microsoft.network/vpngateways 支援的計量
下表列出 microsoft.network/vpngateways 資源類型的可用計量。
表格標題
計量 - 在 Azure 入口網站 中顯示的計量顯示名稱。
Rest API 中的名稱 - REST API 中稱為的計量名稱。
單位 - 測量單位。
匯總 - 預設 匯總 類型。 有效值:Average、Minimum、Maximum、Total、Count。
尺寸 - 計量可用的維度。
時間粒紋 - 取樣計量的間隔。 例如, PT1M
表示計量會每分鐘取樣一次、每 30 分鐘、 PT30M
PT1H
每小時取樣一次等等。
DS 匯出 - 計量是否可透過診斷設定導出至 Azure 監視器記錄。 如需匯出計量的資訊,請參閱 在 Azure 監視器中建立診斷設定。
如需計量保留的相關信息,請參閱 Azure 監視器計量概觀。
如需支持的記錄清單,請參閱 支援的記錄類別 - microsoft.network/vpngateways
類別 | 計量 | REST API 中的名稱 | 單位 | 彙總 | 維度 | 時間粒紋 | DS 匯出 |
---|---|---|---|---|---|---|---|
交通流量 | 閘道 S2S 頻寬 閘道的站對站頻寬 (以位元組/秒為單位) |
AverageBandwidth |
每秒位元組 | Average | Instance |
PT5M、PT15M、PT30M、PT1H、PT6H、PT12H、P1D | Yes |
路由 | BGP 對等互連狀態 BGP 對等體的狀態 |
BgpPeerStatus |
Count | Average | BgpPeerAddress , Instance |
PT5M、PT15M、PT30M、PT1H、PT6H、PT12H、P1D | No |
路由 | 已公告的 BGP 路由 透過通道公告的 BGP 路由計數 |
BgpRoutesAdvertised |
Count | 總計 | BgpPeerAddress , Instance |
PT5M、PT15M、PT30M、PT1H、PT6H、PT12H、P1D | Yes |
路由 | 已獲知的 BGP 路由 透過通道獲知的 BGP 路由計數 |
BgpRoutesLearned |
Count | 總計 | BgpPeerAddress , Instance |
PT5M、PT15M、PT30M、PT1H、PT6H、PT12H、P1D | Yes |
交通流量 | 閘道輸入流程 輸入 VPN 閘道的 5 元組流程數目 |
InboundFlowsCount |
Count | 最大值、最小值 | Instance |
PT5M、PT15M、PT30M、PT1H、PT6H、PT12H、P1D | Yes |
Ipsec | 通道 MMSA 計數 MMSA 計數 |
MmsaCount |
Count | 總計 | ConnectionName , RemoteIP , Instance |
PT5M、PT15M、PT30M、PT1H、PT6H、PT12H、P1D | Yes |
交通流量 | 閘道輸出流程 結束 VPN 閘道的 5 個 Tuple 流程數目 |
OutboundFlowsCount |
Count | 最大值、最小值 | Instance |
PT5M、PT15M、PT30M、PT1H、PT6H、PT12H、P1D | Yes |
Ipsec | 通道 QMSA 計數 QMSA 計數 |
QmsaCount |
Count | 總計 | ConnectionName , RemoteIP , Instance |
PT5M、PT15M、PT30M、PT1H、PT6H、PT12H、P1D | Yes |
交通流量 | 通道頻寬 通道的平均頻寬 (位元組/秒) |
TunnelAverageBandwidth |
每秒位元組 | Average | ConnectionName , RemoteIP , Instance |
PT5M、PT15M、PT30M、PT1H、PT6H、PT12H、P1D | Yes |
交通流量 | 通道輸出位元組數 通道的傳出位元組數 |
TunnelEgressBytes |
位元組 | 總計 | ConnectionName , RemoteIP , Instance |
PT5M、PT15M、PT30M、PT1H、PT6H、PT12H、P1D | Yes |
錯誤 | 通道輸出封包丟棄計數 通道捨棄的傳出封包計數 |
TunnelEgressPacketDropCount |
Count | 總計 | ConnectionName , RemoteIP , Instance |
PT5M、PT15M、PT30M、PT1H、PT6H、PT12H、P1D | Yes |
錯誤 | 通道輸出 TS 不相符封包捨棄 因與通道不符而從流量選取器捨棄的傳出封包計數 |
TunnelEgressPacketDropTSMismatch |
Count | 總計 | ConnectionName , RemoteIP , Instance |
PT5M、PT15M、PT30M、PT1H、PT6H、PT12H、P1D | Yes |
交通流量 | 通道輸出封包數 通道的傳出封包計數 |
TunnelEgressPackets |
Count | 總計 | ConnectionName , RemoteIP , Instance |
PT5M、PT15M、PT30M、PT1H、PT6H、PT12H、P1D | Yes |
交通流量 | 通道輸入位元組數 通道的傳入位元組數 |
TunnelIngressBytes |
位元組 | 總計 | ConnectionName , RemoteIP , Instance |
PT5M、PT15M、PT30M、PT1H、PT6H、PT12H、P1D | Yes |
錯誤 | 通道輸入封包丟棄計數 通道捨棄的傳入封包計數 |
TunnelIngressPacketDropCount |
Count | 總計 | ConnectionName , RemoteIP , Instance |
PT5M、PT15M、PT30M、PT1H、PT6H、PT12H、P1D | Yes |
錯誤 | 通道輸入 TS 不符合封包捨棄 因與通道不符而從流量選取器捨棄的傳入封包計數 |
TunnelIngressPacketDropTSMismatch |
Count | 總計 | ConnectionName , RemoteIP , Instance |
PT5M、PT15M、PT30M、PT1H、PT6H、PT12H、P1D | Yes |
交通流量 | 通道輸入封包數 通道的傳入封包計數 |
TunnelIngressPackets |
Count | 總計 | ConnectionName , RemoteIP , Instance |
PT5M、PT15M、PT30M、PT1H、PT6H、PT12H、P1D | Yes |
交通流量 | 通道 NAT 配置 通道上 NAT 規則的配置計數 |
TunnelNatAllocations |
Count | 總計 | NatRule , ConnectionName , RemoteIP , Instance |
PT5M、PT15M、PT30M、PT1H、PT6H、PT12H、P1D | No |
交通流量 | 通道已完成 NAT 的位元組 根據 NAT 規則在通道上完成 NAT 的位元組數 |
TunnelNatedBytes |
位元組 | 總計 | NatRule , ConnectionName , RemoteIP , Instance |
PT5M、PT15M、PT30M、PT1H、PT6H、PT12H、P1D | No |
交通流量 | 通道已完成 NAT 的封包 根據 NAT 規則在通道上完成 NAT 的封包數 |
TunnelNatedPackets |
Count | 總計 | NatRule , ConnectionName , RemoteIP , Instance |
PT5M、PT15M、PT30M、PT1H、PT6H、PT12H、P1D | No |
交通流量 | 通道 NAT 流量 通道上依流量類型和 NAT 規則的 NAT 流量數目 |
TunnelNatFlowCount |
Count | 總計 | NatRule , FlowType , ConnectionName , RemoteIP , Instance |
PT5M、PT15M、PT30M、PT1H、PT6H、PT12H、P1D | No |
錯誤 | 通道 NAT 封包捨棄 通道上依捨棄類型及 NAT 規則而捨棄並完成 NAT 的封包數 |
TunnelNatPacketDrop |
Count | 總計 | NatRule , DropType , ConnectionName , RemoteIP , Instance |
PT5M、PT15M、PT30M、PT1H、PT6H、PT12H、P1D | No |
交通流量 | 通道尖峰 PPS 每秒通道尖峰封包 |
TunnelPeakPackets |
Count | 最大值 | ConnectionName , RemoteIP , Instance |
PT5M、PT15M、PT30M、PT1H、PT6H、PT12H、P1D | Yes |
交通流量 | 通道反向完成 NAT 的位元組 根據 NAT 規則在通道上反向完成 NAT 的位元組數 |
TunnelReverseNatedBytes |
位元組 | 總計 | NatRule , ConnectionName , RemoteIP , Instance |
PT5M、PT15M、PT30M、PT1H、PT6H、PT12H、P1D | No |
交通流量 | 通道反向完成 NAT 的封包 根據 NAT 規則在通道上反向完成 NAT 的封包數 |
TunnelReverseNatedPackets |
Count | 總計 | NatRule , ConnectionName , RemoteIP , Instance |
PT5M、PT15M、PT30M、PT1H、PT6H、PT12H、P1D | No |
交通流量 | 通道總流量計數 通道上的總流量計數 |
TunnelTotalFlowCount |
Count | 總計 | ConnectionName , RemoteIP , Instance |
PT5M、PT15M、PT30M、PT1H、PT6H、PT12H、P1D | Yes |
路由 | VNet 位址首碼計數 閘道後方的 Vnet 位址前置詞計數 |
VnetAddressPrefixCount |
Count | 總計 | Instance |
PT5M、PT15M、PT30M、PT1H、PT6H、PT12H、P1D | 是 |
意見反應
https://aka.ms/ContentUserFeedback。
即將登場:在 2024 年,我們將逐步淘汰 GitHub 問題作為內容的意見反應機制,並將它取代為新的意見反應系統。 如需詳細資訊,請參閱:提交並檢視相關的意見反應