編輯

共用方式為


Configure SSO on macOS and iOS

The Microsoft Authentication Library (MSAL) for macOS and iOS supports single sign-on (SSO) between macOS/iOS apps and browsers. This article covers the following SSO scenarios:

This type of SSO works between multiple apps distributed by the same Apple Developer. It provides silent SSO (that is, the user isn't prompted for credentials) by reading refresh tokens written by other apps from the keychain, and exchanging them for access tokens silently.

Microsoft provides apps called brokers that enable SSO between applications from different vendors as long as the mobile device is registered with Microsoft Entra ID. This type of SSO requires a broker application be installed on the user's device.

  • SSO between MSAL and Safari

SSO is achieved through the ASWebAuthenticationSession class. It uses existing sign-in state from other apps and the Safari browser. It's not limited to apps distributed by the same Apple Developer, but it requires some user interaction.

If you use the default web view in your app to sign in users, you'll get automatic SSO between MSAL-based applications and Safari. To learn more about the web views that MSAL supports, visit Customize browsers and WebViews.

This type of SSO is currently not available on macOS. MSAL on macOS only supports WKWebView which doesn't have SSO support with Safari.

Note

iOS clears session cookies right away after login due to the use of temporary browser to perform login. This browser does not share any of the session cookies. To make SSO work on iOS, KMSI must be enabled to utilize persistent cookies.

  • Silent SSO between ADAL and MSAL macOS/iOS apps

MSAL Objective-C support migration and SSO with ADAL Objective-C-based apps. The apps must be distributed by the same Apple Developer.

See SSO between ADAL and MSAL apps on macOS and iOS for instructions for cross-app SSO between ADAL and MSAL-based apps.

Silent SSO between apps

MSAL supports SSO sharing through iOS keychain access groups.

To enable SSO across your applications, you'll need to do the following steps, which are explained in more detail below:

  1. Ensure that all your applications use the same Client ID or Application ID.
  2. Ensure that all of your applications share the same signing certificate from Apple so that you can share keychains.
  3. Request the same keychain entitlement for each of your applications.
  4. Tell the MSAL SDKs about the shared keychain you want us to use if it's different from the default one.

Use the same Client ID and Application ID

For the Microsoft identity platform to know which applications can share tokens, those applications need to share the same Client ID or Application ID. This is the unique identifier that was provided to you when you registered your first application in the portal.

The way the Microsoft identity platform tells apps that use the same Application ID apart is by their Redirect URIs. Each application can have multiple Redirect URIs registered in the onboarding portal. Each app in your suite will have a different redirect URI. For example:

App1 Redirect URI: msauth.com.contoso.mytestapp1://auth
App2 Redirect URI: msauth.com.contoso.mytestapp2://auth
App3 Redirect URI: msauth.com.contoso.mytestapp3://auth

The format of redirect URIs must be compatible with the format MSAL supports, which is documented in MSAL Redirect URI format requirements.

Setup keychain sharing between applications

Refer to Apple's Adding Capabilities article to enable keychain sharing. What is important is that you decide what you want your keychain to be called and add that capability to all of your applications that will be involved in SSO.

When you have the entitlements set up correctly, you'll see a entitlements.plist file in your project directory that contains something like this example:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
    <key>keychain-access-groups</key>
    <array>
        <string>$(AppIdentifierPrefix)com.myapp.mytestapp</string>
        <string>$(AppIdentifierPrefix)com.myapp.mycache</string>
    </array>
</dict>
</plist>

Add a new keychain group

Add a new keychain group to your project Capabilities. The keychain group should be:

  • com.microsoft.adalcache on iOS
  • com.microsoft.identity.universalstorage on macOS.

keychain example

For more information, see keychain groups.

Configure the application object

Once you have the keychain entitlement enabled in each of your applications, and you're ready to use SSO, configure MSALPublicClientApplication with your keychain access group as in the following example:

Objective-C:

NSError *error = nil;
MSALPublicClientApplicationConfig *configuration = [[MSALPublicClientApplicationConfig alloc] initWithClientId:@"<my-client-id>"];
configuration.cacheConfig.keychainSharingGroup = @"my.keychain.group";

MSALPublicClientApplication *application = [[MSALPublicClientApplication alloc] initWithConfiguration:configuration error:&error];

Swift:

let config = MSALPublicClientApplicationConfig(clientId: "<my-client-id>")
config.cacheConfig.keychainSharingGroup = "my.keychain.group"

do {
   let application = try MSALPublicClientApplication(configuration: config)
  // continue on with application
} catch let error as NSError {
  // handle error here
}

Warning

When you share a keychain across your applications, any application can delete users or even all of the tokens across your application. This is particularly impactful if you have applications that rely on tokens to do background work. Sharing a keychain means that you must be very careful when your app uses Microsoft identity SDK remove operations.

That's it! The Microsoft identity SDK will now share credentials across all your applications. The account list will also be shared across application instances.

SSO through Authentication broker on iOS

MSAL provides support for brokered authentication with Microsoft Authenticator. Microsoft Authenticator provides SSO for Microsoft Entra registered devices, and also helps your application follow Conditional Access policies.

The following steps are how you enable SSO using an authentication broker for your app:

  1. Register a broker compatible Redirect URI format for the application in your app's Info.plist. The broker compatible Redirect URI format is msauth.<app.bundle.id>://auth. Replace `<app.bundle.id>`` with your application's bundle ID. For example:

    <key>CFBundleURLSchemes</key>
    <array>
        <string>msauth.<app.bundle.id></string>
    </array>
    
  2. Add following schemes to your app's Info.plist under LSApplicationQueriesSchemes:

    <key>LSApplicationQueriesSchemes</key>
    <array>
         <string>msauthv2</string>
         <string>msauthv3</string>
    </array>
    
  3. Add the following to your AppDelegate.m file to handle callbacks:

    Objective-C:

    - (BOOL)application:(UIApplication *)app openURL:(NSURL *)url options:(NSDictionary<NSString *,id> *)options
    {
        return [MSALPublicClientApplication handleMSALResponse:url sourceApplication:options[UIApplicationOpenURLOptionsSourceApplicationKey]];
    }
    

    Swift:

    func application(_ app: UIApplication, open url: URL, options: [UIApplication.OpenURLOptionsKey : Any] = [:]) -> Bool {
        return MSALPublicClientApplication.handleMSALResponse(url, sourceApplication: options[UIApplication.OpenURLOptionsKey.sourceApplication] as? String)
    }
    

If you are using Xcode 11, you should place MSAL callback into the SceneDelegate file instead. If you support both UISceneDelegate and UIApplicationDelegate for compatibility with older iOS, MSAL callback would need to be placed into both files.

Objective-C:

 - (void)scene:(UIScene *)scene openURLContexts:(NSSet<UIOpenURLContext *> *)URLContexts
 {
     UIOpenURLContext *context = URLContexts.anyObject;
     NSURL *url = context.URL;
     NSString *sourceApplication = context.options.sourceApplication;

     [MSALPublicClientApplication handleMSALResponse:url sourceApplication:sourceApplication];
 }

Swift:

func scene(_ scene: UIScene, openURLContexts URLContexts: Set<UIOpenURLContext>) {

        guard let urlContext = URLContexts.first else {
            return
        }

        let url = urlContext.url
        let sourceApp = urlContext.options.sourceApplication

        MSALPublicClientApplication.handleMSALResponse(url, sourceApplication: sourceApp)
    }