Windows Forms DataGridView 控制項中的資料行填入模式
在資料行填滿模式中，DataGridView 控制項會自動調整其資料行的大小，使資料行填滿可用顯示區域的寬度。 只有在必須將每個資料行的寬度保持等於或大於其 MinimumWidth 屬性值時，這個控制項才會顯示水平捲軸。
每個資料行的調整行為取決於其 InheritedAutoSizeMode 屬性。 如果資料行值為 NotSet (預設值)，則這個屬性的值會從資料行的 AutoSizeMode 屬性或控制項的 AutoSizeColumnsMode 屬性繼承。
每個資料行都可以使用不同的調整模式，但是任何使用 Fill 調整模式的資料行都會共用其他資料行未使用的顯示區域寬度。 這個寬度會按照所有填滿模式資料行之 FillWeight 屬性值的相對比例來分割。 例如，如果兩個資料行的 FillWeight 值為 100 和 200，則第一個資料行寬度會是第二個資料行寬度的一半。
使用者在填滿模式中調整大小
不同於調整模式是根據儲存格內容來調整大小，填滿模式不會防止使用者調整 Resizable 屬性值為 true 的資料行大小。 當使用者調整填滿模式資料行的大小時，已調整大小之資料行後的任何填滿模式資料行 (如果 RightToLeft 為 false，則為右側，否則為左側) 也會調整大小，以補償可用寬度的變更。 如果已調整大小的資料行後沒有填滿模式資料行，則會調整控制項中其他所有填滿模式資料行的大小進行補償。 如果控制項中沒有其他任何填滿模式資料行，則會略過調整大小。 如果已調整非填滿模式資料行的大小，則控制項中所有填滿模式資料行會變更大小進行補償。
調整填滿模式資料行的大小之後，所有已變更資料行的 FillWeight 值都會按比例調整。 例如，如果有四個填滿模式資料行的 FillWeight 值為 100，將第二個資料行的大小調整為其原始寬度的一半會使 FillWeight 值變成 100、50、125 和 125。 調整非填滿模式資料行的大小不會變更任何 FillWeight 值，因為只有在需要維持相同比例時，才會調整填滿模式資料行的大小。
根據內容調整 FillWeight
您可以使用 DataGridView 自動化調整大小方法 (例如 AutoResizeColumns 方法)，來初始化填滿模式資料行的 FillWeight 值。 這個方法會先計算資料行顯示其內容所需的寬度。 接著，控制項會調整所有填滿模式資料行的 FillWeight 值，使其比例符合計算出來的寬度比例。 最後，控制項會使用新的 FillWeight 比例來調整填滿模式資料行的大小，使控制項中的所有資料行填滿可用的水平空間。
範例
描述
您可以針對許多不同的情況，使用適當的 AutoSizeMode、MinimumWidth、FillWeight 和 Resizable 屬性值來自訂資料行調整行為。
下列示範程式碼可讓您針對不同資料行的 AutoSizeMode、FillWeight 和 MinimumWidth 屬性，試驗不同的值。 在這個範例中，DataGridView 控制項會繫結至自己的 Columns 集合，而且一個資料行會繫結至每一個 HeaderText、AutoSizeMode、FillWeight、MinimumWidth 和 Width 屬性。 每個資料行也會以控制項中的一個資料列來表示，而變更資料列中的值會更新對應資料行中的屬性，以便您查看這些值的互動方式。
程式碼
using System;
using System.ComponentModel;
using System.Reflection;
using System.Windows.Forms;
public class Form1 : Form
{
[STAThread]
public static void Main()
{
Application.Run(new Form1());
}
private DataGridView dataGridView1 = new DataGridView();
public Form1()
{
dataGridView1.Dock = DockStyle.Fill;
Controls.Add(dataGridView1);
InitializeDataGridView();
Width *= 2;
Text = "Column Fill-Mode Demo";
}
private void InitializeDataGridView()
{
// Add columns to the DataGridView, binding them to the
// specified DataGridViewColumn properties.
AddReadOnlyColumn("HeaderText", "Column");
AddColumn("AutoSizeMode");
AddColumn("FillWeight");
AddColumn("MinimumWidth");
AddColumn("Width");
// Bind the DataGridView to its own Columns collection.
dataGridView1.AutoGenerateColumns = false;
dataGridView1.DataSource = dataGridView1.Columns;
// Configure the DataGridView so that users can manually change
// only the column widths, which are set to fill mode.
dataGridView1.AllowUserToAddRows = false;
dataGridView1.AllowUserToDeleteRows = false;
dataGridView1.AllowUserToResizeRows = false;
dataGridView1.RowHeadersWidthSizeMode =
DataGridViewRowHeadersWidthSizeMode.DisableResizing;
dataGridView1.ColumnHeadersHeightSizeMode =
DataGridViewColumnHeadersHeightSizeMode.DisableResizing;
dataGridView1.AutoSizeColumnsMode =
DataGridViewAutoSizeColumnsMode.Fill;
// Configure the top left header cell as a reset button.
dataGridView1.TopLeftHeaderCell.Value = "reset";
dataGridView1.TopLeftHeaderCell.Style.ForeColor =
System.Drawing.Color.Blue;
// Add handlers to DataGridView events.
dataGridView1.CellClick +=
new DataGridViewCellEventHandler(dataGridView1_CellClick);
dataGridView1.ColumnWidthChanged += new
DataGridViewColumnEventHandler(dataGridView1_ColumnWidthChanged);
dataGridView1.CurrentCellDirtyStateChanged +=
new EventHandler(dataGridView1_CurrentCellDirtyStateChanged);
dataGridView1.DataError +=
new DataGridViewDataErrorEventHandler(dataGridView1_DataError);
dataGridView1.CellEndEdit +=
new DataGridViewCellEventHandler(dataGridView1_CellEndEdit);
dataGridView1.CellValueChanged +=
new DataGridViewCellEventHandler(dataGridView1_CellValueChanged);
}
private void AddReadOnlyColumn(String dataPropertyName, String columnName)
{
AddColumn(typeof(DataGridViewColumn), dataPropertyName, true,
columnName);
}
private void AddColumn(String dataPropertyName)
{
AddColumn(typeof(DataGridViewColumn), dataPropertyName, false,
dataPropertyName);
}
// Adds a column to the DataGridView control, binding it to specified
// property of the specified type and optionally making it read-only.
private void AddColumn(
Type type,
String dataPropertyName,
Boolean readOnly,
String columnName)
{
// Retrieve information about the property through reflection.
PropertyInfo property = type.GetProperty(dataPropertyName);
// Confirm that the property exists and is accessible.
if (property == null) throw new ArgumentException("No accessible " +
dataPropertyName + " property was found in the " + type.Name + " type.");
// Confirm that the property is browsable.
BrowsableAttribute[] browsables = (BrowsableAttribute[])
property.GetCustomAttributes(typeof(BrowsableAttribute), false);
if (browsables.Length > 0 && !browsables[0].Browsable)
{
throw new ArgumentException("The " + dataPropertyName + " property has a " +
"Browsable(false) attribute, and therefore cannot be bound.");
}
// Create and initialize a column, using a combo box column for
// enumeration properties, a check box column for Boolean properties,
// and a text box column otherwise.
DataGridViewColumn column;
Type valueType = property.PropertyType;
if (valueType.IsEnum)
{
column = new DataGridViewComboBoxColumn();
// Populate the drop-down list with the enumeration values.
((DataGridViewComboBoxColumn)column).DataSource
= Enum.GetValues(valueType);
}
else if (valueType.Equals(typeof(Boolean)))
{
column = new DataGridViewCheckBoxColumn();
}
else
{
column = new DataGridViewTextBoxColumn();
}
// Initialize and bind the column.
column.ValueType = valueType;
column.Name = columnName;
column.DataPropertyName = dataPropertyName;
column.ReadOnly = readOnly;
// Add the column to the control.
dataGridView1.Columns.Add(column);
}
private void ResetDataGridView()
{
dataGridView1.CancelEdit();
dataGridView1.Columns.Clear();
dataGridView1.DataSource = null;
InitializeDataGridView();
}
private void dataGridView1_CellClick(
object sender, DataGridViewCellEventArgs e)
{
if (e.ColumnIndex == -1 && e.RowIndex == -1)
{
ResetDataGridView();
}
}
private void dataGridView1_ColumnWidthChanged(
object sender, DataGridViewColumnEventArgs e)
{
// Invalidate the row corresponding to the column that changed
// to ensure that the FillWeight and Width entries are updated.
dataGridView1.InvalidateRow(e.Column.Index);
}
private void dataGridView1_CurrentCellDirtyStateChanged(
object sender, EventArgs e)
{
// For combo box and check box cells, commit any value change as soon
// as it is made rather than waiting for the focus to leave the cell.
if (!dataGridView1.CurrentCell.OwningColumn.GetType()
.Equals(typeof(DataGridViewTextBoxColumn)))
{
dataGridView1.CommitEdit(DataGridViewDataErrorContexts.Commit);
}
}
private void dataGridView1_DataError(
object sender, DataGridViewDataErrorEventArgs e)
{
if (e.Exception == null) return;
// If the user-specified value is invalid, cancel the change
// and display the error icon in the row header.
if ((e.Context & DataGridViewDataErrorContexts.Commit) != 0 &&
(typeof(FormatException).IsAssignableFrom(e.Exception.GetType()) ||
typeof(ArgumentException).IsAssignableFrom(e.Exception.GetType())))
{
dataGridView1.Rows[e.RowIndex].ErrorText =
"The specified value is invalid.";
e.Cancel = true;
}
else
{
// Rethrow any exceptions that aren't related to the user input.
e.ThrowException = true;
}
}
private void dataGridView1_CellEndEdit(
object sender, DataGridViewCellEventArgs e)
{
// Ensure that the error icon in the row header is hidden.
dataGridView1.Rows[e.RowIndex].ErrorText = "";
}
private void dataGridView1_CellValueChanged(
object sender, DataGridViewCellEventArgs e)
{
// Retrieve the property to change.
String nameOfPropertyToChange =
dataGridView1.Columns[e.ColumnIndex].Name;
PropertyInfo propertyToChange =
typeof(DataGridViewColumn).GetProperty(nameOfPropertyToChange);
// Retrieve the column to change.
String nameOfColumnToChange =
(String)dataGridView1["Column", e.RowIndex].Value;
DataGridViewColumn columnToChange =
dataGridView1.Columns[nameOfColumnToChange];
// Use reflection to update the value of the column property.
propertyToChange.SetValue(columnToChange,
dataGridView1[nameOfPropertyToChange, e.RowIndex].Value, null);
}
}
Imports System.ComponentModel
Imports System.Reflection
Imports System.Windows.Forms
Public Class Form1
Inherits Form
<STAThread()> _
Public Shared Sub Main()
Application.Run(New Form1())
End Sub
Private WithEvents dataGridView1 As New DataGridView()
Public Sub New()
dataGridView1.Dock = DockStyle.Fill
Controls.Add(dataGridView1)
InitializeDataGridView()
Width = Width * 2
Text = "Column Fill-Mode Demo"
End Sub
Private Sub InitializeDataGridView()
' Add columns to the DataGridView, binding them to the
' specified DataGridViewColumn properties.
AddReadOnlyColumn("HeaderText", "Column")
AddColumn("AutoSizeMode")
AddColumn("FillWeight")
AddColumn("MinimumWidth")
AddColumn("Width")
' Bind the DataGridView to its own Columns collection.
dataGridView1.AutoGenerateColumns = False
dataGridView1.DataSource = dataGridView1.Columns
' Configure the DataGridView so that users can manually change
' only the column widths, which are set to fill mode.
dataGridView1.AllowUserToAddRows = False
dataGridView1.AllowUserToDeleteRows = False
dataGridView1.AllowUserToResizeRows = False
dataGridView1.RowHeadersWidthSizeMode = _
DataGridViewRowHeadersWidthSizeMode.DisableResizing
dataGridView1.ColumnHeadersHeightSizeMode = _
DataGridViewColumnHeadersHeightSizeMode.DisableResizing
dataGridView1.AutoSizeColumnsMode = _
DataGridViewAutoSizeColumnsMode.Fill
' Configure the top left header cell as a reset button.
dataGridView1.TopLeftHeaderCell.Value = "reset"
dataGridView1.TopLeftHeaderCell.Style.ForeColor = _
System.Drawing.Color.Blue
End Sub
Private Sub AddReadOnlyColumn(ByVal dataPropertyName As String, _
ByVal columnName As String)
AddColumn(GetType(DataGridViewColumn), dataPropertyName, True, _
columnName)
End Sub
Private Sub AddColumn(ByVal dataPropertyName As String)
AddColumn(GetType(DataGridViewColumn), dataPropertyName, False, _
dataPropertyName)
End Sub
' Adds a column to the DataGridView control, binding it to specified
' property of the specified type and optionally making it read-only.
Private Sub AddColumn( _
ByVal type As Type, _
ByVal dataPropertyName As String, _
ByVal isReadOnly As Boolean, _
ByVal columnName As String)
' Retrieve information about the property through reflection.
Dim propertyInfo1 As PropertyInfo = type.GetProperty(dataPropertyName)
' Confirm that the property exists and is accessible.
If propertyInfo1 Is Nothing Then
Throw New ArgumentException("No accessible " & dataPropertyName & _
" property was found in the " & type.Name & " type.")
End If
' Confirm that the property is browsable.
Dim browsables As BrowsableAttribute() = CType( _
propertyInfo1.GetCustomAttributes(GetType(BrowsableAttribute), _
False), BrowsableAttribute())
If browsables.Length > 0 AndAlso Not browsables(0).Browsable Then
Throw New ArgumentException("The " & dataPropertyName & " property has a " & _
"Browsable(false) attribute, and therefore cannot be bound.")
End If
' Create and initialize a column, using a combo box column for
' enumeration properties, a check box column for Boolean properties,
' and a text box column otherwise.
Dim column As DataGridViewColumn
Dim valueType As Type = propertyInfo1.PropertyType
If valueType.IsEnum Then
column = New DataGridViewComboBoxColumn()
' Populate the drop-down list with the enumeration values.
CType(column, DataGridViewComboBoxColumn).DataSource = _
[Enum].GetValues(valueType)
ElseIf valueType.Equals(GetType(Boolean)) Then
column = New DataGridViewCheckBoxColumn()
Else
column = New DataGridViewTextBoxColumn()
End If
' Initialize and bind the column.
column.ValueType = valueType
column.Name = columnName
column.DataPropertyName = dataPropertyName
column.ReadOnly = isReadOnly
' Add the column to the control.
dataGridView1.Columns.Add(column)
End Sub
Private Sub ResetDataGridView()
dataGridView1.CancelEdit()
dataGridView1.Columns.Clear()
dataGridView1.DataSource = Nothing
InitializeDataGridView()
End Sub
Private Sub dataGridView1_CellClick( _
ByVal sender As Object, ByVal e As DataGridViewCellEventArgs) _
Handles dataGridView1.CellClick
If e.ColumnIndex = -1 AndAlso e.RowIndex = -1 Then
ResetDataGridView()
End If
End Sub
Private Sub dataGridView1_ColumnWidthChanged( _
ByVal sender As Object, ByVal e As DataGridViewColumnEventArgs) _
Handles dataGridView1.ColumnWidthChanged
' Invalidate the row corresponding to the column that changed
' to ensure that the FillWeight and Width entries are updated.
dataGridView1.InvalidateRow(e.Column.Index)
End Sub
Private Sub dataGridView1_CurrentCellDirtyStateChanged( _
ByVal sender As Object, ByVal e As EventArgs) _
Handles dataGridView1.CurrentCellDirtyStateChanged
' For combo box and check box cells, commit any value change as soon
' as it is made rather than waiting for the focus to leave the cell.
If Not dataGridView1.CurrentCell.OwningColumn.GetType() _
.Equals(GetType(DataGridViewTextBoxColumn)) Then
dataGridView1.CommitEdit(DataGridViewDataErrorContexts.Commit)
End If
End Sub
Private Sub dataGridView1_DataError( _
ByVal sender As Object, ByVal e As DataGridViewDataErrorEventArgs) _
Handles dataGridView1.DataError
If e.Exception Is Nothing Then Return
' If the user-specified value is invalid, cancel the change
' and display the error icon in the row header.
If Not (e.Context And DataGridViewDataErrorContexts.Commit) = 0 AndAlso _
(GetType(FormatException).IsAssignableFrom(e.Exception.GetType()) Or _
GetType(ArgumentException).IsAssignableFrom(e.Exception.GetType())) Then
dataGridView1.Rows(e.RowIndex).ErrorText = e.Exception.Message
e.Cancel = True
Else
' Rethrow any exceptions that aren't related to the user input.
e.ThrowException = True
End If
End Sub
Private Sub dataGridView1_CellEndEdit( _
ByVal sender As Object, ByVal e As DataGridViewCellEventArgs) _
Handles dataGridView1.CellEndEdit
' Ensure that the error icon in the row header is hidden.
dataGridView1.Rows(e.RowIndex).ErrorText = ""
End Sub
Private Sub dataGridView1_CellValueChanged( _
ByVal sender As Object, ByVal e As DataGridViewCellEventArgs) _
Handles dataGridView1.CellValueChanged
' Ignore the change to the top-left header cell.
If e.ColumnIndex < 0 Then Return
' Retrieve the property to change.
Dim nameOfPropertyToChange As String = _
dataGridView1.Columns(e.ColumnIndex).Name
Dim propertyToChange As PropertyInfo = _
GetType(DataGridViewColumn).GetProperty(nameOfPropertyToChange)
' Retrieve the column to change.
Dim nameOfColumnToChange As String = _
CStr(dataGridView1("Column", e.RowIndex).Value)
Dim columnToChange As DataGridViewColumn = _
dataGridView1.Columns(nameOfColumnToChange)
' Use reflection to update the value of the column property.
propertyToChange.SetValue(columnToChange, _
dataGridView1(nameOfPropertyToChange, e.RowIndex).Value, Nothing)
End Sub
End Class
註解
若要使用這個示範應用程式：
變更表單的大小 觀察資料行如何在維持比例 (由 FillWeight 屬性值指定) 的同時，變更其寬度。
使用滑鼠拖曳資料行分隔線來變更資料行大小。 觀察 FillWeight 值如何變更。
變更一個資料行的 MinimumWidth 值，然後以拖曳方式調整表單的大小。 觀察當表單變得很小時，Width 值如何維持在 MinimumWidth 值以上。
將所有資料行的 MinimumWidth 值變更為較大的數值，讓結合的值超過控制項的寬度。 觀察水平捲軸的顯示方式。
變更一些資料行的 AutoSizeMode 值。 當您調整資料行或表單的大小時，觀察其效果。
編譯程式碼
這個範例需要：
- System、System.Drawing 和 System.Windows.Forms 組件的參考。
另請參閱
- DataGridView
- DataGridView.AutoResizeColumns
- DataGridView.AutoSizeColumnsMode
- DataGridViewAutoSizeColumnsMode
- DataGridViewColumn
- DataGridViewColumn.InheritedAutoSizeMode
- DataGridViewColumn.AutoSizeMode
- DataGridViewAutoSizeColumnMode
- DataGridViewColumn.FillWeight
- DataGridViewColumn.MinimumWidth
- DataGridViewColumn.Width
- DataGridViewColumn.Resizable
- Control.RightToLeft
- 調整 Windows Forms DataGridView 控制項中資料行和資料列的大小
意見反應
即將登場：在 2024 年，我們將逐步淘汰 GitHub 問題作為內容的意見反應機制，並將它取代為新的意見反應系統。 如需詳細資訊，請參閱：https://aka.ms/ContentUserFeedback。
提交並檢視相關的意見反應