP WinMain:Displaying dialog box for user to choose sysprep mode...
2018-11-29 10:57:43, Info [0x0f00d7] SYSPRP WinMain:Pre-validing 'cleanup' internal providers.
2018-11-29 10:57:43, Info SYSPRP RunExternalDlls:Running platform actions specified in action file for phase 3
2018-11-29 10:57:43, Info SYSPRP SysprepSession::CreateSession: Successfully created instance with action file C:\Windows\System32\Sysprep\ActionFiles\Cleanup.xml, and mode <null>
2018-11-29 10:57:43, Info SYSPRP SysprepSession::Validate: Beginning action execution from C:\Windows\System32\Sysprep\ActionFiles\Cleanup.xml
2018-11-29 10:57:43, Info SYSPRP SysprepSession::CreateXPathForSelection: Sysprep mode in registry is <null>
2018-11-29 10:57:43, Info SYSPRP SysprepSession::CreateXPathForSelection: Processor architecture in registry is AMD64
2018-11-29 10:57:43, Info SYSPRP ActionPlatform::LaunchModule: Executing method 'Sysprep_Clean_Validate_Opk' from C:\Windows\System32\spopk.dll
2018-11-29 10:57:43, Info SYSPRP ActionPlatform::LaunchModule: Successfully executed 'Sysprep_Clean_Validate_Opk' from C:\Windows\System32\spopk.dll without error
2018-11-29 10:57:43, Info [0x0f00d7] SYSPRP WinMain:Pre-validing 'generalize' internal providers.
2018-11-29 10:57:43, Info SYSPRP RunExternalDlls:Running platform actions specified in action file for phase 1
2018-11-29 10:57:43, Info SYSPRP SysprepSession::CreateSession: Successfully created instance with action file C:\Windows\System32\Sysprep\ActionFiles\Generalize.xml, and mode <null>
2018-11-29 10:57:43, Info SYSPRP SysprepSession::Validate: Beginning action execution from C:\Windows\System32\Sysprep\ActionFiles\Generalize.xml
2018-11-29 10:57:43, Info SYSPRP SysprepSession::CreateXPathForSelection: Sysprep mode in registry is <null>
2018-11-29 10:57:43, Info SYSPRP SysprepSession::CreateXPathForSelection: Processor architecture in registry is AMD64
2018-11-29 10:57:43, Info SYSPRP ActionPlatform::LaunchModule: Executing method 'SysprepGeneralizeValidate' from C:\Windows\System32\AppxSysprep.dll
2018-11-29 10:57:43, Info SYSPRP Entering SysprepGeneralizeValidate (Appx) - validating whether all apps are also provisioned.
2018-11-29 10:57:43, Error SYSPRP Package Microsoft.BingWeather_4.24.11294.0_x64__8wekyb3d8bbwe was installed for a user, but not provisioned for all users. This package will not function properly in the sysprep image.
2018-11-29 10:57:43, Error SYSPRP Failed to remove apps for the current user: 0x80073cf2.
2018-11-29 10:57:43, Error SYSPRP Exit code of RemoveAllApps thread was 0x3cf2.
2018-11-29 10:57:43, Error SYSPRP ActionPlatform::LaunchModule: Failure occurred while executing 'SysprepGeneralizeValidate' from C:\Windows\System32\AppxSysprep.dll; dwRet = 0x3cf2
2018-11-29 10:57:43, Error SYSPRP SysprepSession::Validate: Error in validating actions from C:\Windows\System32\Sysprep\ActionFiles\Generalize.xml; dwRet = 0x3cf2
2018-11-29 10:57:43, Error SYSPRP RunPlatformActions:Failed while validating Sysprep session actions; dwRet = 0x3cf2
2018-11-29 10:57:43, Error [0x0f0070] SYSPRP RunExternalDlls:An error occurred while running registry sysprep DLLs, halting sysprep execution. dwRet = 0x3cf2
2018-11-29 10:57:43, Error [0x0f00d8] SYSPRP WinMain:Hit failure while pre-validate sysprep generalize internal providers; hr = 0x80073cf2
2018-11-29 10:57:47, Info [0x0f0052] SYSPRP Shutting down SysPrep log
2018-11-29 10:57:47, Info [0x0f004d] SYSPRP The time is now 2018-11-29 10:57:47
then i try to remove the mentioned "Microsoft.BingWeather_4.24.11294.0_x64__8wekyb3d8bbwe":
Remove-AppxPackage -Package Microsoft.BingWeather_4.24.11294.0_x64__8wekyb3d8bbwe
and get the following error: (translation: Packet can not be found)
Remove-AppxPackage : Fehler bei Bereitstellung. HRESULT: 0x80073CF1, Das Paket wurde nicht gefunden.
Microsoft.BingWeather_4.24.11294.0_x64__8wekyb3d8bbwe kann nicht entfernt werden, da der aktuelle Benutzer dieses
Paket nicht installiert hat. Verwenden Sie Get-AppxPackage, um die Liste der installierten Pakete anzuzeigen.
HINWEIS: Wenn Sie weitere Informationen wünschen, suchen Sie im Ereignisprotokoll nach "[ActivityId]
cff91f17-87c9-0001-a627-f9cfc987d401", oder verwenden Sie die Befehlszeile "Get-AppxLog -ActivityID
cff91f17-87c9-0001-a627-f9cfc987d401".
In Zeile:1 Zeichen:1
+ Remove-AppxPackage -Package Microsoft.BingWeather_4.24.11294.0_x64__8 ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (Microsoft.BingW...__8wekyb3d8bbwe:String) [Remove-AppxPackage], PSInval
idOperationException
+ FullyQualifiedErrorId : DeploymentError,Microsoft.Windows.Appx.PackageManager.Commands.RemoveAppxPackageCommand
then i do this: Get-AppxLog -ActivityID cff91f17-87c9-0001-a627-f9cfc987d401 and get this: (basically saying the packet can not be removed because id does not exist)
Time ID Message
--
29.11.2018 11:03:48 603 Der Bereitstellungsvorgang Remove wurde für ein Paket mit dem Hauptparameter Microsoft.BingWeather_4.24.11294.0_x64__8wekyb3d8bbwe und den Optionen 0
und 0 gestartet. Weitere Informationen zum Diagnostizieren von Problemen bei der Bereitstellung von Apps finden Sie unter
http://go.microsoft.com/fwlink/?LinkId=235160.
29.11.2018 11:03:48 10002 Die Resilienzdatei
"C:\ProgramData\Microsoft\Windows\AppRepository\2f892ff2-c0bf-4a5c-b80b-9e8919a58234_S-1-5-21-241893589-1895811160-4262146313-1008_1.rslc" wird für den
Vorgang "Remove" im Paket "Microsoft.BingWeather_4.24.11294.0_x64__8wekyb3d8bbwe" erstellt.
29.11.2018 11:03:48 607 Der Bereitstellungsvorgang Remove für das Paket Microsoft.BingWeather_4.24.11294.0_x64__8wekyb3d8bbwe wurde aus der Warteschlange entfernt und wird für
die Benutzer-SID S-1-5-21-241893589-1895811160-4262146313-1008 ausgeführt.
29.11.2018 11:03:48 702 Microsoft.BingWeather_4.24.11294.0_x64__8wekyb3d8bbwe kann nicht entfernt werden, da der aktuelle Benutzer dieses Paket nicht installiert hat.
Verwenden Sie Get-AppxPackage, um die Liste der installierten Pakete anzuzeigen.
29.11.2018 11:03:48 605 Der letzte erfolgreiche Status war BundleProcessed. Vor dem Erreichen des Folgestatus (Indexed) ist ein Fehler aufgetreten. Std.: 0x80073CF1
29.11.2018 11:03:49 401 Der Bereitstellungsvorgang "Remove" mit Zielvolume "C:" für das Paket "Microsoft.BingWeather_4.24.11294.0_x64__8wekyb3d8bbwe" von " " ist mit dem
Fehler 0x80073CF1 fehlgeschlagen. Weitere Informationen zum Diagnostizieren von Problemen bei der Bereitstellung von Apps finden Sie unter
"http://go.microsoft.com/fwlink/?LinkId=235160".
29.11.2018 11:03:49 404 Fehler "0x80073CF1" beim AppX Deployment-Vorgang für Paket "Microsoft.BingWeather_4.24.11294.0_x64__8wekyb3d8bbwe". Der Fehlertext lautet:
Microsoft.BingWeather_4.24.11294.0_x64__8wekyb3d8bbwe kann nicht entfernt werden, da der aktuelle Benutzer dieses Paket nicht installiert hat.
Verwenden Sie Get-AppxPackage, um die Liste der installierten Pakete anzuzeigen.
this command did not help either: Get-AppxPackage|Remove-AppxPackage
same errors
till now i always set up a new vm and installed win10 completely new and or go back to a previous version of the vm, but that does not work everytime.
thx in advance!
Daniel
Friday, November 30, 2018 6:34 PM
I can't read the second two logs as they are not in English but from what I keep seeing everyone is saying you can avoid this issue by running sysprep with no internet access on the VM. I would give that a try unless you are doing something like trying to capture the image to a SCCM server through a Task Sequence or something. It's kind of crazy that the help forums are flooded with this issue and MS gave one fix that works about 60% of the time and just left all others out to dry here. Let me know if trying to sysprep with no internet access works.
Saturday, December 1, 2018 1:17 AM
hi
yes i read that some time ago and had the network adapter disabled, but it did not help.
we have now created a snapshot to which we can always return when the problem occurs again.
a fixit from MS would be great ;)
thx anyway
Sunday, December 2, 2018 9:59 PM
hi all
little update:
if you disable the network adapter FROM THE BEGINNING and install windows updates wie WSUSOffline, no Metro Apps are being loaded in the background and Sysprep works ..most of the time.
had one "serious error blabla" but no more metro app provisioning errors ..so far
greetings
Daniel
Thursday, December 27, 2018 4:31 PM
I am unable to run sysprep because of the HolographicFirstRun fails to uninstall, I ran the Get-appx command and I found this...
PS C:\WINDOWS\system32> Get-AppxPackage -AllUser | Format-List -Property PackageFullName,PackageUserInformation
PackageFullName : Microsoft.Windows.HolographicFirstRun_10.0.17134.1_neutral_neutral_cw5n1h4txyewy
PackageUserInformation : {S-1-5-21-3148337210-2675398615-958385920-1001
*** [S-1-5-21-3148337210-2675398615-958385920-1001]: Installed(pending removal)}***
I have tried to remove the apppackage by itself, i have run the removal all command, I have even tried to add the package back but none seem to be able to find and/or fix it. Since i am unable to add images i am just adding the text from powershell.
PS C:\WINDOWS\system32> Remove-AppxPackage -Package Microsoft.Windows.HolographicFirstRun_10.0.17134.1_neutral_neutral_cw5n1h4txyewy
Remove-AppxPackage : Deployment failed with HRESULT: 0x80073CFA, Removal failed. Please contact your software vendor.
(Exception from HRESULT: 0x80073CFA)
error 0x80070032: AppX Deployment Remove operation on package
Microsoft.Windows.HolographicFirstRun_10.0.17134.1_neutral_neutral_cw5n1h4txyewy from:
C:\Windows\SystemApps\Microsoft.Windows.HolographicFirstRun_cw5n1h4txyewy failed. This app is part of Windows and
cannot be uninstalled on a per-user basis. An administrator can attempt to remove the app from the computer using Turn
Windows Features on or off. However, it may not be possible to uninstall the app.
NOTE: For additional information, look for [ActivityId] d92f013c-9d47-0007-ad06-2fd9479dd401 in the Event Log or use
the command line Get-AppPackageLog -ActivityID d92f013c-9d47-0007-ad06-2fd9479dd401
At line:1 char:1
+ Remove-AppxPackage -Package Microsoft.Windows.HolographicFirstRun_10. ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* + CategoryInfo : WriteError: (Microsoft.Windo...l_cw5n1h4txyewy:String) [Remove-AppxPackage], IOException*
* + FullyQualifiedErrorId : DeploymentError,Microsoft.Windows.Appx.PackageManager.Commands.RemoveAppxPackageCommand*
PS C:\WINDOWS\system32> add-AppxPackage -Package Microsoft.Windows.HolographicFirstRun_10.0.17134.1_neutral_neutral_cw5n1h4txyewy
Add-AppxPackage : A parameter cannot be found that matches parameter name 'Package'.
At line:1 char:17
- add-AppxPackage -Package Microsoft.Windows.HolographicFirstRun_10.0.1 ...
+ ~~~~~~~~
+ CategoryInfo : InvalidArgument: (:) [Add-AppxPackage], ParameterBindingException
+ FullyQualifiedErrorId : NamedParameterNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageComm
and
Tuesday, April 9, 2019 12:19 PM | 1 vote
Run in the same problem, i was sysprep for a deployment image and the error was similar.
The resolution was to install OS from stick without network connection, made a user at install as windows wizard request but the first thing to do after, is to enable the administrator account, logoff and logon as administrator and delete the other user account and profile. Only after that you can connect to internet and install whatever you may want! And sysprep will run without errors this time! (just because it will be no packets installed under other user)
Thursday, May 30, 2019 1:46 PM
Consegui executar o Sysprep mantendo a minha VM de referência totalmente sem conexão com a rede. Assim deu certo!
Monday, September 30, 2019 2:15 PM
I had a similar issue. One minor difference was that I had to run
Remove-AppxPackage -Package <packagefullname> -Allusers
The package had been installed under a different users profile on the machine.
Charles Herrington
Monday, October 7, 2019 1:58 PM
Found these posts after banging my head up against the wall all weekend.
My scenario.
Deployed Vanilla image via MDT. Had MDT create another User Account.
Did all my configurations using built-in Admin account for the reference image.
Tried to sysprep, no go.
Couldn't figure it out either. Same errors as posted. Never occurred to me that an account that had never been used would be the issue. Logged into other account, Windows initialized it for first time. I ran Get-AppxPackage | Remove-AppxPackage. Fixed the issue.
Thank you Gentlemen. Sanity partially restored.
Monday, November 4, 2019 3:47 PM
this fixes issues? but in my case it bring more issues. this breaks the Calculator app for my finance department it's a big no, no, not sure what else it breaks... isn't there a line to just provision the package to all users? in my case it's the BingNews..
Wednesday, February 19, 2020 9:32 AM
Login as builtin Administrator
Press Windows logo+Pause Break keys, then click Advanced System Settings in the left pane.
Or by pressing Win+R to open Run dialog, type control sysdm.cpl in the field and click OK.
Step 2: In System Properties window, select Advanced tab, and click Settings under User Profiles.
Delete all profiles except local administrator.
Try Sysprep again