共用方式為


IAuthenticationModule.Authenticate(String, WebRequest, ICredentials) 方法

定義

傳回 Authorization 類別的執行個體以回應來自伺服器的驗證挑戰。

public:
 System::Net::Authorization ^ Authenticate(System::String ^ challenge, System::Net::WebRequest ^ request, System::Net::ICredentials ^ credentials);
public System.Net.Authorization? Authenticate (string challenge, System.Net.WebRequest request, System.Net.ICredentials credentials);
public System.Net.Authorization Authenticate (string challenge, System.Net.WebRequest request, System.Net.ICredentials credentials);
abstract member Authenticate : string * System.Net.WebRequest * System.Net.ICredentials -> System.Net.Authorization
Public Function Authenticate (challenge As String, request As WebRequest, credentials As ICredentials) As Authorization

參數

challenge
String

伺服器所傳送的驗證要求。

request
WebRequest

與要求相關的 WebRequest

credentials
ICredentials

與要求相關的認證。

傳回

Authorization 執行個體,含有要求的授權訊息,或者如果無法處理要求時,則為 null

範例

下列範例會示範如何使用 Authenticate 方法。 如需完整的範例, AuthenticationManager 請參閱 類別。

// Authenticate is the core method for this custom authentication.
// When an internet resource requests authentication, the WebRequest::GetResponse
// method calls the AuthenticationManager::Authenticate method. This method, in
// turn, calls the Authenticate method on each of the registered authentication
// modules, in the order they were registered. When the authentication is
// complete an Authorization object is returned to the WebRequest, as
// shown by this routine's retun type.
virtual Authorization^ Authenticate( String^ challenge, WebRequest^ request, ICredentials^ credentials )
{
   Encoding^ ASCII = Encoding::ASCII;
   
   // Get the username and password from the credentials
   NetworkCredential^ MyCreds = credentials->GetCredential( request->RequestUri, "Basic" );
   if ( PreAuthenticate( request, credentials ) == nullptr )
         Console::WriteLine( "\n Pre-authentication is not allowed." );
   else
         Console::WriteLine( "\n Pre-authentication is allowed." );

   
   // Verify that the challenge satisfies the authorization requirements.
   bool challengeOk = checkChallenge( challenge, MyCreds->Domain );
   if (  !challengeOk )
         return nullptr;

   
   // Create the encrypted string according to the Basic authentication format as
   // follows:
   // a)Concatenate username and password separated by colon;
   // b)Apply ASCII encoding to obtain a stream of bytes;
   // c)Apply Base64 Encoding to this array of bytes to obtain the encoded
   // authorization.
   String^ BasicEncrypt = String::Concat( MyCreds->UserName, ":", MyCreds->Password );
   String^ BasicToken = String::Concat( "Basic ", Convert::ToBase64String( ASCII->GetBytes( BasicEncrypt ) ) );
   
   // Create an Authorization object using the above encoded authorization.
   Authorization^ resourceAuthorization = gcnew Authorization( BasicToken );
   
   // Get the Message property which contains the authorization string that the
   // client returns to the server when accessing protected resources
   Console::WriteLine( "\n Authorization Message: {0}", resourceAuthorization->Message );
   
   // Get the Complete property which is set to true when the authentication process
   // between the client and the server is finished.
   Console::WriteLine( "\n Authorization Complete: {0}", resourceAuthorization->Complete );
   
   Console::WriteLine( "\n Authorization ConnectionGroupId: {0}", resourceAuthorization->ConnectionGroupId );
   return resourceAuthorization;
}
// Authenticate is the core method for this custom authentication.
// When an Internet resource requests authentication, the WebRequest.GetResponse
// method calls the AuthenticationManager.Authenticate method. This method, in
// turn, calls the Authenticate method on each of the registered authentication
// modules, in the order in which they were registered. When the authentication is
// complete an Authorization object is returned to the WebRequest.
public Authorization Authenticate(String challenge, WebRequest request, ICredentials credentials)
{
  Encoding ASCII = Encoding.ASCII;

  // Get the username and password from the credentials
  NetworkCredential myCreds = credentials.GetCredential(request.RequestUri, "Basic");

  if (PreAuthenticate(request, credentials) == null)
    Console.WriteLine("\n Pre-authentication is not allowed.");
  else
    Console.WriteLine("\n Pre-authentication is allowed.");

  // Verify that the challenge satisfies the authorization requirements.
  bool challengeOk = CheckChallenge(challenge, myCreds.Domain);

  if (!challengeOk)
    return null;

  // Create the encrypted string according to the Basic authentication format as
  // follows:
  // a)Concatenate the username and password separated by colon;
  // b)Apply ASCII encoding to obtain a stream of bytes;
  // c)Apply Base64 encoding to this array of bytes to obtain the encoded
  // authorization.
  string basicEncrypt = myCreds.UserName + ":" + myCreds.Password;

  string basicToken = "Basic " + Convert.ToBase64String(ASCII.GetBytes(basicEncrypt));

  // Create an Authorization object using the encoded authorization above.
  Authorization resourceAuthorization = new Authorization(basicToken);

  // Get the Message property, which contains the authorization string that the
  // client returns to the server when accessing protected resources.
  Console.WriteLine("\n Authorization Message:{0}",resourceAuthorization.Message);

  // Get the Complete property, which is set to true when the authentication process
  // between the client and the server is finished.
  Console.WriteLine("\n Authorization Complete:{0}",resourceAuthorization.Complete);

  Console.WriteLine("\n Authorization ConnectionGroupId:{0}",resourceAuthorization.ConnectionGroupId);

  return resourceAuthorization;
}
  ' Authenticate is the core method for this custom authentication.
  ' When an Internet resource requests authentication, the WebRequest.GetResponse 
  ' method calls the AuthenticationManager.Authenticate method. This method, in 
  ' turn, calls the Authenticate method on each of the registered authentication
  ' modules, in the order in which they were registered. When the authentication is 
  ' complete an Authorization object is returned to the WebRequest.
  Public Function Authenticate(ByVal challenge As String, ByVal request As WebRequest, ByVal credentials As ICredentials) As Authorization _
      Implements IAuthenticationModule.Authenticate


    Dim ASCII As Encoding = Encoding.ASCII

    ' Get the username and password from the credentials
    Dim MyCreds As NetworkCredential = credentials.GetCredential(request.RequestUri, "Basic")

    If PreAuthenticate(request, credentials) Is Nothing Then
      Console.WriteLine(ControlChars.Lf + " Pre-authentication is not allowed.")
    Else
      Console.WriteLine(ControlChars.Lf + " Pre-authentication is allowed.")
    End If
    ' Verify that the challenge satisfies the authorization requirements.
    Dim challengeOk As Boolean = checkChallenge(challenge, MyCreds.Domain)

    If Not challengeOk Then
      Return Nothing
    End If

    ' Create the encrypted string according to the Basic authentication format as
    ' follows:
    ' a)Concatenate the username and password separated by colon;
    ' b)Apply ASCII encoding to obtain a stream of bytes;
    ' c)Apply Base64 encoding to this array of bytes to obtain the encoded 
    ' authorization.
    Dim BasicEncrypt As String = MyCreds.UserName + ":" + MyCreds.Password

    Dim BasicToken As String = "Basic " + Convert.ToBase64String(ASCII.GetBytes(BasicEncrypt))

    ' Create an Authorization object using the encoded authorization above.
    Dim resourceAuthorization As New Authorization(BasicToken)

    ' Get the Message property, which contains the authorization string that the 
    ' client returns to the server when accessing protected resources.
    Console.WriteLine(ControlChars.Lf + " Authorization Message:{0}", resourceAuthorization.Message)

    ' Get the Complete property, which is set to true when the authentication process 
    ' between the client and the server is finished.
    Console.WriteLine(ControlChars.Lf + " Authorization Complete:{0}", resourceAuthorization.Complete)

    Console.WriteLine(ControlChars.Lf + " Authorization ConnectionGroupId:{0}", resourceAuthorization.ConnectionGroupId)


    Return resourceAuthorization
  End Function 'Authenticate
End Class

備註

方法 Authenticate 會使用伺服器執行驗證程式,並將 實體傳回 AuthorizationAuthenticationManager

給實施者的注意事項

會在 AuthenticationManager 已註冊的驗證模組上呼叫 Authenticate(String, WebRequest, ICredentials) 方法,以判斷哪個模組會處理挑戰。 如果驗證模組無法處理挑戰, Authenticate(String, WebRequest, ICredentials) 方法必須傳回 null。 如果驗證模組在進行驗證程式時發生錯誤, Authenticate(String, WebRequest, ICredentials) 則必須擲回例外狀況。

適用於