編輯

共用方式為


Design details: average cost

The average cost of an item is calculated with a periodic weighted average. The average is based on the average cost period you have specified in Business Central.

The valuation date is set automatically.

Setting up average cost calculation

The following table describes the two fields on the Inventory Setup page that must be filled to enable average cost calculation.

Field Description
Average Cost Period Specifies which period the average cost is calculated in. The following options exist:

- Day
- Week
- Month
- Accounting Period

Inventory decreases that are posted in the average cost period get the average cost calculated for that period.
Average Cost Calc. Type Specifies how the average cost is calculated. The following options exist:

- Item
- Item, Variant, and Location
With this option, the average cost is calculated for each item, for each location, and for each variant of the item. The average cost of this item depends on where you store it and the variant you select, such as color.

Note

You can only use one average cost period and one average cost calculation type in a fiscal year.

The Accounting Periods page shows which average cost period and which average cost calculation type is in effect during that period, for each accounting period.

Calculating average cost

When you post a transaction for an item that uses the Average costing method, an entry is created in the Avg. Cost Adjmt. Entry Point table. This entry contains the transaction’s item number, variant code, and location code. The entry also contains the Valuation Date field, which specifies the last date of the average cost period in which the transaction was posted.

Note

This field should not be confused with the Valuation Date field in the Value Entry table, which shows the date when the value takes effect and is used to determine the average cost period in which the value entry belongs.

The average cost of a transaction is calculated when the item’s cost is adjusted. For more information, see Design Details: Cost Adjustment. A cost adjustment uses the entries in the Avg. Cost Adjmt. Entry Point table to identify which items (or items, locations, and variants) to calculate average costs for. For each entry with a cost that hasn't been adjusted, the cost adjustment uses the following to determine the average cost:

  • Determines the cost of the item at the start of the average cost period.
  • Adds the sum of the inbound costs that were posted during the average cost period. These include purchases, sales returns, positive adjustments, and production and assembly outputs.
  • Subtracts the sum of the costs of any outbound transactions that were fixed-applied to receipts in the average cost period. These typically include purchase returns and negative outputs.
  • Divides by the total inventory quantity for the end of the average cost period. Excludes inventory decreases that are being valued.

The calculated average cost is then applied to the inventory decreases for the item (or item, location, and variant) with posting dates in the average cost period. For inventory increases that are fixed-applied to inventory decreases in the average cost period, Business Central forwards the calculated average cost from the increase to the decrease.

Example: average cost period = day

The following example shows the effect of calculating average cost based on an average cost period of one day. The Average Cost Calc. Type field on the Inventory Setup page is set to Item.

The following table shows item ledger entries for the sample average-cost item, ITEM1, before you run the Adjust Cost - Item Entries batch job.

Posting Date Item Ledger Entry Type Quantity Cost Amount (Actual) Entry No.
01-01-23 Purchase 1 20.00 1
01-01-23 Purchase 1 40.00 2
01-01-23 Sale -1 -20.00 3
02-01-23 Sale -1 -40.00 4
02-02-23 Purchase 1 100.00 5
02-03-23 Sale -1 -100.00 6

Note

Because cost adjustment has not yet occurred, the values in the Cost Amount (Actual) field of the inventory decreases corresponding to the inventory increases that they are applied to.

The following table shows the entries in the Avg. Cost Adjmt. Entry Point table that apply to the value entries that result from the item ledger entries in the preceding table.

Item No. Variant Code Location Code Valuation Date Cost is Adjusted
ITEM1 BLUE 01-01-23 No
ITEM1 BLUE 02-01-23 No
ITEM1 BLUE 02-02-23 No
ITEM1 BLUE 02-03-23 No

The following table shows the same item ledger entries after you run the Adjust Cost - Item Entries batch job. The average cost per day is calculated and applied to the inventory decreases.

Posting Date Item Ledger Entry Type Quantity Cost Amount (Actual) Entry No.
01-01-23 Purchase 1 20.00 1
01-01-23 Purchase 1 40.00 2
01-01-23 Sale -1 -30.00 3
02-01-23 Sale -1 -30.00 4
02-02-23 Purchase 1 100.00 5
02-03-23 Sale -1 -100.00 6

Example: average cost period = month

This example shows the effect of calculating the average cost based on an average cost period of one month. The Average Cost Calc. Type field on the Inventory Setup page is set to Item.

If the average cost period is one month, Business Central creates one entry for each combination of item number, variant code, location code, and valuation date.

The following table shows item ledger entries for the sample average-cost item, ITEM1, before you run the Adjust Cost - Item Entries batch job.

Posting Date Item Ledger Entry Type Quantity Cost Amount (Actual) Entry No.
01-01-23 Purchase 1 20.00 1
01-01-23 Purchase 1 40.00 2
01-01-23 Sale -1 -20.00 3
02-01-23 Sale -1 -40.00 4
02-02-23 Purchase 1 100.00 5
02-03-23 Sale -1 -100.00 6

Note

Because cost adjustment has not occurred yet, the values in the Cost Amount (Actual) field of the inventory decreases corresponding to the inventory increases that they are applied to.

The following table shows the entries in the Avg. Cost Adjmt. Entry Point table that apply to the value entries that result from the item ledger entries in the preceding table.

Item No. Variant Code Location Code Valuation Date Cost is Adjusted
ITEM1 BLUE 01-31-23 No
ITEM1 BLUE 02-28-23 No

Note

The valuation date is set to the last day in the average cost period, which in this case is the last day of the month.

The following table shows the same item ledger entries after you run the Adjust Cost - Item Entries batch job. The average cost per month is calculated and applied to the inventory decreases.

Posting Date Item Ledger Entry Type Quantity Cost Amount (Actual) Entry No.
01-01-23 Purchase 1 20.00 1
01-01-23 Purchase 1 40.00 2
01-01-23 Sale -1 -30.00 3
02-01-23 Sale -1 -65.00 4
02-02-23 Purchase 1 100.00 5
02-03-23 Sale -1 -65.00 6

The average cost of entry number 3 is calculated in the average cost period for January. The average cost for entries 4 and 6 is calculated in the average cost period for February.

To get the average cost for February, Business Central adds the average cost of the item received in inventory (100.00) to the average cost at the beginning of the period (30.00). The sum (130.00) is then divided by the total quantity in inventory (2). This calculation gives the resulting average cost of the item in the February period (65.00). The average cost is assigned to the inventory decreases in the period (entries 4 and 6).

Setting the valuation date

The Valuation Date field in the Value Entry table determines the average cost period in which an inventory decrease entry belongs. This setting also applies to work in process (WIP) inventory.

The following table shows the criteria that are used to set the valuation date.

Scenario Posting Date Valued Quantity Revaluation Valuation Date
1 Positive No Posting date of item ledger entry
2 Later than the latest valuation date of applied value entries Negative No Posting date of item ledger entry
3 Earlier than the latest valuation date of applied value entries Positive No Latest valuation date of the applied value entries
4 Negative Yes Posting date of the revaluation value entry

Example

The following table of value entries illustrates the different scenarios.

Scenario Posting Date Item Ledger Entry Type Valuation Date Valued Quantity Cost Amount (Actual) Item Ledger Entry No. Entry No.
1 01-01-20 Purchase 01-01-20 2 20.00 1 1
2 01-15-20 (Item Charge) 01-01-20 2 8.00 1 2
3 02-01-20 Sale 02-01-20 -1 -14.00 2 3
4 03-01-20 (Revaluation) 03-01-20 1 -.4.00 1 4
5 02-01-20 Sale 03-01-20 -1 -10.00 3 5

Note

In entry number 5 in the preceding table, the user has entered a sales order with a posting date (02-01-20) that comes before the latest valuation date of applied value entries (03-01-20). If the corresponding value in the Cost Amount (Actual) field for this date (02-01-20) were used for this entry, then it would be 14.00. This would give a situation where the quantity on inventory is zero, but the inventory value is –4.00.

To avoid such a quantity-value mismatch, the valuation date is set to equal the latest valuation date of the applied value entries (03-01-20). The value in the Cost Amount (Actual) field becomes 10.00 (after revaluation), which means that the quantity on inventory is zero, and the inventory value is also zero.

Caution

Because the Inventory Valuation report is based on posting date, the report will reflect any quantity-value mismatches in scenarios as in the above example. For more information, see Design Details: Inventory Valuation.

If the quantity on inventory is less than zero after you post the inventory decrease, the valuation date is set to the posting date of the inventory decrease. You can change this date when the inventory increase is applied, according to the rules described in the note earlier in this section.

Recalculating average cost

Valuing inventory decreases as a weighted average would be straightforward in several scenarios:

  • Purchases are always invoiced before sales.
  • Postings are never backdated.
  • You never made mistakes.

However, the reality is different.

As the examples in this article illustrate, the valuation date is defined as the date from which the value entry is included in the average cost calculation. This setting lets you do several things for items with the Average costing method:

  • Invoice the sale of an item before you invoice its purchase.
  • Backdate a posting.
  • Recover an incorrect posting.

Note

Another reason for this flexibility is fixed application. For more information about fixed application, see Design Details: Item Application.

Because of this flexibility, you might have to recalculate the average cost after posting. For example, if you post an inventory increase or decrease with a valuation date that's before an inventory decrease. The recalculation of the average cost occurs automatically when you run the Adjust Cost - Item Entries batch job, manually or automatically.

You can change the inventory valuation base within an accounting period by changing the values in the Average Cost Period and Average Cost Calc. Type fields. However, we recommend that you use caution and consult your auditor.

Example of recalculated average cost

This example shows how Business Central recalculates the average cost when you post on a date that's before an inventory decrease. The example is based on an average cost period of Day.

The following table shows the value entries that exist for the item before the posting is introduced.

Valuation Date Quantity Cost Amount (Actual) Entry No.
01-01-20 1 10.00 1
01-02-20 1 20.00 2
02-15-20 -1 -15.00 3
02-16-20 -1 -15.00 4

The user posts an inventory increase (entry number 5) with a valuation date (01-03-20) that's before an inventory decrease. To balance the inventory, the average cost must be recalculated and adjusted to 17.00.

The following table shows the value entries that exist for the item after entry number 5 is introduced.

Valuation Date Quantity Cost Amount (Actual) Entry No.
01-01-20 1 10.00 1
01-02-20 1 20.00 2
01-03-20 1 21.00 5
02-15-20 -1 -17.00 3
02-16-20 -1 -17.00 4

See Also

Design Details: Inventory Costing
Design Details: Costing Methods
Design Details: Cost Adjustment
Design Details: Item Application
Managing Inventory Costs
Finance
Work with Business Central
Glossary of terms in Dynamics 365 business processes
Business process for product costing and how it relates to other processes with Dynamics 365

Find free e-learning modules for Business Central here